Page 1
Bush Hog
®
TOUGH
2715Legend
NEW
Flex Wing Cutter
Bush Hog TOUGH
Just Got Tougher
The Bush Hog TOUGH 2715Legend
sets a new standard for flex wing cutter
Bush Hog TOUGH Just Got Tougher
performance the first day on the job
The Bush Hog TOUGH 2715Legend sets a new standard for flex wing cutter
and for years to come. It’s authentic
performance the first day on the job and for years to come. It’s authentic
Bush Hog. With 10 Bush Hog
Bush Hog. With 10 Bush Hog TOUGH features.
TOUGH features
.
Page 2
BUSH HOG...
Choose The Original.
Get everything that made Bush Hog flex wing
cutters famous and a whole lot more
Bush Hog is the original. Bush Hog is the number one rotary cutter manufacturer. Bush
Hog flex wings have been the best selling rotary cutters for more than 30 years. They
mow more acres than any other rotary cutter brand. They are a legend in the industry.
They set the standard for rotary cutters. Now the Bush Hog 2715Legend sets a new
standard for flex wing cutters and for all rotary cutters. Now the TOUGH are TOUGHER.
Bush Hog
2715Legend
NEW
Flex Wing Cutter
®
TOUGH
Page 3
10 Bush Hog TOUGH Features
1. TOUGH EZ Clean Double Deck sheds water and debris — decks
total over 1⁄4-inch thick steel and are tied directly to strong backs. They are
curved to shed water and debris and have drain holes for condensation.
2. TOUGH Between Deck Structure absorbs shock for long deck
life—3/8-inch tie bars connect hinge rails and hydraulic cylinder base
mounting lugs into one structure. Hydraulic cylinder lugs on wings are tied
into gearbox stand that extends from the side band to the hinge rail to
form one single strong structure.
3. TOUGH Distribution Baffles keep debris in each cutting circle to
prevent windrows. Baffles are constructed of 7-gauge steel and attached
with bolts for quick removal.
4. TOUGH Spring Steel Cushions absorb shock loads. Cushions are
strategically located at the axle where shock loads occur.
5. TOUGH Axles that can take bruising punishment. Axles are equipped
with easy-to-reach grease fittings and use strong retaining bolt through the
pivot pin.
2.
C
B
A
C
B
1.
3.
E
G
D
F
2. TOUGH Between Deck Structure
absorbs shock for long deck life—3/8-inch tie
bars (A) connect hinge rails (B) and hydraulic
cylinder base mounting lugs (C) into one
structure; hydraulic cylinder lugs (D) on wings
are tied into gearbox stand (E) that extends
from the side band (F) to the hinge rail (G) to
form one single strong structure.
4.
5.
Page 4
Mean Better Performance
Today & Tomorrow
9.
7.
6.
6. TOUGH Wing Skids
mounted on the outside of wings and turned up at 45 degree angle to
reduce dig in on turns.
7. TOUGH Pivot Points are built to stand up to constant heavy loads.
Pivot points are easy to grease from the top, made of hardened steel,
use replaceable bushings, feature Grade 5 steel pins, use 3/8-inch
steel gussets.
8. TOUGH Long-Lasting Turnbuckles make adjustments easy now
and for years to come. Turnbuckles are easy to reach for leveling
adjustments and easy to grease for long life and easy turning.
9. TOUGH Drivelines are built to last. Rugged driveline is designed
for easy maintenance. Rear and front grease fitting align so they are
easy and quick to service.
10. TOUGH Perma-Level® Hitch remains level on tractor drawbar.
Bolt retainer adds additional strength to pivot pin.
that last. Skids are built of 7-gauge steel,
8.
10.
Page 5
Bush Hog
®
TOUGH
NEW
2715 Flexwing Cutter
Cutting Width 15 ft.
PTO 540 or 1000 RPM
Hitch Perma-Level Hitch or 2-inch ball
Minimum tr
Side Band
Blade Holder Round
Blades 1/2-inch x 4-inch
Blade Overlap 6-inch
PTO Drivelines 540 PTO, ASAE Cat. 5 C.V. or Cardan/jackshaft
1000 PTO, ASAE Cat. 4, 1 3/8 or 1 3/4 CV or Cardan/jackshaft
Wing Drivelines ASAE cat 4 with slipclutch
Wing Flex
Splitter Gearbox
Center And Wing Gearbox 205 HP
Jack Stand
Blade Tip Speed 16,000 ft/min
Cutting Capacity 3 1/2-inch diameter
Cutting Height 2-inch to 14-inch
Top Deck 11
Bottom Deck 10 gauge
Axle Tube Pivots
Axle Arm Pivots
Wing
Adjustment Greasable turnbuckles
Grass Baffles Standard
Hydraulic Height Control
Safety Tow Chain Standard
Deck Rings Optional
actor requirement 60 HP
1/4-inch x 12 1/2-inch
Built into tongue
Standard
2715 Flex Wing Cutter
90° up to 22° down
235 HP
gauge
Greasable bushings
Greasable
Warranty •1-year unit structure limited warranty
Authentic Bush Hog® Bush Hog brand rotary cutters are famous for their durability. They deliver quality performance the first day
on the job and for years into the future. All Bush Hog brand products deliver durability that means long-term performance.
Be sure you buy authentic Bush Hog. Look for the charging hog and the brand name Bush Hog.
•6-year gearbox limited warranty
www.bushhog.com
Bush Hog®, L.L.C.
P.O. Box 1039 Selma, AL 36702-1039
(334) 874-2700
©November 2006 Bush Hog, LLC
Loading...