
Bushcomm
HF Antennas
BBA - 1KD HF ANTENNA
HF BROADBAND MULTIWIRE ANTENNA
Product Brief
Our flagship model and all-round best
performer to date is the BBA series of
antennas.
These antennas are highly efficient, and
engineered to meet the exacting standards
of professional users. Frequency range is
specified according to useful gain (not only
VSWR), and all components are validated
for rated power.
The Bushcomm BBA has the flexibility to
suit a wide range of installation situations -
between two purpose built towers at a
professional site, in an inverted “V”
configuration, or even between a tree and
the back shed.
Light yet sturdy construction ensures low
total mass wind loading. The highest quality
materials are used in construction, such as
stainless steel wire and fittings, and UV
resistant fibreglass rods, to produce an
antenna that will survive the rigours of the
outdoors for many years.
There are many variants in the BBA family
with sizes and power ratings to suit a wide
range of applications.
FULL BBA FAMILY:
BBA100V - 130w voice, 27m
BBA100C - 130w continuous, 27m
BBA100CS - 130w continuous, 20m
BBA100CE - 130w continuous, 54m
BBA600V - 600w voice, 27m
BBA600VE - 600w voice, 54m
BBA-1kD -1kW continuous, 27m.
BBA-1kDE - 1kW continuous, 54m
BBA1kCF - 1kW continuous, 74m
SPECIAL FEATURES
3.6-30 MHz
No tuner required
S/S wire and fittings
UV resistant rod & balun/load boxes
Easy installation (instruction provided)
Variation of length and power available
Configurable in horizontal or inverted V
Suitable for continuous data
DB00567/6 ©Bushcomm 2014

Bushcomm
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
-25.0
-20.0
-15.0
-10.0
-5.0
0.0
5.0
10.0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
HF Antennas
Specification Summary
SPECIFICATION
ELECTRICAL
Frequency Range 3.6 - 30MHz
Nominal Input Impedance 50 Ohm
VSWR (typical) Better than 2:1
Gain 5dBi (typical) -4dBi at 3.6MHz
(height dependent)
Power Rating: 1Kw Continuous (1.5Kw PEP)
Input connector: UHF Type socket (S0239)
MECHANICAL
Operating Temperature -30°C to +50°C
Storage Temperature -40°C to +85°C
Ice Loading 0.6cm , with reduced wind loading
Product Brief
Shipping Weight: Approx 5kg
Antenna Length 27 metre
Radiating elements 2mm Stainless Steel (G304)
Wind Rating 210 km/hr*
Mast Spacing 29m horizontal tower spacing**,
20m footprint Inverted V
* In accordance with AS1170.2 – 1989 SAA Loading Code – Wind Loads
** Approximate spacing. Will vary location to location and depending on preference
*** Coaxial cable not included, can be purchased separately
Above: Bushcomm Balun showing
pigtail strain relief feature***
HEAD OFFICE
21 River Road BAYSWATER WA 6053 AUSTRALIA
EMAIL: sales@bushcommantennas.com.au
WEBSITE: www.bushcomm.com
PHONE: +61 8 6144 3204
DB00567/6 ©Bushcomm 2014