Bush DLED49287UHDCNTDFVP Instruction manual
*OTUSVDUJPONBOVBM
-&%6)%'71
$POUBDU
XXXBSHPTTVQQPSUDPVL
)FMQMJOF
Contents
Safety information
1
SOME DO’S AND DON’TS ON THE SAFE USE OF
EQUIPMENT 4
Markings on the Product 8
Getting to know your TV
2
Ready? Let’s begin... 10
Accessories Included 10
Features 10
Antenna Connection 11
Connect Power 11
Switching On/Off 11
Remote Control 12
Connections
3
Connections 14
First Time Installation 15
Standard features
4
TV Control & Operation 18
Standby Notifications 18
Using the Channel List 18
Advanced features
5
Media Playback via USB Input 20
Custom Boot Up Logo 20
CEC and CEC RC Passthrough 20
System Audio Control 21
E-Manual (if available) 21
To Program Your SKY Remote For Your TV 21
Configuring Parental Settings 21
Electronic Programme Guide (EPG) 21
Timeline Schedule 21
List Schedule(*) 22
Now/Next Schedule 22
Event Options 22
Integrated Catch-Up Services 22
Teletext Services 22
Software Upgrade 22
Software upgrade search via user interface 23
3 AM search and upgrade mode 23
Firmware Update via the Internet 23
Manual Download (Pull) 23
Automatic Download (Push) 23
TV Menu Contents 24
Connectivity 28
Internet Portal 31
Freeview Play Platform 32
Integrated Catch-Up Services 32
Accessing Freeview Play catch-up TV services 32
Internet Browser 33
Smart Centre 33
Other information
6
Environmental Information 38
Specification 39
Product fiche 39
PC Input Typical Display Modes 40
AV and HDMI Signal Compatibility 41
Supported Video File Formats for USB Mode 42
Supported Picture File Formats for USB Mode 42
Supported Audio File Formats for USB Mode 43
Supported Subtitle File Formats for USB Mode 45
Supported DVI Resolutions 46
DVB-T functionality information 46
Internet Portal functionality information 47
Product support
7
Troubleshooting & Tips 50
Help and assistance 51
Disposal information 52
Your Bush Guarantee 53
1
Safety information
1
Safety information
Important - Please read these instructions fully before
installing or operating
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
Don’t operate your TV in extreme
ambient conditions as this may cause
damage to your TV.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sucient magnitude
to constitute a risk of electric shock of persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Note: Follow the on screen instructions for operating the
related features.
Preparation
Place the device on a solid even surface. For ventilation,
leave a free space of at least 10 cm all around the set. To
prevent any fault and unsafe situations, do not place any
objects on top of the set. Use this device in moderate
climates.
Operation temperature and operation humidity:
0ºC up to 40ºC, 85% rel. humidity max. (not blocking
ventilation openings).
Intended Use
This device is used to receive and display TV programmmes.
The dierent connection options make an additional
expansion of the reception and display sources possible
(various external devices). This device is only suitable
for dry interior use. This appliance is intended solely
for private domestic use and may not be used for
industrial and commercial purposes. We exclude liability
in principle, if the device is not used as intended, or
unauthorized modifications have been made. To operate
your TV in extreme ambient conditions may cause the
damage of the device.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instructions concerning use of the appliance by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with
the appliance.
Children may not recognize dangers. The swallowing
of batteries can be fatal. Keep batteries always out of
reach of small children. If a battery is swallowed, seek
immediate medical attention. Keep the packaging films
out of reach of children, there is a risk of suocation.
Use this TV set at an altitude of less than 2000 meters
above the sea level, in dry locations and in regions with
moderate or tropical climates.
To avoid danger of suocation, keep plastic bags out of
the reach of the babies, children and domestic animals.
Carefully attach the stand to the TV. If the stand is provided
with screws, tighten the screws firmly to prevent the TV
from tilting. Do not over-tighten the screws and mount
the stand rubbers properly.
SOME DO’S AND DON’TS ON THE SAFE
USE OF EQUIPMENT
Please read the following recommended safety
precautions carefully for your safety.
This equipment has been designed and manufactured to
meet international safety standards but, like any electrical
equipment, care must be taken if you are to obtain the
best results and safety is to be assured.
DO read the operating instructions before you attempt
to use the equipment.
DO ensure that all electrical connections (including
the mains plug, extension leads and inter-connections
between the pieces of equipment) are properly made
and in accordance with the manufacturer’s instructions.
Switch o and withdraw the mains plug before making
or changing connections.
DO consult your dealer if you are ever in doubt about
the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
DO route the mains lead so that it is not likely to be walked
on, crushed, chafed, or subjected to excessive wear and
tear or heat.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Safety information4
Safety information
Important - Please read these instructions fully before
installing or operating
DON’T remove any fixed cover as this may expose
dangerous voltages.
DON’T obstruct the ventilation openings of the
equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and shorten
the life of the equipment.
DON’T allow electrical equipment to be exposed to
dripping or splashing, or objects filled with liquids, such
as vases, to be placed on the equipment.
DON’T place hot objects or naked flame sources such as
lighted candles or nightlights on, or close to equipment.
High temperatures can melt plastic and lead to fires.
DON’T use makeshift stands and NEVER fix legs with
wood screws - to ensure complete safety always fit the
manufacturer’s approved stand or legs with the fixings
provided according to the instructions.
DON’T listen to headphones at high volume, as such use
can permanently damage your hearing.
DON’T leave equipment switched on when it is
unattended unless it is specifically stated that it is designed
for unattended operation or has a stand-by mode. Switch
o using the switch, on the equipment and make sure that
your family know how to do this. Special arrangements
may need to be made for infirm or handicapped people.
DON’T continue to operate the equipment if you are in
any doubt about it working normally, or if it is damaged
in any way - switch o, withdraw the mains plug and
consult your dealer.
ABOVE ALL
NEVER let anyone especially children push
anything into holes, slots or any other opening
in the case - this could result in a fatal electrical
shock.
NEVER guess or take chances with electrical
equipment of any kind.
It is better to be safe than sorry!
Power source
ŔThe TV should be operated only from a 220-240 V AC,
50 Hz outlet.
WARNING: Do not leave your TV in standby or
operating mode when you leave your house.
Positioning the TV
ŔFor ventilation, please leave a clear space of at least
10cm all around the TV.
ŔDo not block the ventilation openings.
ŔDo not place the TV on sloping or unstable surfaces,
the TV may tip over.
ŔTo prevent damage to the TV, do not place any objects
on top of the TV.
Power cord and plug
ŔDo not place the set, a piece of furniture, etc. on the
power cord (mains lead) or pinch the cord. Handle the
power cord by the plug. Do not pull the plug by holding
its neck, as this could result in damage to the plug. Do
not unplug the appliance by pulling from the power
cord and never touch the power cord with wet hands as
this could cause a short circuit or electric shock. Never
make a knot in the cord or tie it with other cords. The
power cords should be placed in such a way that they
are not likely to be stepped on. A damaged power cord
can cause fire or give you an electric shock. When it is
damaged and needs to be replaced, it should be done
by qualified personnel.
ŔThis TV receiver is supplied with a moulded mains plug.
The mains plug must not be cut o, as it may contain
a special radio interference filter, the removal of which
could lead to impaired performance. If you wish to
extend the lead, obtain an appropriate safety approved
extension lead or consult your dealer.
ŔObserve the manufacturers instructions when
connecting extension leads to the set. Check the fuse
rating on the new plug; this should be fitted with a 5
Amp fuse which conforms to either ASTA or BSI (BS1362)
approvals, these are easily identifiable by either the
or
symbols. If you are in any doubt about the
installation of an extension lead, please consult a
competent electrician.
ASA
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Safety information 5
Safety information
Important - Please read these instructions fully before
installing or operating
Moisture and Water
ŔDo not use this TV in a humid or damp place (avoid
bathrooms, the sink in the kitchen, and near the washing
machine).
ŔDo not expose this TV to rain or water.
ŔDo not place objects filled with liquids, such as flower
vases, on top of the TV. Avoid from dripping or splashing.
ŔIf any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualified personnel before
operating it any further.
Ventilation
ŔThe slots and openings on the TV set are intended for
ventilation and to ensure reliable operation.
ŔTo prevent overheating, these openings must not be
blocked or covered in anyway.
Heat sources and Flames
ŔDo not expose the TV to direct sunlight or other heat
sources.
ŔThe TV should not be placed near to open flames and
sources of intense heat such as an electric heater.
ŔEnsure that no open flame sources, such as lit
candles, are placed on top of the TV.
Headphone Volume
ŔExcessive sound pressure from earphones and
headphones can cause hearing loss, please
take care.
Wall Mounting (optional)
ŔTo prevent injury, this TV must be securely attached to the
wall in accordance with the installation instructions (if the
option is available).
LCD Screen
ŔOccasionally, a few non-active pixels may appear on
the screen as a fixed blue, green or red point. Please
note that this does not aect the performance of your
product.
ŔTake care not to scratch the screen with fingernails or
other hard objects.
Cleaning
ŔBefore cleaning, unplug the TV from the wall socket.
ŔDo not use liquid or aerosol cleaners. Only use a soft,
dry cloth.
Batteries
WARNING: Incorrect installation of batteries may
cause battery leakage and corrosion, resulting in damage
to the remote control.
ŔDo not mix old and new batteries, or batteries of dierent
types.
ŔDo not dispose of batteries in a fire.
ŔDo not dispose of batteries with normal
household waste, take to a local recycling
centre.
CAUTION: Insert the batteries / rechargeable
batteries in the correct polarity. Don´t try to recharge
non rechargeable batteries and under no circumstances
throw them into fire. Danger of explosion. Do not use
unequal batteries (old and new, Alkaline and carbon, etc.)
simultaneously. If you will not use the device for a long
time, remove the batteries and store the device in a dry
and dust free place. Improper use of batteries may cause
an explosion or leakage. If the batteries have leaked, use
gloves and clean the appliance thoroughly with a dry
cloth! Batteries should not be exposed to heat, such as
sunshine, fire or the like.
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specified by the manufacturer or have the
same specifications as the original one. Unauthorised
substitutions may result in fire, electrical shock or other
hazards.
Taking out of service and storing
Unplug the TV from the mains and pack the TV in an
appropriate cardboard box. Remove the batteries from
the remote control and pack the remote control with
the TV set.
NOTE: The TV set should be stored in a dry and dustfree room.
Connection to a Television Distribution
System (Cable TV etc.) from Tuner
Device connected to the protective earthing of the
building installation through the mains connection or
through other apparatus with a connection to protective
earthing-and to a television distribution system using
coaxial cable, may in some circumstances create a fire
hazard.
Connection to a cable distribution system has therefore to
be provided through a device providing electrical isolation
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Safety information6
Safety information
Important - Please read these instructions fully before
installing or operating
below a certain frequency range (galvanic isolator, see
EN 60728-11).
CAUTION
Do not put your fingers in the middle between the TV
and stand, especially when you carry the TV, as they may
be injured.
WARNING
Do not ingest the battery, Chemical Burn Hazard
This product or the accessories supplied with the
product may contain a coin/button cell battery. If the
coin/button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can lead to
death.
Keep new and used batteries away from children.
If the battery compartment does not close securely,
stop using the product and keep it away from children.
If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
WARNING
Never place a television set in unstable or inclined
locations. A television set may fall, causing serious
personal injury or death. Many injuries, particularly to
children, can be avoided by taking simple precautions
such as;
ŔUsing cabinets or stands recommended by the
manufacturer of the television set.
ŔOnly using furniture that can safely support the
television set.
ŔEnsuring the television set is not overhanging the edge
of the supporting furniture.
ŔNot placing the television set on tall furniture (for
example, cupboards or bookcases) without anchoring
both the furniture and the television set to a suitable
support.
ŔNot standing the television set on cloth or other
materials placed between the television and supporting
furniture.
ŔEducating children about the dangers of climbing
on furniture to reach the television set or its controls.
If your existing television set is being retained and
relocated, the same considerations as above should
be applied.
WALL MOUNTING WARNINGS
ŔRead the instructions before mounting your TV on
the wall.
ŔThe wall mount kit is optional. You can obtain from
your local dealer, if not supplied with your TV.
ŔDo not install the TV on a ceiling or on an inclined wall.
ŔUse the specified wall mounting screws and other
accessories.
ŔTighten the wall mounting screws firmly to prevent the
TV from fall. Do not over-tighten the screws.
WARNING
Apparatus connected to the protective earthing of the
building installation through the MAINS connection or
through other apparatus with a connection to protective
earthing – and to a television distribution system using
coaxial cable, may in some circumstances create a fire
hazard. Connection to a television distribution system
has therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11)
Symbols in this Instruction Book
The following symbols are used in the Instruction Book
as a marker for restrictions and precautions and safety
instructions. Note such information for security reasons.
WARNING
If you do not pay attention to such a marked warning, it
can cause serious injury or death. Note these warnings
strictly, in order to ensure a safe operation.
CAUTION
Such a precaution is marked, you should take up or
note, to avoid injury or property damage. Note these
instructions strictly, in order to ensure a safe operation.
IMPORTANT
Warnings on the appliance and restrictions are displayed
like this. Read this information strictly in order to operate
the system correctly and avoid damage.
NOTE
Information about the operation and additional
explanations are marked like this. To be aware of such
information is recommended to ensure that the functions
can be used optimally.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Safety information 7
Safety information
Important - Please read these instructions fully before
installing or operating
Markings on the Product
The following symbols are used on the product as a
marker for restrictions and precautions and safety
instructions. Each explanation shall be considered where
the product bears related marking only. Note such
information for security reasons.
Class II Equipment: This appliance is designed in
such a way that it does not require a safety
connection to electrical earth.
Class II Equipment With Functional Earthing: This
appliance is designed in such a way that it does not
require a safety connection to electrical earth, the
earth connection is used for functional purposes.
Protective Earth Connection: The marked terminal
is intended for connection of the protective earthing
conductor associated with the supply wiring.
Hazardous Live Terminal: The marked terminal(s)
is/are hazardous live under normal operating
conditions.
Caution, See Operating Instructions: The marked
area(s) contain(s) user replaceable coin or button
cell batteries.
Class 1 Laser Product: This product
contains Class 1 laser source that is
safe under reasonably foreseeable
conditions of operation.
The illustrations and the OSD in this operation manual
are for explanation purposes and may vary slightly from
the actual operations.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Safety information8
Getting to know your TV
2
Getting to know your TV
You’ll be up and running in no time
Ready? Let’s begin...
Please read these instructions carefully. They contain
important information which will help you get the best
from your TV and ensure safe and correct installation
and operation.
If you require any further assistance, our technical experts
are happy to help. For full details, refer to the product
support section at the end of these instructions.
Accessories Included
ŔRemote Control
ŔBatteries: 2 x AAA
ŔInstruction Book
ŔQuick Start Guide
Features
ŔTV supports Ultra HD (Ultra High Definition - also known
as 4K) which provides resolution of 3840 x 2160 (4K:2K).
It equals 4 times the resolution of Full HD TV by doubling
the pixel count of the Full HD TV both horizontally and
vertically. Ultra HD contents are supported from HDMI,
USB inputs and over DVB-T2 and DVB-S2 broadcasts.
ŔRemote controlled colour TV
ŔFully integrated digital terrestrial TV (DVB-T-T2)
ŔHDMI inputs to connect other devices with HDMI
sockets
ŔUSB input
ŔOSD menu system
ŔScart socket for external devices (such as DVD Players,
PVR, video games, etc.)
ŔStereo sound system
ŔTeletext
ŔHeadphone connection
ŔAutomatic programming system
ŔManual tuning
ŔAutomatic power down after up to eight hours.
ŔSleep timer
ŔChild lock
ŔAutomatic sound mute when no transmission.
ŔNTSC playback
ŔAVL (Automatic Volume Limiting)
ŔPLL (Frequency Search)
ŔPC input
ŔGame Mode (Optional)
ŔPicture o function
ŔEthernet (LAN) for Internet connectivity and service
Ŕ802.11 a/b/g/n built in WIFI Support
10
ŔAudio Video Sharing
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Getting to know your TV
Getting to know your TV
You’ll be up and running in no time
Antenna Connection
Connect the aerial plug to the AERIAL INPUT (ANT) socket
located on the back of the TV.
Inserting the Batteries into the Remote
Remove the back cover to reveal the battery compartment.
Insert two size AAA batteries. Make sure the (+) and (-)
signs match (observe correct polarity). Do not mix old
and new batteries. Replace only with same or equivalent
type. Place the cover back on.
Connect Power
IMPORTANT: The TV set is designed to operate on 220-
240V AC, 50 Hz socket. After unpacking, allow the TV
set to reach the ambient room temperature before you
connect the set to the mains. Plug the power cable to
the mains socket outlet.
Switching On/O
To Switch the TV On
Connect the power cord to a power source such as a
wall socket (220-240V AC, 50 Hz).
To switch on the TV from standby mode either:
Press the Standby button, Programme +/- or a numeric
button on the remote control.
Press the centre of the joystick on the TV in or push it up/
down until the TV comes on from standby.
To Switch the TV O
Press the Standby button on the remote control or press
the centre of the joystick on the TV in and hold it down
for a few seconds, the TV will switch into standby mode.
To power down the TV completely, unplug the power
cord from the mains socket.
Note: When the TV is switched into standby mode, the
standby LED can blink to indicate that features such as
Standby Search, Over Air Download or Timer is active.
The LED can also blink when you switch on the TV from
standby mode.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Getting to know your TV
11
Getting to know your TV
You’ll be up and running in no time
Remote Control
1. Standby: Switches On / O the TV
2. TV: Displays channel list / Switches to TV Source
3. Volume +/-
4. Menu: Displays TV menu
5. OK: Confirms user selections, holds the page (in TXT mode),
views channel list (DTV mode)
6. Back/Return: Returns to previous screen, opens index page
(in TXT mode)
7. Internet: Opens the portal page, where you can reach many
web based applications
8. YouTube: Launches the YouTube application.
9. Freeview Play: Connects to the Freeview Play platform
where you can access available catch-up TV services
10. Coloured Buttons: Follow the on-screen instructions for
coloured button functions
11. Language: Switches among sound modes (analogue TV),
displays and changes audio/subtitle language (digital TV,
where available)
12. Rapid reverse: Moves frames backwards in media such as
movies
13. Pause: Pauses the media being played
14. No function
15. Play: Starts to play selected media
16. Stop: Stops the media being played
17. Rapid advance: Moves frames forward in media such as
movies
18. Subtitles: Turns subtitles on and o (where available)
19. Screen: Changes the aspect ratio of the screen
20. Text: Displays teletext (where available), press again to
superimpose the teletext over a normal broadcast picture
(mix)
21. Media browser: Opens the media browsing screen
22. EPG (Electronic programme guide): Displays the electronic
programme guide
23. Exit: Closes and exits from displayed menus or returns to
previous screen
24. Directional buttons: Helps navigate menus, content etc.
and displays the subpages in TXT mode when pressed Right
or Left
25. Quick Menu: Displays a list of menus for quick access
26. Info: Displays information about on-screen content, shows
hidden information (reveal - in TXT mode)
27. Programme +/-
28. Mute: Completely turns o the volume of the TV
29. Source: Shows all available broadcast and content sources
30. Numeric buttons: Switches the channel, enters a number
or a letter in the text box on the screen.
31. Netflix: Launches the Netflix application, if this feature is
supported by your TV
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
12
Getting to know your TV
Connections
3
Connections
Bringing it all together
Connections
Connector Type Cables Device
Scart
Connection
(back)
YPBPR
AUDIO IN
SPDIF
BACK AV
HEADPHONE
LAN
YPbPr Video
(bottom&side)
(Optical Out)
(Audio/Video)
Connection
(back)
HDMI
Connection
VGA
Connection
(bottom)
PC/YPbPr/
Back AV
Audio
Connection
(back)
SPDIF
Connection
(bottom)
Back AV
Connection
(back)
Headphone
Connection
(side)
USB
Connection
(back&side)
CI
Connection
(side)
Ethernet
Connection
(bottom)
Subwoofer
Connection
(back)
YPbPr Connection Cable
YPbPr/PC Audio Cable
Audio Video Cable
LAN / Ethernet Cable
CAM
module
NOTE: When connecting a
device via the YPbPr or Back AV
input, you must use the connection
cables to enable connection. See
the illustrations on the left side. | To
enable PC/YPbPr audio, you will need
to use the Back Audio inputs with
a YPbPr/PC audio cable for audio
connection. | If an external device
is connected via the SCART socket,
the TV will automatically switch to AV
mode.| When receiving DTV channels
(Mpeg4 H.264) or while in Media
Browser mode, output will not be
available via the scart socket. | When
using the wall mounting kit (available
from third party in the market, if not
supplied), we recommend that you
plug all your cables into the back of
the TV before mounting on the wall. |
Insert or remove the CI module only
when the TV is SWITCHED OFF. You
should refer to the module instruction
manual for details of the settings. | The
USB 2.0 inputs on the back side and on
the left side of the TV support devices
up to 500mA. Connecting devices
that have current value above 500mA
may damage your TV. If available,
for the optional USB 3.0 input on
the left side of the TV, which will be
positioned above the other USB input,
this limit value is 1A. | By connecting
an HDMI cable to your TV, you have
to use only a shielded (high grade)
HDMI cable with ferrites to guarantee
a sucient immunity and emission
against parasitic frequency radiation.
And make sure to use a High-Speed
HDMI cable that can transmit high
definition signals, such as 4K contents,
for trouble-free transmission.
If you want to connect a device
to the TV, make sure that both
the TV and the device are turned o
before making any connection. After
the connection is done, you can turn
on the units and use them.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Connections14
Getting to know your TV
You’ll be up and running in no time
First Time Installation
When turned on for the first time, the language selection
screen is displayed. Select the desired language and
press OK.
On the next screen, set your preferences using the
directional buttons.
Note: Depending on the Country selection you may be
asked to set and confirm a PIN at this point. The selected
PIN cannot be 0000. You have to enter it if you are asked
to enter a PIN for any menu operation later.
About Selecting Broadcast Type
Digital Aerial: If Digital Aerial broadcast search option
is turned on, the TV will search for digital terrestrial
broadcasts after other initial settings are completed.
Analogue: If Analogue broadcast search option is turned
on, the TV will search for analogue broadcasts after other
initial settings are completed.
Additionally you can set a broadcast type as your favourite
one. Priority will be given to the selected broadcast type
during the search process and the channels of it will be
listed on the top of the Channel List. When finished, press
OK to continue.
You can activate Store Mode option at this point.
This option will configure your TV’s settings for store
environment and depending on the TV model being
used, the supported features of it may be displayed on
the top of the screen as an info banner. This option is
intended only for store use. It is recommended to select
Home Mode for home use. This option will be available
in System>Settings>More menu and can be turned o/
on later.
Press OK button on the remote control to continue and
the Network/Internet Settings menu will be displayed,
if you confirm the previously displayed message asking
whether you want to do the network settings. Please refer
to Connectivity section to configure a wired or a wireless
connection. After the settings are completed press OK
button to continue. To skip to the next step without doing
anything select No and press the OK button when the
message is displayed asking whether you want to do the
network settings.
On the next screen you need to agree to the terms and
conditions of Freeview Play to make use of the related
services. Scroll the page to read the entire text using the
up/down directional buttons or Programme +/- buttons.
Highlight Yes and press OK on the remote to confirm and
proceed. Highlight No and press OK to proceed without
confirmation.
After the initial settings are completed TV will start to
search for available broadcasts of the selected broadcast
types.
After all the available stations are stored, scan results will
be displayed. Press OK to continue. The Edit Channel List
menu will be displayed next. You can edit the channel list
according to your preferences or press the Menu button
to quit and watch TV.
While the search continues a message may appear, asking
whether you want to sort channels according to the
LCN(*). Select Yes and press OK to confirm.
(*)
LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel number sequence (if available).
Note: Do not turn o the TV while initializing first time
installation. Note that, some options may not be available
depending on the country selection.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Getting to know your TV
15
Loading...