BUSH WMNSINT612W, WMNSINT714W User guide

Instruction manual

WMNSINT612W
WMNSINT714W

You’ll soon be enjoying your new washing machine.

It all begins here, with your instructions. Don’t worry,
there’s nothing too technical coming up. Just simple,
step-by-step guidance to get you up and running
quickly. Sound good? Then let’s get started.

Help and Guidance

We’re here to help you get the most from your . Should you require washing machine
any guidance, a simple solution can often be found online at:

www bush-support.com.

If you still require further assistance, call one of our experts on 0345 257 7271.

Contents

Safety information

1

Safety information 6

Getting to know your

2

washing machine

Ready? Let’s begin 10

Accessories 12

Installing your washing

3

machine

Installation requirements 14

Unpacking 14

Connections (electrical, water, gas) 15

Product support

7

Troubleshooting 38

Help and assistance 39

Declaration of conformance to product
standards 40

Disposal 41

Functions

4

Functions 18

Using your washing machine

5

First use of washing machine

Standard and advanced functions/use

6

Care and Maintenance

Cleaning

Maintenance

Technical specifications 35

28

29

33 actions

33

or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.

3

1Safety information

Safety information

Safety information

Important - Please read these instructions fully before
installing or operating

If the supply cord is damaged,it

•

must be replaced by the

manufacturer,its service agent or
similarly qualified persons in order
to avoid a hazard.
The new hose-sets supplied with

•

the appliance are to be used and
that old hose-sets should not be
reused.

•

This washing machine is for indoor
use only.
The openings must not be

•

obstructed by a carpet.
This appliance can be used by

•

children aged from 8 years and
above and persons with reduced

physical,sensory or mental
capabilities or lack of experience
and knowledge if they have been

given supervision or instruction

concerning use of the appliance

in a safeway and understand the

hazards involved.

Cleaning and maintenance shall

not be made by children without

supervision.

This appliance is not intended for

•

use by persons (including children)

with reduced physical, sensory or

mental capabilities, or lack of

experience and knowledge, unless

they have been given supervision

or instruction concerning use of

the appliance by a person
responsible for their safety.

•

Pull out its plug from the power
socket before cleaning or
maintenance.

•

Make sure that all pockets are emptied.

Sharp and rigid items such as coin,

•

brooch,nail,screw or stone etc.may
cause serious damages to this machine.

•

Pull out its plug and cut off water
supply after the operation.

•

Please check whether the water inside
the drum has been drained before
opening its door.Please do not open
the door if there is any water visible.

•

Pets and children may climb into the
machine. Check the machine before
every operation.
Glass door may be very hot during

•

the operation.Keep children and pets
far away from the machine during
the operation.

•

Take care that power voltage and
frequency shall be identical to those
of washing machine.
Do not use any socket with rated

•

current less than that of washing
machine.Never pull out power plug
with wet hand.
To ensure your safety,power cord

•

plug must be inserted into an earthed
three-pole socket.Check carefully
and make sure that your socket is
properly and reliably earthed.

6

or online at www.bush-support.com. If you still require further assistance, call one of our experts on 0345 257 7271.

Safety information

Safety information

Important - Please read these instructions fully before
installing or operating

Children of less than 3 years should

•

be kept away unless continously
supervised.
Do not let kids play with the

•

machine.
Packing materials may be

•

dangerous to the children . Please
keep all packing materials (plastic
bags,foams etc) far away from the
children.
Washing machine shall not be

•

installed in bath room or very wet
rooms as well as in the rooms with
explosive or caustic gases.

•

Make sure that the water and
electrical devices must be
connected by a qualified technician
in accordance with the
manufacturer's instructions and
local safety regulations.
Before operating this machine,all

•

packages and transport bolts must
be removed.Otherwise,the washing
machine may be seriously
damaged while washing the
clothes.

•

Before washing the clothes at first
time, the washing machine shall be
operated in one round of the
whole procedures without the
clothes inside.
The washing machine with single

•

inlet valve only can be connected
to the cold water supply. The
washing machine with double inlet
valves can be connected to the hot
water and cold water supply.

Your washing machine is only

•

for home use and is only
designed for the textiles suitable
for machine washing.
Flammable and explosive or toxic

•

solvents are forbidden.Gasoline and
alcohol etc.Shall not be used as
detergents.Please only select the
detergents suitable for machine
washing, especially for drum.
It is forbidden to wash carpets.
Be careful of burning when washing

•

machine drains hot washing water.
Never refill the water by hand during
washing.
After the program is completed,

•

Please wait for two minutes to open
the door.

•

Please remember to disconnect
water and power supply immediately
after the clothes are washed.

•

Do not climb up and sit on top cover
of the machine.
Do not lean against machine door.

•

Please do not close the door with
excessive forces.If it is found difficult
to close the door,please check if the
excessive clothes are put in or
distributed well.
The household washing machine

•

isn't intended to be built-in.
Cautions during Handling Machine

•

1.Transport bolts shall be reinstalled
to the machine by a specialized
person.

2.The accumulated water shall be
drained out of the machine.

3. Handle the machine carefully.
Never hold each protruded part on

•

the machine while lifting. Machine
door can not be used as the handle
during the conveyance.

7

Getting to know your

2

washing machine

Getting to know your washing machine

You’ll be up and running in no time

Ready? Let’s begin...

Please read these instructions carefully. They contain
important information which will help you get the best
from your and ensure safe and washing machine

correct installation and operation.
If you require any further assistance, our technical
experts are happy to help. For full details, refer to
the product support section at the end of these
instructions.

10

Getting to know your washing machine

Component

or online at www.bush-support.com. If you still require further assistance, call one of our experts on 0345 257 7271.

Getting to know your washing machine

You’ll be up and running in no time

5 6

1

2

3

1.Detergent Drawer

2.Door

4

5

6

4.Control Panel

5.Power lead

7

7 7

7.Transport bolt x 4

8.Water inlet

8

7

3.Filter

6.Drain hose

Getting to know your washing machine

11

WMNSINT612W /WMNSINT714W

Capacity

6kg / 7 kg

1200 /1400 rpm

A++

3

Installing your washing machine

Installing your washing machine

Bringing it all together

Installation requirements

In addition to the instructions mentioned here,

•

special regulations of the relevant water and
companies may apply. If in doubt, have the
washing machine connected by a qualified
technician.

The washing machine is heavy - caution when

•

lifting it.
Do not lift by projecting components (e.g.

•

washing machine door).

•

Warning: Frozen hoses may tear/burst. Do not
install washing machine in outdoor areas or
where there is a risk of frost.Please operate
washing machine above 0℃.

Lay hoses and cables in such a way that there is

•

of tripping over them.no risk

An additional space (approximately 120mm) is
required at the rear of the washing machine.
This is to allow
hose and drain hose connections.

enough space for the water

Unpacking

Unpacking your washing machine

Fig1 Fig2

Caution:2 people are required to unpack the
washing machine,it is recommended that gloves
are worn.

Carefully remove all packing materials including
the foam base, dispose of correctly.

Note:When opened,water droplets may be visible
in the drum etc. this is normal as each appliance
is tested before delivery.

Removing the transport bolts

Important:The bolts are designed to
support the internal components during transit
these MUST be removed before use.

1:Loosen the screws by rotating counterclockwise
with a suiltable wrench,(Fig 1 2)

2:Remove the bolts by pulling them.( 3)
3:When the transport bolts have been removed,

insert the plastic transport screw taps found in
the accessories bag into the holes.(Fig 4)

transport

Fig

Fig3 Fig4

Levelling feet

1:For your machine to work efficiently with

minimum vibration it should be settled on flat,
nonslippery,firm ground.

2:You can adjust the balance of your machine by
changing the positioning of its feet.

3:First,loosen the plastic adjustment nut.(Fig 5)

4:Adjust by rotating the feet upwards or

downwards.(Fig 6)

5:After the desired position has been reached,
tighten the plastic adjustment nut again by rotating
it upwards.

Note:Never put cartons,wooden blocks or similar
materials under the machine to balance
irregularities in the level of the ground.

14

Installing your washing machine

Fig5 Fig6

or online at www.bush-support.com. If you still require further assistance, call one of our experts on 0345 257 7271.

Preparation the Fixed position paper(Fig 10)

Installing your washing machine

Bringing it all together

1. Make the mark on the door according to the carbinet and washing machine height.

Position Paper

Fig10

2.Fixed position paper on the door.(Fig 11)

Top Top

Positio n Paper
left open

Left O pen

Shear f ixed position pap er

Righ t Open

Pas te on t he Do or( The d oor o pen
fro m rig ht to l eft )

Positio n Paper
right open

Pas te on t he Do or( The d oor o pen
fro m to )left r igh t

Fig11

16

Installing your washing machine

3.

or online at www.bush-support.com. If you still require further assistance, call one of our experts on 0345 257 7271.

Installing your washing machine

Bringing it all together

Product support

Drill hole on the door(Fig 12)

Drill the hole on the door fixed position paper.

according to the

2mm

12mm

Fig12

35mm

16-22mm

12mm

4.Installation the hinges and spacer(Fig 13)
Fix the hinges to the machine by means of the ST4*12 screws included.

Fig13

Door to open from ri ght t o lef t

5.Installation the counter magnet(Fig 14 & Fig 15)
The appliance is prearranged for a magnetic closure of the door. To enable a correct
operation of this device, it is necessary to screw the counter-magnet into the inner side
of the door with M5*12 screws.

Door to open from le ft to r igh t

Door to open from ri ght to left

Fig14

Installing your washing machine

17

6.Installation the door(Fig 16 & Fig 17)

Installing your washing machine

Bringing it all together

Product support

Fix the cabinet with M5*12 screws.

Door to open from left to right

Fig15

Fig17

If you have any doubt on the installation, please consult the qualified person.

18

Installing your washing machine

Fig16

Connections

or online at www.bush-support.com. If you still require further assistance, call one of our experts on 0345 257 7271.

Installing your washing machine

Bringing it all together

Water inlet hose connections
Important:This washing machine MUST only be

connected to a cold water supply.
1:Connect the water inlet hose,the angled
connection attaches to the water inlet on the
back of the washing machine.(Fig 18)

Fig18

2:The straight connection attaches to the water
supply valve.(Fig 19)

Fig19

3:Ensure all seals are in place before connecting.

Important:Only tighten the hose connection nut
by hand - do not overtighten.

Drain hose connections

Important:The height of the top of the curve in
the drain hose MUST be between 60 - 100cm
from the floor.(Fig 20)

Max.100cm

Min.60cm

Electrical

Any electrical work that is required to
install this appliance MUST be carried
out by a qualified electrician.

Warning:THIS APPLIANCE MUST BE
EARTHED

Before making any electrical connections,
ensure that:

Electrical safety is only guaranteed when the

•

earth system of your house is in accordance
with the related local regulations.

Do not bend, stretch or pull the supply cable

•

to avoid electric shock.
Ensure the power socket is suiable for the

•

maximum power of the machine (fuses in the
power circuit must be 13 amp).

The supply voltage should be the same as that

•

indicated in the technical specifications and
the applicance rating plate.

The appliance should be earthed and in

•

complicance with the applicable law.
When installed,the power socket must be

•

within easy reach.

•

If the socket outlets in your home are not
suitable for the plug supplied with this unit
check with a qualified electrician for
replacement.

To avoid the risk of overloading your plug

•

socket, the use of adapters, multiple connectors
or extension cables are not recommended.

The applicance must be connected to a

•

220-240 volt 50Hz AC supply by means of
a three pin socket, suitably earthed and
protected by a 13 amp fuse.

Should the fuse need to be replaced , a 13

•

amp fuse approved to BS 1362/A must be
used.

The plug contains a removable fuse cover

•

that must be refitted when the fuse is replaced.
if the fuse cover is lost or damaged, the plug
must not be used until a replacement cover
has been fitted or the plug is replaced.

A damaged plug should be cut off as close to

•

the plug body as possible , the fuse should be
removed and the plug disposed of safely.

Fig20

Drain hose can be fitted to the drainer or
a wash basin.

Installing your washing machine

19

Plug replacement (UK lreland only)&

Installing your washing machine

Bringing it all together

Should you need to replace the plug;the wires
in the power cable are coloured in the following
way:

Blue - Neutral ’ N’

Brown - Live ’ L’

Green Yellow - Earth ’E’ &

As the colour of the wires in the power cable
may not correspond with the coloured markings
identifying the terminals in your plug,and
proceed as follows(Fig21):

The green yellow wire must be connected to
the terminal in the plug that is marked with the
letter E or by the earth symbol.

The blue wire must be connected to the terminal
that is marked with the letter N.

The brown wire must be connected to the terminal
that is marked with the letter L.

If power supply cord is damaged , it must replaced
by the manufacturer or its service agent or a
similar qualified person in order to avoid a hazard.

&

Fig21

20

Installing your washing machine

Simple everyday use

Introduction of control panel

Program selection knob

For you to select different washing

program.

22

Functions

Delay: delay start from 1-24 hours
Temp.:select temp. of a program
Speed: select spin speed

Simple everyday use

Introduction of control panel

or online at www.bush-support.com. If you still require further assistance, call one of our experts on 0345 257 7271.

Turning the machine on

Plug in your machine. Place the laundry in the
machine and add detergent and softener. Press
the "on/off" button.

Program selection

First, turn the program knob to select
suitable program according to the types
of textiles.
Second, select a proper temperature
by following the care instructions on
the clothes.
Last, select the proper spin speed.
Generally, the higher temperature
will consume more energy; the higher
spin speed will cause more noise.

PLEASE NOTE: to protect the clothes, the delicate
lower spin speed shall be selected.

The main washing procedures depend on the types
of the clothes to be washed as follows:

Main program

Depending on the type of textile, the following main
programs are avaiblable: Each of these main
programs comprise of a complete washing process,
including washing, rinsing and, if required, spin
cycles.

Cotton

•

Suitable for textiles made of cotton or
linen, for example coats, bed sheets,
towels, etc.

Cotton Intensive

•

To increase the washing effects, main additional
washing time is increased.It is recommended
to wash the clothes for babies or worn by the
persons with allergic skin.

Eco

•

As for few light dirty clothes, the maximum
temperature of washing is limited to 40℃ , and
saving more energy.

My Cycle

•

You can notice that there is a same small icon
beside “Speed ” button.
First, choose the favorite program you want;
second, select suitable functions (delay function is
not available); then press “Speed ” button for
3seconds to set “My Cycle”. Your selection will be

memorized in“My Cycle” program. If you want to
change it to another program, just repeat above
procedure. Default “My Cycle” program is “Cotton”.

Synthetic

•

You can select this procedure to wash
the quite delicate clothes. The
procedure is shorter compared with
that for cottons and the washing
movement is quite gentle.It is
recommended to wash synthetic articles,
for example: shirts, coats, blending. As for
curtains and laced textiles, the procedure
“Synthetic ” shall be selected. While
washing the knitting textiles, detergent
quantity shall be reduced due to its loose
string construction and easily forming
bubbles.

Delicate

•

You can select this procedure to wash your
delicate clothes. Its washing movement is
gentler and spin speed is less compared
with the procedure “Synthetic”. It is
recommended for the articles to be
washed softly.

Wool

•

You can select this procedure to wash the
wool textiles labeled with “Machine Wash”.
Please select the proper washing
temperature according to the label on the
articles to be washed. Furthermore, the
proper detergent shall be selected for wool
textiles.

Spin Only

•

Separate spin only procedure. Soap water
or rinse water shall be drained out before
spinning.

Quick

•

This procedure is suitable for washing few
and not very dirty clothes quickly.

Rinse&Spin

•

Separate Rinse&Spin Procedure.

Drain Only

•

Separate Drain only Procedure.

Mix

•

This program is suitable for daily wash.
Cotton / Synthetic / Jeans / Kids textiles
can all be mixed and washed together with
like colours. Do not use this programme for
wool and delicate clothes such as silks.

Functions

23

Simple everyday use

Introduction of control panel

Sports Wear

•

You can select this procedure to wash the
activewear.

Baby Care

•

Baby care procedure with an extra rinse, it can
make the baby's wear cleaner and make the
rinse performance better to protect the baby
skin.

Auxiliary function

These functions can be used based on
main program, you can press these
functions after you chose the main
program.
Note: you can't use these functions after
the main program started.

Delay

•

Delay function can be set with this button, the
delaying time is 0-24 H.
Set the Delay function:

1. Select a programme;

2.Press the Delay button to choose the time;

3.Press Start/Pause to commence the delay
operation.
Cancel the Delay function: Continue to press
the delay button until it displays 0H.It should
be set before starting the program. If the
program already started, should press the

On/Off button.

Notes: If there is any break in the power supply
while the machine is operating, a special
memory stores the selected programme and
when the power is restarted, press the
Start/Pause button the left time is continues.

Child Lock

•

This is to avoid the operation being interrupted
by a child.
Lock : press both ‘Temp.’ and ‘Speed’ button for
3 seconds, the child safety lock indicator will be
illuminated denoting entering the child-lock state.
Unlock : press both ‘Temp.’ and ‘Speed’ button
for 3 seconds, the child safety lock indicator will go
off denoting that the lock is released.

Suppression of the acoustic signals

•

This is an additional buzzer function on your
appliance. After deactivating the buzzer function,
the buzzer will be closed. After starting the machine,
press the “Temp.” button for 3 seconds and
you will hear a beep, then the buzzer will be closed.
To restart the buzzer function, press the
“Temp.”button again for 3 seconds. The setting
will be kept until the next reset.
Warning: After deactivating the buzzer function, the
sounds will not be activated any more.

(Temp.&Speed )

Speed

•

Desire spin speed.

Temp

•

Choose suitabl temperature for the fabric.e

•

Prewash
The indicator of prewash will light up on the
display.
The Prewash function can get an extra wash
before main wash.

Extra Rinse

•

The laundry will undergo extra rinse once after
you select it.

24

Functions

Simple everyday use

Program Selection Guide - WMNSINT612W

or online at www.bush-support.com. If you still require further assistance, call one of our experts on 0345 257 7271.

Load(kg)

6.0

7.0

Cotton Intensive

Cotton

Cotton

Cotton 20℃

Express15'

Eco

Rinse&Spin

Spin Only

Drain Only

Wool

Delicate

Mixed

Synthetic

Sport

6.0

6.0

6.0

2.0

2.0

2.0

7.0

6.0

2.0

2.5

6.0

3.0

3.0

7.0

7.0

7.0

2.0

2.0

2.0

7.0

7.0

2.0

2.5

7.0

3.5

3.5

6kg washing machine( )

7kg washing machine( )

Delay

Softener
Case

Extra rinse

WMNSINT714W

Default

Temp.( C)

Prewash

WMNSINT612W
WMNSINT714W

40

60

40

20

Cold

Cold

×

40

30

40

40

40

Default Time

(Min)

WMNSINT612W
WMNSINT714W

160

107

92

73

15

60

31

14

1

66

60

73

100

79

WMNSINT612W WMNSINT714W

800

1000

1000

1000

800

800

1000

1000

400

600

1000

800

800

800

1200

1200

1200

800

800

1000

1000

400

600

1000

800

800

Baby care

3.0

3.5

60

99

1000

1000

- Half load for 6.0Kg machine:3.0Kg.

- Half load for 7.0Kg machine:3.5Kg.

1) Test wash cycle in compliance with directive : Set Cotton

2010/30/EU

; Speed: the

highest speed;

- This cycle is designed for cotton loads with a normal soil level and is the most efficient in

o

terms of both electricity and water consumption; it should be used for garments which can be
washed at 60C. The actual washing temperature may be differ from the indicated value.

2) Test wash cycle in compliance with directive 2010/30/EU : Set Cotton

highest speed;

o

; Speed: the

- This cycle is designed for cotton loads with a normal soil level and is the most efficient in
terms of both electricity and water consumption; it should be used for garments which can be
washed at 40C. The actual washing temperature may be differ from the indicated value.

●　Means must ○　Means optional Means not necessary

Note : Water and power consumption and programme duration may differ from the table shown,
subject to changes in water pressure, water hardness and temperature, ambient temperature, type
and amount of laundry, selection of auxiliary functions, and fluctuations in the supply voltage.

Functions

25

Using your washing machine

5

Using your washing machine

Getting the most from your appliance

Organising Laundry

the washing label on each garment

Read

•

to help you sort your washing into
different loads.
Sort the laundry by colour, type of fabric

•

and by how soiled it is. This will help you
choose the correct programme and
temperature for each wash.

Normal wash

40

Warm wash

Gentle wash

Iron

Do not iron

Iron with cloth

Steam Iron

•

(max 40℃ )

Cool iron(max 110 ℃ )

Warm iron.medium
(max 150℃)

Dry after wash

Line Dry in shade

Do not exceed the maximum load! See

Hand wash

Do not wash

Dry clean

Do not dry clean

Warmly dry clean

Do not tumble dry

Bleach

Do not bleach

Dry clean normal cycle
with any solvent

Dry clean normal cycle
petroleum solvent only

the programme selection table for the
maximum

load for the programme you

require.

Cotton quilt covers (single/double)

Chlorine bleach
may be used

Chlorine bleach
not be used

Tumble dry normal Drip dry

A

F

C

C

Dry flat

No WringLine Dry

Tumble dry. Medium
(max 150℃ )

Tumble dry. Low heat
(max 110℃)

Hang to dry
/Line dry

No machine wash

Preparing Laundry

Treat stains before washing.

•

Some items should be put into a cleaning

•

net before going into the washing
machine. i.e. bras with metal wires, tights
and lace clothing to prevent damage.

• Check that pockets do not contain any

•

objects which may damage your clothes
and the washing machine.
Tie up any loose strings on laundry, close

•

zippers and reverse clothing with zips
inside out.

To prevent any large, heavy objects (e.g.,

•

buckles, large buttons, etc.) from hitting
the glass door, turn your clothing inside
out, or remove the heavy objects. These
could damage your laundry or the
washing machine.
Remove any surplus hair, animal fur, sand,

•

and other materials with a brush before
washing.

If clothes have raised fabric turn them

•

inside out.
Clothes that are not colour fast should be

•

washed separately.
Insert your clothes into the washing

•

machine.
Close the washing machine door. Ensure

•

that you do not trap any items of clothing
between the loading door and the rubber
seal.

Shorts

28

Using your washing machine

or online at www.bush-support.com. If you still require further assistance, call one of our experts on 0345 257 7271.

Adding Detergent and Softener

Using your washing machine

Getting the most from your appliance

Add detergent into the appropriate dispenser.

•

Apply softener before you start washing.

•

Apply detergent and softener according to

•

the washing amount, the soiling level, the
water hardness in your area and the
manufacturer’s instructions of these products.

Dilute viscous fabric softener and fabric conditioner
with water. Prevent blockage of the overflow.
Maximum level is 40ml.

Main wash

Detergent

detergent

Softener

Softener

Pre-wash

Detergent

detergent

Do not use the washing machine when the

•

detergent drawer is removed. It may cause a
water leak or it may not work normally.

If you forget to add detergent, you can drain

•

the washing machine by running a drain only
programme. Then you can add detergent and
start the programme again.
Detergent only reaches the drum when water

•

flushes through the detergent drawer.
To prevent powder detergent staying in the

•

drawer, dry the inside of the drawer with a
cloth.Make sure the powder isn’t lumpy when
you add it into the drawer.

If the rinse cycle isn’t removing all the

•

detergent from your wash, use less detergent .

•

Softener should not exceed the MAX level in
the compartment.

Wash out unused softener with a splash of
water or a damp cloth after the programme
has finished.

II

I

Before First Use

Prior to the first use of the appliance,

•

it is recommended to run a wash
programme without clothes. A small
amount of washing detergent should
be used.

Wash Setting

Standard Washing

1. Pull the door handle and put the laundry in
the drum. (Refer to Preparation to sort your
laundry before it goes into the drum.) Make
sure no washing gets caught in the door.

2. Close the door and press the On/Off button.

Turn the Programme selection dial to select

3.

your wash programme.

4. Select the temperature if desired.

5. Add detergent into the detergent drawer.

The quantity of detergent will depend on the
amount of laundry, the degree of soiling and
the water hardness. Use the amount of
detergent suggested on the packaging.

6. Press the Start/Pause button to start the washing.

7. The washing machine will sound when the

programme is complete.

If the door is locked and you switched the
washing machine off and then on - or if
there’s a power cut - it will stay locked for
1 minute.

Using your washing machine

29

Using your washing machine

Getting the most from your appliance

Removing Washing (Once programme is
fnished)

Door remains locked for 1 minute after
wash stopped.

Open the washing machine door and remove

•

your washing.

•

Remove any foreign objects to avoid risk of
rusting.
Leave the door and detergent drawer open so

•

that residual water can evaporate.

1.Changing the selection after the program
started?

If you need to change a setting after the wash has
started, press on/off, then on/off again, Re-select
the program, spin speed and optional functions,
and then press the Start / Pause button. (Ensure
the Child Lock is off, otherwise the original
program will continue.)

2.Door lock

The icon lock will light up automatically once
the program start. The door lock icon will fade
out 1 minute after the program end and the door
will be allowed to open automatically.

3.End of program

It will sound for 5 seconds after
program and the display will indicate “end” icon.

the end of

30

Using your washing machine

Using your washing machine

Getting the most from your appliance

or online at www.bush-support.com. If you still require further assistance, call one of our experts on 0345 257 7271.

Quick start

1. Open the door and
Load the laundry

7. Press the 【start/pause】

6. Select the desired programme

2. Measure out the detergent

3. Close the door

After washing :

1.The washing machine will sound several times for 5 seconds.

2. close the water tap ;It is recommend to and pull out the power plug.

5. Press the On/Off

4. Plug the power supply

Using your washing machine

31

Care and maintenance

6

Care and maintenance

Looking after your appliance

Before your maintenance starts, please do

or online at www.bush-support.com. If you still require further assistance, call one of our experts on 0345 257 7271.

pull out the power plug or disconnect power
and close the tap.

- Do not use solvents clean to avoid that the
washing machine, it will damage, and toxic
gases are generated or exploded.

- Do not use the detergents containing PCMX
to clean the washing machine.

Cleaning and Maintenance of Washing
Machine Cabinet

- Proper maintenance on the washing machine
can extend its working life. The surface can
be cleaned with diluted nonabrasive neutral
detergents when necessary. If there is any
water overflow, use the wet cloth to wipe it
off immediately.

- No sharp items are allowed to strike the
cabinet.
Notes: Do not use formic acid and its diluted
solvents or equivalent .

Clean Internal Drum

- The rusts left inside the drum by the metal
articles shall be removed immediately with
chlorine-free detergents.

- Never use steel wool.

Defrost a Frozen Washing Machine

When the temperature drops below zero and
your washing machine gets frozen, you may:

1.Disconnect the power supply for the washing
machine.

2.Wash the tap with warm water to loosen inlet
pipe.

3.Take down inlet pipe and immerse it in warm
water.

4.Pour warm water into washing drum and wait
for 10 minutes.

5.Reconnect inlet pipe to the tap and check
whether inlet and outlet are working normally.
Notes: when the washing machine is reused,
make sure the ambient temperature is above 0 C

Anti-freeze

If your washing machine is located in the room
where it can get frozen easily, please drain the
remaining water inside drain pipe and inlet pipe
thoroughly.

o

Remove the remaining water
in inlet pipe:

1.Close the tap.

2.Screw off the inlet pipe from
tap and put its end into the
container.

3.Start up any procedure
except single Wash or Drain
procedure. Water will be
drained out of inlet pipe if any
for about 40 seconds.

4.Reconnect the inlet pipe to tap.
Remove the remaining water in
drain pump(Fig22).

Clean detergent drawer and
grooves

1.Press down the arrow
location on softener cover
inside the drawer.

2.Lift the clip up and take out
softener cover and wash all
grooves with water.

3.Restore the softener cover
and push the drawer into
position.

Clean inlet filter

Inlet filter shall must be
cleaned if there is not any or
insufficient water in when
the tap is opened.
Clean the tap filter:

1.Close the tap.

2.Select any procedure except
“Wash” or “Drain” procedure.

3.Press the button “Start/Pause”
and keep the procedure
running for about 40 seconds.

4.Remove the inlet pipe from
the tap.

5.Use water to wash the filter.

6.Reconnect the inlet pipe.
Washing the filter in washing
machine:

1.Screw off the inlet pipe from
the backside of the machine.

2.Pull out the filter with long
nose pliers and reinstall it back
after being washed.

3.Reconnect the inlet pipe.

4.Open the tap and make sure
there is no water leakage.

5.Close the tap.

Fig 22

Fig 23

Fig 24

Fig 25

Fig 26

33

Care and maintenance

Care and maintenance

Looking after your appliance

Notes: Generally, the tap filter is washed first
and then the filter in washing machine will be
washed.

If only the filter in washing machine is washed,
then the steps 1~3 in cleaning the tap filter
shall be repeated .

(Fig27,28)

Fig 27 Fig 28

Pull out the power plug to avoid electrical shock
before washing.
After using the washing machine, remove all
the clothes and close the door tightly.

Remove foreign matters

Drain Pump Filter:
Drain pump filter can filter the yarns and small
foreign matters from the washings.
Clean the filter periodically to ensure the normal
operation of washing machine.

According to the soil level within the cycles and
the frequency of the cycles, you have to inspect
and clean the filter regularly.
The pump should be inspected if the machine
does not empty and/or spin;The machine makes
an unusual noise during draining due to objects
such as safety pins, coins etc. blocking the pump.

Clean the pump filter :

1.Turn the filter
down as shown with
the figure and take
out sundries matters

.(Fig29)

Warning!

When the appliance is in use and depending
on the programme selected there can be hot
water in the pump. Never remove the filter
during a wash cycle, always wait until the
appliance has finished the cycle, and is empty.
When replacing the filter, ensure it Is securely
retight end so.

Fig 29

Care and maintenance

34

Care and maintenance

Looking after your appliance

Technical specifcation

or online at www.bush-support.com. If you still require further assistance, call one of our experts on 0345 257 7271.

Brand

Type/Description

Capacity

Spin Speed

Energy efficiency class

Annual energy consumption

BUSH

WMNSINT612W

6kg

1200 rpm

++

A

173 kWh/annum

Power consumption of off-mode

Annual water consumption

Spin-drying efficiency class

Standard washing cycle

Energy consumption of the standard 60°

Energy consumption of the standard 60°C at partial load 0.66 kwh/cycle

Energy consumption of the standard 40°C at partial load 0.69 kwh/cycle

Programme duration of standard 60°C at full load

Programme duration of standard 60°C at partial load

Programme duration of standard 40°C at partial load

C

at full load

0.5W

9240 L/annum

B

Cotton

Cotton

0.88 kwh/cycle

277 min

246 min

245 min

Water consumption of the standard 60°C at full load

Water consumption of standard 60°C at partial load

Water consumption of the standard 40°C at partial load

Remaining moisture content of the standard 60°C at

full load

Remaining moisture content of the standard 60°C at

partial load

48L/cycle

37L/cycle

37L/cycle

50%

55%

Remaining moisture content of the standard 40°C at

partial load

Noise level of washing

Noise level of spinning

Mounting

Height

Width

Depth

Power consumption

Rate voltage/frequency 220-240V~/50Hz

55%

57dB (A)

74dB (A)

Built-in

825 mm

595 mm

540

2000W

mm

Water pressure 0.05-1 MPa

35

Care and maintenance

Care and maintenance

Looking after your appliance

Technical specifcation

Brand

Type/Description

Capacity

Spin Speed

Energy efficiency class

Annual energy consumption

BUSH

WMNSINT714W

7kg

1400 rpm

+++

A

174 kWh/annum

Power consumption of off-mode

Annual water consumption

Spin-drying efficiency class

Standard washing cycle

Energy consumption of the standard 60°

Energy consumption of the standard 60°C at partial load 0.82 kwh/cycle

Energy consumption of the standard 40°C at partial load 0.62 kwh/cycle

Programme duration of standard 60°C at full load

Programme duration of standard 60°C at partial load

Programme duration of standard 40°C at partial load

C

at full load

0.5W

10000 L/annum

B

Cotton

Cotton

0.82 kwh/cycle

229 min

209 min

166 min

Water consumption of the standard 60°C at full load

Water consumption of standard 60°C at partial load

Water consumption of the standard 40°C at partial load

Remaining moisture content of the standard 60°C at

full load

Remaining moisture content of the standard 60°C at

partial load

50L/cycle

42L/cycle

42L/cycle

50%

55%

Remaining moisture content of the standard 40°C at

partial load

Noise level of washing

Noise level of spinning

Mounting

Height

Width

Depth

Power consumption

Rate voltage/frequency 220-240V~/50Hz

55%

57dB (A)

76dB (A)

Built-in

825 mm

595 mm

540

2000W

mm

Water pressure 0.05-1 MPa

Care and maintenance

36

Product support

7

Product support

Help is always at hand

Product support

Troubleshooting

1.Washing Machine does not operate ?

You can check if the door is closed tightly, power plug is inserted well and then
press start/pause button.

2.Washing Machine does not receive water ?

You can check if the water tap is opened and clean the filters of water inlet hose.

3.Washing Machine is not draining water ?

You can check the drain hose and clean pump filter.

4. Washing Machine is vibrating ?

You can check if the feet are adjusted well and make sure transportation screws
are removed.

5. The washing result is poor ?

You can select suitable program and use more detergent.

6. No water is seen in the drum during washing ?

No failure. The water is in the lower part of the drum.

7. There are residues of detergent on the clothes ?

Some detergents contain ingredients which are not soluble in water and which
may form white stains on your clothes. Please adjust your machine, carry out an
additional rinse, or eliminate the stains after drying, with a brush.

8. There are grey stains on the clothes ?

These stains may be caused by oil, cream or ointment. In the next washing
operation, use the maximum detergent amount declared by the detergent
producer.

38

Product support

Help and assistance

or online at www.bush-support.com. If you still require further assistance, call one of our experts on 0345 257 7271.

If you require any technical guidance or find that your is not operating as intended, a simple
solution can often be found in the

Troubleshooting

www.bush-support.com

< >washing machine

section of these instructions or online at

If you still require further assistance, call one of our experts on 0345 257 7271.* To help give us give you a fast
and efficient service please have the following information ready:

Model Ref.

You can find these on
the rating plate - a small
information panel (usually
a sticker or metal plate) on

Serial number

Date of purchase

the rear of your appliance

This will be shown on
your receipt

Local call rates applies*

Lines open 8am-7pm Monday to Saturday and 10am-4pm Sunday.

*Calls to Bush enquiry lines may attract a charge and set up fee from residential lines depending on your call plan/tarif. Mobile and other

providers costs may vary, see www.bt.com/pricing for details.

For Security and training purposes, telephone calls to and from customer service centres maybe recorded and monitored. Calls from
Republic of Ireland will attract international call charges.

39

Product support

Help is always at hand

Product support

This appliance complies with the following EEC directives:
2014/35/EU low voltage directive
2014/30/EU EMC directive
2009/125/EC EU Directive

Notes on disposal:

This marking indicates that this product should not
be disposed with other household wastes throug-

hout the EU.To prevent possible harm to the env-

ironment or human health from uncontrolled waste

disposal,recycle it responsibly to promote the
sustainable reuse of material resources.To return

your used device,please use the collection systems
or contact the retailer where the product was pur­ chased. They return and can take this product for
environmental safe recycling.

40

Product support

Call us now and activate your 12 month guarantee

Thank you for choosing Bush. Your new product is guaranteed against faults and
breakdowns for 12 months. Don’t forget to register it with us today so we can provide you
with our best possible after-sales service and useful updates.

www.bushregistration.co.uk

FREEPHONE*

0800 597 8548

Lines are open 8am - 8pm, 365 days a year. *Calls may be recorded and monitored.

Your Bush Guarantee

This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to
faulty materials or workmanship will be repaired free of charge (or if applicable the product will be replaced or the
purchase price refunded) where possible during this period by the dealer from who your purchased the unit.

The guarantee is subject to the following provisions:

• The g uarantee does not cover accidental damage,
misuse, cabinet parts, knobs or consumable items.

• The p roduct must be correctly installed and
operated in accordance with the instructions
contained in the manual.

• It must be used solely for domestic purposes. The
guarantee will be rendered invalid if the product is

re-sold or has been damaged by inexpert repair.

• Specifications are subject to change without notice.

• Bush d isclaim any liability for loss or damage arising
from the breakdown of the product.

• This guarantee is in addition to and does not
diminish your statutory or legal rights.

Important Data Protection Information

To find out how we and Domestic & General Insurance Plc use your data please refer to the guarantee registration

material or visit www.bushregistrations.co.uk.

Guarantor: Argos Limited - 489 - 499 Avebury Blvd. - Milton Keynes - MK9 2NW

or online at www bush-support.com . If you still require further assistance, call one of our experts on 0345 257 7271.

41

Contact:

www bush-support.com.

Helpline: 0345 257 7271