B&W ASW12CM User Manual

CM Series

ASW 12CM

Pure and Simple

Wrapped in an exquisitely lacquered cabinet, the 12 inch dual voice coil paper/

Kevlar® driver is driven and controlled by the mega efcient 500W audiophile

standard Class D amplier and switch mode power supply, delivering immense

power when the signal demands.

Technical Specications

Description

Drive units

Frequency range

Frequency response

Bass Extension

Amplier Power output:

Functions:

Inputs:

Low-pass lter

Dimensions

Net weight

Finish

Active closed-box subwoofer system

ø300mm (12 in) paper/Kevlar® cone long-throw driver ø76mm (3 in) dia voice coil - dual suspension diecast chassis

-6dB at 18Hz and 25/140Hz adjustable (EQ at A)

±3dB 25Hz – 40/140Hz adjustable (EQ at A)

-6dB at 18Hz (position A)

-6dB at 23Hz (position B)

-6dB at 28Hz (position C)

Amplier Power output: 500W Rated power consumption: 94W Standby: 0.8W Idle (ON no signal) 11.8W Input impedance: 33kΩ Signal / noise: >80dB

Input level (line in) Input level (speaker in) Low-pass lter frequency Low-pass lter bypass (line in only)

Bass extension

Bass roll-off alignment

Auto sense on/standby

Phase switch

Line In (RCA Phono) Speaker in (Binding post) 12v trigger (3.5mm jack)

Active 4th-order, variable cut-off frequency

Height: 395 mm (15.5 in) not including feet Width: 395 mm (15.5 in) Depth: 432mm (17.0 in) including grille and controls

24.5kg (54 lb)

Cabinet: Gloss Black

Grille: Black

B&W Group North America

54 Concord Street

North Reading

MA 01864-2699

United States of America

T +1 978 664 2870 F +1 978 664 4109 marketing@bwgroupusa.com www.bowers-wilkins.com

B&W Group Ltd reserves the right to amend details of the

specification without notice in line with technical developments