Bush STB202XI2 Instruction Manual
IMPORTANT: Please read all instructions
carefully before use and keep for future reference.
STB202XI2 Digital Box
Instruction Manual
Bush STB202XI2.indb 1 22/09/2009 11:20:05
2
A Digital Box lets you access the free
digital channels that are broadcast in
the UK. It uses a digital signal, received
through your normal aerial and lets you
watch it through your existing television.
Thank you for choosing this STB202XI2 Digital Box.
Not only can it receive over 50 digital TV channels, but you can also listen to
up to 24 digital radio stations, all at the touch of a button.
Introduction
IMPORTANT: Use of any electrical equipment should be undertaken with care. Please
read the safety section on page 20-21 before using your Digital Box. This appliance is
for household use only.
Over 50 digital TV channels.
Up to 24 digital radio stations.
No subscription, no contract, no fuss.
No installation, easy set up.
Red button interactive services.
Coverage
Check coverage in your area.
Text your postcode, followed by your house number or name to 83331*.
Or visit www.freeview.co.uk
*e.g. NW9 6NY (Costs no more than a normal text.)
The FREEVIEW service is subject to coverage. An aerial upgrade may be required. The FREEVIEW, FREEVIEW+,
FREEVIEW+ HD words and logos are trade marks of DTV Services LTD. DTV Services Ltd 2002, 2008.
IMPORTANT: The screens and illustrations shown in this instruction manual are
for reference and instruction purposes only, and may not exactly represent the final
product.
Bush STB202XI2.indb 2 22/09/2009 11:20:05
3
WIDE
INFO
TEXT
BACK
OK
EPG
1 2
3
4
5
6
7 8
9
MENU
0
EXIT
SUBT
TV/VCR
VOL
VOL
CH
CH
01 Your Digital Box ...................4
02 Your remote control ............5
03 Connecting up .....................6
04 Getting started....................7
05 Daily use ....................... 9-11
06 Advanced features ...... 13-16
07 Re-tuning ..........................17
08 Troubleshooting ................18
09 Specifications ...................19
10 Safety ......................... 20-21
Contents
What’s in the box?
Your new Digital Box Remote control
2x AAA Batteries RF lead
Other things you will need
Roof top aerial
It is recommended that you use a wideband rooftop aerial in order for your Digital Box to work
properly. For more information visit www.digitaluk.co.uk.
Scart cable
You will need a Scart cable to connect between your Digital Box and your TV. If you want to
connect a DVD recorder to your Digital Box, you will require an additional Scart cable.
Bush STB202XI2.indb 3 22/09/2009 11:20:06
4
Front view
Back view
Your Digital Box01
Power on/
Standby indicator
RF IN.
Connect the
aerial
to this socket
RF OUT.
Connect the
supplied
RF cable to
the TV.
TV Scart
Connection to TV
AUX Scart
for connection to a VCR
or a DVD Recorder
AC Mains cable
TV SCART
VCR SCART
RF OUT RF IN
Remote control
sensor
Bush STB202XI2.indb 4 22/09/2009 11:20:06
5
Your remote control 02
WIDE
INFO
TEXT
BACK
OK
EPG
1 2
3
4
5
6
7 8
9
MENU
0
EXIT
SUBT
TV/VCR
VOL
VOL
CH
CH
STANDBY Power On/Standby.
NUMBER PAD Enter values and
select the channel directly by
entering its number.
WIDE Adjust the aspect ratio
of the video output.
EPG Display the EPG
Electronic Program Guide.
INFO Display the Info bar.
NAVIGATION
Navigate up/down/left/right
in menus/on screen displays.
OK Confirm selection in menu/on
screen displays.
COLOUR BUTTONS
For interactive function
CHANNEL DOWN
TEXT Display Digital Teletext
where available.
SUBTITLE Cycle through the
available subtitles for
the current broadcast.
VOLUME UP/DOWN
EXIT Closes the on screen menus.
BACK Navigate one step
backwards in menus.
MENU Opens the menu so that
you can change the settings of
your Digital Box.
TV/VCR Changes between the
TV and VCR Scart connections.
CHANNEL UP
MUTE Turns the volume on and off.
Bush STB202XI2.indb 5 22/09/2009 11:20:06
6
Connecting up03
TV
TV
DVD/RECORDER
TV SCART
VCR SCART
RF OUT RF IN
TV SCART
VCR SCART
RF OUT RF IN
Connecting to the TV and DVD recorder with SCART
TV
TV SCART
VCR SCART
RF OUT RF IN
SCART Cable*
Aerial Lead*
RF Lead
RF Lead*
SCART Cable*
SCART Cable*
RF Lead
Getting connected
Connection to DVD Player
Connecting to the TV with SCART
* Not included in the box
Aerial Lead*
Bush STB202XI2.indb 6 22/09/2009 11:20:06
7
Getting started
Install batteries in remote
Remove the battery cover to reveal the battery compartment.
Align the two size AAA batteries so that the ‘+’ and ‘-’ marks
on the batteries match the ‘+’ and ‘-’ marks inside the battery
compartment.
Push the first battery fully into the slot and then place the second
battery in the slot. The two batteries are in line.
Replace the battery cover.
1
2
3
Plug in and switch on
Insert the Digital Box mains plug into a mains socket. The power indicator visible
behind the front panel will light up.
Switch your TV on and if necessary press the ‘STANDBY’ button on the remote
control until the light on the Digital Box front panel lights up.
The Easy install screen
The first time installation will
appear on screen. Select the
aspect ratio (screen size),
using the }| buttons to
move between the options:
NORMAL and WIDESCREEN.
Press the OK button to start
the installation. The Digital
Box will automatically begin
to tune.
04
First Time Installation
Press OK to start Tuning Scan
NORMAL
Select Your TV Screen type using the arrow buttons
Bush STB202XI2.indb 7 22/09/2009 11:20:07
8
Tuning in
When your digital box is tuning
in, you will see the channels
that have been found during
the installation listed (right).
This screen also shows you,
the signal strength and quality
of the signal being received.
It will take a few minutes for
your digital box to find all the
channels.
4
5
6
Installation complete
When installation has successfully completed, the channel at the top of the
channel list will be shown on your TV. The information banner for this channel will
be displayed for a few seconds.
Problems installing?
If steps 1 to 5 have not installed your digital box, there are a couple of things that
you should retry.
1. Check all connections to your digital box and TV, making sure that they are
secure and connected to the correct sockets. See page 6.
2. Try the installation again:
Press the • MENU button on your remote control.
Select ‘System Installation’ using the up and down arrows.•
Press the • button to select ‘Auto Scan’.
Press the • OK button.
Getting started
22:25-22:35 BBC London News
22:35-22.45 The National Lottery Draws
12/08/2009 22:32:30
1 BBC ONE S 1/1
Tuning Menu
Progress
Signal Strength
17%
84%
BBC ONE
BBC TWO
ITV 1
BBC THREE
BBC FOUR
ITV3
SKY THREE
Exit
Channels 13
04
Bush STB202XI2.indb 8 22/09/2009 11:20:07
Loading...