Bush BGN1700A+ Instruction manual
Built-Under Larder
Installation & User Instructions – Please keep for future reference
AB170
BUCL6082Installation & User Instructions - Please keep for future reference
Important – Please read these instructions fully before installing or using
These instructions contain important information that will help you get the best from your
appliance, ensuring safe and correct installation, use and maintenance.
If you need help or have damaged or missing parts, call the Customer Helpline on 0845 600 4632
Issue 1 - 01/06/12
Contents
Presentation and Description of the Product 3
Safety Information 4
Before Using the Appliance 5
Switching on the appliance 6
Parts 6
Installation 7-13
Dimensions for installation 7
Installing top bracket 7
Height adjustment 8
Position the larder 9
Securing the larder 9
Fitting the cabinet door 10
Installing the plinth 12
Reversing the door 13
User Instructions 14
Thermostat setting 14
If your larder is not cold enough 14
Reversing the door 14
Cleaning and Maintenance 15
General 15
Defrosting the refrigerator 15
Replacing the light bulb 15
Trouble Shooting 16
Technical Specifi cations 17
Tips for Saving Energy 18
Product code
AB170
BUCL6082
2 Customer Helpline 0845 600 4632
Presentation and Description of Product
6
1
2
3
5
4
1. Larder shelf
2. Crisper cover/safety glass
3. Crisper
4. Thermostat button
5. Bottom shelf
6. Butter shelf
Customer Helpline 0845 600 4632 3
Safety Information
Important
Important - Please read these instructions fully before installation
IMPORTANT - Please read this booklet before
installing and switching on this appliance. The
manufacturer assumes no responsibility for
incorrect installation and usage as described in this
booklet.
IMPORTANT - If the supply cord is damaged it
must be replaced by the manufacturer, service
agent or appointed person.
WARNING - keep ventilation openings (in
appliance enclosure or building) clear from
obstruction.
WARNING - Do not use electrical appliances in
the larder.
WARNING - If this appliance is to replace an old
larder with a lock, break or remove the lock to
protect children from locking themselves inside.
WARNING - Old larders contain insulation gases
and refrigerant, which must be disposed of
properly. Entrust the disposal of a scrap unit to
your local waste disposal service and contact your
local authority or dealer if you have any questions.
Please ensure that the larder pipe is not damaged
prior to collection by an appropriate waste disposal
service.
WARNING - Do not allow children to play with the
appliance. Children must never sit in the drawers or
hang from the door.
WARNING - This appliance is not intended for
use by people (including children) with reduced
physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for their
safety. Children should be supervised to ensure
that they do not play with the appliance.
WARNING - Do not defrost the appliance with
other electrical devices (i.e. hair dryer) or other
artifi cial means.
WARNING - Do not touch the cooling surfaces
while the appliance is in operation, especially with
wet hands, as skin may stick to cold surfaces.
CAUTION - If the model contains R600a (see
name plate - coolant is isobutane) then it is
environmentally friendly but also combustible.
When transporting and installing the unit, care must
be taken to ensure that none of the refrigeration
circuit components become damaged. In the event
of damage, avoid naked fl ames or ignition sources
and ventilate the room in which the unit is placed
for a few minutes.
CAUTION - Do not use mechanical devices or
other artifi cial means to accelerate the defrosting
process.
CAUTION - Do not damage the refrigerant circuit.
WARNING - Do not use adapters or shunts,
which could cause overheating or burning.
WARNING - Do not connect old, warped power
supply cables.
WARNING - Do not twist and bend the cables,
and keep them away from hot surfaces.
WARNING - Do not connect the power supply
with wet hands.
WARNING - After installation, make sure that
the power cable is not trapped underneath the
appliance.
4 Customer Helpline 0845 600 4632
Before Using the Appliance
Recommendations
Switching on the appliance
• Before switching on, place the appliance in an
upright position and wait at least three hours
without moving the appliance. This will give
the freezing circuit time to settle and operate
effi ciently.
• Clean the appliance thoroughly, especially
the interior, before use (see Cleaning and
Maintenance).
• Installation of the appliance and electrical
connections must be carried out by a qualifi ed
technician in accordance with the installation
manual and local regulations.
• The procedure for installation the appliance into
the kitchen unit is given in the installation section
of this manual. This product is only intended to
be used in proper kitchen units.
• The appliance must be connected with a
properly installed fused socket. Power supply
(AC) and voltage at the operating point must
comply with the details on the name plate of
the appliance (the name plate is located on the
inside-left of the appliance).
• Insert the plug into a socket with an effi cient
ground connection. If the socket has no
ground contact or the plug does not match, we
suggest you to call an authorised electrician for
assistance.
• The manufacturer is not responsible for failure to
complete the ground connection as described in
this booklet.
• There can be an odour when you fi rst switch
on the appliance. It will disappear after the
appliance starts to cool.
• The plug must be accessible following
installation.
Customer Helpline 0845 600 4632 5
Parts
Please check you have all of the attaching parts listed below
Installation
Installation kit contents
A. Wood screw x17
C. Door Bottom Fixings x2
Tools required
E. Screw
B. Door hang
D. Hang cover
F. Top bracket
Spirit level
Setsquare
6 Customer Helpline 0845 600 4632
Screwdriver
Wrench
Loading...