Bushnell Downloading Maps Tutorial Owner's Manual

How to download a map

Once you have logged into your account the Map Downloading page will appear on the screen.
From here you will be able to find your location and save it.

On the left side of the window you will see New Users Start Here.

Please Note: This will bring you to a screen outlining all of the steps in finding your location.

There are three ways to find your location:

-Address: You can enter specific address of your location

-Point of Interest: You can search points of interest with key words

-Coordinates: You can enter specific Lat/Lon coordinates

Once you have searched for your location it will appear on the center of the map.

You will notice on the left hand side of the screen a zoom bar that will allow you to zoom in and
out of the image.
L1- ¾ sq. mile
L2- 1 ½ sq. mile
L3- 3 sq. mile
A1- Area Capture
A2- Area Capture

Please Note: You are only available to download the images of the L1, L2, and L3 zoom levels.

On the right hand side of the screen you will see the tools box.
Base Layer:

Base: Will how a generic base map to help locate your specific location (not downloadable)
Topo: Will display a Topo map of the location in L1, L2, or L3 zoom level. (Downloadable)
Aerial: Will display an Aerial image of the location in L1, L2, or L3 zoom level.

(Downloadable)

Overlays:
Check marks on these options will display items on map.

Tools:

Add Waypoint: Will add a specific waypoint for a desired location
Add Route: Will allow you to create a route on the map
Capture Map: Will allow you to save the Map if in L1, L2, or L3 zoom levels
Area Grabber: Will allow you to save large areas of land, up to 20 tiles at once

To download your map we will have to make sure that we are in the correct zoom level and also
correct type of map.

With the correct options selected you will notice the Capture Map option light up. Select Capture
Map to save this map to your account.