It all begins here, with your instructions. Don’t worry,
there’s nothing too technical coming up. Just simple,
step-by-step guidance to get you up and running
quickly. Sound good? Then let’s get started.
Help and Guidance
We’re here to help you get the most from your DAB/
FM Digital Radio. Should you require any guidance, a
simple solution can often be found online at:
www.bush-support.com
If you still require further assistance, call one of our
experts on 0345 604 0105.
If you require any technical guidance or find that your product is not
operating as intended, a simple solution can often be found in the
Troubleshooting
2
Page 3
Contents
Safety information
1
Safety information 6
Getting to know your DAB/FM Radio
2
Ready? Let’s begin 12
Product Overview 12
First Charge / Recharge The Battery 13
Using your DAB/FM Radio
3
Basic Operation 18
DAB Operation 21
FM Operation 27
Sleep Function 31
Backlight Function 32
Language Function 33
Factory Reset 33
Software Version 34
Using Earphones 35
Reset Function 35
Other information
4
Specifications 38
Product support
5
Help and assistance 41
Disposal 43
Guarantee 45
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts
on 0345 604 0105
3
Page 4
Page 5
Safety information
1
Page 6
Safety information
Important - Please read these instructions fully
before installing or operating
SAFETY PRECAUTIONS
- Read all the instructions carefully before using the
unit and keep them for future reference.
- Check that the voltage marked on the rating label
matches your mains voltage.
- The unit must be placed on a flat stable surface
and should not be subjected to vibrations.
- Do not place the unit on sloped or unstable
surfaces as the unit may fall off or tip over.
- The mains socket must be located near the unit
and should be easily accessible.
- Avoid extreme degrees of temperature, either
hot or cold. Place the unit well away from heat
sources such as radiators or gas/electric fires.
Avoid exposure to direct sunlight and other
sources of heat.
- Never place any type of candle or naked flame on
the top of or near the unit.
- To reduce the risk of fire, electric shock or product
damage, do not expose this unit to rain, moisture,
dripping or splashing. No objects filled with liquids,
such as vases, should be placed on the unit.
- If you spill any liquid into the unit, it can cause
serious damage. Switch it off at the mains
immediately. Withdraw the mains plug and consult
your dealer.
6
Page 7
Safety information
Important - Please read these instructions fully
before installing or operating
- To prevent the risk of electric shock or fire hazard
due to overheating, ensure that curtains and other
materials do not obstruct the ventilation vents.
- Do not install or place this unit in a bookcase,
built-in cabinet or in another confined space,
ensure that a minimum of 10cm should be kept
around the apparatus for ventilation.
Safety
- Always disconnect the unit from the mains supply
before connecting/disconnecting other devices or
moving the unit.
- Unplug the unit from the mains socket during a
lightning storm.
- This unit will become warm when used for a
long period of time. This is normal and does not
indicate a problem with the unit.
7
Page 8
Safety information
Important - Please read these instructions fully
before installing or operating
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the unit’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock.
The exclamation point within an equilateral
triangle is intended to
alert the user to the presence of important
operating and maintenance (servicing)
instructions in the manual accompanying
the unit.
Interference
- Do not place the unit on or near appliances which
may cause electromagnetic interference. If you do,
it may adversely affect the operating performance
of the unit, and cause a distorted sound.
8
Page 9
Safety information
Important - Please read these instructions fully
before installing or operating
Supervision
- Children should be supervised to ensure that they
do not play with the unit.
- Never let anyone especially children push anything
into the holes, slots or any other openings in the
case - this could result in a fatal electric shock.
Service/Maintenance
- To reduce the risk of electric shock, do not
remove screws. The unit does not contain any user
serviceable parts. Please leave all maintenance
work to qualified personnel.
- Do not open any fixed covers as this may expose
dangerous voltages.
- Ensure to unplug the unit from the mains socket
before cleaning.
- Do not use any type of abrasive pad or abrasive
cleaning solutions as these may damage the unit's
surface.
- Do not use liquids to clean the unit.
9
Page 10
Page 11
Getting to know your
DAB/FM Digital Radio
2
Page 12
Getting to know your DAB/FM Radio
You’ll be up and running in no time
Ready? Let’s begin...
Please read these instructions carefully. They contain
important information which will help you get the
best from your product and ensure safe and correct
installation and operation.
If you require any further assistance, our technical
experts are happy to help. For full details, refer to
the product support section at the end of these
instructions.
Product Overview
Top view
1. ANTENNA
2. POWER/HOLD BUTTON
3. SCAN BUTTON
4. MODE BUTTON
12
Page 13
Getting to know your DAB/FM Radio
You’ll be up and running in no time
Front view
Right view
5. DISPLAY
6. MENU/INFO BUTTON
7. TUN/CH ◄ BUTTON
8. ENTER BUTTON
9. TUN/CH ► BUTTON
10. PRESET BUTTON
11. VOL-/+ BUTTON
12. HEADPHONE JACK
13. DC INPUT JACK
13
Page 14
Getting to know your DAB/FM Radio
You’ll be up and running in no time
Buttom view
14. RESET BUTTON
FIRST CHARGE / RECHARGE THE
BATTERY
The unit has a built-in rechargeable Lithium (Li)
battery. The battery is charged automatically
whenever the unit is connected to a computer
or USB charging device with the USB cable (USB
charging device & USB cable are not included). When
the unit is switched on, the screen display will show
a charging symbol to indicate the unit is in charging.
The charging symbol will appear full when finished.
14
Page 15
Getting to know your DAB/FM Radio
You’ll be up and running in no time
- Do not put the unit under high temperature
or heat sources.
- During battery operation, if the battery
becomes flat, the display will show Battery
Low, you should recharge the battery for
operation.
- The unit support computer charging and
5V 1A charging device (not included),
connecting the unit to any other power
source may cause damage the unit.
- During battery operation, the POWER
button will work as a POWER ON/OFF
button. The display will be totally off when
the radio is powered off. The display
backlight will be full brightness after radio
power on, and it will turn to dim after a few
seconds.
- It takes 3 hours (approx.) to fully charge the
battery.
- A fully charged unit has up to 10 hours
(approx.) of playback time at 1/2 volume
level.
15
Page 16
Page 17
Using your
DAB/FM Radio
3
Page 18
Using your DAB/FM Radio
Let’s get started
BASIC OPERATION
Powering ON/OFF
After connecting the micro USB adapter to the unit
and the mains socket, the unit will enter Standby
mode.
1. Push the POWER button to switch on the unit.
2. Push the POWER button again to switch the unit
back to Standby mode.
3. Disconnect the power cable of the mains adapter
from the mains socket if you want to switch the
unit off completely.
While using battery power,
1. Push the POWER button to switch on the unit.
2. Push the POWER button again to switch off the
unit.
Key Lock
1. Push the HOLD button (to left side), key lock will
be activated. When press any buttons, display will
show “Keys Locked”.
2. Push the HOLD button to the middle to unlock
the key.
18
Page 19
Using your DAB/FM Radio
Let’s get started
Selecting Modes
Press MODE button repeatedly to switch between
modes (DAB or FM).
Adjusting the Volume
Press the VOL-/+ button to adjust the the volume.
Automatically Setting the Clock
The clock will be updated automatically if you can
receive DAB/FM signal
in your location.
In order to synchronise to the current local time, you
must leave the unit to
receive signals from the DAB/FM station for a period
of time.
Setting the Time and Date
1. Switch on the radio, press and hold MENU/INFO
to display the menu.
2. Press TUN/CH
and then press ENTER to confirm. Press TUN/
CH
buttons to select <Time>, then press
◄ ►
ENTER to confirm.
3. Press the TUN/CH
option below:
buttons to select <System>,
◄ ►
buttons to select the
◄ ►
19
Page 20
Using your DAB/FM Radio
Let’s get started
Set time/date
Press TUN/CH
date, then press ENTER
to confirm.
Auto update
Press TUN/CH
Any, DAB, FM or No
Update then press ENTER to confirm.
Set time format
Press TUN/CH
Set 12 hour, then press ENTER to confirm.
Set date format
Press TUN/CH
or DD-MM-YYYY, then
press ENTER to confirm.
4. Press MENU/INFO to exit the menu.
20
buttons to adjust the time and
◄ ►
buttons to select Update from
◄ ►
buttons to select Set 24 hour or
◄ ►
buttons to select MM-DD-YYYY
◄ ►
Page 21
Using your DAB/FM Radio
Let’s get started
DAB OPERATION
If the unit switched on for the first time, the unit will
automatically enter into the DAB mode and perform
auto scan. During the scan the display will show
“Scanning…” together with a slide bar that indicates
the progress of the scan and the number of stations
that have been found so far.
Once the scan has finished, the unit will select the
first alphanumerically found station. To explore the
found stations, press TUN/CH
to confirm selection.
and then ENTER
◄ ►
00:00
Scanning… 0
Full Scan
The full scan will search for the entire DAB Band III
channels. After the scan
has finished, the first alphanumerically found station
will be automatically
selected.
1. To activate full scan, press the SCAN button. The
display will show “Scanning…” and a progressing
slide bar.
21
Page 22
Using your DAB/FM Radio
Let’s get started
2. Or, press and hold MENU/INFO then TUN/CH
to select <Full scan>. Press the ENTER button to
►
confirm. The display will show “Scanning…” and a
progressing slide bar.
3. All the stations that have been found will be stored
automatically. To explore and listen to the found
stations, press TUN/CH
confirm selection.
and then ENTER to
◄ ►
◄
00:00
DAB
<Full scan >
Full scan will not replace the DAB stations
in memory. If you want to remove all the
previously scanned stations, factory reset is
required.
Manual Tuning
Manual tuning can help add stations that were missed
by full scan.
1. Press and hold MENU/INFO and then TUN/
CH
to select <Manual tune>. Press ENTER to
◄ ►
confirm.
22
Page 23
Using your DAB/FM Radio
Let’s get started
2. Press TUN/CH
channels, which are numbered from 5A to 13F.
3. Press ENTER to select the station that you would
like to listen to.
to scroll through the DAB
◄ ►
00:00
DAB
<Manual tune >
Presetting Stations
You can store up to 10 of your favourite DAB stations
to the memory. This
will enable you to access your favourite stations
quickly and easily.
1. To store a preset, you must first be listening to the
station that you would like to save. Press and hold
PRESET. The display will show “<Save to P#>”.
2. Press TUN/CH
station number and then press ENTER to confirm.
3. The station will be stored and the screen will show
“Preset # stored”.
to select the desired preset
◄ ►
23
Page 24
Using your DAB/FM Radio
Let’s get started
Recalling a Preset Station
1. Once you have saved a station, you can recall it by
pressing the PRESET button.
2. Press TUN/CH
station number.
3. Press ENTER to confirm.
4. If you choose a preset station number that has not
been allocated a station, “Preset Empty” will be
displayed.
to select the desired preset
◄ ►
00:00
Preset Recall
<6: BBC Radio 6>
Prune Invalid
You may remove all unavailable stations from the list.
1. During DAB mode, press and hold MENU/INFO
button, and then press TUN/CH
select <Prune>. Press ENTER to confirm.
2. Press TUN/CH
confirm delete. Or select <NO> to cancel.
24
buttons to select <YES> to
◄ ►
◄ ►
buttons to
Page 25
Using your DAB/FM Radio
Let’s get started
DAB Display Modes
Every time you press MENU/INFO, the display will
show the following display modes.
Scrolling Text
This is a scrolling message giving real-time
information, e.g. song titles, news headlines, etc.
Signal Strength
This shows a slide bar to indicate the signal strength,
the stronger the signal, the longer the bar will be from
left to right.
Programme Type
This describes the “style” or “genre” of the programme
that is being broadcast.
Ensemble
This display the name of the multiplex that contains
the station you are listening to. A multiplex is a
collection of radio stations that are bundled and
transmitted on one frequency. There are national and
local multiplexes. Local ones contain stations that are
specific to that area.
25
Page 26
Using your DAB/FM Radio
Let’s get started
Frequency
This display the frequency of
the present station, such as
“11C 220.352MHz”.
Scrolling Text
Signal Strength
Signal Error
This displays a number
showing the error rate. If the
number is 0, it means the signal
received is error free and the
signal strength is strong. If the
error rate is high, it is
recommended to re-orient
the aerial or re-position the unit.
Bitrate and Codec
This shows the radio mode
and the digital audio bit rate
being received.
Battery Status
The display will show the battery
status/capacity.
26
Programme Type
Ensemble
Frequency
Signal Error
Bitrate and Codec
Battery Status
Time
Date
Page 27
Using your DAB/FM Radio
Let’s get started
Time
This display the current time provided automatically
by the broadcaster.
Date
This display the current date provided automatically
by the broadcaster.
FM OPERATION
Switching from DAB to FM Mode
To switch the unit from DAB to FM mode, press
MODE once.
Auto Scan
1. To activate auto scan, press the SCAN button. The
display will show “Scanning…” and a progressing
slide bar.
2. Or, press and hold TUN/CH
forward or reverse scanning. “Scanning…” will
show on the display. Once a station has been
found, the scanning will stop automatically.
◄ ►
to start the
27
Page 28
Using your DAB/FM Radio
Let’s get started
Manual Scan
To search for FM stations manually, press TUN/CH
repeatedly until your desired frequency is reached.
►
With FM radio, it may be necessary to fine
tune each station by pressing TUN/CH
repeatedly. Each press will adjust the
►
frequency by 0.05 MHz. If reception is still
poor, adjust the position of the aerial or try
moving the radio to another location.
Scan Setting
This is a scanning option to scan all stations, or just
scan stations with strong signal.
1. Press and hold MENU/INFO and then press TUN/
CH
to select <Scan setting>. Press ENTER to
◄ ►
confirm.
2. Press TUN/CH
<Strong stations only>. Press ENTER to confirm.
28
to select <All stations> or
◄ ►
◄
◄
Page 29
Using your DAB/FM Radio
Let’s get started
Presetting Stations
You can store up to 10 of your favourite FM stations
to the memory. This will
enable you to access your favourite stations quickly
and easily.
1. To store a preset, you must first be listening to the
station that you would like to save. Press and hold
PRESET. The display will show “<Save to P#>”.
2. Press TUN/CH
station number and then press ENTER to confirm.
3. The station will be stored and the screen will show
“Preset # Stored”.
Recalling a Stored Station
1. Once you have saved a station, you can recall it
by pressing PRESET.
2. Press TUN/CH
station number
3. Press ENTER to confirm.
4. If you choose a preset station number that has
not been allocated a
station, “Preset Empty” will be displayed.
to select the desired preset
◄ ►
to select the desired preset
◄ ►
29
Page 30
Using your DAB/FM Radio
Let’s get started
FM Display Modes
Every time you press MENU/INFO, the display will
show the following display
modes.
Radio Text
This is a scrolling message information about the
current programme.
Programme Type
This describes the “Style” or “genre” of programme
that is being broadcast.
Frequency
This display the frequency of the present station, such
as “87.50 MHz”.
Audio Info
This displays if the station being received is in mono
or stereo.
Battery Status
The display will show the battery status/capacity.
30
Page 31
Using your DAB/FM Radio
Let’s get started
Time
This displays the current time provided automatically
by the broadcaster.
Date
This displays the current date provided automatically
by the broadcaster.
Radio TextProgramme TypeFrequency
Battery StatusTimeDateAudio Info
SLEEP
1. To set the sleep timer, press and hold MENU/INFO
to enter Menu.
5. When your desired sleep time appears in the
display, release the button and sleep function will
be activated in five seconds. An icon will show on
the top left corner of the display.
6. To see how much sleep time is left, repeat step (1)
to (3).
BACKLIGHT
In mains power mode there are 3 backlight level to
choose.
1. To set the Backlight, press and hold MENU/INFO
to enter Menu.
2. Press TUN/CH
and press ENTER to confirm.
3. Press TUN/CH
<Backlight> and press the ENTER to confirm.
4. Press TUN/CH
Medium/High” and press the ENTER button to
confirm the setting.
5. There is no backlight settings in battery mode.
When any buttons is pressed the display will light
for 10 seconds then dim again.
32
buttons to select <System>
◄ ►
buttons until the display shows
◄ ►
buttons to cycle through “Low/
◄ ►
Page 33
Using your DAB/FM Radio
Let’s get started
LANGUAGE
1. To set the language, press and hold MENU/INFO
to enter Menu.
2. Press TUN/CH
and press ENTER to confirm.
3. Press TUN/CH
and press ENTER to confirm.
4. Press TUN/CH
and press ENTER to confirm.
buttons to select <System>
◄ ►
buttons to select <Language>
◄ ►
buttons to select the language
◄ ►
FACTORY RESET
When you move the unit to another part of the
country, your pre-tuned and stored DAB+/FM stations
may no longer be available and you might need to
reset the unit back to its original factory settings. To
perform a factory reset, please do the following:
1. Press and hold MENU/INFO and then press TUN/
CH
buttons to select <System>. Press ENTER
◄ ►
to confirm.
2. Press TUN/CHReset> and then press ENTER to confirm.
buttons to select <Factory
◄ ►
33
Page 34
Using your DAB/FM Radio
Let’s get started
3. The display will show “Factory Reset?”. Press TUN/
CH
buttons to select <Yes>.
◄ ►
4. Press ENTER button to start the system reset,
“Restarting…” will show on the display. After the
reset is completed, the unit will then start scanning
for DAB channels immediately.
00:00
System
<Factory Reset >
After the factory reset, all the tuned stations,
DAB & FM preset stations will be erased.
00:00
Factory Reset ?
<Yes> No
SOFTWARE VERSION
1. Press and hold MENU/INFO and then press TUN/
CH
buttons to select <System>. Press ENTER
◄ ►
to confirm.
2. Press TUN/CH
press ENTER to confirm.
3. The software version will show on the display.
4. Press MENU/INFO to exit.
34
to select <SW version>, then
◄ ►
Page 35
Using your DAB/FM Radio
Let’s get started
USING EARPHONES
You can connect your earphones by plugging into
the earphone socket at the right side of the unit. Turn
down the volume before connecting earphones.
Slowly raise the volume with the earphones on until
you reach your desired level.
Long-term exposure to loud music may cause
hearing damage. It is best to avoid extreme
volume when using earphones, especially for
extended periods of time.
RESET FUNCTION
In case the unit does not respond when pressing any
buttons, it may freeze up during use. Use a hard thin
tool to press the RESET button that at the bottom of
the unit to shutdown the unit. Push the Power button
to switch on the unit again.
35
Page 36
Page 37
Other information
4
Page 38
Other information
Helpful technical information
SPECIFICATION
Mains Supply 5V 1A
Built in Battery 3.7V 1350mAh
Speaker Output
Power
Radio
Frequency
Dimensionapprox.
Net Weightapprox. 160g
38
1.2W RMS
FM 87.5 – 108 MHz
DAB 174 – 240 MHz
129mm (W) x 28mm (D) x 62mm (H)
Page 39
Page 40
Product support
5
Page 41
Product support
Help is always at hand
Help and assistance
If you require any technical guidance or find that
your DAB/FM Digital Radio is not operating as
intended, a simple solution can often be found in
the Troubleshooting section of these instructions or
online at www.argos-support.co.uk
If you still require further assistance, call one of our
experts on 0345 604 0105. To help give us give you
a fast and efficient service please have the following
information ready:
Model Ref.
Serial number
You can find these on the rating plate - a small
information panel (usually a sticker or metal plate) on
the rear of your product.
41
Page 42
Product support
Help is always at hand
Date of purchase
This will be shown on your receipt
Local call rates applies*
Line open 8am-7pm Monday to Saturday and 10am4pm Sunday
*Calls to Argos enquiry lines may attract a charge and
set up fee from residential lines depending on your
call plan/tariff. Mobile and other providers costs may
vary, see www.bt.com/pricing for details.
For security and training purposes, telephone calls to
and from customer service centres may be recorded
and monitored. Calls from Republic of Ireland will
attract international call charges.
42
Page 43
Product support
Help is always at hand
This appliance complies with the following
EEC directives: 2006/95/EEC Low voltage
directive, 2004/108/EMC directive
Disposal
This symbol on the product or in the
instructions means that your electrical
and electronic equipment should be
disposed at the end of its life separately
from your household waste. There are
separate collection systems for recycling
in the EU. For more information, please
contact the local authority or your retailer
where you purchased the product.
43
Page 44
Product support
Help is always at hand
Notes for battery disposal
The batteries used with this product contain
chemicals that are harmful to the environment.
To preserve our environment, dispose of
used batteries according to your local laws or
regulations.
Do not dispose of batteries with normal
household waste.
For more information, please contact the local
authority or your retailer where you purchased
the product.
All trademarks are the property of their respective
owners and all rights are acknowledged.
44
Page 45
Product support
Help is always at hand
Call us now and activate your 12 month guarantee
Thank you for choosing Bush. Your new product
is guaranteed against faults and breakdowns for 12
months. Don’t forget to register it with us today so
we can provide you with our best possible after-sales
service and useful updates.
www.bushregistration.co.uk
FREEPHONE*
0800 597 8548
Lines are open 8am - 8pm, 365 days a year. *Calls
This product is guaranteed for twelve months from the
date of original purchase. Any defect that arises due to
faulty materials or workmanship will be repaired free of
charge (or if applicable the product will be replaced or
the purchase price refunded) where possible during this
period by the dealer from who your purchased the unit.
may be recorded and monitored.
Your Bush Guarantee
45
Page 46
Product support
Help is always at hand
The guarantee is subject to the following provisions:
The guarantee does not
cover accidental damage,
misuse, cabinet parts,
knobs or consumable
items.
The product must be
correctly installed and
operated in accordance
with the instructions
contained in the manual.
It must be used solely
for domestic purposes.
The guarantee will be
rendered invalid if the
product is
46
re-sold or has been
damaged by inexpert
repair.
Specifications are subject
to change without notice.
Bush disclaim any liability
for loss or damage arising
from the breakdown of
the product.
This guarantee is in
addition to and does not
diminish your statutory or
legal rights.
Page 47
Product support
Help is always at hand
Important Data Protection Information
If you provide us with
information about
another person, you
confirm that they have
appointed you to act
for them, to consent
to the processing of
their personal data
including sensitive
personal data and that
you have informed them
of our identity and the
purposes (as set out in the
Important Data Privacy
notice displayed overleaf)
for which their personal
data will be processed.
You are entitled to ask for
a copy of the information
we hold about you (for
which we may charge
a small fee) and to have
any inaccuracies in your
information corrected.
For quality control and
training purposes, we may
monitor or record your
communications with us.
If your personal details
change, if you change
your mind about any
of your marketing
preferences or if you
have any queries about
how we use your
information, please let
us know by contacting
our Data Protection
Officer, Domestic &
General, Leicester House
17 Leicester Street,
Bedworth, Warwickshire
CV12 8JP.