Bush DVD9791BUK User Manual

DVD9791BUK

Table Of Contents

1
2
2
3
5

10

11
13
17

21
26
28

Safety Precaution

Package

Main Features

Overview of Unit A/B

System Connection

The Remote Control unit A

The Remote Control unit B

Basic operation

System Setup

SD/MMC/USB Main Menu

Specification

Troubleshooting

Safety Precaution

Warning: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.

1) Please read the instruction manual carefully and follow all the requirements

of safe operation to operate the device.

2) Do not use this unit near water. Do not place over the unit any container

with liquid inside.

3) Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

4) Unplug this unit during lightning storms or when unused for long time.

5) About Cleaning: Unplug the system, use only wet cloth to clean. Do not use

liquid detergent or aerosol.

6) Only use accessories specified by the manufacturer.

7) Refer all servicing to qualified service personnel, servicing is required when

the unit has been damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the unit,
exposed to moisture, does not operate normally. Don't try to repair the
machine by yourself because of the danger of high voltage and electric
shock.

8) Do not use irregular shaped discs such as heart or star-shaped discs as

they may cause the unit to malfunction.

1

2

2

2

2

1

1

2

1

2

Package

Main Features

High brightness color 9" LCD screen

Compatible with disc of DVD, MP3, XVID , CD, JPEG, etc.

Built-in stereo speaker

Support PAL or NTSC system

Support speed forward/backward, repeat function

Zoom in/out function

2

9'' LCD DVD Players

Remote Control With Battery

Audio/Video Cable

Audio/Video Output Cable

AC/DC Power Adapter

Cigarette Lighter Adapter

User Manual

Earphone

Straps

Overview of Unit A/B

Overview of Unit A

3

1 2

3

4

5

678

9

10

11

12

AV OUT

A UNIT

14

13

1. Open knob

2. Power ON/OFF switch

3. SETUP button

4. MUTE button

5.

6. OK button

7. PLAY/PAUSE button

8. STOP button

9. DC IN 9-12V

10. AV OUT

11. Earphone jack

12. Volume knob

13. Rating label position

14. Bracket

( )/ ( )/ ( )/ ( )

Overview of Unit B

4

1 2

3

4

5

678

9

10

11

12

13

14

AV IN/OUT

B UNIT

15 16

1. Open knob

2. Power ON/OFF switch

3. SETUP button

4. MODE button

5.

6. OK button

7. PLAY/PAUSE button

8. STOP button

9. DC IN 9-12V

10. AV IN/OUT

11. Earphone jack

12. Volume knob

13. SD card slot

14. USB Port

15. Rating label position

16. Bracket

( )/ ( )/ ( )/ ( )

Plug one end of the AC/DC power adaptor into the DC IN 9-12V jack on the
right of the unit, then plug the other end into the AC power receptacle. Please
refer to the following illustration.

If using car cigarette lighter adaptor to connect to the power:
Plug one end of the cigarette lighter adaptor into the DC IN 9-12V jack on the
unit, plug the other end into the car cigarette lighter socket. See illustration
below.

Note

Car cigarette lighter adaptor is available to use only when the car cigarette

lighter with DC 12V negative grounding.

The mains plug is used as the disconnect device, the disconnect device

should remain readily operable.

Car cigar ette lighter

Unit A

Unit A

Unit B

Unit B

Powering and installation

System Connection

5

AV IN/OUT

AV IN/OUT

AV OUT

AV OUT

Connecting To Unit A/B

1. Connect unit A and unit B with AV cable.

2. Connect the unit to power by AC/DC adapter or cigarette light adapter.

3. Turn on these two units, insert a disc into the disc compartment of the main
unit A, press the IN/OUT key on remote control B to change Unit B to AV IN
mode, then you can see the same image on both units.
Please refer to the illustration below.

Note:
Unit B has AV IN and AV OUT function. Unit A only has AV OUT function. So
unit A can be connected to unit B and TV, unit B can only be connected to TV.

Unit A

Unit B

6

AV IN/OUT

AV OUT

7

1. Fit the straps to the DVD Player / Monitor as required.

In Car Installation

Please install the units with strap A (long)
and strap B (short) together.

Turn the player around so the backs are facing you.

A

B

Strap A through the unit from right clip first, then
across the loop in Strap B, last Strap A through
the unit left clip.

A

B

8

2. Fitting the straps to the headrest.

a. Fitting the straps to the headrest.

Fit the straps around the headrest
and engage the 2 trident clips.
Ensure clips are securely fastened.

Pull the straps tight using the
adjustment.
Tuck the loose ends into the strap
tidy.

NOTE:

Be sure to complete the installation then use DVD9791BUK in the car.
For DVD9791BUK installation is recommended that the DVD Player is on the

LEFT headrest, to ensure a neat cable run to the monitor, as shown below: