Bushnell 119512B Instruction Manual

Digital Land Camera

w/Night Vision

Instruction Manual

Model#: 119512B

Lit# 98-2189/02-12

Page Index

Introduction 5 Parts & Controls Guide 6-7 Battery and SD Card Installation 8 About the Setup Menu 9 Using the Setup Menu 9 SETUP MENU REFERENCE TABLE 10-11 Camera Operation 12 Mount the Camera 12 Power on the Camera 12 Test the Coverage Area 13 Secure the Camera 13 Viewing the Photos and Videos 14

Glossary 15 Technical Specications 16 Troubleshooting/FAQ 17-20

IMPORTANT NOTE

Congratulations on your purchase of one of the best Land cameras on the market! Bushnell is very proud of this little unit and we are sure you will be pleased with it as well. We appreciate your business and want to earn your trust. Please refer to the notes below and the instructions in this manual to ensure that you are completely satised with this product.

If your Bushnell Land Cam does not seem to be functioning properly or if you are having photo/video quality issues, please check the Troubleshooting/FAQ section on pages 18-21. Problems are often due to something simple that was overlooked, or require only changing one setting to solve.

If your problem continues after trying the solutions in the Troubleshooting/FAQ section, please call Bushnell Customer Service at (800) 423-3537. In Canada, call (800) 361-5702.

Bushnell recommends using 4 Energizer® Lithium AA batteries in this

Land Cam to obtain maximum battery life.

Do Not Mix Old and New Batteries

Do not mix battery types-use ALL lithium or ALL alkaline.

Rechargeable batteries are not recommended.

Bushnell recommends using SanDisk® SD and SDHC Cards

(up to 32GB capacity) in this Land Cam.

INTRODUCTION

Congratulations on your purchase of the Bushnell 119512B Digital Land Camera. This camera is designed to record human or animal activity in the outdoors with its still image and movie modes and weatherproof, rugged construction. Your Land Cam features a compact, portable size and an extra long battery life.

Main Features:

• 5.0 MP digital sensor

• Compact Size (120mm*94mm*46mm)

• Long Battery Life (Up to 6 months)

• Trigger Time=1.3 seconds or less

• Automatic IR Filter

• LCD Display

• 18 Night Vision LEDs

• Adjustable Photo Delay: 5~ 59 second ,1~ 10mins (default 10S)

• Multiple Shot Mode (3 images per trigger)

• 640*480 at 30 FPS Videos

• Supports up to 32 GB SD Card

• Date, Time & Moon Phase Imprint

• Auto Exposure

• Auto White Balance

• Power Supply: 4 AA batteries (lithium or alkaline)

• Mounting Socket for Standard Tripods

• Weatherproof

Parts and Controls Guide

PIR Motion Sensor

Camera

Lens

Light

Sensor

Padlock Hole

Infrared LED Array

Tripod Socket

Front of Camera

PIR Indicator

(Setup Mode Only

IR LED Array Detail

Parts and Controls Guide

USB Port

SD Card

Slot

Battery

Compartment

LCD Display

Power Switch

Control Panel

(Front Unlatched & Opened)

Control Panel Detail

BATTERY and SD CARD INSTALLATION

The Bushnell 119512B Digital Land Camera is designed to operate using 4 AA batteries. We recommend using Lithium (for longest life) or Alkaline batteries.

NOTE: Always set the power switch to the OFF position when installing or removing batteries.

Please make sure the batteries are inserted correctly, as indicated inside the battery compartment. Incorrect voltage or polarity (+/-) will damage the camera.

Do not mix old and new batteries. Do not mix battery types-use ALL lithium or ALL alkaline. Rechargeable batteries are not recommended.

Memory

Your 119512B Digital Land Camera has a memory card slot, to accept SD cards up to 32GB max. capacity (sold separately).

Inserting an SD card

• Make sure the power switch is in the OFF position whenever adding or removing memory.

• Insert an SD card into the card slot completely and oriented correctly as shown by the icon above the slot (label up, contacts facing down and notched corner on the right).

• To remove the SD memory card, depress the SD card and pull out the card gently.

Using a new, blank SD card is recommended. If the SD card has been used in another device, please make sure to format using the Format option in the Land Camera’s Setup menu before you set the camera to capture photos/videos. New cards are ready to use straight from the package.

+ 16 hidden pages