Bush LED32T3, S6 Instruction Manual

INSTRUCTION MANUAL

32”/40” 1080P D ig ital LED LCD Television

Customer helpline: 0845 604 0105

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 1

Contentss

01 Safety Warnings 2

Welcome ................................................................................2

Important Information ......................................................2

Safety notice .........................................................................3

Electrical connections........................................................4

02 About your LED LCD TV 5

Viewing the Control Panel................................................5

Viewing the Connection Panel.......................................5

Get to know your remote control..................................6

Installing the Stand ........................................................... 7

Connecting your TV............................................................7

Preparation of your remote control..............................8

03 Getting Started 9

Setting up...............................................................................9

Tuning your TV .....................................................................9

Common interface .........................................................12

Using your TV..................................................................... 14

Adjusting picture settings............................................. 14

Adjusting sound settings .............................................. 15

Function settings.............................................................. 16

Time settings...................................................................... 17

Lock menu settings ......................................................... 18

Shortcut menu display ................................................... 19

04 Using the features 21

Teletext functions............................................................. 21

USB mode............................................................................ 22

Using external USB disk for recording ......................24

05 Reference Sections 26

Troubleshooting............................................................... 26

Specification ...................................................................... 27

06 Product Guarantee 28

P.02 BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105

01 Safety Warningss

WELCOME

Thanks for buying this 32"/40" 1080P Digital LED LCD TV. This guide will help you set up and begin using your TV.

First, check the contents of your box with the parts checklist below:

32"/40" 1080P Digital LED LCD TVt

Remote controlt
AAA battery t ×2
Instruction Manualt

Quick Start Guidet
TV stand t
5 x Screws for TV standt
Component adapter , Component audio adapter , SCART adaptert
TV Digital Guidet
Cover-Bottom t

Now you can get started!

IMPORTANT INFORMATION

READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.
FOR ANY PROBLE

MS, REFER SERVICING TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING ARROW SYMBOL IN

THE TRIANGLE: THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF

CONT

ACT WITH ANYINSIDE PART OF THIS PRODUCT.

THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE

CONCERNING OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT.

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR

SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH OR DAMAGE

THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.

NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORISED AND COULD LEAD TO INJURY OR PRODUCT

DAMAGE. REFER ALL SERVICING TO THE CUSTOMER HELPLINE.

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 P.03

01 Saftety Warnings

SAFETY NOTICE

For your protection,please read these instruction completely and keep this manual for future reference.O

Please ensure that the set has adequate ventilation.O

Do not place the set near a heat sourc

e or in direct sunlight.O

Do not put the unit near water or oil as it may cause a re.O

During thunderstorms, unplug both the antenna and power plug to prevent damage.O

Do not use a damaged power

plug or put the power supply near a heat source as it may cause electric shock or O

re.

To prevent potential re, do not overload an electrical outlet with too many plugs. O

Place

the set on a level surface to prevent it from tipping and potential damage.O

Do not remove the cover of the set or try to service your TV. This may result in electrical shock or re. All service O
work must be completed by an authorised technician.

If there are any abnormal sounds or smells from the unit, unplug it immediately and contact an authorised O
service provider.

To prevent re, do not use or store any ammable materials near the unit.O

To prevent re, do not place the unit near a damp wall.O

To prevent electric shock, ensure that any external antenna connected to the set is clear of contact with any O
power lines.

Do not plug/unplug the unit while your hands are wet. This may cause an electric shock.O

Please ensure a solid connection with the AC wall socket in order to avoid shock and potential re.O

To prevent electric shock or re, please prevent rain from entering the set along the wire connected to the O
outside antenna.

When cleaning, please unplug the unit. Use a soft cotton cloth. Do not use any abrasive cleansers, and prevent O
water from entering the set.

If any plugs or input wires are dirty, unplug the set and clean them. This will prevent the risk of electric shock or O
re.

If the set is not going to be used for an extended period, unplug the unit from the main power.O

The apparatus should not be exposed to dripping or splashing and no objects lled with liquids, such as vases

should be placed on the apparatus.

The mains plug is used for disconnecting the device, make it easily accessible.

Do not use any accessories that are not recommended by the manufacture.

P.04 BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105

ELECTRICAL CONNECTIONS

CONNECTING TO POWER

Check that the voltage marked on the product corresponds with your supply voltage. This product is tted with a

13A plug complying with BS1363. If this plug is unsuitable or needs to be

replaced, please note the following:

PLUG REPLACEMENT

If you need to replace the tted plug:

WARNING

Never connect live or neutral wires to the earth terminal of the

plug. Only t an approved 13 Amp BS1363/A plug and the correct

rated fuse. If in doubt, consult a qualied electrician.

IMPORTANT

The wires in this mains lead are coloured as follows:

Blue Neutral

BrownLive

As the colours of the wires in the mains lead of this apparatus may not correspond

with the coloured markings identifying the terminals in your plug, proceed

as follows:

The wire which is coloured blue must be connected to the terminal, which is marked with N or coloured blue. The

wire which is coloured brown must be connected to the terminal which is marked L or coloured brown. The green

and yellow wire must be connecting to the terminal marked with the letter E or the earth symbol . Always ensure

that the plug cord grip is fastened correctly.

If a 13A (BS1363) fused plug is used it must be tted with a 3A fuse conforming to BS1362 and be ASTA approved. If

in doubt contact a qualied electrician.

WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH

HOUSEHOLD WASTE. PLEASE RECYCLE WHERE FACILITIES EXIST. CHECK

WITH YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE.

TruSurround XT, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is

incorporated under license from SRS Labs, Inc.

TruSurround XT® creates a truly immersive surround sound experience with rich bass and clear dialog from only

two speakers.

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 P.05

02 About your LED LCD TVs

HDMI 1 IN

USB

DIGITAL AUDIO OUT

(OPTICAL )

ANT IN

8

9

10

11

12

13

2 INIMDH

NITNENOPMOC

CP

Y P

b

P

r

L

OIDUA

R

NICP

3 INIMDHTRACS

1

2

3 4 5 6 7

PC/DVI AUDIO

Viewing the Control Panel

Viewing the Connection Panel

[TV Rear Panel] [TV Side Panel]

1

SCART

input

2

Component input

3

Component Audio

input

4

PC input

5

PC/DVI AUDIO

input

6

HDMI3 IN input

7

HDMI2 IN

input

8

Common Interface

9

Earphone

0

ANTENNA input

A

Optical output

B

USB

C

HDMI1 IN input

1

2

3

4

5

LOV

HC

UNEM

ECRUOS

1

SOURCE

Toggles between all the available input
sources

2

MENU

Press to see an on-screen menu of your TV’s
features.

3

VOL+/- Press to increase or decrease the volume .

4

CH+/-

Press to change channels.

5

POWER Press to turn the TV on and o.

P.06 BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105

GET TO KNOW YOUR REMOTE CONTROL

When using the remote control, aim it towards the remote sensor on the TV.

1

Stand By

2

DVD Menu / REC

3

DVD open / close

4

Picture Mode

5

Sound Mode

6

Call Screen Display

7

Sleep button

8

DTV Audio / NICAM / DVD Audio

9

Aspect Ratio Control button

0

Channel list button

A

Subtitle button

B

Program Number Channel selection

C

Source Exchange

D

Q.VIEW / Swap Channel

E

V+/V-: Volume selection

F

P+/P-: Channel selection

G

Mute

H

Menu button

I

GUIDE button (only for DTV)

J

Favourite list button

K

OK button

L

Cursor Mover button

M

Back button (only for USB)

N

Exit Screen Display

O

REPEAT (only for DVD, USB, REC & Timeshift)/CANCEL button

P

Zoom (only for DVD & USB)/Teletext index (only for TV) / REC index

Q

Play / Pause button (only for DVD & USB) / Timeshift

R

Stop (only for DVD, USB, REC & Timeshift)

S

Fast Reverse (only for DVD, USB, REC & Timeshift)

T

Fast Forward (only for DVD, USB, REC & Timeshift)

U

Previous (only for DVD, USB & REC)

V

Next (only for DVD, USB & REC)

W

DVD Set up / Text

X

DVD Title / Teletext Mix

Y

DVD Search / Teletext Subcode

Z

DVD 10+ / Teletext Hold

[

DVD Program / Teletext Reveal

\

DVD A-B Repeat / Teletext Size

]

DVD Call / Teletext Mode

`

DVD Angle/Teletext Time

Note

RED button, GREEN button,O BLUE
button and YELLOW button are fast
text button in analog signal. Function
button in DVBT (just reference the
OSD)

BUSH | 1080p Digital LED LCD| User Manual | Helpline: 0845 604 0105 P.07

02 About your LED LCD

Installing the Stand

To get started, you need the (5) screws that are included in the box with your TV .

Glass stand is BS EN 12150: 2000 comply

Model / Catalogue Number: 529-6091
Retailer: Argos
Retailer address: 489-499 Avebury

Boulevard
Saxon Gate West
Central Milton Keynes
MK9 2NW

To attach the stand to your TV, follow these steps:

Lay your TV screen down on a soft surface such as a couch or bed.

A

Make sure to distinguish between the front and back of the stand when assembling them.B
Attach your stand to the TV.C
Make sure the stand is installed on the stand at a proper level, do not apply excess pressure.D

Fasten the (5) screws at the ve positons as the right picture.E

CONNECTING YOUR TV

ANTENNA CONNECTION

Connect your aerial to the side of the TV into the ANTENNA IN socket.

IMPROVE YOUR SIGNAL

To improve picture quality in a poor signal area, use a signal amplifier (not supplied).

CONNECT YOUR PC TO THE TV

You can use your TV as a monitor for your personal computer by connecting it with a VGA cable (not supplied).

Read your computer user guide and check it has a VGA connector.

A

Turn the power o on your TV and PC.B
Connect a D type 15-pin VGA interface cable to the VGA video interface connector on the PC. Connect the other C

end of the cable to the PC interface connector on the TV. Tighten the screws on the VGA connectors and connect
the audio cable (not supplied) to the audio input socket on the back of the TV.

Turn on the power of the TV firstly and then the PC.

D

Press the button on the TV or TV remote control to set the video input mode to PC.E
Once the image shows, if there is noise present, change the VGA mode to another resolution, change the refresh F

rate to another rate or adjust the brightness and contrast on the menu until the picture is clear.

P.08 BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105

CONNECT A DVD PLAYER TO YOUR
TV

Connect the DVD video outputs (Y, Pb, Pr) with the
supplied component adapter and component audio

adapter to the COMPONENT (Y, P

b, Pr) IN socket on your

TV.

Turn on the DVD player and insert a DVD.

A

Press the source buttom on the remote control to B
select the source of COMPONENT in your TV .

Refer to the DVD player user guide for operating

C

instructions.

DVD

SCART INPUT

Connect the scart lead from the external device A
(DVD player, Set-top box or games console) with the
supplied SCART adapter to the TV scart socket.

Press the

B SOURCE button to select SCART mode.

Press the

C PLAY button on the external device.

HDMI INPUT

Connect the cable from the HDMI device to the TV A
HDMI socket.

Press the

B SOURCE button to select HDMI mode.

Refer to the HDMI device user guide for how to

C

operate.

MOUNT YOUR TV ONTO THE WALL

You can mount your TV onto the wall by using a wall
bracket (not supplied). Use M4/M6 machine screws (4
pcs) to screw the TV onto the bracket (not supplied).

PREPARATION OF

YOUR REMOTE

CONTROL

BATTERY INSTALLATION

Place the remote control face down, then open the A
cover of the battery compartment.

Install two AAA batteries. (The + and - symbol of the B
battery must match with the marks on the remote).

Close the cover of the battery compartment.C

BATTERY CAUTION

Confirm there is no object between the remote control
and the remote sensor of the TV set.

Sunshine or other strong light will interfere with the
signal sent by the remote control. In this situation turn
the TV set to avoid the direct light source.

Do not put the remote control in direct heat or in a
damp place as you may damage the remote.

Please use two AAA 1.5V batteries. Do not mix battery

types. Install the batteries at the correct polarities. D

o

not use rechargeable batteries. If your TV is to be stored

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 P.09

03 Getting Started

for a period of time, remove the batteries from the
remote control.

03 Getting Started

Setting up

LOCATION

You will need to place your TV near your plug socket (so
the power cable can comfortably reach) and within reach
of your aerial socket or extension lead.

CONNECTION

Insert your TV aerial lead into the Antenna input at A
the side of the TV.

Insert the batteries into the remote control. Make

B

sure they are inserted the right way around,
matching the polarity as indicated inside the battery
compartment.

SWITCHING YOUR TV ON

Press the A button on the right side of the TV once.
A red ashing light will appear in the middle of the
screen.

Press

B on the remote control. The TV will turn on

and the red light will ash. This may take a few

moments.

Select your chosen language when prompted from

C

the list that will appear on screen. Use the  button
to scroll to the language you want and press to
confirm.

TUNING YOUR TV

SWITCHING TO AN EXTERNAL
SOURCE OTHER THAT TV

If you have attached a DVD player or similar external
device to the TV, you will need to tell the TV to display
the content from it. Simply press SOURCE which will
bring up the source menu in the left corner of the

screen, use the  and  button to highlight the
required source and press OK select.

For details of how to plug in other equipment see GET
TO KNOW YOUR TV on page 5.

AUTO SEARCH

Press A MENU button.

Press B  button to select Tuning menu, press 
button to enter.

Press

C  button to select Country item.

Press  button to select you needed.

Press

D  button to select Auto Search item, press

OK button to enter.
Press  button to select the OK option, and press
OK button to start searching.
Press the MENU button, you can choose to skip the
TV /DTV Search or not.

DTV

P.10 BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105

Press E EXIT button to stop auto search during
searching.

Note

It may take a few moments to complete the Auto O
Search.

DIGITAL MANUAL SEARCH

Press A MENU button.

Press B  button to select Tuning menu, press 
button to enter.

Press

C  button to select Digital Manual Search

item, press  button to enter.

Press D  button to select the Channel.
Press OK button to start searching.

Once a channel is located, you can press

E OK button

to save it.

Press EXIT button to exit.

Analog Manual Search

Follow the below steps when you need to have a manual
search.

Press

A MENU button.

Press B  button to select Tuning menu, press
button to enter.

Press

C button to select Analog Manual Search

item, press  button to enter.

Press D  button to select Search item, press
button is used to select the higher frequency
channel.
Press  button is used to select the lower frequency
channel.

And then select Storage To, press

E  button to

select the position number you want the channel
on. Once a channel is located, you can press red

button to save it. Press EXIT button to exit.

Sound SystemV

Press button to select “ Sound System”, then
press  button to select the correct sound system.

Current CHV

Press  button to select the channel number to

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 P.11

03 Getting Started

edit.

Storage ToV

Press  button to select the program number you
want to storage to.

Fine tuneV

If the picture and/or sound are poor, try using the
FINE TUNE feature. Do not use this feature unless

reception is poor.

Repeat above steps

A A-C, then press button to

select the Fine Tune item.

Press

B  button repeatedly to carry out fine

tune, till the best picture and sound are obtained,
then loosen the button.

Channel Edit

Using this function, you can rename, move, set favorite
channel and skip the channel in the analogue mode.

Press

A MENU button.

Press B  button to select TUNING menu, press 
button to enter.

Press

C  button to select CHANNEL EDIT item.

Press  button to enter the sub-menu. You can

press red, green, yellow or blue button to enter the
menu you need.

RENAME

Press A  button to select the channel, and press
green button to rename.

PressB  button to select the number position of
channel name. Press  button to select number.

You can press the

C EXIT button to cancel the changes

at anytime.

Note

The RENAME function is only available in ATV O
program.

MOVE

Press A  button to select the channel and press
yellow button to select the position.

Press

B  button to select the number position you

want to remove to, press yellow button to confirm.

You can press the

C EXIT button to cancel the changes

at anytime.

Setting favourite channel

Press A  button to select the channel, press red
button to set your favourite channel.

You can press the red button to cancel the changes

B

at anytime.

Press

C FAV button on the remote control and

Favourite List will be displayed.

Press

D  button to select the channel, and press

OK button to enter.

SKIP

PressA  button to select the channel and press
blue button to skip the current channel.

P.12 BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105

You can press theB blue button to cancel the changes

at anytime.

GUIDE (Electronic Program Guide)

Using this function, you can access the DTV program
information.

Press

A MENU button.

Press B  button to select TUNING menu.
Press button to enter .

Press

C  button to select the guide item.

Press OK button to enter the submenu, the
electronic program guide is displayed.
You can quickly call up Guide menu by GUIDE
button on the remote control.

Note

Only DTV mode.O

COMMON INTERFACE

The common interface (CI) slot is designed to accept the
Conditional Access (CA) Module and Smart card in order
to view the pay TV programmes and additional services.
Contact your Common Interface service provider to get
more information about the modules and subscription.
Please noted that CA modules and smart cards are
neither supplied nor optional accessories from us.

Warning

Switch o your TV before any module is inserted in t
the Common Interface slot.

Insert the CAM correctly, then Smart Card to the CI A
slot that is located at the side of the TV.

CI Slot

CAM

Smart Card

Turn on the TV and it will display the below message B
if the CA module is detected. Wait for few moments
until the card is activated.

Press the

C MENU button to display the Main Menu

and use the  and  button to highlight the “ CI
information” line and press the “ OK” button.

Detailed information on the CI card in use is

D

displayed.

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 P.13

03 Getting Started

Press E OK button to access the card menu. Refer to
the module instruction manual for setting details.

When module is removed, the following message

F

will appear on the screen.

Software Update function

When you get the updating news from the TV shop’s t
web, you can update the operating software using

the Download menu. The data for various units are
transferred consecutively on a special receiving

channe

l.

You need to search the channel with updating code t
stream.

Note

You can get information from the TV shop or O
internet.

Operation

Press A MENU button.

Press B  button to select TUNING menu, press 
button to enter.

Press

C  button to select Software Upgrade item.

Press

D  button to set it as On. (The default is O)

The Start Upgrade item can be selected.(The default

E

is grey and cannot be selected).

13%

Press EXIT to cancel download

Press F  button to select the Start Upgrade
option and use OK button to enter. Then the TV will
restart and search the upgrade information.

Note

If the upgrade information is received, the TV will O
begin to upgrade. Or else, the TV will be back the
DTV source.

Load the receiver identification. This process may

G

also take several minutes. You can press EXIT button
to cancel the download and your TV set will be back
the DTV source.

100%

15%

Press EXIT to cancel download

Updating in progress - Do not turn off the TV

P.14 BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105

After the download has finished, your TV set will H
enter burning state and the indicator light is shining.

The menu 4 of right appears.

The set will be back the DTV source when the update is
completed.

USING YOUR TV

How to select the TV program

Using Program number button Enter the channel A
number with the number keypad on the remote
control.

Using

B P+/P- button.

Press the P+/P- button to select a channel number.

HOW to adjust volume

Press V+/V- button on the remote control or the side of
the TV to adjust the volume level.

CH.LIST function

Press CH.LIST button on the remote control will display
Channel List menu, and then press  button to enter.
Press button to select the channel, and then press

OK button to enter.

ADJUSTING PICTURE

SETTINGS

Changing the Picture Setting

Press A MENU button.

Press B  button to select Picture menu, press 
button to enter.

Press

C  button to select the item requires

adjusting.

Press

D  button to adjust the selection item.

When you are satisfied with your choice, press the

E

EXIT button to return to normal viewing or press
MENU button to return to the previous menu.

ContrastV

This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.

BrightnessV

This will adjust the light output of the complete
picture, which will mainly aect the darker areas of
the picture.

ColourV

This will adjust the saturation level of the colours to
suit your personal preference.

SharpnessV

This will adjust the sharpness of fine details in the
picture.

TintV

Allows you to select the colour mix (Tint) of the
picture.

Note

The Tint function is only available in NTSC mode.O

ModeV

This will select the picture mode. Select Standard/
Mild/User/Vivid according to the program. You can

quickly select the desired mode by P.MODE button on
the remote control.

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 P.15

03 Getting Started

Colour temperatureV

This will increase or decrease Warm (red) and Cool
(blue) colours to suit personal preferences.

Select Cool to give the white colour a blue tint,
Normal to give the white colour a neutral tint, Warm

to give the white colour a red tint.

Noise ReductionV

Automatically filters out and reduces the image noise
and improves picture quality when receiving weak
video signals.

Select O/Low/Standard/High according to the
image noise.

ResetV

To recover to the default value.

ADJUSTING SOUND

SETTINGS

Changing the Sound Setting

Press A MENU button.

Press

B  button to select Sound menu, press 

button to enter.

Press

C  button to select the item requires

adjusting.

Press

D  button to adjust the selection item.

When you are satisfied with your choice, press the

E

EXIT button to return to normal viewing or press
MENU button to return to the previous menu.

BalanceV

This will adjust the output of the right and left
speakers to obtain the best stereo reproduction for

your listening position.

ModeV

This will select the sound mode.
Press  button to select Standard/Music/Theater/

User according to the program. You can quickly select
the desired mode by S.MODE button on the remote
control.

AVL V (Automatic volume control)

This will reduces the dierences in volume level
among broadcasters.

SRS TS XTV

This will control the Woofer output.
Press  button to select SRS TS XT.
Press  button to set SRS TS XT as OFF, ON.

Digital Audio OutputV

This will control the Digital Audio Output.
Press button to select Digital Audio Output.,
Press button to set Digital Audio Output. as OFF,

RAW , PCM.

EqualizerV

This sound setting can be adjusted to suit your

personal preference.

Audio LanguagesV

Press  button to select Primary/Secondary item,

and then press  button to select the languages

you needed.

Press  button to select Close item, press OK button

to close it.

Function

Tuning

Balance
Mode
AVL
SRS TS XT
Digital Audio Output
Equalizer
Audio Languages
Reset

Picture







!
!
!
!
!

OK

Sound

Lock

Time

0

Standard

Off
Off

OK

OK

English

Menu

Off

Function

Tuning

Balance
Mode
AVL
SRS TS XT
Digital Audio Output
Equalizer
Audio Languages
Reset

Picture







!
!
!
!
!

OK

Sound

Lock

Time

0

Standard

Off
Off

OK

OK

English

Menu

Off

2XWSXW

JHV




OK

OK

OK

(QJOLVK

2II

P.16 BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105

Note

The Audio Language function is only available O
in DTV mode.

ResetV

To recover to the default menu setting.

FUNCTION SETTINGS

Press A MENU button.

PressB  button to select Function menu, press 
button to enter.

Press C  button to select the item requires adjusting.
PressD  button to adjust the selection item.

When you are satisfied with your choice, press the

E

EXIT button to return to normal viewing or press
MENU button to return to the previous menu.

LanguageV

To select the menu language.

Subtitle LanguageV

To select the Subtitle language.

Display ModeV

To set the picture proportion, press button to
select 4:3/Zoom1/Zoom2/Wide/16:9/Auto. You can
quickly select the desired mode by SCREEN button on
the remote control.

4:3 modet

Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio, with gray bars
appearing at both the left and right sides.

16:9 modet

Choose 16:9 when you want to adjust the picture
horizontally, in a linear proportion to fill the entire
screen.

Zoom1t

Choose Zoom1 when you want to view the picture
without any alteration. However, the top and
bottom portions of the picture will be cropped.

Zoom2t

Choose Zoom2 when you want the picture to be
altered, both vertically extended and cropped.
The picture taking a halfway trade o between
alteration and screen coverage.

Widet

Choose Wide when you want to adjust the picture
in a non-linear proportion, that is, more enlarged
at top sides and no alteration, at bottom side.

Blue ScreenV

This will select the character background colour.

Note

The Blue Screen function is only available for O

ATV mode.

RecorderV

To recorder the DTV program. Details of Recorder are
described in the page of 24 -26.

SCART InputV

The item is not able to be selected.

OSD Time OutV

To set how long you want the menus to appear
on-screen. Each press of  button repeatedly to
select the number of preset minutes, the Time will be
set in sequence: o, 10sec, 15sec, 30sec, 45sec, 60sec.

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 P.17

03 Getting Started

OSD TransparencyV

To set the transparency background of OSD, the
transparency will be set in sequence: O, 25%, 50%,
75%, 100%.

ResetV

To recover to the default value.

TIME SETTINGS

ClockV

Press A MENU button.

Press

B  button to select Time menu, press 

button to enter.

Press

C  button to select Clock item, press 

button to enter setting.
Press  button to select hour or minute, press
 button to adjust the value.

DateV

Press A MENU button.

Press

B  button to select Time menu, press 

button to enter.

Press C  button to select Date item, press 
button to enter setting.
Press button to select the option, and then
press  button to adjust value.

Note

In DTV mode, because the time information is O
from the signal, the Clock and Date are not able

to be changed.
If you want to change the time, turn o the TV in
ATV mode, then turn on the TV.

O TimeV

Press A MENU button.

Press

B  button to select Time menu, press 

button to enter.

Press

C  button to select O Time item, press 

button to enter setting.
Press  button to select Repeat option, and
then pressbutton to set it on.
Press button to select hour or minute, press
 button to adjust the value.

When the o time has arrived, the TV set will
enter into standby mode.

SleepV

The sleep timer automatically shuts o the TV after a
preset time (from 5 to 240 minutes).

OK

OK

OK

OK

OK

OK

OK

Hour < 02 >
Minute < 03 >

Close

Menu

OK

OK

OK

OK

OK

OK

OK

Date < 02 >
Month < 3 >
Year < 2009 >

Close

Menu

OK

OK

OK

OK

Repeat < Off >
Hour < 00 >
Minute < 00 >

Close

Menu

P.18 BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105

Press theA MENU button and then use  button
to select the Time menu.

Press the

B  button and then use  button to

select the Sleep.

Press the

C  button and then use  button

to select the number of minutes. Select O, 5Min,

10Min, 15Min, 30Min, 45Min, 60Min, 90Min,
120Min, 180Min, 240Min.

When you are satisfied with your choice, press

D

MENU button to return to the previous menu or
press the EXIT button to return to TV viewing.
And the time begins to count down from the
number of minutes selected.

Time ZoneV

Press A MENU button.

Press

B button to select Time menu, press 

button to enter.

Press

C button to select Time Zone item.

Press

D  button to select the correct time zone.

Press

E MENU button to save and exit.

LOCK MENU

SETTINGS

Using this function can control the tuner, program,

source volume and so on. Pressing MENU on the remote

control, press  button to select Lock menu, press 
button to enter the sub-menu, and you will be required

to enter the

password. The initial password of the
television is 0000. If you forget your password, you can
always input 9443 to regain control.

CHANGE PASSWORDV

Press A  button to select Change Password
item. Press  button to enter the submenu.

When you have inputted the four digits you will

B

be prompted to enter it again.
Your new password will then be automatically
saved.

CHILD LOCKV

Press button to select Child Lock.
Press  button to set On or O mode. If lock on

mode is set, Child Lock is in activated automatically.
In such case, if Child Lock button (button on the
television) is pressed, the screen will display Child
Lock, which can be erased by press of MENU button.
5 seconds later after the latest press, the screen
display will disappear automatically. The Child Lock
mode can be resumed by entering Lock Set menu, set
Child Lock On or O.

Tuning LockV

Press  to select Tuner Lock and  to set On/O.

OK

OK

Menu

OK

OK

Menu

OK

OK

OK

OK

Menu

OK

OK

OK

Menu

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 P.19

03 Getting Started

(To set On, some operation such as search will be not
available. When enter the Tuning menu, Tuner Lock
will be on the screen. If you want to operate Tuning

menu, you need to enter the Lock menu to set Tuner
Lock

O or operate unlock.)

Channel NO.V

Channel NO. is opted for setting up preset channel.
Press  button to select preset Channel. Press 

button to select channel number.

Source setV

Channel set is opted for setting up start source.
Press  button to select O, DTV, TV, SCART ,

Component, PC, HDMI1, HDMI2, HDMI3, USB in turn.
DVD is available for some model.

Source LockV

Source Lock will control the On or O of hinder
external input modes.

Press  button to set as on or o.
When the source lock is set as on, TV source will
display, at this time, when press SOURCE button,
the TV can switch to corresponding source and will
display the Source is locked.

Max VolumeV

Press  button to select Max Volume. Press 
button for adjustment between 0-100. If a certain
Value is set, when volume is being adjusted, the

sound value can not exceed maximum volume value.
If current volume is over Max Volume, when lock set
menu is set, current volume will become set maximum

volume, if current volume is below maximum volume,
customer set volume will stay unchanged.

Initial VolumeV

The TV will remember it after your setting, that will be
the volume when turn on the TV next time.

Parental LockV

Press  button to select parental lock. Press 
button to select OFF or 4-18 to limit the age of
children who will watch TV.

Clear LockV

Press  button to select Unlock mode. Press 
button to unlock all set modes, setting all lock options
to o, and the maximum volume returns to 100.

SHORTCUT MENU

DISPLAY

Subtitle FunctionV

Press A SUBTITLE button on the remote control will
display Subtitle languages menu, press  button
to enter.

Press B  button to select the item and press OK
button to enter. You can press the EXIT button to
cancel the changes at anytime.

Note

Press O SUBTITLE button on the remote, it will
display subtitle languages menu only in the DTV
mode.

CH.LIST FunctionV

Press A CH.LIST button on the remote control, will
display Channel List menu.

Press B  button to select the channel and press

OK button to enter. You can press the EXIT button
to cancel the changes at anytime.

OK

OK

Menu

P.20 BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105

GUIDE FunctionV

Press GUIDE button on the remote control, will
display Program Guide menu, press button

to select the program.
You can press the EXIT button to cancel the changes
at anytime.

Note

AvO ailable only in the DTV mode.

FAV FunctionV

Press FAV button on the remote control, will display
Favourite List menu.
Press  button to select program and press OK
button to enter. You can press the EXIT button to
cancel the changes at anytime.

INFOV

Press INFO button on the remote control, will display
the current channel information.

You can press the EXIT button to cancel the changes
at anytime.

AUDIO/I/IIV

Press AUDIO button on the remote control, will
display Audio Languages menu.
Press  button to select the desired settings and
press OK button to enter.
You can press the EXIT button to cancel the changes
at anytime.

Note

Press O AUDIO button on the remote, it will
display Audio Languages menu only in the DTV
mode.

Eliminate SoundV

When you need to pay attention to surrounded
sounds, or there is a telephone calling you
or there are some guests visiting you, the sound
elimination (mute) function is very convenient.

Press theA MUTE button on the remote control and

“Mute” type face will display on the lower part of

the screen. At this Time, the sound of the TV set is
turned o.

If you want to recover the sound, press the

B MUTE

button again or directly press V+ button.

Quick program viewV

This function enables quick swap to the last watched
program. Press Q.view button, and the TV will be back
to the TV source, expect in the USB and DVD source.

Suppose the channel number you used just now

A

is 8 and the channel number you are using is 18

(as shown in the figure).

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 P.21

04 Using the features

If you want to return to the last watched program B
channel 8, you can simply press the Q.Vie w button.

If you want to return to channel 18, press the C
button again. Use this function, you can easily
change between the channel you are using and
the channel you used last Timer.

04 Using the features

Teletext functions

Teletext is an information system, broadcast by certain
channels, which can be read like a newspaper. It also

provides subtitles for people with hearing difficulties or
those who are unfamiliar with the language in which a
particular program is being broadcast (cable networks,
satellite channels, etc.).

Note

The O teletext buttons could be working even if
there is no teletext signal, but there is no teletext
display.

Teletext

Teletext functionsV

To select “teletext” press the button on the
handset. To switch o teletext, press the button
again. “Note all menu functions are not available
in teletext mode”. Only a few direct button control
functions are available in teletext mode,

they are:

Volume adjustment t

Mute functiont

Page up/downV

Use the P+/P- buttons to browse next or previous
page.

Page number enteringV

To select a Teletext page, enter the page number
using the numeric key pad on the remote control,
or use the P+ or P- buttons, or the coloured Fast text

buttons.

Mix modeV

To view the TV picture while in Text mode press the
button, this will superimpose the Teletext data on top
of the TV picture. Press this button again to return to
Full text.

INDEXV

Press the INDEX button to go to the index page of
teletext.

Language changeV

Pressing the button will change the Teletext
characters between Eastern and Western.

HoldV

Pressing the button will stop the teletext page
automatically updating. This feature is very useful
where there are several teletext pages or data on the
same page number.

P.22 BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105

SizeV

Pressing the button changes between full screen top
half bottom half full screen. This feature is very useful as
it magnifies the image making the characters easier to
read.

RevealV

Pressing the button will reveal hidden text. This
feature is used to reveal information such as answers to
Teletext on-line interactive puzzles.

TimeV

While in normal TV mode only, pressing the button
will display the teletext time in the top right hand corner
for a few seconds.

Fast text colouredV buttons

Fast text automatically displays the four most commonly
used pages that the broadcaster thinks that you may
want to choose next. Press the same coloured button on
the remote control as the coloured link at the bottom of
the teletext page to go directly to that page.

SubcodeV

Pressing the button by entering its 4-digit number to
enter a secondary page.

USB MODE

Note

The diagrams in the following section are schematic O

and only for your reference. Please see the actual
product if necessary.

TO USE THE USB DEVICE

Supported file formats:A

Photo: *.jpg;t

Music: *.mp3 files;t
Movie: *.avi files;t
TEXT: *.txtt

Note

Due to the particularity of file cording, some files O
may be unable to read.

Supported equipment:

B

Support the equipment that supports Mass Storage
Protocol and whose file system is FAT32, such
as some USB disks, mobile harddisks, and MP3
player. If USB equipment could not be identified
d

ue to unsupported file system, please format the

equipment to the above-mentioned file system.

To achieve smooth playing, ensure the following:

C

The file code rate should be lower than 300KB/S;t
Due to the limitation of USB signal transmission t
distance, it is recommended not to use USB patch
cord, in case of using the cord, make sure that its
length is not over 1m;
Use high-speed USB equipment in conformity t
with USB2.0 full speed Interface Standard; If USB

equipment in conformity with USB1.1 full speed
Interface Standard is used, the playing may be
unsmooth.

When connecting/removing the USB
device

Press “A SOURCE” on the remote control unit to select
USB option.

Insert USB equipment into corresponding USB

B

interface 2s after starting the system.

After entering the system menu, press “

C /“ on the

remote control unit to select the require USB files,
press “OK” b utton to confirm the selection and enter
the file list relative to the selection.

Press D “/“ on the remot e control unit to select the
required file, press “OK” b utton to enter the selected file.

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 P.23

04 Using the features

To exit the streaming media playing system and E
watch a TV program, you must press “BACK” button
to return to the streaming media main menu at first
(to protect equipment), and then press “SOURCE” to
select “TV” to return to the TV mode.

Note

Under source of USB, whenQ press button MENU,
screen goes black, except when images or movies

are being played.

While playing the USB, press “Q BACK” button

repeatly, the screen picture will return to USB
main interface, and only at this time you can
switch corresponding signal sources by pressing

“SOURCE” again.

Please do not unplug the USB device when the Q
connected USB storage device is working. When such
device is suddenly separated or unplugged, the stored
files or the USB storage device may be damaged.

Operating the USB device

Press “A /“ to scroll through main menu or
submenu and select your desired option.

Press “

B OK” to confirm your selection.

Press “

C /“ to achieve the FWD (fast forward) and

REV (fast back) of the option being played.

Press “

D PLAY/PAUSE” to play, and press it again to

pause playing.

Press “E ZOOM” to magnify pictures; when the picture is
enlarged, press “/“ and “/“ to move the picture.

Press “F STOP“ to stop playing, or return to the
previous menu, and press “BACK” repeatedly to
return to the main menu.

Note

You can choose the photos or music in dierent O
files to play together.

Playing a Picture

After entering USB main interface, press A “/“ to
select “ PHOTO” item.

Press ”

B OK“ to confirm the selection and enter the

picture file list.

Press

C “/“ to select the picture you want to play,

press ”OK“ to confirm, and then press “PLAY/PAUSE”
button to play the pictures.

If you want to pause the picture which is being

D

palyed, press the PALY/PAUSE button again.
Press ”ZOOM“ to magnify the picture. When the

picture is enlarged, press “/“ and “/“ to
move the picture.

Press “PREV/NEXT“ to select the last or next picture.
Press “/“ to rotate the picture.

Press “STOP

” to stop the picture being played.

To exit playing, just press “

E BACK” repeatedly.

Note

The menu display varies with the photo name and O
pixel in your equipment.

Playing Music

After entering USB main interface, press A “/“ to
select “ MUSIC”.

Press ”

B OK“ to confirm the selection and enter the

music file list.

P.24 BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105

Press C “/“ and “OK” button to select the music
you want to play, then press “PLAY/PAUSE“ button
to play the music.
Press “

/“ to achieve the REV (fast back) and FWD

(fast forward) of the music being played.
Press “PREV/NEXT “ to select the last or next music.

Press “STOP

“ to stop the music being played,

when the current interface is the music being
played.

To return to the main menu, just press “

D BACK”

repeatedly.

Note

You can enjoy the music and the picture at the O
same time.

Playing a Movie

Atter entering USB main interface, press A “/“ to
select “ Movie”.

Press “

B OK” to confirm the selection and enter the

movie file list.

Press

C “/“ and “OK” button to select the movie

you want to play, and then press “PLAY/PAUSE”
button to play the movie.
Press “ZOOM” to magnify the picture.
Press “PREV/NEXT “ to select the last or next movie.

Press “STOP

“ to stop the movie being played.

To exit playing, just press “

D BACK” repeatedly.

Te xt

After entering USB main interface, press “A /“ to
select “Text” .

Press “

B OK” to confirm the selection and enter the

text file list.

Press “

C /” and “OK” button to select the text you

want to play, and then press “PLAY/PAUSE” button
to play the text.
Press “PREV/NEXT “ to select the last or next text.

To exit the “Text”

D mode, just press “BACK” repeatedly.

Note

You can enjoy the music and the text at the same O
time.

Using External USB

Disk For Recording

Insert the USB device with FAT32 format into the A
USB connector. Then, press MENU button.

Press B  button to select FUNCTION menu, press

 button to enter .

Press

C  button to select Recorder. Press OK

button to enter the submenu.

Press

D  button to Select Disk and press  or OK

button to enter. Press  button to select disk if

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 P.25

04 Using the features

your device has several disks.

Press

E  button to select Format and press  to

enter. Press  button to select the size you want
to format. Press OK button to format the USB Disk.

Note

The system will format the whole device and if your O
device size is bigger than 1GB, you can set the size
which is used for time shift.

Format may take several minutes and the time is

F

depending on the memory size. Press  button
to select the Time Shift Disk Size. The max device size

for Time Shift is 8GB. Then, press OK button to save.

Note

If you select all the size format for time shift, you O
can not do any recording.

Waiting for the system checking. And you can see

G

the speed data after the success checking.

Note

Only have to format when you use the device for O
record for the first time.

The minimum device size for record is 1GB. Provide O
device formatting function is up to 2TB. The max
Multi-Partition is 16 partitions and one is active at
a time.

Bit rate:O

Device bit-rate>4.5MB/s REC is safe at HD t
stream
Device bit-rate>1.5MB/s REC is safe at SD t
stream
Device bitt -rate<600KB/s REC is bad for REC

The system can not work normally if the USB O
device have the listing problem below:

The device has bug.t
The device has error block.t
The device reports the unfaithful size.t

IMPORTANT

USB device should be format as FAT32 format by t
your PC before insert to the USB connector.

TIME SHIFT

Time Shift function is only available in DTV mode. Press

PLAY/PAUSE to pause the program, and press PLAY/
PAUSE again, the time shift program will be played. If

you want to stop time shift function, press the STOP
button

.

You can stop the time shift program being played by

pressing the EXIT button.

RECORDING

Press A D.MENU button to record the program being
played, and press D.MENU or EXIT button to make
the recording interface minimum.

P.26 BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105

Press B STOP button to stop the program recording
being played.

For Playback the recorded program. Press

C INDEX

button to open the recorded list.

Press  button to select the content you recorded.
Press the  button to display the program
information.

Press  button to cancel.
Press OK or PLAY/PAUSE button to play the

program recorded and press STOP button to stop it.

Note

Changing the channel will not inuence the O
recording in the same frequency, but will inuence
the time shift. When the recorded program is being
played, you can not delete it.

Press theO INDEX button repeatedly, the program
will be displayed in the order of program name,
channel name, program time, file name and file
length.

TROUBLESHOOTING

To assist in location of possible faults use the help 
guide below:

No picture, no
sound

Verify if the television is
properly plugged in.
Verify if the television has a
proper supplied power source.
Verify if electricity is available.

Blank screen

Verify if correct signals are
input.
Operate

the remote to change
signal input to correct input.
Restart the television if power
supply is interrupted.

No sound

Press MUTE button and verify if
Mute mode is set.
Switch to other channel and
verify if the same problem
happens.
Press VOL+ button to see if the
problem can be solved.

Poor sound

Verify if sound system is correct.
Refer to user‘s manual for
adjustment.

No picture in
some channel

Verify if correct channel is
selected.
Adjust the antenna.

No color for
some channel
program
(black and
white)

Verify if the same problem exists
in other channels.
Check out of picture and sound
systems.
Refer to relative instructions
in the Manual for color
adjustment.

Spots with
some or all
pictures

Verify if the antenna is correctly
connected.
Verify if the antenna is in good
condition.
Make fine adjustment of
channel.

05 Reference Sections

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 P.27

05 Reference Sections

Television out
of control

Disconnect the television from
power supply and 10 seconds
later, connect the television
to the power supply. If the
problem still exists, contact

authorized after-sales service
for technical assistance.

Note

If the fault can not be repaired using the above O
guide consult with your local authorized service
centre.

The TV set must only be repaired by a qualified O

registered service person. Never attempt to
remove

the back cover as the TV set has dangerous

voltages in side that may cause a fatally or fire.

Specication

SCREEN SECTION

Typ e A-si TFT active matrix

Viewable angle 176 (H) 176 (V)

Colour system

PAL, SECAM, NTSC
(AV)

TV/VIDEO SECTION

Sound system BG, DK, I, L

Video input

SCART, Y P

b/Pr, YCb/Cr,

PC, HDMI, USB

GENERAL SECTION

DTV Y/Pb/Pr

Component: 480i/p, 576i,
720p, 1080i, 1080p

Power See rating plate

Power
consumption

See rating plate

Dimensions (W
× D × H) cm

102.0 × 29.0 × 72.4
(including base) (LED40T3)

79.1 × 21.0 × 56.6
(including base) (LED32T3)

Environment
conditions

Working temperature:
+5 °C - +35 °C
Working humidity:
20% - 80%
Storage temperature:

-15 °C - +45 °C

Storage humidity:
5% - 90%

Accessory

User manual
Remote control

Base cover
Quick start guide
Battery (×2)

*The part specifications of this TV set provided here are

for reference only.
Dierences may occur as product technology is
updated.
Design and specifications are subject to change
without notice.

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 P.28

06 Product Guarantees

Year

This product isguaranteed for twelve months from the date of original purchase. Any
defect that arisesdue to faulty materials or workmanship will either be replaced,
refunded or repairedfree of chargewhere possible during this period by the dealer
from whom you purchased the unit.
The guarantee issubject to thefollowing provisions:

- The guarantee does not coveraccidental damage, misuse, cabinet parts, knobs
or consumable items.

- The product must be correctlyinstalled and operated in accordance with the
instructions contained inthis manual.

- It mustbe used solely for domestic purpose.

- The guarantee will be renderedinvalided if the product is re-sold or has been
damaged by inexpert repair.

- Specifications are subject to changewithout notice.

- The manufacturer disclaims any liabilityfor the incidental or consequential damages.

- The guarantee is in addition to, and does not diminish your statutory or legal rights.

- In theevent of a problem with the product within the guarantee period callthe
customer helpline on0845 604 0105

Guarantor: Argos Ltd

489 - 499 Avebury Boulevard

Central Milton Keynes

MK9 2NW

PRODUCT GUARANTEE

This product isguaranteed against manufacturing defects for a period of

0090509580