Bush A147CR6W, A147CR6B Installation & User's Instructions

Download

Page 1

Washing Machine

Installation & User Instructions –

Please keep for future reference

A147CR6W

A147CR6B

These instructions contain important information which will help you get the best from your appliance and ensure safe and correct installation, use and maintenance.

If you need help or have damaged or missing parts, call the Customer Helpline:0845 600 4632

Important –

Please read these instructions fully before installing or using

52062999 – 14/11/11

Page 2

Product codes

A147CR6B

A147CR6W

Contents

Customer Helpline: 0845 600 4632

Safety Information 2

Parts

Installation 4-6

Unpacking your washing machine 4

Removing the packing bolts 4

Water inlet hose connection

Drain hose connection

Electrical connection 6

Control Panel Functions

7-9

Program Selection Guide

User Instructions 11

Before first use 11

Preparing for a wash 11

Using your washing machine 12

Error Signals 13

Care and Maintenance 14-15

Water inlet filters

Pump filter 14

Detergent drawer

Siphon plug 15

Cabinet

Trouble Shooting

16-17

Technical Specifications

Guarantee 19

Page 3

• This appliance is not to be used by children or

persons with reduced physical, sensory or mental capabilities, Persons with lack of experience and knowledge.

• Do not use a multiple socket or extension

cord.

• Do not use if the power lead is damaged. It

must be replaced by the manufacturer, their approved service agent or similarly qualified person. Customer Helpline: 0845 600 4632.

• Do not insert the plug into the power supply

with wet hands.

• Do not touch or use the appliance when

barefoot or with wet or damp hands.

• Do not open the detergent drawer during a

wash cycle.

• Do not touch the porthole (door) during the

washing cycle - it will get hot.

• Never force the machine door open while the

machine is running.

• Do not open the door if water is visible

through the porthole.

• Do not wash foam rubber or sponge like

materials on a hot wash.

• The machine can reach high temperatures

while running. Do not touch the drain hose or waste water during draining.

• Do not forget that the packing material of your

machine may be hazardous for children.

• Keep your pet away from your machine.

• Do not use flammable detergent, sprays or dry

cleaning agents in or near to the appliance.

• Do not remove or insert the plug in the

presence of flammable gas.

• The appliance should not be put on a carpet

which can block the air ventilation on the bottom side.

• Do not place heavy objects or sources of heat

or damp on top of the washing machine.

• Only use detergents which are suitable for

automatic washing machines and follow the detergent manufacturers recommendations.

• Do not use this appliance if there are any

missing or damaged parts.

• Do not attempt to repair the appliance

yourself. Contact the manufacturer, their approved service agent or the Customer Helpline: 0845 600 4632.

Safety Information

Important –

Please read these instructions fully before installation

• The installation of this appliance is best

carried out by 2 people.

• Dispose of all packing carefully and

responsibly.

• This appliance is for indoor use only. Only

install in a dry indoor environment.

• The appliance MUST be positioned on a firm

level base.

• Do not position the appliance where it is

exposed to direct sunlight or heat sources as this will age the plastic and rubber components.

• Warning: Ensure all 4 packing bolts have been

removed.

• Ensure the appliance is connected directly to

a domestic mains water supply.

• Warning: This washing machine MUST only

be connected to a cold water supply.

• Ensure all electrical connections are as stated

in this document.

• Ensure the appliance is plugged into a

separate earthed socket that is easily accessible.

• Ensure the power lead is not trapped under

the appliance.

• Do not connect the appliance to the power

supply until installation is complete.

• This appliance is for domestic/household use

only and is not suitable for commercial use.

• Check that the water hose joints and

connections are secure and there are no leaks. If the hoses leak, do not use until the leaks have been stopped.

Before use

During use

Page 4

8 9

7 7

Back

7.Packing bolt x 4

8.Power lead

9.Drain hose

10.Water inlet

Plastic plug x 4

Parts

Please familiarise yourself with the parts and accessories listed below

2 3 4 5

Front

1.Detergent drawer

2.Top panel

3.Program selection dial

4.Spin speed selector knob

5.Electronic display

6.Door

7.Filter

Water inlet hose x 1

If you have damaged or missing parts,

call the

Customer Helpline: 0845 600 4632

Accessories included

Page 5

1 2

3 4

5 6

Installation

Customer Helpline: 0845 600 4632

Unpacking your washing machine

Caution:

2 people are required to unpack the washing machine, it is recommended that gloves are worn.

Carefully remove all packaging materials

including the foam base, dispose of correctly.

Note:

When opened, water droplets may be

visible in the drum etc. this is normal as each appliance is factory tested.

Removing the packing bolts

Important:

The packing bolts are

designed to support the internal components during transit, these

MUST be removed before use.

a: Loosen the screws by rotating

counterclockwise with a suitable wrench. (1 & 2)

Remove the bolts by pulling them. (3)

c: When the transport bolts have been removed, insert the plastic transport screw taps found in

the accessories bag into the holes. (4)

Removing the packing bolts

For your machine to work efficiently with minimum vibration it should be settled on flat, non-slippery, firm ground.

b: You can adjust the balance of your machine by changing the positioning of its feet.

c: First, loosen the plastic adjustment nut. (5)

d: Adjust by rotating the feet upwards or

downwards. (6)

e: After the desired position has been reached, tighten the plastic adjustment nut again by rotating it upwards.

Note: Never put cartons, wooden blocks or similar materials to balance the machine on uneven ground.

Page 6

Installation

Customer Helpline: 0845 600 4632

Water inlet hose connections

Important:

This washing machine MUST only be connected to a cold water supply.

a: Connect the water inlet hose, the angled connection attaches to the water inlet on the back of the washing machine. (7)

b: The straight connection attaches to the water supply valve. (8)

c: Ensure all seals are in place before connecting.

Important: Only tighten the hose connection nut by hand - do not overtighten.

Drain hose connections

Important:

The height of the top of the curve in the drain hose MUST be between 60 - 100cm from the floor. (9)

Important: The end of the water drain hose may be fitted directly to the waste water outlet hole or a special apparatus mounted on the outlet bracket of the wash-stand.

Important: Never attempt to extend the water drain hose by adding extra parts.

Continued on next page

Max. 100cm

Min. 60cm

Page 7

Installation

Customer Helpline: 0845 600 4632

Electrical connections

Any electrical work that is

required to install this washing machine MUST be carried out by a qualified electrician.

Warning: THIS APPLIANCE MUST BE EARTHED

Before making any electrical connections, ensure that:

• Ensure the power socket is suitable for the

maximum power of the washing machine (fuses in the power circuit must be 13 amp).

• The supply voltage should be the same as

that indicated in the technical specifications (page 17) and the appliance rating plate (located where shown).

• The appliance should be earthed and in

compliance with the applicable law.

• Additional earth cables should not be

necessary if the plug and socket are earthed. If necessary, an additional earth cable should be attached to the earth terminal on the back of the washing machine and earthed.

• When installed, the power socket must be

within easy reach.

• The use of adapters, multiple connectors or

extension cables are not recommended.

• The appliance must be connected to a 220-

240 volt 50 cycle AC supply by means of a three pin socket, suitably earthed and protected by a 13 amp fuse.

• Should the fuse need to be replaced, a 13

amp fuse approved to BS1363/A must be used.

• The plug contains a removable fuse cover

that must be refitted when the fuse is replaced. If the fuse cover is lost or damaged, the plug must not be used until a replacement cover has been fitted or the plug is replaced.

• A damaged plug should be cut off as close

to the plug body as possible, the fuse should be removed and the plug disposed of safely.

Plug replacement (UK & Ireland only)

Should you need to replace the plug; the wires in the power cable are coloured in the following way:

Blue – Neutral ‘N’ Brown – Live ‘L’ Green & Yellow – Earth ‘E’

As the colours of the wires in the power cable may not correspond with the coloured markings identifying the terminals in your plug, and proceed as follows:

The green & yellow wire must be connected to the terminal in the plug that is marked with the letter E or by the earth symbol.

The blue wire must be connected to the terminal that is marked with the letter N.

The brown wire must be connected to the terminal that is marked with the letter L.

If the power lead is damaged, it must be replaced by a qualified electrician.

Page 8

1. Detergent drawer

2. Program selection dial

3. Pump filter to clean light

4. Cut of water light

5. Spin speed selector knob

6. Easy ironing button

7. Delay timer button

8. Temperature select button

9. Start / Pause button

10. Electronic display

2 3 4 5 6 7 8 9 10

Control Panel Functions

Customer Helpline: 0845 600 4632

1. Detergent drawer

a: Prewash detergent b: Main wash detergent c: Fabric softener d: Siphon plug e: Liquid level detergent plate ( in accessory bag)

2. Program selection dial

With the program knob, you can select the program with which you desire to wash your clothes. You must be careful that the adjustment sign of the program knob is exactly on the program you want to select. If you move the program knob to 0 (off) position, while your machine is running, your program will be cancelled.

3. Pump filter to clean light

If symbol

flashes on the control panel:

-Pump filter may be clogged. Clean the pump filter. (*)

-Discharging hose may be clogged or twisted. Check the discharging hose. (*) See the chapter regarding care and maintenance of your machine (see page 14).

Continued on next page

Page 9

Control Panel Functions

Customer Helpline: 0845 600 4632

4.Cut of water light

If symbol flashes on the control panel:

- Water fauc et m ay be cl os e d. Check.

- Mains water may be cut-off. Check. If so, switch the programme knob to position 0. You can select a programme and run your machine after the mains water is supplied.

- Mains water pressure may be low. Check.

- Water inlet hose may be twisted. Check.

- Water inlet hose may be clogged. Clean water inlet hose filt er s. (*)

- Valve inlet filter may be clogged. Clean the valve inlet filters. (*) (*) See the chapter regarding care and maintenance of your machine (see page 14).

5.Spin speed selector knob

By the spin speed selector knob, you can make the adjustment of speed for the process of spinning your clothes.The speed adjustment interval is

between

(No spin) and the maximum spinning speed of your machine. Please note; in some cases the machine will override the spin speed selector knob depending upon the wash program.

6. Easy ironing button

Your laundry will be less creased if the easy ironing function is pressed /selected.

7. Delay timer button

By using this function, you can delay a wash by 1 hour to 23 hours. To use the delay timer:

- Press time delay button once.

- “1h” will appear on the display.

- Press the time delay button repeatedly until desired delay time is reached.

- To activate the time delay you have selected, you may press on any function button except “Start/Pause” button. To reset delay time repeatedly press button until the time return to desired delay. To cancel delay to press the delay timer button once. To run delay timer function, press on Start/Pause button. As soon as you start your machine, the count down process will start on the

electronic display based on th e del ay period you

have selected.

Continued on next page

Page 10

Control Panel Functions

Customer Helpline: 0845 600 4632

8. Temperature select button

You can select the washing water temperature with the washing water temperature adjustment button.

Whenever you select a new programme, the maximum washing water temperature is shown on the washing water temperature display.

You can gradually decrease the water temperature between the maximum temperature and cold washing (--) by pressing the water temperature adjustment button.

If you have missed the washing water temperature you wanted, you can return to the intended temperature by continuously pressing the washing water temperature adjustment button.

9. Start / Pause button

Used to start a selected program or pause during running.

10.Electronic display

a-Door lock light The door lock lighting, machine locked the door.

b-Child lock light When the clild lock is lit, the child lock will be active.

c-Wash light

The wash light, indicates that the machine has begun the wash cycle.

d-Rinse light

The rinse light, indicates that the machine is in the process of a rinse.

e-Spin light

The spin light, indicates that the machine is in a spin cycle.

f-Display On the electronic display, you may view the water temperature, the amount time your machine will continue washing. Furthermore, it will warn you by means of fault symbols on the display when a fault occurs on your machine and notify you of the completion of the washing programme by showing “END” on the display as soon as the wash programme you have selected has finished.

Continued on next page

a b c d e f

Page 11

Program Selection Guide

Customer Helpline: 0845 600 4632

PROGRAM

PROG.

TIME

(mins)

DETERGENT

COMPART.

MAX LOAD

CAPACITY

(kg)

TYPE OF LAUNDRY

COTTON

1-95˚ 200 2 6

Very dirty cotton and flax textiles. (Underwears, linen, tablecloth, towel (maximum 3 kg), bedclothes, etc.

2-60˚ 200 2 6

Dirty cotton and flax textiles. (Underwears, linen, tablecloth, towel (maximum 3 kg), bedclothes, etc.

3-40˚ 190 2 6

Dirty cotton and flax textiles. (Underwears, linen, tablecloth, towel (maximum 3 kg), bedclothes, etc.

SPECIALS

1-SYNTHETICS 60˚ 105 2 3

Very dirty synthetic or synthetic-mixed textiles. (Nylon socks, shirts, blouses, syntheticincluding trousers etc.)

2-SILK 30° 90 2 2

Less dirty silk-mixed laundries with machine wash labels.

3-WOOL 40° 76 2 2 Woollen laundries with machine wash labels.

4-RINSE 45 - 6

If you want to additionally rinse your laundries upon completion of washing operation, you may use this programme for any kind of laundries.

5-SPIN 15 - 6

If you want to additionally spin your laundries

upon completion of washing operation, you may use this programme for any kind of laundries.

6-HAND WASH 30˚ 92 2 2

Sensitive and woollen laundries with non-

machine wash label recommended to be washed by hand.

7-SPORTS WEAR 30°

79 2 3 Sportswear.

8-MIX WASH 30° 90 2 3

Dirty cotton, synthetic, colour and flax textiles can be washed together.

9- SHIRTS / BLOUSES 60˚

110 2 3

Dirty, synthetic and synthetic-mixed shirts and blouses can be washed together.

10-BABY WEAR 50°

120 2 3

Baby clothes.

11-DAILY 60°

60 min.

60 2 3

You can wash your dirty cotton, colour and flax

textiles at 60°C in 60 minutes.

12-SUPER RAPID 30° 15 min.

15 2 2

You can wash your slightly dirty cotton, colour and flax textiles in 15 minutes. Note: As the washing period is short, less amount of detergent is required to be used compared to other programmes. The programme period will increase if your machine detects instable loading. You can open the door of your machine 2 minutes after the completion of washing operation. (The duration of 2 minutes required to open the door of your machine is not included in the washing period.)

(*) You can use softeners in all programs (except spinning and draining programs) optionally. When you arrange the quantity of the softener, comply with the warning of the softener producer. Fill your softener in the (softener) compartment of the detergent drawer.

Note:Durations vary according to wash load (weight and type), tap water, ambient temperature and selected extra functions.

Page 12

a: Plug in the machine.

b: Open the water tap.

c: There may be water left inside your machine

after factory tests and trials. It is recommended that the first wash cycle be carried out with no laundry, to remove this water; pour half a measuring cup of normal laundry detergent into compartment 2 and select cotton program at 95°C.

d: Adjust the program knob to a program you desire.(Program number 1)

e: Run the program by pressing the Start/Pause

button.

f: Your machine will automatically stop when the program ends.

g: “END” will flash on the electronic display upon completion of the wash cycle.

User Instructions

Customer Helpline: 0845 600 4632

Before first use

Preparing for a wash

Laundry

• Sort your clothes according to their types

(cotton, synthetic, delicate, woolen, etc.), washing temperatures and level of dirtiness.

• Never wash your white and coloured clothes

together.

• Since your new coloured clothes may

release dye on the first wash, wash them separately.

• Remove any small objects from the pockets

of your clothes.

• Ensure that all zips and buttons on your

clothes are fastened.

• Remove the plastic or metal hooks of

curtains or place them inside a washing bag and tie.

• Turn clothes such as trousers, knitted

fabrics, t-shirts and sweat shirts inside out.

• Wash your small clothes like socks and

handkerchiefs in a washing bag.

Placing clothes into the machine

• Open the door of your machine.

• Put your clothes into your machine in a

well-balanced manner.

• Place your clothes loosely in the machine.

• When you shut the door of your machine, be

careful that no cloth is jammed between the cover and the gasket.

• Shut the door of your machine securely,

otherwise your machine will not start the washing process.

Detergent

The quantity of detergent to be loaded into the machine will depend on the following criteria:

• Your detergent consumption will change

depending on how dirty the clothes are. For your slightly dirty clothes, do not pre-wash and put a small amount of detergent in compartment 2 of the detergent drawer.

• For your excessively dirty clothes, select a

program with pre-washing; fill ¼ portion of the detergent in compartment 1 in the detergent drawer and the remaining portion in compartment 2.

• Use detergents developed especially for

automatic washing machines. The quantities that will be used for your clothes are written on the packaging of the detergents.

• As the hardness of your water increases, the

amount of the detergent to be consumed will also increase.

• As the amount of clothing increases, the

amount of the detergent that will need to be used will also increase.

• Fill your softener in the softener

compartment in your detergent drawer. Do not exceed the MAX level. Otherwise, the softener will diffuse in the washing water via the siphon.

• Concentrated softeners with high viscosity

should be diluted with water before loading in the drawer. This is because high-viscosity softeners obstruct the siphon and prevent the flow of the softener.

• You can use liquid detergents in all

programs without pre-washing. For this, mount the liquid detergent level plate in the second compartment of the detergent drawer and arrange the amount of liquid detergent according to the levels on this plate.

Page 13

1. Loading

a: Open the door, place laundry item by item

into the washing machine, firmly close the door. b: Do not overload the washing machine (see the program selection guide for maximum load information, page 10).

2. Add detergent

Pull out the detergent drawer, add the detergent and softener to the correct compartments.

3. Select a washing program

Adjust the program knob to a program you desire.(Page 10)

4. Function buttons

Select the 'delay timer', ' temperature select' or 'easy ironing' settings as required (see page 8-9).

5. Start washing

Press the start/pause button and the washing machine will start.

6. Finish washing a: Your machine will automatically stop when the

program you have selected ends. b: Expression of “END” will flash on the electronic display.

c: Turn the program knob to O(off) position. d: The door will be unlocked approximately two

minutes after the program ends. e: You can open the door by pulling the handle of the door towards yourself and take out your clothes. f: After you unload your clothes leave the door open to dry the interior of your machine and to prevent mould from developing. g: Unplug your machine from the mains power supply.

h: Close the water tap.

Changing a selected program

If you have selected a program and you do not want it to continue:

a: Press the start/pause button. b: Bring the program knob to O(off) status. c: Adjust the program knob to the program you

desire. d: By pressing the start/pause button, run the program that you have selected. Note: If you want to change running program, O position should be used. Bringing the program knob to another position will not change running program.

8. Cancellation of a program

If you wish to end a running program early:

a: Press the start/pause button. b: Turn the program knob to O(off) status. c: Your machine will stop the washing operation

and the programme will be cancelled. d: To get rid of the water accumulated in the machine switch the programme knob to any programme. e: Your machine will perform the necessary discharge operation and cancel the programme. f: You can run your machine by selecting a new programme.

Note: If the power is interrupted at any stage of the washing program, your machine will continue the program from the point where it was interrupted. Provided no changes have been made to the program selected.

Child Lock

To avoid programme flow from being affected if programme knobs are pressed or programme knob is turned when performing washing operation in your machine, child lock is available. The child lock will become active after the first and second function buttons on the control panel are pressed at the same time and for longer than 5 seconds.

When it becomes active the electronic display will blink “CL” and child lock light will light up. If any button is preesed while child lock is active, the child lock light will blink on the electronic display. When any of the programmes are running and child lock is active, if another programme is selected after programme knob is switched to 0 position, the programme already running will contiune. To deactivate it, you will need to press on the same buttons for more than 5 seconds. When the child lock is deactivated, child lock light on the electronic display will go off.

User Instructions

Customer Helpline: 0845 600 4632

Using your washing machine

Page 14

Error Signals

Customer Helpline: 0845 600 4632

Your machine is equipped with systems which will take the necessary precautions and warn you in

case of any. IMPORTANT: IT CAN TAKE UPTO 10 MINUTES FOR ERROR TO REGISTER.

FAILURE

CODE

PROBABLE FAILURE PROCESS TO BE FOLLOWED

E01

The door of your machine is left open.

Close the machine door. If your machine persists to

indicate fault, turn off your machine, unplug it and contact the nearest authorised service immediately.

E03

Pump is faulty or pump

filter is clogged or electrical connection of the pump is faulty.

Clean the pump filter. If the problem persists, contact the nearest authorised service. (*)

E04

Your machine has excessive amount of water.

Your machine will discharge water by itself. After the discharging operation, turn off your machine and unplug it. Turn off your faucet and contact the nearest authorised service.

(*) See the section regarding the care and maintenance of your machine.

FAILURE

CODE

PROBABLE FAILURE PROCESS TO BE FOLLOWED

Water cut-off or low mains water pressure.

- Water faucet may be closed. Check.

- Mains water may be cut-off. Check.

- If so, switch the programme knob to position 0. You can select a programme and run your machine after the mains water is supplied.

- Mains water pressure may be low. Check.

- Water inlet hose may be twisted. Check.

- Water inlet hose may be clogged.

- Clean water inlet hose filters. (*)

- Valve inlet filter may be clogged.

- Clean the valve inlet filters. (*) If the problem persists, unplug your machine, turn off your faucet and contact the nearest authorised service.

Pump is faulty or pump filter is clogged or electrical connection of the pump is faulty.

- Pump filter may be clogged. Clean the pump

filter.(*)

- Discharging hose may be clogged or twisted. Check the discharging hose. If the problem persists, contact the nearest authorised service. (*)

Page 15

Before cleaning your washing machine.

a: Unplug your machine from the mains power supply.

b: Close the water tap.

Water inlet filters

On the tap part of your machine’s water inlet hose and at the ends of water inlet valves, there are filters to prevent the entrance of dirt and foreign materials into the water of the machine. If the machine is unable to receive sufficient water and your water tap is fully opened, these filters should be cleaned.

• Remove the water inlet hose.

• Remove the filters found on the water inlet

valves by using a pliers and wash thoroughly with a brush. (1)

• Clean the filters of the water inlet hoses

located on the tap side by removing manually together with the seal. (2)

• After you clean the filters, you can fit them

the same way as you have removed them.

Pump filter

The filter system lengthens the life of your pump, which is used to drain the dirty water. It prevents lint to enter the pump. Cleaning of your pump filter every 2-3 months is recommended. To clean your pump filter:

• Open the kickplate’s cover, by pulling the

handle. (2-A & 3-A)

• Before opening the filter cover,place a cup in

front of the filter cover to prevent flow of the remaining water in the machine.

• Loosen the filter cover by rotating it counter

clockwise and drain the water. (4-A)

• Remove the foreign materials from the filter.

• Check for the rotation of the pump manually.

• After you have cleaned the pump, fit the filter

cover by rotating clockwise.

• Put the kickplate cover into place.

• Do not forget that if you do not fit in the filter

cover properly, it will leak water.

Danger of being scalded! The water inside the pump

maybe hot- wait for it to cool.

Care and Maintenance

Customer Helpline: 0845 600 4632

Page 16

Detergent drawer

Detergents may form sediments in your detergent drawer or in the housing of the detergent drawer over time. To clean the sediment, pull out the detergent drawer from time to time. To pull out the detergent drawer:

• Pull the detergent drawer to the end. (1)

• Keep pulling and pressing on the siphon lid

inside the drawer until it is pulled to its end, and remove the drawer.(2)

• Wash with an old toothbrush and of water.

• Remove the leftover detergent, Avoid

dropping it back in to the machine.

• After drying the detergent drawer, replace it in

the housing by reversing the removal operations.

Siphon plug

Pull out the detergent drawer. Remove the siphon plug and clean the residues of the softener thoroughly. Fit the cleaned siphon plug in its location. Check it is placed properly.(3)

Cabinet

Clean the exterior surface of the cabinet of your machine with lukewarm water and a cleaning substance that will not damage the cabinet. After rinsing with clean water, wipe it with a soft and dry cloth.

Note:To get the best out of your machine. We Recommend that you periodically run a wash cycle with limescale remover, especially in hard water area.

Note: After each wash leave the door to the machine open to help air the drawer and reduce any mould build up;

Note: Wipe the door seal ideally after each wash;

Note: Undertake a maintenance wash every 4-6

weeks with the drum empty. This wash should be undertaken with lime scale and detergent remover;

Care and Maintenance

Customer Helpline: 0845 600 4632

Page 17

Trouble Shooting

Customer Helpline: 0845 600 4632

All repairs to the machine must be carried out by an authorised repair agent. When a repair is required or you are unable to eliminate the failure with the help of the information below:

a: Unplug the machine. b: Close the water tap. c: Contact the nearest authorised repair agent.

FAILURE PROBABLE CAUSE METHODS OF ELIMINATION

Your machine does not operate.

It is unplugged. Insert the plug into the socket. Your fuse is defective.

Change your fuse.

The electric power is off.

Check the electric power.

Start/pause button has not been pressed.

Press the start/pause button.

The programme knob is in the 0 (off) position.

Turn the programme knob to the desired position.

The door is not shut properly.

Shut the door properly. You should hear the click.

Your machine does not receive water.

Water tap is closed. Open water tap. The water inlet hose may be bent. Check the water inlet hose. The water inlet hose is obstructed.

Clean the filters of water inlet hose. (*)

The valve inlet filter is obstructed.

Clean the valve inlet filters. (*)

The door is not shut properly.

Shut the door properly. You should hear the click.

Your machine is not draining water.

The drain hose is obstructed or

bent.

Check the drain hose.

The pump filter is obstructed. Clean the pump filter. (*)

The clothes are not placed inside the machine in a well-balanced manner.

Spread the clothes inside the machine in an orderly and well-balanced manner.

Your machine is vibrating.

The feet of your machine are not adjusted.

Adjust the feet. (**)

Transportation screws are not removed.

Remove transportation screws. (**)

Your machine is vibrating.

There are only few clothes in the device.

It does not prevent operation of the machine.

Excessive amount of clothes are

filled in the machine or the clothes are not placed in a well-balanced manner.

Do not exceed the recommended

quantity of clothes and spread your clothes in the machine in a well-

balanced manner. Your machine is touching a rigid object.

Ensure machine is not in contact with

hard objects.

(*) See the section concerning the care and maintenance of your machine. (**) See the section concerning installation of your machine.

Page 18

Trouble Shooting

Customer Helpline: 0845 600 4632

FAILURE

PROBABLE CAUSE

METHODS OF ELIMINATION

Excessive foam in the detergent drawer.

Too much detergent has been used.

Press the start/pause button.In order to

stop the foam,dilute one table-spoon of

softener in half liter of water and pour it

in the detergent drawer.Press the

start/pause button after 5-10

minutes.Arrange the amount of the

detergent properly in the next washing

process.

Wrong detergent has been used.

Use only the detergents produced for

full automatic machines.

The washing result is poor.

Your laundry is too dirty for the programme you have selected.

Select a suitable programme.

(see page 8)

The amount of detergent used is not sufficient.

Use more detergent.

The washing result is not good.

Clothes exceeding the maximum

capacity have been loaded in the machine.

Put the clothes in your machine in a

manner not to exceed its maximum

capacity.

Your water may be hard.

Use the amount of detergent specified

by the detergent manufacturer.

Distribution of the clothes in your machine is not well-balanced.

Spread the clothes inside the machine in

an orderly and well-balanced manner .

The water is drained from the machine as soon as it is filled.

The end of the water drain hose is in a position too low according to the machine.

Position the water drain at an

appropriate height.(**)

No water is seen in the drum during washing.

No failure. The water is in the lower part of the drum.

There are residues of detergent on the clothes.

Some detergents contain ingredients which are not soluble in water and which may form white stains on your clothes.

By adjusting your machine, carry out an

additional rinse, or eliminate the stains

after drying, with a brush.

There are grey stains on the clothes.

These stains may be caused by oil,cream or ointment .

In the next washing operation, use the maximum detergent amount declared by

the detergent producer.

The spinning process is not done or starts with delay .

No failure. The unbalanced load control may work in that way.

The unbalanced load control system will

try to distribute your clothes in a

homogenous manner. After your clothes

are distributed, passage to spining

process will be realized. In the next

washing process,place your clothes into

the machine in a well-balanced manner.

(*) See the section concerning the care and maintenance of your machine. (**) See the section concerning installation of your machine.

Page 19

Technical Specifications

Model / Item A147CR6W A147CR6B

Power supply (220-240) V ~/50Hz (220-240) V ~/50Hz

Max working current 10 amp 10 amp

Water pressure

Maximum : 1 Mpa

Minumum : 0.1 MPa

Maximum : 1 Mpa

Minumum : 0.1 MPa

Maximum power 2100 watt 2100 watt

Maximum washing load (dry) 6 kg 6 kg

Spinning speed 1400 rpm 1400 rpm

Washing programmes 15 15

Size 845 x 597 x 527 845 x 597 x 527

Net weight 69 kg 69 kg

The symbol on the product or its packaging indicates that this product may not be treated as household waste. Instead it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling this product, please contact your local council office, your household waste disposal service or the shop where the product was purchased.

Disposal information

Page 20

Bush A147CR6W, A147CR6B Installation & User's Instructions

Specifications and Main Features

Frequently Asked Questions

User Manual