Bush A322D, A322, A Series, A3 Instruction Manual

Download

Customer helpline: 0845 604 0105

19 /22 Digital LCD Television INSTRUCTION MANUAL

P. 0 2

P.12

P.04

P.05

01 Safety Notice

02 About your LCD

03 Getting Started

04 Basic Operation

P.06 P.07 P.08

P.09 P.09 P.09 P.10 P.10 P.11 P.12 P.12

P.12

P.13

Safety Notice

Front Panel Control Connection Remote Control Installing Batteries

Connection Instructions External equipment connections Antenna Connection VGA Input YPbPr Input S-VIDEO Input SCART Input CI Card Input HDMI Input USB Input

Basic Operating Instructions Turn on the LCD-TV Inputs selection V+/VMute Sound Mode Select the TV Channel Picture Mode Q.VIEW Sleep/ARC/Zoom Menu Operations Picture Menu Options

Contents

P.13

P.14

P.14 P.14 P.14

P.14

P.15 P.16

P.13 P.13

P.14

P.17 P.18 P.19 P.21

P.22

Sound Menu Options Function Menu Options Lock Menu Options. Lock Menu Options Continued Tuning Menu Options Tuning Menu Options Continued Time Menu Options Time Menu Options Continued

P.23 P.25

P.26

P. 0 3

05 Using the features

06 Reference Sections

P.31

P.37 P.38

P.46

TELE TEXT Basic Playback Advanced Playback Special Function Playback DVD System Setup Playable Discs Disc Protection and DVD Characteristics

Streaming Media Playing System

Troubleshooting Guide Specifications

P.47

P.32

P.30

P.29

P.27

P.36

P. 0 4

Safety Notice

To prevent fire or electric shocks please read the instruction before installing, using and cleaning the television.

Please read all the instructions before operation; Please keep the manual for future reference ; Do not use any accessories that are not recommended by the manufacturer: Before operation, make sure the operating voltage of this unit is corresponds

with your house electrical supply;

Do not place the unit on unstable or in dusty and humid places; Never put the unit in direct sunlight or near heat sources; Allow enough space for proper ventilation;

Please keep water away from the LCD-TV . If water comes in to contact with the LCD-TV, disconnect the power cord from the power source, then wipe the set with a dry soft cloth;

Do not remove the back cover. If servicing is required , please refer to

customer helpline.

P. 0 5

Front Panel Control

Control Panel Function

1. Standby switch

2. SOURCE Call the Input Source menu/Confirm button when operation menu.

3. MENU Press to select the main menu

4. VOL- Volume down / Left orientation to adjust the item in the OSD VOL+ Volume up / Right orientation to adjust the item/Press to enter

5. CH- TV channel down / to select the item in the menu CH+ TV channel up / to select the item in the menu

6. Power indicator

7. Remote Sensor

(The figure above and the description of the button may be different, all picture in this manual is just for reference, please see the actual set.)

SOURCE MENU VOL- VOL+ CH- CH+ STANDBY

02 About your LCD

02 About your LCD TV

ANT IN COAXIAL

S-VIDEO

VGA IN

PC AUDIO IN

Common Interface

R-AUDIO-L

TV SCART

HDMI USB

Connection

USB HDMI TV SCART YPbPr Common Interface S-VIDEO AUDIO IN VGA IN

PC AUDIO IN

ANT IN

Connect to HDMI output of other equipment

Connect a component video/audiodevice to these jacks

Component/S-Video Audio Input

Earphone port COAXIAL

Connect to the VGA 15PIN analog output connector of the Pc display card for PC

display purpose

Connect the PC outpu tconnec tor from a PC to the audio

Connect cable or antenna signals to the TV, either direc-tly or through your

cable box.

P. 0 6

02 About your LCD TV

Just take one TV with DVD for example,

please see the real)

DVD insert

STOP

PLAY/PAUSE

OPEN/CLOSE

(Please refer to actual product of the DVD slot and buttons)

Remote Control

When using the remote control, aim it

towards the remote sensor on the TV

Stand By

DVD Menu

DVD open/close

Picture Mode

Sound Mode

Call Screen Display

Sleep button

DTV Audio/NICAM/DVD Audio

Aspect Ratio Control button(except for DVD&USB )

Channel list button

Subtitle button

Program Number Channel selection

Source Exchange

Q.VIEW

V+/V- :Volume selection

P+/P-:Channel selection

Mute

Menu button

GUIDE Button (only for DTV)

Favourite button

OK button

Cursor Mover Button

Back button (only for USB)

Exit Screen Display

REPEAT (only for USB)/CANCEL button

Zoom(only for DVD &USB)/Teletext index(only for TV)

Play/pause button(only for DVD &USB)

STOP(only for DVD &USB)

FAST REVERSE(only for DVD &USB)

FAST FORWARD(only for DVD &USB)

PREVIOUS(only for DVD &USB)

NEXT(only for DVD &USB)

DVD SET UP/ TEXT

DVD TITLE/TELETEXT MIX

DVD SEARCH/TELETEXT SUBCODE

DVD 10+/TELETEXT HOLD

DVD PROGRAM/TELETEXT REVEAL

DVD A-B REPEAT/TELETEXT SIZE

DVD ANGLE/TELETEXT TIME

DVD CALL/TELETEXT MODE

Buttons on the remote control

NOTE:Red button GREEN button blue button and yellow button are fast text button in analog signal .Function button in DVBT (just reference the OSD)

P. 0 7

SCREEN

STOP

Installing Batteries

1.Open the cover of the battery compartment at the back of the remote control.

2.Insert two AAA alkaline batteries in the compartment. (plus and minus poles to respective mark)

3.Replace the cover of the battery compartment.

Precautions

Make sure that there is no obstacle between the remote controller and television set.

As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect.

Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller.

Make sure that two AAA 1.5V alkaline batteries are loaded. The batteries must be of the same type. The batteries must be located properly. The batteries are not rechargeable. If your TV is to be stored for a period of time, remove the batteries from the remote control.

P. 0 8

02 About your LCD TV

Connection Instructions

External Equipment Connections

Antenna Connection

- Antenna or Cable Service with a Cable Box Connections

- For optimum picture quality, adjust antenna direction if needed.

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

wall antenna socket

VHF antenna UHF antenna

outdoor antenna

Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)

Be careful not to bend the bronze wire when connecting the antenna.

To improve picture quality in a poor signal area, purchase and install a signal amplifier.

If the antenna needs to be split for two TV s, install a 2-Way Signal Splitter in the connections.

If the antenna is not installed properly,

contact your dealer for assistance.

NOTE: All cables shown are just for example.

RF coaxial wire (75 ohm)

ANT IN

P. 0 9

03 Getting Started

Connection Instructions

You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied).

VGA Input

Connection and use steps:

1.Read the user guide supplied with your computer and ensure that it has a VGA connector;

2.Make sure that the power of the LCD

-TV and the PC are off;

3.Connect a D type 15-pin VGA interface cable ( not supplied ) to the VGA video interface connector on the PC. Then connect the other end to the PC video interface connector on the back of the LCD-TV.Tighten the screws on the VGA connectors once they are firmly connected, connect the audio cable(not supplied)to the audio input on the back of your LCD-TV;

4.Turn on the power of the LCD-TV first , and then turn on the power of the PC;

5.Set the video input mode of the LCD-TV to PC;

6.Check the image on your TV. There may be noise associated with the

resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card cannot be changed,change the PC graphic card or consult the manufacturer of the PC graphic card.

Frame frequency (Hz)Line frequency (Khz)

VGA

SVGA

XGA

640*480 31.5KHz 60Hz

800*600 37.9KHz 60Hz

1024*768 48.4KHz 60Hz

Mode Resolution

Note: All above listed are subject to VESA Criteria.

YPbPr Input

How to connect

Connect the DVD video outputs (Y, PB, PR) to the Component(Y, Pb, Pr) in socket on the TV and connect the DVD audio outputs to the AUDIO jacks on the TV, as shown in the figure. NOTE: If your DVD player does not have component video output, use S-Video.

How to use

1. Turn on the DVD player, insert a DVD.

2. Set the mode of the LCD-TV to Component.

VGA IN

P. 1 0

03 Getting Started

Connection Instructions

(If connected to S-Video,select the S-Video external input source.)

3. Refer the DVD player's manual for operating instructions.

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

S-VIDEO Input

Connection and use steps:

1.Read the user guide supplied with your AV devices and ensure that it has S-Video connectors;

2.Make sure that the power of the LCD-TV and the AV device are switched off;

.Turn on the power of the LCD-TV first ; and then turn on the power of the AV device;

4.Set the video input mode of the LCD-TV to S-Video mode .

Connection Option 1

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

Connection Option 2

1. Connect the audio and S-Video cables from the VCR's output jacks to the TV input jacks, as shown in the figure.

2. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.)

- To avoid picture noise (interference), leave an adequate distance between the VCR and TV

VCR

P. 1 1

Connection Instructions

SCART Input

1.Connect the scart lead from the external device(DVD players, settop boxes or game consoles, to the TV SCART socket.

2.Set the mode of the LCD-TV to SCART.

3. Press Play button on external equipment and it should appear on the screen.

HDMI

HDMI Input

HDMI Devices

Connect the cable from the HDMI devices to the TV HDMI, as shown in the figure.

How to use

1. Set the mode of the LCD-TV to HDMI.

2. Operate the corresponding external equipment. Refer to external equipment operating guide.

SCART

External equipment

HDMI Devices

CI Card Input

The common interface (CI) slot is designed to accept the Conditional Access (CA) Module and Smart card in order to view the pay TV programmes and additional services. Contact your Common Interface service provider to get more information about the modules and subscription. Please noted that CA modules and smart cards are neither supplied nor optional accessories from us. Warning: switch off your TV before any module is inserted in the Common Interface slot. Insert the CAM correctly, then Smart Card to the CI slot that is located at the side of the TV.

USB Input

USB

USB Devices

Connect the USB device to the USB IN jack on the side of TV(or on the back of TV).

How to use

After connecting the USB IN jack, you use the USB function. The USB function is illustrated in the page 38-42.

P. 1 2

03 Getting Started

Basic Operating Instructions

Turn on the LCD-TV

When the POWER(STANDBY) button on the remote control is pressed and the LCD-

TV is turned on, the indicator light on the front of the LCD-TV changes from red to

green. When the LCD-TV is turned off using the POWER(STANDBY) button, the

LCD-TVwill go into standby mode and the indicator light turns red.

You can also turn on the TV from standby mode by pressing the digits(1-9) or P-/P+.

V+/V-

Press the V+/V- button to increase/decrease the volume and there will be display on the bottom of the screen.

The display will appear on the screen

when the TV is turned on for the first

time:

Press to select the language you

want, then press to select the

Auto Search and OK to enter the submenu:

press to select the country you are in,

then press to move to the following

item and to select Start , then press

OK to confirm.

All channels will be stored after the

searching.

Inputs selection

Press SOURCE button to display the Source menu. Press button to select the inputs you need and the TV will turn to the source automatically in 3 seconds or press OK to confirm.

Installation Guide

Language English

Auto Search

Please select country first Then select Start to update info.

Country selection UK

Start Cancel

EXIT

DTV TV SCART Component PC HDMI S-Video USB DVD

Source

EXIT

P. 1 3

04 Basic Operation

Select the TV Channel

You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the P+/P- keys on the remote control or on the TV set to make a selection.

Picture Mode

Press P.MODE button on the remote control for menu display . For desired mode as follows: Standard Mild Personal Fresh

Q.VIEW

1 S 2

uppose the TV set is in channel 8 just now and in channel 18 now .

If you want to return to the last watched program in channel 8, you can simply press

the

Q.VIEW button.

If you want to return to channel 18, press the button again. Through this function,

you can easily change between the channel you are watching and the channel you watched just now.

Sleep

Press SLEEP button to set the sleep timer among Off/10min/20min/30min/60min/ 90min/120min/180min/240min.

Sound Mode

Press S.MODE button on the remote control for menu display . For desired mode as follows: Standard Music Theatre Voice Personal

Zoom/SCREEN

ZOOM key is not only available in Picture and Movie which from USB part,but also available in DVD part.

In other sources, press SCREEN to select the picture with different aspect ratio.

P. 1 4

Mute

1.Press the MUTE button to mute the sound temporarily. A mute icon appears on the screen.

2.Press the MUTE button again or V+ to restore the sound. The mute icon disappears.

04 Basic Operation

Menu Operations

1. Press MENU button to display the main menu, and to select the main menu .

2. Press to scroll through the options

3. Press buttons to make changes to the parameters

4. Press MENU to exit the menu step by step

5. Press the EXIT button to exit the menu

PICTURE MENU

TUNING MENU

EXIT

PICTURE

Video Mode Personal Contrast Brightness Colour Sharpness Tint

50 50

50 50 0

FUNCTION MENU

EXIT

FUNCTION

Language English Subtitle Language English Display Mode Auto Blue Screen Off Software update Off Carry out system update V1.1

EXIT

TUNING

Auto Search DTV Manual Search ATV Manual Search Tuning Program Guide CI Information

LOCK MENU

LOCK

Change Password Menu Lock Off Program Set Off Program No . 1 Source Lock Child Lock Off

EXIT

TIME

Clock -- -- -- -Off Time Off On Time Off Sleep Off Time Zone London GMT

TIME MENU

SOUND MENU

EXIT

SOUND

Audio Language English Audio Mode Personal Treble Bass Balance AVL Off

50 50 0

P. 1 5

Menu Operations

3.Press button to increase and decrease the level to match your preference .

4. Repeat step 2 and step 3 until desired picture quality has been achieved .

Functions:

Video Mode: Press to set the picture mode .

Contrast : Used to set the contrast balance of the picture.

Brightness : Used to set the brightness level of the picture.

Colour : Press to adjust the colour saturation of the picture.

Sharpness : By increasing the level, it will show cleaner and clearer images and by decreasing the level, it will make picture smoother.

Tint(Only available in NTSC): Set the colour tone of the picture.

Colour Temperature : Press to select the colour temperature from Normal/Cool/ Warm .

Noise Reduction: Adjust the quality of the picture by selecting Off,Low, Middle,High.

PC Adjust (can be adjust only in PC mode and there is PC signal): Press OK button to enter the submenu. Press to adjust the value.

Picture Menu Options

Picture quality can be adjusted for any input separately .

The picture quality on the screen can be adjusted as follows:

1. Press MENU button and until the picture menu appears on the screen.

2. Press button to enter the picture menu and go up and down to select the desired option .

NOTE: Using your remote control to navigate in the on-screen menus. The on-screen menus shown in this manual may be different from those on your TV. These are example to illustrate your TVs operation.

EXIT

PICTURE

Auto Sync H.Position V.Position Size Phase

50 50

P. 1 6

04 Basic Operation

Menu Operations

2. Press button to enter the sound menu and up and down to select the desired option .

3.Press button to increase and decrease the level to match your preference .

4. Repeat step 2 and step 3 until desired sound quality has been achieved .

Functions :

Audio Language(only available in DTV mode) : Press OK to enter the submenu.

Then press to select the Primary and the Secondary item and press

to select the language you need.

Audio Mode : Press to select among Music/Theatre/Voice/Personal/

Standard.

Treble : Increases or decreases the level of the treble sounds.

Bass : Increases or decreases the level of the bass sounds.

Balance : Adjust the audio output between left and right speakers.

Sound Menu Options

Sound can be adjusted as follows:

1. Press MENU and button until the following menu appears on the screen

EXIT

SOUND

Audio Language English Audio Mode Personal Treble Bass Balance AVL Off

50 50 0

Auto Sync: Adjust the picture location frequency and phase parameters automatically in PC.

H.Position: Picture horizontal adjust.

V.Position: Picture vertical position adjust.

Size: Adjust the size of the LCD to match the PC input source.

Phase: Removes any horizontal distortion and clears or sharpness the displayed characters.

P. 1 7

Menu Operations

Function Menu Options

1. Press MENU button and until the following menu appears on the screen.

2. Press button to enter the function menu and go up and down to select the desired option .

3.Press button to increase and decrease the level to match your preference .

4. Repeat step 2 and step 3 until desired function quality has been achieved .

Note: Bass and Treble can be adjust in any audio mode, and if the numerical value is changed, the audio mode will be changed to personal automatically.

AVL: Automatic Volume Limit Control . Reduces the differences in volume level between different broadcasters.

SRS TS XT :Used to turn SRS TS XT the option On or Off.

EXIT

FUNCTION

Language English Subtitle Language English Display Mode Auto Blue Screen Off Software update Off Carry out system update V1.1

Functions:

1. Language: Used to set the language of the on-screen display.

2. Subtitle Language (in DTV mode only): To switch the subtitle languages .

3.Display Mode: Used to set the aspect ratio of the display. Choices include Auto /Full Screen/Zoom1/Zoom2/4:3( Display mode may differ from different inputs. )

4. Blue Screen(in ATV mode only): Used to turn the blue screen option On or Off. With the option on, your TV screen turns blue after 3 seconds without an input signal.

7. Reset : Press OK button to enter the dialogue Are you sure? And press to select Yes, then press OK button to reset the TV setting to factory default.

5.Software update:Used to turn software update the option On or Off.

6.Carry out system update: when new software is detected, the option can be selected, and the process will take several minutes.you can press EXIT button to cancel the upgrade ,then your TV set will be in standby mode. Warning: you must not turn off the TV during the process.

P. 1 8

04 Basic Operation

Menu Operations

Lock Menu Options

1. Press MENU button and until the following menu appears on the screen.

2. Press OK button to display the following menu .

Press the number buttons (0~9) to enter the password.(The initial password is

0000. If you forget your password, you can enter 9443 at any time to access the

lock menu), the lock menu opens.

3.Press button to go up and down to select the desired option .

4.Press button to increase and decrease the level to match your preference .

5.Repeat step 3 and step 4 until desired quality has been achieved .

EXIT

LOCK

Change Password Menu Lock Off Program Set Off Program No . 1 Source Lock Child Lock Off

EXIT

LOCK

Change Password Menu Lock Off Program Set Off Program No . 1 Source Lock Child Lock Off

Please enter password

Functions:

1. Change Password: The password can be changed. Press OK to enter the menu

as follows. Enter the password , if the same password is entered correctly twice,

the old password will be changed.

P. 1 9

Menu Operations

Lock Menu Options Continued

Menu Lock: Press to select Off/Tuning/Main Menu. To set Tuning, the search function will be locked, to set Main Menu, you will need input the password if you want to operation any menu.And you can resume it by setting Off or operate Clear Lock.

Program Set: Used to set up start condition. Press to select among the inputs signals. The setted mode will be entered if the TV is switched off and on again. To set Off, the TV will memory the off-mode.

Program No.(it can only be selected when the Program Set is DTV or TV): Press to select the channel number you want to watch when the TV on again.

Source Lock: Opted to hinder external input modes, such as PC. Press OK to display menu as follows. Press to select the option, and press to set on or off. If you want to cancel some source mode, enter lock menu and set it off or active clear lock.

EXIT

LOCK

Change Password Menu Lock Off Program Set Off Program No . 1 Source Lock Child Lock Off

Please enter password New

Confirm

EXIT

LOCK

DTV TV SCART Component PC HDMI

Off Off Off Off Off Off

Child Lock: Press button to set on or off mode. If lock on mode is set, child lock is inactivated automatically. In such case, buttons on the television is useless and only buttons on remote control can be used, if child lock button(button on the television) is pressed, the screen will display Child Lock. The child lock mode can be resumed by entering Lock set menu, set child lock off or active Clear Lock .

P. 2 0

04 Basic Operation

Menu Operations

Lock Menu Options Continued

EXIT

LOCK

Max Volume 100 Initial Volume Off Channel Lock Clear Lock Parental Lock Off

Max Volume: Press to adjust. If a certain value is set, when volume is being adjusted, the sound value can not exceed that maximum volume value.

Initial Volume: Used to memory the volume you have set when you turn on our TV after turn off it.

Channel Lock: Press OK button to enter the submenu. Press to select the program you want to Lock. The colour of the circle is corresponding with the buttons on the bottom of the remote control. LOCK: to lock the program by pressing the green button and press again to unlock. If a channel is locked, the password is required to be input when you select the channel. (The initial password is 0000) MENU: Exit the screen step by step. EXIT: Press EXIT to exit the screen. OK: Press to select the channel and then press OK button to enter it.

Clear Lock: Press to unlock all set modes, setting all lock options to off, and the maximum volume returns to 100.

Parental Lock: Press to change the setting. To enable setting specific program blocks according to different ages.

P. 2 1

Menu Operations

Note: This menu only appears in TV and DTV mode .

2. Press button to enter the tuning menu and go up and down to select the desired option .

3.Press button to increase and decrease the level to adjust the selected option to your preference .

4. Repeat step 2 and step 3 until desired quality has been achieved .

Tuning Menu Options

1. Press MENU and button until the following menu appears on the screen

EXIT

Auto Search DTV Manual Search ATV Manual Search Tuning Program Guide CI Information

TUNING

Functions:

1. Auto Search: Auto search the TV signal source for available channels, then put them in memory. Press to select the item. Then press OK to confirm. The on-screen menu appears :

Press to select the country and press to select Start and then press OK to confirm, the following will appears on the screen:

EXIT

Auto Search DTV Manual Search ATV Manual Search Tuning Program Guide CI Information

TUNING

Please select country first Then select Start to update info.

Country selection UK

Start Cancel

P. 2 2

04 Basic Operation

Menu Operations

Tuning Menu Options Continued

Channel Tuning

32%... 687.25MHz TV

TV : 12 Programme(s) DTV : 0 Programme(s) Radio : 0 Programme(s)

Press<Menu> to skip. Press<Exit> to exit.

EXIT

You can press EXIT button to enter the submenu and then select Yes to exit the tuning absolutely. The first time you press MENU button the menu will display on the screen, and you can select Yes ,the ATV tuning will be skipped.

The second time you press MENU button the menu will display on the screen, and you can select Yes ,the DTV tuning will be skipped.

Do you want to skip ATV tuning?

Yes No

Do you want to skip DTV tuning?

Yes No

DTV Manual Search: Press OK button to display the submenu. After selecting DTV channel number, press OK again to start to search digital channel and you can press EXIT to exit the search.

ATV Manual Search: Press OK button to display the submenu. Press to select the item and to adjust.

Select System among DK/L/BG/I and set the Current channel. Then select Search and press to start it. Select Fine-Tune and adjust it to improve the picture. After these operation you could select Storage To to set the channel number you want to save. Then press the red button to save the adjustment or press EXIT to exit it.

ATV Manual Search Storage To 3 System DK Current CH 3 Search Fine-Tune Skip Off

Frequency 424.75MHz

EXIT

SAVE

P. 2 3

Menu Operations

Tuning Menu Options Continued

EXIT : Press EXIT button to exit the screen.

INFO: Press to select the program and then press INFO button to display the program information.

Schedule: Press the green button to display the schedule you have set .

DATE: Press yellow button to enter the submenu, then press button to set the date. You can press yellow button again to back to the menu.

Reminder: Press blue button to enter the submenu.

Reminder

10 Mar 2008 14:58

Programme 5 Five Hour 14 Minute 35 Mode Once Date Wed.21 Month Mar

EXIT

Schedule

PROGRAMME GUIDE

10 Mar 2008 15:04

DTV 23 bid-up.tv

DTV

10 Mar 16:30 17:30

5 five The street of San Fra... No Information

16 QVC Gold Workshop With Jan Spanish Funstamps

17 UK Gold

No Information

23 bid-up.tv 25 TCM 26 UK Style

No Information No Information No Information

EXIT

INFO

Schedule

DATE

Reminder

The colour of the circle is corresponding with the buttons on the bottom of the remote control.

Guide( in DTV mode only): Press OK button to enter the submenu.

Tuning Program: Press OK button to enter the submenu. Press to select the program you want to edit. The colour of the circle is corresponding with the buttons on the bottom of the remote control. NAME(only available in ATV ): to rename the analog channel by pressing the red button. Then press to input the characters and press to select the position. FAV: to set the favourite program by pressing green button and press again to cancel. MOVE: press yellow button after you selected a channel (eg.1), then press to move the channel selected to the channel number (eg.9) you want to place. Then the two channel program will be exchanged. SKIP: to skip the channel when press button by pressing the blue button and press again to cancel.

P+/P-

P. 2 4

04 Basic Operation

Menu Operations

Time Menu Options

EXIT

TIME

Clock -- -- -- -Off Time Off On Time Off Sleep Off Time Zone London GMT

1. Press MENU and button until the following menu appears on the screen

2.Press button to enter the time menu and go up and down to select the desired option .

3.Press button to increase and decrease the level to adjust the selected option to your preference .

4. Repeat step 2 and step 3 until desired quality has been achieved ..

Functions:

1.Clock( can not be adjusted in DTV mode): Press OK button to enter the submenu.

Program: Press to select the program you want to watch.

Hour/Minute/Date/Month: Press to set the time.

Mode: Press to select Once/Everyday/Weekly . If Everyday selected, the Date and Month will not be available.

After the operation above, press OK to reminder or press green button to display the schedule you have set.

CI Information: insert a card first and CI Module Inserted will be on the screen. After selecting CI Information, press OK to access the card menu. Refer to the module instruction manual for setting details. When module is removed, the CI Module Removed will be on the screen.

Tuning Menu Options Continued

P. 2 5

Clock -- -- -- -- Off Time Off On Time Sleep Time Zone Lisbon GMT

EXIT

TIME

Repeat Off Hour 00 Minute 00

Menu Operations

Time Menu Options Continued

Press to select Repeat and to select the frequence, then set the hour and minute. (The Hour and Minute can not be available when Repeat is off). If you have finish the adjustment, select Close and then press OK to exit.

On Time: Used to set the time that the TV comes on automatically. And the operation is the same with the Off Time above.

Sleep: Press to set the optional sleep timer.

Time Zone: Press to set the optional time zone.

Clock -- -- -- -- Off Time Off On Time Sleep Time Zone Lisbon GMT

Date 29 Month 5 Year 2008 Hour 18 Minute 32

EXIT

TIME

Press to select the item and to adjust, if you have finish the adjustment, select Close and then press OK to exit.

Off Time: Used to set the time that the TV goes off automatically. Press OK button to enter the submenu as follows:

P. 2 6

04 Basic Operation

ZOOM

TELETEXT

Teletext

Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular program is being broadcast (cable networks, satellite channels, etc.).

Teletext functions

Page up/down Use the P+/P- buttons to browse next or previous page.

Page number entering

Mix mode

Volume adjustment Mute function

To select teletext press the SETUP button on the handset. To switch off teletext, press the button again.

Note all menu functions are not available in teletext mode . Only a few direct button control functions are available in teletext mode, they are:

To select a Teletext page, enter the page number using the numeric key pad on the remote control, or use the P+ or P- buttons, or the coloured Fast text buttons.

To view the TV picture while in Text mode press the button, this will superimpose the Teletext data on top of The TV picture. Press this button again to return to Full Text.

INDEX

Press the INDEX button to go to the index page of teletext.

Note: The teletext buttons could be working even if there is no teletext signal, but there is no teletext display.

INDEX

SET UP

123

456

789

TITLE

P.27

05 Using the features

TELETEXT

Teletext

Language change Pressing the button will change the Teletext characters between Eastern and Western.

Hold Pressing the button will stop the teletext page automatically updating. This feature is very useful where there are several teletext pages or data on the same page number.

Size Pressing the button changes between full screen top half bottom half full screen. This feature is very useful as it magnifies the image making the characters easier to read.

Reveal Pressing the button will reveal hidden text. This feature is used to reveal information such as answers to Teletext on-line interactive puzzles.

Time While in normal TV mode only, pressing the button will display the teletext time in the top right hand corner for a few seconds.

Subcode

Pressing the button by entering its 4-digit number to

enter a secondary page

Fast text coloured buttons Fast text automatically displays the four most commonly used pages that the broadcaster thinks that you may want to choose next. Press the same coloured button on the remote control as the coloured link at the bottom of the teletext page to go directly to that page.

A-B

PROGRAM

ANGLE

D.CALL

10+

REV FWD PREV NEXT

P. 2 8

05 Using the features

Data Side

Basic Playback

Preparations

1. Place the DVD in the disc slot as figure above. The disc will be loaded automatically after one to two seconds, then the DVD player reads the DVD and displays the opening menu. If there is no disc placed on the disc slot in DVD mode, OPEN will display on the screen all the times) There is only one disc size can be loaded in the disc slot . Do not place a disc which is unplayable in this DVD player. Some disc may not playback automatically, you can press button to start playback.

2. Some disc may start playback with a menu, use the cursor button on the remote control to select menu options and press

to start, or press digits to select a menu

PLAY/PAUSE

1. Press to pause playback (still

mode). The sound will be muted during still mode.

2. Press to resume normal

PLAY/PAUSE

Pause playback

1. Press STOP button to go to stop mode, the

TV screen will show the start-up logo. For some disc the player can recall the location where stopped, such as DVDs and audio CDs.

2. Press to resume playback from the location where playback is stopped.

3. Press STOP twice to stop completely.

PLAY/PAUSE

Stop playback

Previous and Next

During playback, press PREV key can go

back to the beginning of this chapter, then each press of this key will skip a chapter till the start of the disc. (note: Disc function may vary depending on disc format) Each press of NEXT key during playback will skip the current chapter and play the next

Fast forward and Fast reverse

1. Press FWD to fast forward through the

disc. Each time the FWD button is pressed, the fast forward motion speed changes. It would cycle through 2X, 4X, 8X, 16X, 32X and normal.

2. Press to resume normal playback.

3. Press REV to fast reverse through the disc. Each time the REV button is pressed, the fast reverse motion speed changes. It would cycle through 2X, 4X, 8X, 16X, 32X and normal.

4. Press to resume normal

PLAY/PAUSE

Basic playback

Basic Playback

Operate the remote to set the TV to DVD status

. Note: The unit do not allow enter DVD mode again(or place a DVD in the disc slot)after it have just left to avoid any damage of the DVD. Wait for 10 seconds to enter again.

Press this button can zoom enlarge or lessen the picture.

Each time pressed the picture times will be change.

ZOOM

When pressing the D.CALL button repeatedly different OSD indicator will be displayed for different types of disc DVD, CD etc

D.CALL

In zoom mode press navigation buttons to move the picture displayed on the screen

P. 2 9

Advanced Playback

PROGRAM

REPEAT

IMPORTANT NOTE:

ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE OPERATION AND DISPLAY ON SCREEN MAY DIFFERENT.

SUBTITLE

A-B

Press A-B to mark the start-point, press again To set an end point to complete setting. The selected section A-B will be repeated immediately. Press the Repeat A-B again to Cancel this function.

Advanced Playback

D.MENU

Press this key to display root menu, select item according to your preference. (This function will work with a DVD having a multi-layer menu.).

ANGLE

When enjoying sports, concert or theatre, press this key to watch same actions in different angles. (Valid for discs possessing this function. Using a disc recorded in multi-angle you can view the scene from different angles, for example, front, side, whole view and exterior scene.)

Press this key can change the audio mode. such as: Audio 1/2: AC 3 2 CH English Audio 2/2: AC 3 5.1 CH English If you play CD disc, press this button can cycle among Mono Left, Mono Right, Mix-Mono and Stereo.

AUDIO

TITLE

With some DVD discs pressing this key will display the title menu. You can then use the digit buttons to select the item you prefer.

Note: When press this button continuously, you must above 3 seconds interval.

Press "SEARCH" once to display the search menu. Use the up/down navigation buttons to select the item you require. Press to confirm (CD press the search button several times to select the item). And then press the numeric buttons or navigation buttons to input the item you require. Press to confirm.

PLAY/PAUSE

Press REPEAT button multiple times to reach desired play mode: DVD Chapter repeat, Title repeat, All repeat CD Single-play current track, Repeat One-repeat current track, Repeat Folder-repeat current folder, Folder-play current folder.

Press to enter program mode,then press the number buttons to select the program number that you want. When finished move the cursor to select START,then press PLAY/PAUSE to confirm and start the program playback.

Press " SUBTITLE ", the screen will display "SUBTI-TLE 01/XX ", "01" indicates the ordinal number of this language; "XX" indicates total number of language; (the number of language depends on disc). This function can select up to 32 languages displayed on screen.

P. 3 0

05 Using the features

Special Function Playback

JPEG DISC PLAYBACK

If this unit is idle for 3 minutes, it will go to sleep mode with screen saver on. In this mode, you can press any key on remote control or on front panel to activate the unit. You can set Screen Saver function to Off in General Setup Page of dvd system setup.

SCREEN SAVER FUNCTION

A JPEG disc contains JPEG (.jpg) format picture information that can be decoded by software and displayed through the video output interface or on the television screen. This function has many applications. For example, you can save files from a scanner or digital camera in the JPEG format,record these on a CD-R disc and present them to an audience through this player. The JPEG formats is a convenient method to store images in a small amount of memory space, and is ideal for archiving information.When a disc containing standard JPEG picture files is inserted into the player, a navigation menu is displayed PLAY/PAUSE automatically. Use the up and down cursor buttons to select a file then press PLAY/PAUSE to begin a slide show. Press PREV or NEXT to move between pictures. Press PLAY/PAUSE to stop on the current picture. Press PLAY/PAUSE to resume normal playback.

P. 3 1

DVD System Setup

General Setup Process

1.Press the SETUP button, the General Setup Page, Preference Page will be displayed in turn.

2.Press CH+/- b to select, the item, then press to enter the submenu.

3.Press CH+/- bu to select then press OK to confirm.

4.Press SETUP repeatedly to exit the set-up menus.

General Setup Page

When using the DVD with the internal TV, select 4 3/LB.

The following information applies only when the DVD output is connected to an external TV.

4 3/PS (PS = Pan and Scan) You may select this if you have a normal aspect ratio (4:3) TV, although the NORMAL/LB (letter box) is a more common choice. In PS mode, wide screen material will fill the screen, but at the expense of chopping off extreme left and right edges of the original film picture. For this feature to work, the disc must be specially coded. Such discs are uncommon. 4 3/LB (LB = Letter Box) You may select this if you have a normal aspect ratio (4:3) TV. Wide screen material will be shown in pure unaltered form, allowing the entire picture area of the original film to be viewed without any side cropping. Black bars will appear above and below the picture. 16 9 You may select this if you have a wide screen (16:9) TV. Back bars may still appear above and below the picture even if using a wide screen TV. This is because some film directors prefer to use ultra wide screen aspect ratios e.g. 2.35:1. This will normally be indicated on the DVD packaging.

ASPECT RATIO DESCRIPTION

..General Setup Page..

Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off

4 3/Ps 4 3/Lb 16 9

PAL AUTO NTSC

..Preference Page..

TV Type Parental Password Default

Auto

..General Setup Page..

4 3/Ps 4 3/Lb 16 9

Tv Display 4:3 LB Angle Mark On OSD Lang ENG Caption On Screen Saver Off Hdcd Off Last Memory On

SET UP

P. 3 2

05 Using the features

DVD System Setup(Continued)

..General Setup Page..

Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off Hdcd Off Last Memory On

Tv Display 4:3 LB Angle Mark On OsdLang ENG Caption On Screen Saver Off Hdcd Off Last Memory On

Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off Hdcd Off Last Memory On

DVD System Setup

General Setup Page

Caption: This function allows you to

display or hide the caption.

Screen Saver: If the screen saver is on,then there will be an animated picture of DVD on the screen whenever the DVD player is idle for more than 3 minutes .

..General Setup Page..

Off

This item allows you to set Angle Mark On or Off.

Angle Mark: Users can select a particular camera angle when playing a DVD which offers multiple angles.

On Off

On Screen Display (OSD) Language: Users can select on-screen display language.

..General Setup Page..

English French German Spanish Italian

..General Setup Page..

(The languages you can select may differ from different countries or models)

..General Setup Page..

Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off Hdcd Off Last Memory On

..General Setup Page..

Off

..General Setup Page..

Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off Hdcd Off Last Memory On

..General Setup Page..

Off

Hdcd: When default setting is off, it will display CD by reading HDCD, for HDCD playback, please choose 1X or 2X.

Last Memory: Memorize the chapter you have just watched. When last memory is on, if you turn on the DVD again after off it will display form the chapter you watched when you turn off the DVD.

Off

P. 3 3

..Preference Page..

DVD System Setup(Continued)

DVD System Setup

The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played.

Preference Page

TV Type: This player

supports different TV output, including AUTO, NTSC, and PAL systems. Usually please set to MULTI.

Parental: The parental control function works in conjunction with the different censorship classes assigned to DVDs. These classes help to control the types of DVDs that the family watches, There are up to 8 censorship classes for DVDs.

Note:

1 To change this setting you must enter your password. (Initial password is 1234) 2 When set to Off, all discs may be viewed.

Password change:

You can change your password by entering 4 digits. Your must confirm the 4 digits before the new password can be accepted.

NOTE:If you forget your password or a password is accidentally set enter 1369 as the password. This will enable you to regain control.

..Preference Page..

2 G 3 Pg 4 Pg 13 5 Pgr 6 R 7 Nc17 8 Adult Off

Old Password

New Password

Confirm Pwd

PAL AUTO NTSC

TV Type Parental Password Default

Auto

TV Type Parental Password Default

Auto

TV Type Parental Password Default

Auto

Change

SET UP

P. 3 4

05 Using the features

DVD System Setup(Continued)

DVD System Setup

Default: Resets all settings

(except password and parental lock status) for this DVD player back to the manufacturers original settings. Press OK to perform the reset.

Note:

Some functions may not be available depending on the type of disc.

..Preference Page..

Reset

TV Type Parental Password Default

Auto

SET UP

P. 3 5

Playable Discs

The following discs can be played:

You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labeled as above. The performance of CD-R or CD-RW disc is depend on the way of disc-burning. In a few cases, their performance may not be very well or even not playable.

Support discs: DVD, CD-R, CD-RW, HDCD, JPEG, CD+G, Kodak CD , W MA.

P. 3 6

05 Using the features

Compare DVD disc with other discs:

DVD LD

Encode method

Digital/MPEG

Analog

Capacity

133 minutes

242 minutes

266 minutes

484 minutes

Playing Time

Single-side 60 minutes double-side

120 minutes

12cm

Disc diameter

30cm/20cm

Horizontal resolution

More than 500 line

No more than

430 line

Multiple kinds

Picture proportion

One kind

Subtitle

32 kinds

16 kinds at most

Sound quality

48KHz, 96KHz/

6, 20, 24bit

44.1KHz/ 16bit

Singleside singlelayer

4.7G

Double

-side single

-layer

8.5G

Singleside doublelayer

9.4G

Doubleside doublelayer 17G

Dics Protection and DVD Characteristics

P. 3 7

Note:The diagrams in the following section are schematic and only for your reference. Please see the actual product if necessary.

TO USE THE USB DEVICE

1.Supported file formats:

1)Photo: *.jpg

2)Music: *.mp3 files

3)Movie: MPEG1/MPEG2: some*.mpeg files;

4)TEXT:*.txt; Note: Due to the particularity of file cording, some files may be unable to read.

2.Supported equipment: Support the equipment that supports Mass Storage Protocol and whose file system is FAT16/FAT32,such as some USB disks, mobile harddisks,MP3 player and digital cameras. If USB equipment could not be identified due to unsupported file system, please format the equipment to the above-mentioned file system.

3.To achieve smooth playing, ensure the following:

1) The file code rate should be lower than 300KB/S;

2)Due to the limitation of USB signal transmission distance, it is recommended not to use USB patch cord, in case of using the cord ,make sure that its length is not over 1m;

3) Use high-speed USB equipment in conformity with USB2.0 Interface Standard; If USB equipment in conformity with USB1.1 Interface Standard is used ,the playing may be unsmooth.

Streaming Media Playing System.

P. 3 8

05 Using the features

When connecting/removing the USB device

1. Press SOURCE on the remote control unit to select USB option.

2.Insert USB equipment into corresponding USB interface 2s after starting the system.

3. After entering the system menu, press on the remote control unit to select the require USB equipment press “OK” button to confirm the selection and enter the interface .

5. To exit the streaming media playing system and watch a TV program, you must press“BACK” button to return to the streaming media main menu at first(to protect equipment), and then press SOURCE to select TV to return to the TV mode.

Notes:

1. B ,

M mode

2.While playing the USB ,press “BACK”button repeatly, the screen picture will return to USB main interface, and only at this time you can switch corresponding signal sources by pressing “SOURCE” again.

Under source of US , when press button MENU screen goes black, except when images or movies are being played. When playing images , please press button P. ode to adjust picture .

When playing movies, please press button P. Mode and S. Mode to adjust picture characters.. When playing music, you could press button S. Mode to adjust sound mode.

Please do not turn off the TV or unplug the USB device when the connected USB storage device is working.When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.

4. Press to change pages then press on the remote control unit to select the required file, press OK button to enter the selected file.

Streaming Media Playing System.

P.39

Operating the USB device

1. Press to scroll through main menu or submenu and select your desired option.

2.Press “OK” to confirm your selection.

3.Press “(FWD)/(REV)” to achieve the FWD (fast forward) and REV (fast back) of option being played.

the

4. Press "PLAY/PAUSE" to play and press it again to pause playing.

5.Press “ZOOM” to magnify pictures; in zoom mode, press “ ” and to move the picture.

6.Press “ STOP ” to stop playing ,or return to the previous menu, and press “BACK” repeatedly to return to the main menu.

NOTE: You can choose the photos or music in different files to play together.

Streaming Media Playing System.

P. 4 0

05 Using the features

Playing a Picture

1.After entering USB main interface, press to select “PHOTO” item.

2.Press OK to confirm the selection

and enter the picture playing interface.

3. Press to change page and

press to select the picture you want to play press OK to enter the playing display interface, and then press “PLAY/PAUSE” button to play the pictures.

4. If you want to pause the picture which is being palyed, press the PALY/PAUSE

button again.

Press ZOOM to magnify the picture and then press to move the picture

Press PREV/NEXT ” to select the last or next picture.

Press to rotate the picture.

Press “STOP ” to stop the picture being played.

4.To exit playing, just press BACK repeatedly.

NOTE:The menu display varies with the photo name and pixel in your equipment.

Streaming Media Playing System.

P. 4 1

Playing Music

1. After entering USB main interface, press to select “MUSIC”.

2. Press OK to confirm the selection and enter the music playing interface.

3. Press to change page and press and “OK” button to select the music you want to play then press to play the music.PLAY/PAUSE button

4. To exit music playing just press BACK repeatedly.

Press PREV/NEXT ” to select the last or next music.

Press “STOP ” to stop the picture being played.

Press “ ” to achieve the REV (fast back) and FWD (fast forward) of music being played

the

NOTE:

1. Play the selected musics. Once a music finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current folder will be played.

2. REPEAT button is not available, when the music is being played.

Streaming Media Playing System.

P. 4 2

05 Using the features

Playing a Movie

2. Press OK to confirm the selection and enter the movie playing interface.

3. Press to change page and press and “OK” button to select the movie you want to play and then press PLAY/PAUSE button to play the movie.

4. To exit playing, just press BACK repeatedly.

1. After entering USB main interface, press to select “Movie”.

Press ZOOM to magnify the picture

Press PREV/NEXT ” to select the last or next movie.

Press “STOP ” to stop the movie being played.

Streaming Media Playing System.

P. 4 3

Text

1. After entering USB main interface, press to select Text .

2. Press OK to confirm the selection and enter the text playing interface.

4. To exit the Text mode just press BACK repeatedly.

3. Press to change page and press and “OK” buttonto select the text you want to play and then press PLAY/PAUSE button to play the text .

Press PREV/NEXT ” to select the last or next text.

Streaming Media Playing System.

P. 4 4

05 Using the features

To assist in location possible faults use help guide below.

Note:

1.If the fault can not be repaired using the above guide consult with your local authorized service center.

2.The TV set must only be repaired by a qualified registered service person. Never attempt to remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.

Troubleshooting Guide

Troubleshooting

No picture, no sound

Verify if the television is properly plugged in. Verify if the television has a proper supplied power source. Verify if electricity is available.

Blank screen

Verify if correct signals are input. Operate the remote to change signal input to correct input. Restart the television if power supply is interrupted.

No sound

Press MUTE button and verify if Mute mode is set. Switch to other channel and verify if the same problem happens. Press VOL+ button to see if the problem can be solved.

Poor sound

Verify if sound system is correct. Refer to user's manual for adjustment.

No picture in some channel

Verify if correct channel is selected. Adjust the antenna.

No color for some channel program (black and white)

Verify if the same problem exists in other channels. Check out of picture and sound systems. Refer to relative instructions in the Manual for color adjustment.

Spots with some or all pictures

Verify if the antenna is correctly connected. Verify if the antenna is in good condition. Make fine adjustment of channel.

Television out of control

Disconnect the television from power supply and 10 seconds later, connect the television to the power supply. If the problem still exists, contact authorized after-sales service for technical assistance.

P.45

06 Reference Sections

Specifications

Note: All specifications are subject to change without notice. All quality are approximate value.

Specifications of the television that you have just purchased may vary from the information in this table due to technical innovations.

Accessories

Picture, sound system

Audio output

External input port

Power requirements

Temperature

2.5W+2.5W

COMPONENT input PC input S-VIDEO input Audio input SCART Antenna input HDMI input,USB

~150-240V 50/60Hz

PAL/SECAM-B/G,I,D/K,L,L

Working:5 C~35 C

Storage:-15 C~45 C

Power consumption

35W

Model

Remote control Batteries Owner's manual

55W

Humidity

Working:20%~80%

Storage:5%~90%

P. 4 6

06 Reference Sections

Bush A322D, A322, A Series, A3 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual