Bush WQP-3202 FS11, WQP6-3202 FS11 Installation & User's Instructions

BUSH –
Dishwasher
Installation & User InstructionsPlease keep for future reference 478
/
These instructions contain important information which will help you get the best from your appliance and ensure safe and correct installation, use and maintenance.
If you need help or have damaged or missing parts, call the
Customer Helpline: 0845 600 4632
ImportantPlease read these instructions fully before installing or using
Issue 1 – 07/09/10
Contents
Safety Information 2 Parts 3 Installation 4-6
Water supply connection 4 Connection of drain hoses 4 Position the appliance 4 Water pressure 5 Electrical connection 6
User Instructions 7-14
Before first use 7-9 Rinsing aid 8 Detergent 9 Loading your appliance 10-12 Wash cycle table 13 Using your appliance 14
Care and Maintenance 15
General 15
Trouble Shooting 16
Error codes 16
Technical Specifications 17
Disposal information 17
Guarantee 18
Product codes
WQP6-3202 FS11
1
Safet
y
Information
Important – Please read these instructions full
y
before installation
Before use During use
The installation of this appliance is best carried out by 2 people.
y Dispose of all packaging carefully and
responsibly.
y The appliance is designed for indoor use only
and must be protected from rain, moisture and extreme temperature variations.
y This appliance is designed for household use.
Do not use the appliance for industrial and commercial use, or any other purpose.
y The appliance MUST be positioned on a firm
level base.
y Do not place the appliance near a heat source or
in direct sunlight.
y Only suitable household utensils should be
placed in the dishwasher. Avoid utensils that are non-heat-resistant, metal decorated, etc.
y Do not use detergent not designed for
dishwasher. This may damage the appliance.
y Do not spray water on the appliance. It may
cause electrical parts failure or electric shock.
y Do not stand or sit on the door when it is open. It
may cause deformation or failure of your dishwasher. The appliance could tip forward.
y Do not put any heavy objects on top of the
appliance. It will damage the appliance.
y This appliance is fitted with a safety function that
automatically stops the operation of the dishwasher when it is exposed to heavy disturbance on its mains.
y The appliance is to be connected to the water
supply using new hose set and that old hose set should not be used.
y The door should not be left in open position since
this could present a tripping hazard.
y This appliance must be positioned so that the
plug is accessible.
y This appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
y This appliance is not intended for use by young
children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the appliance.
y Do not touch the visual heating element during or
immediately after use.
y
Do not operate your dishwasher unless all enclosure panels are properly in place. Open the door carefully if the dishwasher is operating, there is a risk of water squirting out.
y WARNING: Knives and other utensils with sharp
points must be loaded in basket with their points down or placed in a horizontal position. Avoid damage to the door seal.
y Load plastic items so that they do not come into
contact with the visible heating element.
y Dishwasher detergents are strongly alkaline, they
can be extremely dangerous if swallowed. Avoid contact with skin and eyes and keep children away from the dishwasher when the door is open.
y The door should not be left open, since this could
increase the risk of tripping.
y Keep detergents away from children. y Do not attempt to repair the appliance yourself.
Contact the Customer Helpline: 0845 600 4632.
2
Part
Please familiarize yourself with the parts and accessories listed below
1. Salt Container
2. Detergent Dispenser
3. Cutlery Basket
4. Filter assembly
5. Rinse Aid Dispenser
1. Power Button
2. Power Light
3. Washing Program Selector
4.
Start/Reset Button
5. Start/Reset Light
6. Salt Warning Light
7. Rinse-Aid Warning Light
6. Spray Arms
7. Cup Shelf
8. Basket
9. Drain pipe connector
10. Inlet pipe connector
If you have damaged or missing parts, call the Customer Helpline: 0845 600 4632
Accessories included
3
Installation
Water Connection
Caution: 2 people are required to unpack
and handle the appliance, it is recommended that gloves are worn.
y Carefully remove all packaging materials
including the foam base, dispose of correctly.
y Connect the cold water supply hose to a
threaded ¾” connector and make sure that it is fastened tightly in place.
y If the water pipes are new or have not been
used for an extended period of time, let the water run to make sure that the water is clear. This will prevent the water inlet to be blocked and damage the appliance.
y It can also connect the machine to a hot water
supply where it does not exceed 60°C.
Connection of drain hose
Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it
run into the sink, making sure to avoid bending or crimping it. Use the special
plastic support that comes with the appliance.
Attention: The special plastic hose support must be solidly
fastened to the wall to prevent the drain hose from moving and allowing water to spill outside
the drain.
Position the appliance
1. The dishwasher must be installed on a solid level surface.
2. Position the appliance in the desired location. The back should rest against the wall behind it, and the sides along the adjacent cabinets or wall. The water supply and drain hoses can be positioned either to the left or right side to facilitate proper installation.
To level the dishwasher, adjust the 4 level
screws (feet) under the dishwasher.
4
Installation
Water pressure
For best operating results, incoming water pressure should be between 0.04 and 1 Mpa.
Your dishwasher cleans by spraying a mixture of hot clean water and detergent (under pressure) against the soiled surface of dishes. The water is pumped through a rotating spray arm, drained through a filter removing food and soiled particles and pumped back through the spray arm.
To prevent dishwasher damage, the temperature of the incoming water supply should not exceed 60°C.
Note: Hard water conditions will adversely affect the performance of your dishwasher. To minimise this condition, it is recommended to periodically operate/rinse the dishwasher in empty condition using 1 cup of white vinegar (at least once a week).
Important: Once you open the water supply (even if it is closed immediately thereafter), the water inlet hose will be pressurised.
5
Loading...
+ 13 hidden pages