Buyers 1804055 User Manual

Quality since 1946

3.38

3.50

6.00

5.00

.50

6.44

" SQ.2

Ø

.66

Ø

.53

Mounting Instructions

1804055 Bolt-On Receiver Tube

Capacity:
20,000 lbs Maximum Gross Trailer Weight
2,000 lbs Maximum Vertical Tongue Load

WARNING: Do not exceed the hitch plate or
vehicle towing capacity. If you do not know
these towing capacities, contact the hitch plate
installer and/or vehicle upfitter for your hitch
plate and vehicle towing capacities.

9049 Tyler Blvd. • Mentor, Ohio 44060

Phone [phone] • Fax [phone]

Toll-Free Fax [phone] • buyersproducts.com

Mounting Instructions:

1. The Bolt-On Receiver Tube mounts to a hitch
plate utilizing two positions of the adjustable pintle
hitch hole pattern. Mount the Bolt-on Receiver
Tube with the gusset located on the bottom.

2. Bolt the receiver tube weldment to the hitch
plate using four 1/2” grade 8 bolts, lock washers
and nuts. Torque the fasteners to 100 ft-lbs. You
may use Buyer’s Products bolt kit P/N 8520.

WARRANTY

Buyers Products Co. warrants all truck/trailer hardware manufac­tured or distributed by it, to be free from defects in material and
workmanship for a period of one year from date of shipment. Parts
must be properly installed and used under normal conditions. Any
product which has been altered, including modification, misuse,
accident or lack of maintenance will not be considered under
warranty. Normal wear is excluded. The sole responsibility of
Buyers Products Co. under this warranty is limited to repairing or
replacing any part or parts which are returned, prepaid, and are
found to be defective by Buyers Products Co. Authorization from
Buyers Products Co. must be obtained before returning any part.
No charges for transpor tation or labor performed on Buyers’ prod­ucts will be allowed under this warranty.

Fig. 1

Fig. 2

3007812 Rev. A