Bush DLED48265FHD Quick Start Guide

Quick Start Guide

Helpline No: 0345 6040105

Insert the batteries into the Remote Control

1

Lift the cover on the back of the remote gently. Insert two
AAA batteries. Make sure the (+) and (-) signs match
(observe correct polarity). Place the cover back on.

DLED48287FHD

Connect the antenna to your TV

2

Connect the TV to the mains socket

3

To switch the TV on

4

1. Connect the power cord to the 220-240V AC, 50 Hz.

Then the standby LED lights up.

To switch on the TV from standby mode either:

2. Press the “ ” button, P/CH+ / P/CH- or a numeric button

on the remote control or;

3. Press the control switch located on the left side of the

TV.

By either method the TV will switch on.

REAR OF THE TV

UK plug

insert plug...

...and switch on

HDMI input

50345148

5

PLEASE ENSURE BOTH UNITS ARE SWITCHED OFF BEFORE
CONNECTING. Use a HDMI to HDMI cable to connect the two units together.
To select the HDMI input, press the “SOURCE” button on the remote control.
Each time it is pressed the on-screen menu confirms your selection.

Start Auto Setup procedure

6

Important note: Ensure that the aerial is connected and a Common Interface
module is not inserted before switching on the TV for the first time installation.

Do not insert a common interface module during the search process.

1. When the TV is turned on for the first time the language screen will
be displayed. Select the desired language using Up or Down
button and press OK to save and continue.

2. After setting the language, First Time Installation screen wil be
displayed. Use Up/Down and Left/Right buttons to set the
desired options.

3. “Do you want to start automatic search?" message will be

displayed on the screen. Select YES and press OK to continue.
The TV will search for digital terrestrial broadcasts. After all the

available stations are stored, Channel List will be displayed on the
screen. If you like to sort channels, according to the LCN(*), please
select “Yes” and then press OK. (*) LCN is the Logical Channel
Number system that organizes available broadcasts in
accordance with a recognizable channel sequence.

the device

SOURCESOURCE

To HDMI connection on