Bush A322D, A322, A Series, A3 Instruction Manual

Customer helpline: 0845 604 0105

19 /22 Digital LCD Television
INSTRUCTION MANUAL

P. 0 2

P.12

P.04

P.05

01 Safety Notice

02 About your LCD

03 Getting Started

04 Basic Operation

P.06
P.07
P.08

P.09
P.09
P.09
P.10
P.10
P.11
P.12
P.12

P.12

P.13

Safety Notice

Front Panel Control
Connection
Remote Control
Installing Batteries

Connection Instructions
External equipment connections
Antenna Connection
VGA Input
YPbPr Input
S-VIDEO Input
SCART Input
CI Card Input
HDMI Input
USB Input

Basic Operating Instructions
Turn on the LCD-TV
Inputs selection
V+/V­Mute
Sound Mode
Select the TV Channel
Picture Mode
Q.VIEW
Sleep/ARC/Zoom
Menu Operations
Picture Menu Options

Contents

P.13

P.14

P.14
P.14
P.14

P.14

P.15
P.16

P.13
P.13

P.14

P.17
P.18
P.19
P.21

P.22

Sound Menu Options
Function Menu Options
Lock Menu Options.
Lock Menu Options Continued
Tuning Menu Options
Tuning Menu Options Continued
Time Menu Options
Time Menu Options Continued

P.23
P.25

P.26

P. 0 3

05 Using the features

06 Reference Sections

P.31

P.37
P.38

P.46

TELE TEXT
Basic Playback
Advanced Playback
Special Function Playback
DVD System Setup
Playable Discs
Disc Protection and DVD Characteristics

Streaming Media Playing System

Troubleshooting Guide
Specifications

P.47

P.32

P.30

P.29

P.27

P.36

P. 0 4

Safety Notice

To prevent fire or electric shocks please read the instruction before
installing, using and cleaning the television.

Please read all the instructions before operation;
Please keep the manual for future reference ;
Do not use any accessories that are not recommended by the manufacturer:
Before operation, make sure the operating voltage of this unit is corresponds

with your house electrical supply;

Do not place the unit on unstable or in dusty and humid places;
Never put the unit in direct sunlight or near heat sources;
Allow enough space for proper ventilation;

Please keep water away from the LCD-TV . If water comes in to contact with
the LCD-TV, disconnect the power cord from the power source, then wipe the
set with a dry soft cloth;

Do not remove the back cover. If servicing is required , please refer to

customer helpline.

P. 0 5

Front Panel Control

Control Panel Function

1. Standby switch

2. SOURCE Call the Input Source menu/Confirm button when operation
menu.

3. MENU Press to select the main menu

4. VOL- Volume down / Left orientation to adjust the item in the OSD
VOL+ Volume up / Right orientation to adjust the item/Press to enter

5. CH- TV channel down / to select the item in the menu
CH+ TV channel up / to select the item in the menu

6. Power indicator

7. Remote Sensor

(The figure above and the description of the button may be different,
all picture in this manual is just for reference, please see the actual set.)

SOURCE MENU VOL- VOL+ CH- CH+ STANDBY

02 About your LCD

02 About your LCD TV

ANT IN COAXIAL

S-VIDEO

VGA IN

PC AUDIO IN

Common Interface

Common Interface

R-AUDIO-L

TV SCART

TV SCART

Pr

Pb

Y

HDMI USB

Connection

USB
HDMI
TV SCART
YPbPr
Common Interface
S-VIDEO
AUDIO IN
VGA IN

PC AUDIO IN

ANT IN

Connect to HDMI output of other equipment

Connect a component video/audiodevice to these jacks

Component/S-Video Audio Input

Earphone port
COAXIAL

Connect to the VGA 15PIN analog output connector of the Pc display card for PC

display purpose

Connect the PC outpu tconnec tor from a PC to the audio

Connect cable or antenna signals to the TV, either direc-tly or through your

cable box.

P. 0 6

02 About your LCD TV

Just take one TV with DVD for example,

please see the real)

DVD insert

STOP

PLAY/PAUSE

OPEN/CLOSE

PREV

NEXT

(Please refer to actual product
of the DVD slot and buttons)

Remote Control

When using the remote control, aim it

towards the remote sensor on the TV

Stand By

DVD Menu

DVD open/close

Picture Mode

Sound Mode

Call Screen Display

Sleep button

DTV Audio/NICAM/DVD Audio

Aspect Ratio Control button(except for DVD&USB )

Channel list button

Subtitle button

Program Number Channel selection

Source Exchange

Q.VIEW

V+/V- :Volume selection

P+/P-:Channel selection

Mute

Menu button

GUIDE Button (only for DTV)

Favourite button

OK button

Cursor Mover Button

Back button (only for USB)

Exit Screen Display

REPEAT (only for USB)/CANCEL button

Zoom(only for DVD &USB)/Teletext index(only for TV)

Play/pause button(only for DVD &USB)

STOP(only for DVD &USB)

FAST REVERSE(only for DVD &USB)

FAST FORWARD(only for DVD &USB)

PREVIOUS(only for DVD &USB)

NEXT(only for DVD &USB)

DVD SET UP/ TEXT

DVD TITLE/TELETEXT MIX

DVD SEARCH/TELETEXT SUBCODE

DVD 10+/TELETEXT HOLD

DVD PROGRAM/TELETEXT REVEAL

DVD A-B REPEAT/TELETEXT SIZE

DVD ANGLE/TELETEXT TIME

DVD CALL/TELETEXT MODE

Buttons on the remote control

NOTE:Red button GREEN button
blue button and yellow button are fast
text button in analog signal .Function
button in DVBT (just reference the OSD)

P. 0 7

SCREEN

STOP

.

Installing Batteries

Installing Batteries

1.Open the cover of the battery compartment at the back of the remote
control.

2.Insert two AAA alkaline batteries in the compartment. (plus and minus poles to
respective mark)

3.Replace the cover of the battery compartment.

Precautions

Make sure that there is no
obstacle between the remote
controller and television set.

As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.

Keep the remote controller
away from heat source or
humid area to ensure
effective performance of
the remote controller.

Make sure that two AAA 1.5V alkaline
batteries are loaded. The batteries
must be of the same type. The batteries
must be located properly. The batteries
are not rechargeable. If your TV is to be
stored for a period of time, remove the
batteries from the remote control.

3

2

1

P. 0 8

02 About your LCD TV

Connection Instructions

External Equipment Connections

Antenna Connection

- Antenna or Cable Service with a Cable Box Connections

- For optimum picture quality, adjust antenna direction if needed.

Multi-family Dwellings/Apartments
(Connect to wall antenna socket)

wall antenna
socket

VHF antenna
UHF antenna

outdoor
antenna

Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)

Be careful not to bend the bronze
wire when connecting the antenna.

To improve picture quality in a poor
signal area, purchase and install a
signal amplifier.

If the antenna needs to be split for two
TV s, install a 2-Way Signal Splitter
in the connections.

If the antenna is not installed properly,

contact your dealer for assistance.

NOTE: All cables shown are just for example.

RF coaxial wire (75 ohm)

ANT IN

ANT IN

P. 0 9

03 Getting Started

Connection Instructions

You can use your LCD-TV as a monitor for your personal computer using a VGA cable
(not supplied).

VGA Input

Connection and use steps:

1.Read the user guide supplied with
your computer and ensure that it has
a VGA connector;

2.Make sure that the power of the LCD

-TV and the PC are off;

3.Connect a D type 15-pin VGA interface
cable ( not supplied ) to the VGA video
interface connector on the PC. Then
connect the other end to the PC video
interface connector on the back of the
LCD-TV.Tighten the screws on the VGA
connectors once they are firmly
connected, connect the audio cable(not
supplied)to the audio input on the back of
your LCD-TV;

4.Turn on the power of the LCD-TV first ,
and then turn on the power of the PC;

5.Set the video input mode of the LCD-TV to PC;

6.Check the image on your TV. There may be noise associated with the

resolution, vertical pattern, contrast or brightness in PC mode. If noise
is present, change the PC mode to another resolution, change the refresh rate to another rate
or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate
of the PC graphic card cannot be changed,change the PC graphic card or consult the
manufacturer of the PC graphic card.

Frame frequency (Hz)Line frequency (Khz)

VGA

SVGA

XGA

640*480 31.5KHz 60Hz

800*600 37.9KHz 60Hz

1024*768 48.4KHz 60Hz

Mode Resolution

Note: All above listed are subject to VESA Criteria.

YPbPr Input

How to connect

Connect the DVD video outputs (Y, PB, PR)
to the Component(Y, Pb, Pr) in socket on
the TV and connect the DVD audio outputs
to the AUDIO jacks on the TV, as shown
in the figure.
NOTE: If your DVD player does not have
component video output, use S-Video.

How to use

1. Turn on the DVD player, insert a DVD.

2. Set the mode of the LCD-TV to Component.

VGA IN

P. 1 0

03 Getting Started

Connection Instructions

(If connected to S-Video,select the S-Video external input source.)

3. Refer the DVD player's manual for operating instructions.

Component Input ports

To get better picture quality, connect a DVD player to the component
input ports as shown below.

S-VIDEO Input

Connection and use steps:

1.Read the user guide supplied with your AV devices and ensure that it has
S-Video connectors;

2.Make sure that the power of the LCD-TV and the AV device are switched off;

.Turn on the power of the LCD-TV first ;
and then turn on the power of the AV
device;

4.Set the video input mode of the LCD-TV
to S-Video mode .

Connection Option 1

Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.

Connection Option 2

1. Connect the audio and S-Video cables
from the VCR's output jacks to the TV
input jacks, as shown in the figure.

2. Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the
VCR owner s manual.)

3

- To avoid picture noise (interference), leave an adequate distance between the
VCR and TV

.

VCR

1

2

P. 1 1

Connection Instructions

SCART Input

1.Connect the scart lead from the external device(DVD
players, settop boxes or game consoles, to the TV SCART
socket.

2.Set the mode of the LCD-TV to SCART.

3. Press Play button on external equipment and it should
appear on the screen.

HDMI

HDMI

HDMI Input

HDMI Devices

Connect the cable from the HDMI devices
to the TV HDMI, as shown in the figure.

How to use

1. Set the mode of the LCD-TV to HDMI.

2. Operate the corresponding external equipment.
Refer to external equipment operating guide.

SCART

External equipment

TV

HDMI Devices

CI Card Input

The common interface (CI) slot is designed to accept the Conditional
Access (CA) Module and Smart card in order to
view the pay TV programmes and additional
services. Contact your Common Interface
service provider to get more information about
the modules and subscription. Please noted that
CA modules and smart cards are neither
supplied nor optional accessories from us.
Warning: switch off your TV before any module
is inserted in the Common Interface slot.
Insert the CAM correctly, then Smart Card to the
CI slot that is located at the side of the TV.

USB Input

USB

USB Devices

Connect the USB device to the USB IN jack on the side
of TV(or on the back of TV).

How to use

After connecting the USB IN jack, you use the USB
function. The USB function is illustrated in the page 38-42.

P. 1 2

03 Getting Started

Basic Operating Instructions

Turn on the LCD-TV

When the POWER(STANDBY) button on the remote control is pressed and the LCD-

TV is turned on, the indicator light on the front of the LCD-TV changes from red to

green. When the LCD-TV is turned off using the POWER(STANDBY) button, the

LCD-TVwill go into standby mode and the indicator light turns red.

You can also turn on the TV from standby mode by pressing the digits(1-9) or P-/P+.

V+/V-

Press the V+/V- button to increase/decrease the volume and there will be display
on the bottom of the screen.

The display will appear on the screen

when the TV is turned on for the first

time:

Press to select the language you

want, then press to select the

Auto Search and OK to enter the submenu:

press to select the country you are in,

then press to move to the following

item and to select Start , then press

OK to confirm.

All channels will be stored after the

searching.

/

/

/

/

/

Inputs selection

Press SOURCE button to display the Source menu.
Press button to select the inputs you need and
the TV will turn to the source automatically
in 3 seconds or press OK to confirm.

/

Installation Guide

Language English

Auto Search

Please select country first
Then select Start to update info.

Country selection UK

Start Cancel

EXIT

MENU

OK

DTV
TV
SCART
Component
PC
HDMI
S-Video
USB
DVD

Source

EXIT

OK

P. 1 3

04 Basic Operation

Select the TV Channel

You can use the number keys on the remote control to directly select TV channels.
The LCD-TV can store up to 100 channels , and you can press the P+/P- keys on the
remote control or on the TV set to make a selection.

Picture Mode

Press P.MODE button on the remote control for menu display . For desired mode as
follows:
Standard Mild Personal Fresh

Q.VIEW

1 S
2

3

uppose the TV set is in channel 8 just now and in channel 18 now .

If you want to return to the last watched program in channel 8, you can simply press

the

Q.VIEW button.

If you want to return to channel 18, press the button again. Through this function,

you can easily change between the channel you are watching and the channel you
watched just now.

Sleep

Press SLEEP button to set the sleep timer among Off/10min/20min/30min/60min/
90min/120min/180min/240min.

Sound Mode

Press S.MODE button on the remote control for menu display . For desired
mode as follows:
Standard Music Theatre Voice Personal

Zoom/SCREEN

ZOOM key is not only available in Picture and Movie which from USB part,but also
available in DVD part.

In other sources, press SCREEN to select the picture with different aspect ratio.

P. 1 4

Mute

1.Press the MUTE button to mute the sound temporarily. A mute icon appears on the
screen.

2.Press the MUTE button again or V+ to restore the sound.
The mute icon disappears.

04 Basic Operation