9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • buyersproducts.com
Installation Instructions
1801212 2" Hitch
Applications
Ford F250/350 Pickup - 2008 + models
Capacity
16,000 lbs. Maximum Gross Trailer Weight (MGTW)
1,600 lbs. Maximum Vertical Load (MVL)
1. Position the hitch against the frame aligning to the eight
(four per side) bolts holes from the frame and the Flush
alignment to the end of the truck-frame. You may have
to enlarge or drill the holes larger if not existed. The
existing holes should fit the double-nut plates provided.
2. Secure the hitch to the frame with eight 5/8” bolts and
eight 5/8” nuts along with flat washers and spring
washers.
3. Optionally, on the side of the Frame, attach the support
space to mount onto the frame. You may have to enlarge
or drill a new hole for this step.
4. Secure on to the frame with one 5/8” bolt and nut.
5. Secure on to the hitch with one ½” bolt and nut.
6. Torque all bolts to 120 ft-lbs.
11
Bill of Materials
item part no. qty. descrip tion
1 3018338 1 Hitch, F250/350 Pickup - Weld
2 3018395 2 Spacer Support
3 3018574 4 Plate, Nut Double
4 – 10 Screw, Hex Cap 5/8-11 x 2 GR5 ZN
5 – 8 Washer, 5/8" Regular Split Lock, ZN
6 3018560 4 Spacer, Small w/ Hole
7 3 0 0 1127 2 Screw, HH Cap 1/3 -13 x 2 GR8 BLK OX
8 – 2 Nut, Nylock 1/2-13 Zinc
9 – 8 Washer, 5/8 SAE FLAT ZN
10
1801212-PS-F R AME
11
1801212-DS - FRAME
12 – 2 Nut, 5/8-11 Zinc
1 PS Frame
1 DS Frame
10
3
4
Fig. 1
9
4
5
2
7
8
6
12
FLUSH
ALIGNMENT
1
WARRANTY
Buyers Produc ts Co. warrants a ll tr uck/trailer hardware manufactured or distr ibuted by it, to be free from defects in material and work manship for a period of one year
from date of sh ipment. Parts must be properly ins talled and used u nder norma l conditions. Any product which has been altered, including modification, misuse, accident
or lack of maintenance wil l not be considered under warranty. Normal wear is excluded. The sole responsibil ity of Buyers Products Co. under this warranty is limited to
repairing or replacing any pa rt or parts which are returned, prepaid, and a re found to be defective by Buyers Products Co. Authorization from Buyers Products Co. must
be obtai ned before retu rning any par t. No charges for tra nspor tation or la bor performed on Buyers’ products wi ll be allowed under this wa rrant y.
1801212I NST Rev. A
Loading...