Bushnell Cabelas CLR 800 Instruction Manual

Your Cabela’s CLR 800 by Bushnell®is a precision instrument designed to provide
many years of enjoyment. This booklet will help you achieve optimum performance
by explaining its adjustments and features as well as how to care for this precise
laser rangefinding instrument. To ensure optimal performance and longevity, please
read these instructions before using your CLR 800.

INTRODUCTION

Your CLR 800 is the world’s most simple to use, yet advanced laser rangefinder. Using
Digital Technology and measuring a mere 1.9 x 4.1 x 4.2 inches, the 8 ounce CLR 800
delivers superb and accurate range performance to +/- one yard. Range to a deer as
far as 300 yards out, or to a tree 600 yards away for a reference point. The single button
operation allows outdoor enthusiasts to easily measure distance with confidence.

The CLR 800 emits invisible, eyesafe, infrared energy pulses. Sophisticated digital
technology instantaneously calculates distances by measuring the time it takes for
each pulse to travel from the rangefinder, to the target, and back.

The ranging accuracy of the CLR 800 is plus or minus one yard under most
circumstances. The maximum range of the instrument depends on the reflectivity of
the target. The maximum distance for most objects is 600 yards while for highly
reflective objects the maximum is 800 yards. Note: You will get both longer and
shorter maximum distances depending on the reflective properties of the particular
target and the environmental conditions at the time the distance of an object is
being measured.

The color, surface finish, size and shape of the target all affect reflectivity and range.
The brighter the color, the longer the range. Red is highly reflective, for example, and
allows longer ranges than the color black, which is the least reflective color. A shiny
finish provides more range than a dull one. A small target is more difficult to range
than a larger target. The angle to the target also has an effect. Shooting to a target
at a 90 degree angle (where the target surface is perpendicular to the flight path of
the emitted energy pulses) provides good range while a steep angle on the other
hand, provides limited ranging. In addition, lighting conditions (e.g. the amount of
sunlight) will affect the ranging capabilities of the unit. The less light (e.g. overcast
skies) the farther the unit’s maximum range will be. Conversely, very sunny days will
decrease the unit’s maximum range.

OPERATIONAL SUMMARY

While looking through the monocular, depress the power
button once to activate the inview display system (LCD). Aim
the CLR 800 at a target at least 5 yards away, depress and
hold the power button down until range reading is
displayed. Release the power button. Note: Once activated,
the CLR 800’s LCD will remain active and display the last
distance measurement for 30 seconds. You can depress the
power button again at any time to distance to a new target.
As with any laser device, it is not recommended to directly
view the emissions for long periods of time with magnified lenses.

FEATURES

Your CLR 800’s LCD incorporates illuminated indicators that advise you unit of
measure, when the laser is active, the battery charge is low, and when a target has
been acquired. A summary of these features is presented below:

CLR 800™LASER RANGEFINDER

INSTRUCTION MANUAL

BPO Model #: 20-3125

BPO Lit. #: 98-0214/02-03

by

ILLUMINATING INDICATORS Low Battery Charge ( ) When the low battery
symbol is displayed in the upper right-hand portion of the LCD, the battery charge is
getting low and the 9-volt alkaline battery should be replaced.

Target Acquired: Informs the user that a distance measurement has been obtained.
The message "TARGET ACQUIRED" will appear in the top portion of the LCD. The
distance measured will appear at the bottom of the LCD in numerical form.

SPECIFICATIONS

OPTICAL DESIGN The CLR 800 features a Perma Focus monocular optical system

for viewing your target. A liquid crystal display (LCD) is mounted within the optical
system and when activated, displays a reticle for targeting, yards, and low battery
indicators. Inherent in the manufacturing process are small black spots that appear
in the optical system. These are a natural characteristic of the LCD and cannot be
fully eliminated in the manufacturing process. They do not affect the distancing
performance of the unit.

Dimensions: Pocket Size, measuring 1.9 x 4.1 x 4.2 inches
Weight: 8 oz.
Accuracy: +/- 1 yard
Magnification: 5x
Display: LCD (even and odd numbers)
Power Source: 9 volt alkaline battery (user supplied)
FOV: 341 ft. @ 1000 yards
Total Eye Relief: 19mm
Exit Pupil: 4 mm
Single Button Operation
Water resistant
5-yard minimum, 800 yards to a reflective target, 600 yards to a tree, 300 yards to a deer
Includes case and strap

CLEANING

We suggest using the Cabela’s lens pen as an effective tool for keeping your
CLR 800 in top condition. However, you may also gently blow away any dust or debris
on the lenses (or use a soft lens brush). To remove dirt or fingerprints, clean with a
soft cotton cloth, rubbing in a circular motion. Use of a coarse cloth or unnecessary
rubbing may scratch the lens surface and eventually cause permanent damage. For
a more thorough cleaning, photographic lens tissue and photographic-type lens
cleaning fluid or isopropyl alcohol may be used. Always apply the fluid to the
cleaning cloth - never directly on the lens.

TROUBLE SHOOTING TABLE

If unit does not turn on - LCD does not illuminate:

• Depress power button.

• Check and if necessary, replace battery.

If unit powers down (display goes blank when attempting to power the laser):

• The battery is either weak or low quality. Replace the battery with a good quality
alkaline battery. Heavy Duty alkaline batteries are NOT recommended.

There is no reset button to clear last range reading before ranging another target:

• The last range reading does not need to be cleared before ranging another target.
Simply aim at the new target using the LCD’s reticle, depress the power button and
hold until new range reading is displayed.

If target range cannot be obtained:

• Make sure LCD is illuminated.

• Make sure that the power button is being depressed

• Make sure that nothing, such as your hand or finger, is blocking the objective

lenses (lenses closest to the target) that emit and receive the laser pulses.

• Make sure unit is held steady while depressing power button.