Burr Brown OPA2544T Datasheet
®
OPA2544
FPO
High-Voltage, High-Current
DUAL OPERATIONAL AMPLIFIER
FEATURES
● HIGH OUTPUT CURRENT: 2A min
● WIDE POWER SUPPLY RANGE:
±10V to ±35V
● SLEW RATE: 8V/µs
● INTERNAL CURRENT LIMIT
● THERMAL SHUTDOWN PROTECTION
● FET INPUT: I
● 11-LEAD PLASTIC PACKAGE
= 50pA max
B
APPLICATIONS
● MOTOR DRIVER
● PROGRAMMABLE POWER SUPPLY
● SERVO AMPLIFIER
● VALVES, ACTUATOR DRIVER
● MAGNETIC DEFLECTION COIL DRIVER
● AUDIO AMPLIFIER
DESCRIPTION
The OPA2544 is a dual high-voltage/high-current operational amplifier suitable for driving a wide variety
of high power loads. It provides 2A output current and
power supply voltage range extends to ±35V.
The OPA2544 integrates two high performance FET
op amps with high power output stages on a single
monolithic chip. Internal current limit and thermal
shutdown protect the amplifier and load from damage.
The OPA2544 is available in a 11-lead plastic
packages and is specified for the –40°C to +85°C
temperature range.
Case
connected
to V– Supply.
A
1
NC
International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111 • Twx: 910-952-1111
Internet: http://www.burr-brown.com/ • FAXLine: (800) 548-6133 (US/Canada Only) • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
© 1994 Burr-Brown Corporation PDS-1249C Printed in U.S.A. March, 1998
B
11
V+
V–
1 OPA2544
®
SPECIFICATIONS
At T
= +25°C and VS = ±35V, unless otherwise noted.
CASE
OPA2544T
PARAMETER CONDITIONS MIN TYP MAX UNITS
OFFSET VOLTAGE
Input Offset Voltage ±1 ±5mV
vs Temperature Specified Temp. Range ±10 µV/°C
vs Power Supply V
INPUT BIAS CURRENT
(1)
Input Bias Current V
vs Temperature Doubles every 10˚C
Input Offset Current V
NOISE
Input Voltage Noise
Noise Density, f = 1kHz 36 nV/√Hz
Current Noise Density, f = 1kHz 3 fA/√Hz
INPUT VOLTAGE RANGE
Common-Mode Input Range
Positive Linear Operation (V+) –6 (V+) –4 V
Negative Linear Operation (V–) +6 (V–) +4 V
Common-Mode Rejection V
INPUT IMPEDANCE
Differential 10
Common-Mode 10
OPEN-LOOP GAIN
Open-Loop Voltage Gain V
FREQUENCY RESPONSE
Gain-Bandwidth Product R
Slew Rate 60Vp-p, R
Full-Power Bandwidth See Typical Curve
Settling Time 0.1% G = –10, 60V Step 25 µs
Total Harmonic Distortion See Typical Curve
OUTPUT
Voltage Output: Positive I
Negative I
Positive I
Negative I
Current Output See SOA Curves
Short-Circuit Current ±4A
POWER SUPPLY
Specified Operating Voltage ±35 V
Operating Voltage Range ±10 ±35 V
Quiescent Current (total) I
TEMPERATURE RANGE
Operating Range –40 +85 °C
Storage –40 +125 °C
Thermal Resistance,
Thermal Resistance,
Thermal Resistance,
Thermal Resistance,
Thermal Resistance,
NOTES: (1) High-speed test at T
2
θ
JC
2
θ
JC
2
θ
JC
2
θ
JC
2
θ
JA
= +25°C. (2) Calculated from total power dissipation of both amplifiers.
J
= ±10V to ±35V ±10 ±100 µV/V
S
= 0V ±15 ±50 pA
CM
= 0V ±10 ±50 pA
CM
= ±VS – 6V 90 106 dB
CM
12
|| 8 Ω || pF
12
|| 10 Ω || pF
= ±30V, RL = 15Ω 90 103 dB
O
= 15Ω 1.4 MHz
L
= 15Ω 58 V/µs
L
= 2A (V+) –5 (V+) –4.4 V
O
= 2A (V–) +5 (V–) +3.8 V
O
= 0.5A (V+) –4.2 (V+) –3.8 V
O
= 0.5A (V–) +4 (V–) +3.1 V
O
= 0 ±22 ±30 mA
O
Both Amplifiers, f > 50Hz 2 °C/W
Both Amplifiers, DC 2.5 °C/W
One Amplifier, f > 50Hz 2.7 °C/W
One Amplifier, DC 3 °C/W
No Heat Sink 30 °C/W
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
®
OPA2544
2
CONNECTION DIAGRAM
ABSOLUTE MAXIMUM RATINGS
(1)
Front View 11-Lead Plastic
Case
connected
to V– Supply.
A
1
NC
V+
B
11
V–
Supply Voltage, V+ to V– ................................................................... 70V
Output Current ................................................................. See SOA Curve
Input Voltage .................................................... (V–) –0.7V to (V+) +0.7V
Operating Temperature ................................................. –55°C to +125°C
Storage Temperature ..................................................... –40°C to +125 °C
Junction Temperature...................................................................... 150°C
Lead Temperature (soldering, –10s) ............................................... 300°C
NOTE: (1) Stresses above these ratings may cause permanent damage.
PACKAGE/ORDERING INFORMATION
PACKAGE
DRAWING TEMPERATURE
PRODUCT PACKAGE NUMBER
OPA2544T 11-Lead Plastic 242 –40°C to +85°C
NOTE: (1) For detailed drawing and dimension table, please see end of data
sheet, or Appendix C of Burr-Brown IC Data Book.
(1)
RANGE
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
3 OPA2544
®
Loading...