Bush BMS330BT User Manual

CONTENT

ACCESSORIES ................................................................................................................................1

WARNING ........................................................................................................................................2

PANELS INSTRUCTION ................................................................................................................4

REMOTE CONTROL ......................................................................................................................5

CONNECTION WITH TV ...............................................................................................................6

CONNECTION WITH AMPLIFIER ...............................................................................................7

SYSTEM CONNECTION ...............................................................................................................8

BASIC OPERATION

CD RIPPING OPERATION............................................................................................................13

USB/BLUETOOTH OPERATION.................................................................................................16

RADIO OPERATION......................................................................................................................17

MENU SETUP ................................................................................................................................18

SPECIFICATION ............................................................................................................................23

TROUBLE SHOOTING .................................................................................................................24

.......................................................................................................................9

IMPORTANT SAFETY INSTRUCTION

1. Read these Instructions - All the safety and operating instructions should be read before this product is operated.

2. Keep these Instructions - The safety and operating instructions should be retained for future reference.

3. Heed all Warnings-All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow all instructions - All operating and use instructions should be followed.

5. Do not use this apparatus near water- The appliance should not be used near water or moisture - for example, in a wet basement or near a swimming pool, and the like.

6. Clean only with a damp cloth.

7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat Registers, stoves, or other apparatus (including amplifiers)that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding -type plug. A polarized plug has two blades with one wider than the other. A grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the manu facturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug the apparatus during lightning storms or when unused for long periods of time.

14. Refer all serving to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture.

15. Please keep the unit in a good ventilation environment.

16. These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

17. WARNING: The MAINS PLUG is used as disconnect device, the disconnect device shall remain readily operable.

18. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

19.

dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

- Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.

- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance in the literature accompanying the appliance.

20.

21. The batteries in remote control shall not be exposed or excessive heat such as sunshine, fire or the like.

22. The apparatus shall not be exposed to dripping or slashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

23. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

24. WARNING: The battery shall not be exposed to excessive heat such as sunshine, fire or the like.

25.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

ERP II note (Energy Related Products)

Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam of laser.

Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU.

-This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulatd

This product complies with the European Commission on the Eco-design Directive and its implementing Regulations- Energy related products. 15 minutes (approx.) later without any input ( expect in FM mode), the system will automatically enter standby mode. Follow up the instruction manual to assume the function operation.

WARNING

Please read and understand all the warnings provided below, as well as and those makred on the unit. This unit has been designed and manufactured to assure personal safety.

Only use power source that is specified in the User Manual or on the system.

Avoid placing the unit in direct or sunshine or near a heat source.

Do not bend or pull the power cable excessively, and do not apply pressure to it by standing on it.

ACCESSORIES

DVD BT FM

LINE IN

USB

6 7

9 0

REP.AB CD RIP.

REPEA

MENU TITLE

DISPLA

SUB.

L/R/LANG

SETUP

ENTER

CH+

VOL

CH-

SEARCH SAVE

MO/ST

BASS+

TREBLE+

BASS- TREBLE-

ZOOM

OK VOL- OK VOL+

OK ON/OFF

Keep the unit and power plug away from water.

Never open the cover and avoid dropping anything into the unit, such as coins, hairpins and needles for example.

Unplug the unit from the main power outlet when you do not use it for a long time.

Part 1: Remote Control X1

Part 2: User Manual X1 Part 4: Six-headed Audio&

Part 3: FM Antenna X1

Video Lotus Wire X1

PANELS INSTRUCTION

DISPLAY SCREEN

INDICATOR LIGHT

STANDBY

PLAY/PAUSE

FUNCTION

FAST REWIND

EARPHONE

Y, Pb/Cb, Pr/Cr

COMPONENT OUTPUT

VIDEO OUTPUT

FM ANTENNA

COAXIAL OUTPUT

L/R AUDIO OUTPUT

IR SENSOR

EJECT

BMS330BT

VOLUME KNOB

STOP TONE DSP

FAST FORWARD NEXT

LED LIGHT

EARPHONE

DISC TRAY

USB PORT MIC R/L AUX IN

MINI HI-FI AUDIO SYSTEM MODEL NO.:

BMS330BT

70W

~220-240V 50Hz

N14119

Made in China

OPTICAL OUTPUT

POWER SWITCH

SPEAKERS(8Ω)

~220-240V 50Hz

L/R SPEAKERS

POWER SUPPLY

REMOTE CONTROL

NOTE:

1. Turn on the player and have batteries installed in the remote control, put the emitter against the sensor of player for remote control.

2. The distance of remote control should not exceed 7 meters, or else, it will be invalid.

3. If the sensor or remote controller emitter is stuck with foreign matters, it may result in the malfunction in signal reception or not at all.

4. The remote control function may be affected under the strong interference signals, such as power supply and other strong high-frequency signals.

STANDBY

DVD

USB

A-B REPEAT

REPEAT

TITLE

SETUP

PLAY/PAUSE/ENTER

DIRECTION

STOP

NEXT/CH+

PREVIOUS/CH-

SAVE

BASS+/-

ZOOM

OK ON/OFF

DVD BT FM

USB

9 0

REPEAT

REP.AB

MENU TITLE

SETUP

ENTER

CH+

CH-

SEARCH SAVE

BASS+

BASS-

ZOOM

OK ON/OFF

OK VOL- OK VOL+

SUB. DISPLAY

AUX

CD RIP.

L/R/LANG

VOL

MO/ST

TREBLE+

TREBLE-

EJECT FM AUX

NUMBER

TIME/ FREQUENC Y

CD RIPPING

DISPLAY

LANG/R/L SUBTITLE

MUTE FAST FORWARD

VOLUME+/-

FAST REWIND

MONO/STEREO

TREBLE+/-

OK VOLUME+/-

CONNECTION WITH TV

1. If your TV-set has AV terminal, connect this unit to TV-set with A/V cables, and set TV-set to be AV status after confirming the connection is correct. (Figure 1)

2. If your TV-set has chromatism output terminal, please use three connection cables to connect the player and TV-set, this connection offers a more vivid image. (Figure 2)

Audio R

Audio L

Pb/Cb Pr/Cr

Video Input

AC Power

SPEAKERS(8Ω)

~220-240V 50Hz

Note:

1. Before connecting the player to the TV-set, turn off and unplug both the units.

2. You may adjust the corresponding system according to your TV system while watching various discs.

3. If there are multiple connections between video player and TV, please select one and unplug others so as not to affect the quality of images and sound.

4. Do not switch on and off or press power switch frequently, switching on and off each time must have an interval of 3 seconds.

5. Do not connect the digital optical or coaxial output jack of this player with the analogue signal input terminal for reception.

CONNECTION WITH AMPLIFIER

Setup of Digital Audio Output

Connect the optical and coaxial output jack to the amplifier.

MINI HI-FI AUDIO SYSTEM MODEL NO.:

BMS330BT

70W

~220-240V 50Hz

N14119

Made in China

SPEAKERS(8Ω)

~220-240V 50Hz

( Select one of the two digital

Video connecting cable

Coaxial output

Optical output

connecting wires)

Left channel

Connected to video input

Dolby Amplifier

Right channel

+ 19 hidden pages

Bush BMS330BT User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual