Bushnell 1000 User Manual [en, de, es, fr, it]

SCOUT

1000

Sku# 201932/201942

Literature #: 98-1358/07-11

Power

eyePiece

Mode

triPod Mount

English. . . . . . . . . . . . . . . . 4

French. . . . . . . . . . . . . . . . 27

Spanish. . . . . . . . . . . . . . . 52

German. . . . . . . . . . . . . . . 77

Italian. . . . . . . . . . . . . . . . . 102

Portuguese. . . . . . . . . . . . . . 127

Congratulations on your purchase of the Bushnell® Scout™1000 ARC™ Laser Rangeﬁnder. The

Scout™1000 ARC is a precision Laser Rangeﬁnding optical instrument designed to provide many years

of enjoyment. This booklet will help you achieve optimum performance by explaining its adjustments and

features as well as how to care for this device. To ensure optimal performance and longevity, please read

these instructions before using your Scout™1000 ARC laser rangeﬁnder.

HOW OUR DIGITAL TECHNOLOGY WORKS

The Scout™1000 ARC™ emits invisible, eye safe, infrared energy pulses. The Scout ™ 1000‘s Advanced Digital microprocessor and ASIC chip (Application-Speciﬁc Integrated Circuit) results in instantaneous and accurate readings every time. Sophisticated digital technology instantaneously calculates distances by measuring the time it takes for each pulse to travel from the rangeﬁnder, to the target, and back.

RANGING ACCURACY

The ranging accuracy of the Scout™1000 is plus or minus one yard / meter under most circumstances. The maximum range of the instrument depends on the reﬂectivity of the target. The maximum distance for most objects is 650 yards / 594 meters while for highly reﬂective objects the maximum is 1000 yards / 914 meters. Note: You will get both longer and shorter maximum distances depending on the reﬂective properties of the particular target and the environmental conditions at the time the distance of an object is being measured.

The color, surface ﬁnish, size and shape of the target all affect reﬂectivity and range. The brighter the color, the longer the range. White is highly reﬂective, for example, and allows longer ranges than the color black, which is the least reﬂective color. A shiny ﬁnish provides more range than a dull one. A small target is more difﬁcult to range than a larger target. The angle to the target also has an effect. Shooting to a target at a 90 degree angle (where the target surface is perpendicular to the ﬂight path of the emitted energy pulses) provides good range while a steep angle on the other hand, provides limited ranging. In addition, lighting conditions (e.g. the amount of sunlight) will affect the ranging capabilities of the unit. The less light (e.g. overcast skies) the farther the unit’s maximum range will be. Conversely, very sunny days will decrease the unit’s maximum range.

GETTING STARTED

INSERTING THE BATTERY

Remove the battery cap with a coin by rotating the cap counter clockwise and insert a 3-volt lithium battery into the compartment positive end ﬁrst, then replace the battery cap.

NOTE: It is recommended that the battery be replaced at least once every 12 months.

Low Battery Indicator: If the “

” is displayed within the in-view readout, this means “low battery”

or battery charge is getting low and the 3-volt lithium battery should be replaced.

OPEN

WIDE END OF BATTERY CAP

NARROW END OF BATTERY CAP

ADJUSTING THE EYEPIECE

Your Scout™ 1000 is constructed with an adjustable eyepiece (+/- 2 Diopter Adjustment) that allows one to focus the LCD display relative to the image. For users without eyeglasses, simply rotate the eyepiece until the reticle and object distanced to are in focus to your eye. If you wear glasses, make sure the eyecup is folded in the down position as this will bring your eye closer the eyepiece lens allowing you to see a full ﬁeld of view and then rotate the eyepiece until the reticle and object distanced to are in focus to your eye.

OPERATIONAL SUMMARY

While looking through the 5x eyepiece, depress the power button once to activate the in-view Liquid Crystal Display (LCD). Place the aiming circle (located in the center of the ﬁeld of view) upon a target at least 5 yards away, depress and hold the power button down until the range reading is displayed near the bottom of the in-view display. Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired, you can release the power button. The crosshairs surrounding the aiming circle will disappear once the power button has been released (i.e. the laser is no longer being transmitted). Note: Once activated, the LCD will remain active and display the last distance measurement for 30 seconds. You can depress the power button again at any time to distance to a new target. As with any laser device, it is not recommended to directly view the emissions for long periods of time with magniﬁed lenses. The maximum time the laser is transmitted (ﬁred) is 10 seconds. To re-ﬁre, press the button down again.

LIQUID CRYSTAL DISPLAY (LCD) INDICATORS

Your Scout™ 1000 LCD incorporates illuminated indicators that advise the user unit of measure, when the laser is actively ﬁring, when a target has been acquired, and targeting modes. A summary of these features is presented below:

UNIT OF MEASURE OPTIONS

The Scout™ 1000 can be used to measure distances in yards or meters. The unit of measure indicators are located in the lower right portion of the LCD. To select between yards and meters, press and release the POWER button to turn on the unit (on top of the unit), look through the eyepiece, depress the “MODE” button (left side of the unit) and hold it down for approximately 5 seconds. The word “SETUP” will appear at the top if the LCD display and the current unit of measure, “Y” for yards or “M” for Meters will ﬂash in the LCD and the SETUP icon will still be displayed. Pressing the MODE button will toggle the unit of measure. When the desired unit of measure is displayed, press the POWER button to accept the unit of measure and to return to the normal operating menu. The Scout™ 1000 will return to the last unit of measure setting used each time the unit is turned on.

ACTIVE LASER

Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired, you can release the power button. The crosshairs surrounding the circle will disappear once the power button has been released (i.e. the laser is no longer being transmitted).

SELECTIVE TARGETING™ MODES The Scout™ 1000 was especially designed with hunters in mind. The selective targeting modes allow you to adjust the performance parameters of the unit to suit your speciﬁc situation and environment. To move from one mode to another, press the POWER button once to turn on the unit. While looking through the eyepiece, press the MODE button and quickly release. The different targeting modes available and mode indicators are listed below:

Standard with Automatic SCAN (LCD Indicator – none) This setting allows most targets to be distanced up to 1000 yards. Used for moderately reﬂective targets that are typical of most distancing situations. The minimum distance in the standard mode is 5 yards. To use the Automatic SCAN feature, simply hold down on the POWER button for approximately 3 seconds and move the rangeﬁnder from object to object while leaving the POWER button depressed. Automatic SCAN will allow the range to be continuously updated as multiple objects are targeted.

BullsEye™ (LCD Indicator -

small targets and game without inadvertently getting distances to background targets that have stronger signal strength. When more than one object has been acquired, distance of the closer object will be displayed and a crosshair will surround the BullsEye™ indicator informing the user that distance to the closer object is being displayed in the LCD.

) This advanced mode allows easy acquisition of

Once in this mode, press the POWER button to turn the unit on. Next, align the aiming circle onto the object (i.e. deer) that you want distance to. Next, press and hold the POWER button and move the laser slowly over the deer until crosshairs surround the BullsEye indicator. If the laser beam recognized more than one object (i.e. deer and background trees), distance of the closer object (i.e. deer) will be displayed and crosshairs will surround the BullsEye indicator informing the user that distance to the closer object is being displayed in the LCD (Figure 1). There may be times when only the laser beam only sees one object in its path. In this case, the distance will be displayed, but because more than one object was not acquired, crosshairs will not surround the BullsEye indicator.

Figure 1

TIP: While pressing the POWER button, you can move the device slowly from object to object and intentionally force the laser to hit multiple objects to ensure that you are only displaying the closest of the objects recognized by the laser.

Brush™ (LCD Indicator -

and tree branches to be ignored so that distance only to background objects are displayed. When more than one object has been acquired, distance of the further object will be displayed and a circle will surround the Brush™ indicator informing the user that distance of the farthest object is being displayed in the LCD.

Once in this mode, press the POWER button to turn the unit on. Next, align the aiming circle onto the object that you want distance to. Next, press and hold the POWER button and move the laser slowly over the object until a circle surrounds the Brush indicator. If the laser beam recognized more than one object (i.e. close-up tree branch and a deer in the background), distance of the further object (i.e. deer) will be displayed and a circle will surround the brush indicator informing the user that distance to the farther object is being displayed in the LCD (Figure 2). There may be times when only the laser beam only sees one object in its path. In this case, the distance will be displayed, but because more than one object was not acquired, the circle will not surround the Brush indicator.

) This advanced mode allows objects such as brush

Figure 2

Once the device has shut off, the unit will always default back to the last targeting mode used.

OPTICAL DESIGN

Magniﬁcation and Coatings

The Scout™1000 ARC™ features 5x magniﬁcation and Multi-Coated optics. A liquid crystal display (LCD) is mounted within the optical system and when activated, displays a reticle for targeting, yards / meters, and Mode indicators. Inherent in the manufacturing process are small black spots that appear in the optical system. These are a natural characteristic of the LCD and cannot be fully eliminated in the manufacturing process. They do not affect the distancing performance of the unit.

RAINGUARD™ HD

The outer surfaces of the objective and eyepiece lenses are coated with RainGuard™ HD. RainGuard™ HD is Buhsnell’s permanent, patented, hydrophobic (water repellant) lens coating the prevents fogging by causeing condensation from rain, sleet, snow or even your own breath to bead up into much smaller droplets than on standard coatings. Smaller uniform droplets scatter less light which results in a clearer, brighter view.

TRIPOD MOUNT

Molded into the bottom of your Scout™ 1000 is a threaded tripod mount that will allow you to attach a tripod for a more stable operation during long periods of use.

Scout 1000™ with ARC™ (Angle Range Compensation): In addition to all of the features described

above, the Scout™ 1000 ARC™ is an advanced premium laser rangeﬁnder featuring a built-in accelerometer-based inclinometer that digitally displays the exact angle from -60 to +60 degrees of elevation and is +/- 1.0 degree accurate.

The Bushnell® Scout™1000 with ARC™ solves a problem hunters have been faced with for years. The problem: Bow and riﬂe hunters have struggled with extreme uphill and downhill angles because of how these angles alter true horizontal distance to your target. The Solution: ARC’s integrated inclinometer provides elevation angle to allow for distance compensation when targeting objects that are either uphill or downhill. This data is then combined with internal algorithmic ballistic formulas.

ARC (Angle Range Compensation) Modes

Bow Mode ( ): Displays line of sight distance, degree of elevation, and true horizontal distance from

5-99 yards / meters and a maximum inclination of +/- 60°.

Riﬂe Mode ( ): Calculates and displays the amount of bullet drop, at the target in inches or

centimeters. The amount of bullet drop is determined by the line of sight distance to the target, degree of elevation, along with the speciﬁc ballistic characteristics of the caliber and ammunition load. When you range your target, the line of sight, degree of elevation, and bullet-drop/holdover in inches or centimeters will be displayed from 100 to 800 yards/meters with a maximum inclination of +/- 60°. One of eight ballistic groups (identiﬁed as A, B, C, D, E, F, G, and H) for center ﬁre riﬂes and two ballistic groups (Identiﬁed as I and J) for Black Powder / Muzzleloaders can be selected by the user, with each formula representing a given combination of caliber and loads. The ballistic groups are selected by the user in the SET-UP menu.

Regular Mode

instead, line of sight distance only.

MENU SETUP – SELECTION of BOW, RIFLE, REGULAR MODES and UNIT OF MEASURE

There are two ARC (Angle Range Compensation) modes and one REGULAR mode. The two ARC modes are BOW mode and RIFLE mode.

To select between these modes, ﬁrst turn the unit “ON” by pressing and releasing the POWER button. Next, press and hold the MODE button for ﬁve seconds. The “SETUP” display icon will light and the current compensation mode will be identiﬁed by either the “BOW” symbol ( ( ) lit with one of the ballistic groups (A thru J) displayed and ﬂashing, or no indicators lit and the

message (

The modes can be cycled through in a circular fashion by pressing and releasing the mode button. The order of modes is a follows: BOW, RIFLE A, RIFLE B, RIFLE C, RIFLE D, RIFLE E, RIFLE F, RIFLE G, RIFLE H, RIFLE I, RIFLE J, REG, etc. When the bow selection is displayed, the “BOW” icon will ﬂash and when a “RIFLE: selection is displayed, the “RIFLE” icon will be steady, but the ballistic group will be ﬂashing

toward the bottom of the LCD. When the ( bottom of the LCD.

Once the desired distance compensation mode is displayed, select it by pressing and releasing the POWER button. Following this selection, the current unit of measure, “Y” for yards or “M” for meters will ﬂash in the LCD and the SETUP icon is still lit. Pressing the MODE button will toggle the unit of measure. When the desired unit of measure is displayed, press the POWER button to accept the unit of measure

( ): This mode does not provide any degree of elevation or compensated distance, but

), the “RIFLE symbol

) ﬂashing in the bottom of the LCD.

) is displayed, the message ( ) will ﬂash near the

and to return to the normal operating menu. Upon returning to the normal operating menu, the current compensation mode and unit of measure will be identiﬁed in the LCD as indicated below.

SETUP menu Normal Operating Menu

When the unit automatically powers down, operation will always return to the normal operation (i.e. away from SETUP) with the last used ARC mode active (i.e. BOW, RIFLE, or REGULAR) along with the last used TARGETING modes active (Standard SCAN, BULLSEYE, or BRUSH). If the unit turns off while in the SETUP menu, the unit will always return to the last mode(s) still active.

Once the range is displayed, continue to hold the POWER button down for approximately 2 seconds while holding the aiming circle on the object and keeping the unit as steady as possible so as to allow the inclinometer enough time to measure angle. Then release the POWER button. Once you have released the power button, a degree of angle and compensated range will be displayed beneath the line of sight distance as seen in the images below.

BOW MODE EXAMPLE

Line of sight is 32 yards, angle is -44 degrees, and the Angle Range Compensated distance is 23 yards. The “

” means “play” or “shoot as,” so instead of shooting as 32 yards, shoot as 23 yards. If you were

to shoot as if 32 yards, you would shoot over the top of the deer because of the severe angle.

If in BOW mode, the line of sight distance will display in the primary numeric display and the inclination and horizontal distance will display in the secondary numeric displays. Bushnell determined through extensive testing and interviews with high-proﬁle bow hunting experts that multiple bow ballistic groups were not necessary. Bow-hunters want to know true horizontal distance because that is how they practice shooting, and once they conﬁdently know that, they can make any necessary adjustments. Giving the bow-hunter anything else other than horizontal distance creates additional confusion and uncertainty.

Many people mistakenly believe that uphill shots perform differently from downhill shots because of gravity. However, it is not due to gravity, but more of an aberration of the sighting system used on bows.

The sighting pin on a bow resides several inches above the mechanical axis of the arrow. For example, when one is aiming 23 degrees up an incline, the arrow is at a different angle.

RIFLE MODE EXAMPLE

Line of sight is 376 yards, angle is -33 degrees, and the bullet-drop/holdover is 28 inches. ARC not only takes into account ballistic data based off your caliber and load from distances of 100-800 yards, but also compensates for any uphill and downhill angles which also affect bullet-drop.

If in RIFLE mode, the ballistic group will be displayed in the bullet drop numeric ﬁeld anytime that the primary numeric display is showing dashes (i.e. no target acquired). When a target is acquired in RIFLE mode, the line of sight distance will display in the secondary numeric displays. The “IN” icon (i.e. inches) will light next to the bullet drop numeric display, if the unit of measure is set to Yards (Y). If the unit of measure is set to Meters (M), the bullet drop will be calculated and displayed in centimeters and the “IN” icon will be turned off. If the bullet drop / hold over number is blinking, this means the user should add 100 to the number blinking.

REGULAR MODE

This mode does not provide any degree of elevation or compensated distance, but instead, line of sight distance only. The will still appear below the line of sight numeric display, but there will not be any information displayed in this secondary numeric display.

Regular Mode

KNOWING WHICH BALLISTIC GROUP TO SELECT

Bushnell engineers have worked with Sierra® Bullets’ ballistic programs and grouped many of the most popular calibers and loads into eight ballistic groups (A,B,C,D,E,F,G,H). Once you know what caliber

and load you are shooting simply look through the chart to determine which one of the eight ballistic groups match with your particular load and caliber. For Muzzleloaders, we have worked with PowerBelt Bullets to incorporate ballistic data into two ballistic groups (I and J).

POPULAR CALIBER & LOAD COMBINATIONS BALLISTIC GROUP

Federal Cartridge.224 dia. 22-250 Rem, 55 gr. Bear Claw at 3600 fps G Federal Cartridge.224 dia. 22-250 Rem, 60 gr. Partition at 3500 fps F Remington Arms .224 dia. 22-250 Remington Arms , 50 gr. V-Max at 3725 FPS H Remington Arms .224 dia. 22-250 Remington Arms , 55 gr. PSP at 3680 FPS G Winchester .224 dia. 22-250 Rem, 55 gr. Ballistic Silvertip at 3680 FPS H Winchester .224 dia. 22-250 Rem, 55 gr. PSP at 3680 FPS G Federal Cartridge .277 dia. 270 Win, 150 gr. Ballistic Tip at 3060 fps F Federal Cartridge .277 dia. 270 Win, 150 gr. Partition at 3000 fps F Remington Arms .277 dia. 270 Win, 140 gr. PSPCL Ultra at 2925 FPS E Remington Arms .277 dia. 270 Win, 150 gr. SPCL at 2850 FPS D Winchester .277 dia. 270 Win, 150 gr. Partition Gold at 2930 FPS E Winchester .277 dia. 270 Win, 150 gr. PP-Plus at 2950 FPS E Federal Cartridge .308 dia. 30-06 Spring, 180 gr. AccuBond at 2700 FPS D Federal Cartridge .308 dia. 30-06 Spring, 180 gr. Bear Claw at 2700 FPS D Remington Arms .308 dia. 30-06 Springﬁeld, 180 gr. A-Frame at 2700 FPS D Remington Arms .308 dia. 30-06 Springﬁeld, 180 gr. BRPT at 2700 FPS D Winchester .308 dia. 30-06 Sprg, 180 gr. FailSafe at 2700 FPS D Winchester .308 dia. 30-06 Sprg, 180 gr. Partition Gold at 2750 FPS D Federal Cartridge.308 dia. 300 WSM, 180 gr. AccuBond at 2960 fps F Federal Cartridge.308 dia. 300 WSM, 180 gr. Bear Claw at 3025 fps F Winchester .308 dia. 300 WSM, 180 gr. Ballistic Silver Tip at 3010 FPS F Winchester .308 dia. 300 WSM, 180 gr. Fail Safe at 2970 FPS F Remington Arms .308 dia. 300 R.S.A.U.M., 180 gr. PSPCL Ultra at 2960 FPS E Remington Arms .308 dia. 300 Wby Mag, 180 gr. PSPCL at 3120 FPS F

Above are a few of the most popular caliber / load combinations. The enclosed Ballistics CD contains approximately 1000 caliber and load combinations. Simply load the CD into your computer CD drive and follow the instructions on your screen. This complete list can also be found on Bushnell’s website (www.bushnell.com).

After you have determined which ballistic group corresponds to your caliber and load, select this ballistic group (See MENU SETUP above).The internal formula will determine amount of bullet drop / holdover in inches or centimeters based upon distance, angle, and ballistics of your caliber and load.

NOTE: All bullet drop / holdover data for ballistic settings A, B, C, D, E, F, G, and H assumes the riﬂe has been sighted in at 100 yards. Bullet drop / holdover date for ballistic setting I and J assume the muzzleloader has been sighted in at 150 yards.

This state-of-the-art digital technology allows the hunter or shooter to know precisely where to hold for an effective shot. This information should be treated as a helpful guide or tool and in no way should it ever replace practice and familiarity with your riﬂe, cartridge and load. We encourage practice shooting at different ranges so you know how your riﬂe, cartridge and load will perform under various conditions. Always know what is behind your bullet; if you don’t know, don’t take the shot.

EXAMPLE

You have a 300 WSM and are shooting the following Winchester brand load: 180 gr. Ballistic Silver Tip bullet at 3010 FPS muzzle velocity. This combination falls under Ballistic Group “F”. After setting the rangeﬁnder to ballistic group “F”, go to the range and sight in your riﬂescope at 100 yards. If you then take a shot at a target at 317 yds, the bullet drop will be 9 inches. If the shot is at angle of 27 degrees upward, then the corrected bullet drop will be 8 inches.

WHAT IF YOUR CALIBER IS NOT LISTED?

While we have taken great care to include as many calibers and brand names in our ballistics tables, new loads are always being developed. In addition, some shooters load their own ammunition with unique ballistic characteristics. If you cannot ﬁnd your load in our ballistic tables, you can still use the bullet drop feature of the laser rangeﬁnder. As above, sight in your riﬂe at 100 yds. Then shoot the riﬂe, without adjusting the riﬂescope, at 300 yds. Measure the bullet drop from the point of aim. Using this drop, select the ballistic group from below. If you will be shooting longer distances then you may want to check the bullet drop at 500 yds. Because there is enormous variation in riﬂe barrels, chambers, and hand loads, you should thoroughly test the ballistic setting before actual hunting. You may need to move up or down one group depending upon your tests.

If Bullet Drop is: @300 yds @300 m @500 yds @500 m

Use: A 25-31 inches 63-79 cm 114-146 inches 291-370 cm B 20-25 inches 50-63 cm 88-114 inches 225-291 cm C 16-20 inches 40-50 cm 72-88 inches 182-225 cm D 13-16 inches 34-40 cm 61-72 inches 155-182 cm E 12-13 inches 30-34 cm 55-61 inches 139-155 cm F 10-12 inches 25-30 cm 47-55 inches 119-139 cm G 8-10 inches 20-25 cm 39-47 inches 99-119 cm H Less than 8 inches Less than 20 cm

Less than 39 inches

Less than 99 cm

SPECIFICATIONS:

Dimensions: Measuring 4.3 x 2.9 x 1.7 inches Weight: 6.7 oz. Ranging Accuracy: +/- 1 yard Range: 5-1000 Yards / 5-914 Meters Magniﬁcation: 5x Objective Diameter: 24 mm Optical Coatings: Multi-Coated RainGuard HD Coating Display: LCD Power Source: 3-volt lithium (included) Field Of View: 367 ft. @ 1000 yards Extra Long Eye Relief: 21mm Exit Pupil: 4.8 mm Built-In Tripod Mount Includes battery, carrying case and strap

CLEANING

Gently blow away any dust or debris on the lenses (or use a soft lens brush). To remove dirt or ﬁngerprints, clean with a soft cotton cloth, rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning ﬂuid or isopropyl alcohol may be used. Always apply the ﬂuid to the cleaning cloth - never directly on the lens.

TWO-YEAR LIMITED WARRANTY

Your Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department.

Any return made under this warranty must be accompanied by the items listed below:

1) A check/money order in the amount of $10.00 to cover the cost of postage and handling

2) Name and address for product return

3) An explanation of the defect

4) Proof of Date Purchased

5) Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the address listed below:

IN U.S.A. Send To: IN CANADA Send To:

Bushnell Outdoor Products Bushnell Outdoor Products Attn.: Repairs Attn.: Repairs 8500 Marshall Drive 25A East Pearce Street, Unit 1 Lenexa, Kansas 66214 Richmond Hill, Ontario L4B 2M9

For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information.

In Europe you may also contact Bushnell at:

BUSHNELL Outdoor Products Gmbh European Service Centre MORSESTRASSE 4 D- 50769 KÖLN GERMANY Tél: +49 (0) 221 709 939 3 Fax: +49 (0) 221 709 939 8

This warranty gives you speciﬁc legal rights.

You may have other rights which vary from country to country.

TROUBLE SHOOTING TABLE

If unit does not turn on - LCD does not illuminate:

•DepressPOWERbutton.

•Checkandifnecessary,replacebattery.

If unit powers down (display goes blank when attempting to power the laser):

•Thebatteryiseitherweakorlowquality.Replacethebatterywithagoodquality

3 -volt lithium battery.

If target range cannot be obtained:

•MakesureLCDisilluminated.

•Makesurethatthepowerbuttonisbeingdepressed.

•Makesurethatnothing,suchasyourhandornger,isblockingtheobjectivelenses(lensesclosest

to the target) that emit and receive the laser pulses.

•Makesureunitisheldsteadywhiledepressingpowerbutton.

NOTE: The last range reading does not need to be cleared before ranging another target. Simply aim

at the new target using the LCD’s reticle, depress the power button and hold until new range reading is displayed.

Speciﬁcations, instructions, and the operation of these products are subject to change without notice.

FCC NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandreceiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

FDA SAFETY

Class 1 laser product in accordance with IEC 60825-1:2007. Complies with 21 CFR 1040.10 and 1040.11 for laser products except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.

Caution: There are no user controls, adjustments or procedures. Performance of procedures other than those speciﬁed herein may result in access to invisible light

FRENCH

SCOUT

1000

Français

Sku# 201932/201942

Lit. #: 98-1358/07-11

MarcHe/arrÊt (aliMentation)

oculaire

Mode

Monture de tréPied

Nous vous félicitons pour l’achat de votre télémètre laser Bushnell® Scout™1000 ARC™. Le Scout™1000

ARC™ est un instrument optique de télémétrie laser de précision conçu pour offrir de nombreuses années

d’utilisation. Ce manuel décrit les différents réglages et fonctions, ainsi que l’entretien de l’appareil, aﬁn

d’obtenir des résultats optimum. Pour assurer des performances et une longévité optimum, veuillez lire

ces instructions avant d’utiliser votre télémètre laser Scout™1000 ARC™.

+ 125 hidden pages