Burr Brown INA154UA-2K5, INA154UA, INA154U-2K5, INA154U Datasheet

High-Speed, Precision
DIFFERENCE AMPLIFIER (G = 1)
©1999 Burr-Brown Corporation PDS-1482B Printed in U.S.A. March, 1999
®
FEATURES
DESIGNED FOR LOW COST
LOW OFFSET VOLTAGE: ±750µV max
LOW OFFSET DRIFT: ±2µV°C
WIDE BANDWIDTH: 3MHz
HIGH SLEW RATE: 14V/µs
FAST SETTLING TIME: 3µs to 0.01%
WIDE SUPPLY RANGE: ±4V to ±18V
LOW QUIESCENT CURRENT: 2.4mA
SO-8 SURFACE-MOUNT PACKAGE
INA154
DESCRIPTION
The INA154 is a high slew rate, unity-gain difference amplifier consisting of a precision op amp with a precision resistor network. The on-chip resistors are laser trimmed for accurate gain and high common­mode rejection. Excellent TCR tracking of the resis­tors maintains gain accuracy and common-mode re­jection over temperature. The input common-mode voltage range extends beyond the positive and nega­tive supply rails. It operates on ±4V to ±18V supplies.
The difference amplifier is the foundation of many commonly used circuits. The INA154 provides this circuit function without using an expensive precision resistor network. The INA154 is available in a SO-8 surface-mount package and is specified for operation over the extended industrial temperature range, –40°C to +85°C.
APPLICATIONS
DIFFERENTIAL INPUT AMPLIFIER
INSTRUMENTATION AMPLIFIER
BUILDING BLOCK
UNITY-GAIN INVERTING AMPLIFIER
SUMMING AMPLIFIER
DIFFERENTIAL CURRENT RECEIVER
VOLTAGE-CONTROLLED CURRENT SOURCE
SYNCHRONOUS DEMODULATOR
International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111
Twx: 910-952-1111 • Internet: http://www.burr-brown.com/ • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
2
3
4
–In
+In
V–
25k25k
25k25k
5
1
Sense
Ref
6
Output
7
V+
INA154
For most current data sheet and other product
information, visit www.burr-brown.com
2
®
INA154
SPECIFICATIONS: VS = ±15V
At TA = +25°C, VS = ±15V, RL = 2kconnected to ground, and reference pin connected to ground, unless otherwise noted.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant any BURR-BROWN product for use in life support devices and/or systems.
INA154U INA154UA PARAMETER CONDITIONS MIN TYP MAX MIN TYP MAX UNITS OFFSET VOLTAGE
(1)
RTO
Initial ±100 ±750 ±1500 µV
vs Temperature ±2 ±20 ✽✽µV/°C vs Power Supply V
S
= ±4V to ±18V ±5 ±60 ✽✽µV/V
vs Time 0.5 µV/mo
INPUT IMPEDANCE
(2)
Differential 50 k Common-Mode 50 k
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
Positive VO = 0V 2(V+) – 5 2(V+) – 4 ✽✽ V Negative VO = 0V 2(V–) + 5 2(V–) + 2 ✽✽ V
Common-Mode Rejection Ratio VCM = –25V to 25V, RS = 0 80 90 74 dB
OUTPUT VOLTAGE NOISE
(3)
RTO f = 0.1Hz to 10Hz 2.6 µVp-p f = 1kHz 52 nV/√Hz
GAIN
Initial 1 V/V Error V
O
= –13V to +13V ±0.02 ±0.05 ±0.1 %
vs Temperature ±1 ±10 ✽✽ppm/°C
Nonlinearity VO = –13V to +13V ±0.0001 ±0.001 ±0.002 % of FS
OUTPUT
Voltage, Positive (V+) – 2 (V+) – 1.8 ✽✽ V
Negative (V–) + 2 (V–) + 1.6 ✽✽ V Current Limit, Continuous to Common ±60 mA Capacitive Load (stable operation) 500 pF
FREQUENCY RESPONSE
Small-Signal Bandwidth –3dB 3.1 MHz Slew Rate 14 V/µs Settling Time: 0.1% 10V Step, C
L
= 100pF 2 µs
0.01% 10V Step, CL = 100pF 3 µs
Overload Recovery Time 50% Overdrive 3 µs
POWER SUPPLY
Rated Voltage ±15 V Operating Voltage Range ±4 ±18 ✽✽V Quiescent Current IO = 0mA ±2.4 ±2.9 ✽✽mA
TEMPERATURE RANGE
Specified –40 +85 ✽✽°C Operation –55 +125 ✽✽°C Storage –55 +125 ✽✽°C Thermal Resistance,
Θ
JA
SO-8 Surface-Mount 150 °C/W
Specifications the same as INA154U. NOTES: (1) Includes effects of amplifier’s input bias and offset currents. (2) 25k resistors are ratio matched but have ±20% absolute value. (3) Includes effects
of amplifier’s input current noise and thermal noise contribution of resistor network.
3
®
INA154
PIN CONFIGURATION
TOP VIEW SO-8
Supply Voltage, V+ to V– .................................................................... 40V
Input Voltage Range ......................................................................... ±80V
Output Short Circuit (to ground) ............................................. Continuous
Operating Temperature .................................................. –55°C to +125°C
Storage Temperature ..................................................... –55°C to +125°C
Junction Temperature .................................................................... +150°C
Lead Temperature (soldering, 10s) ............................................... +300°C
NOTE: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability.
ABSOLUTE MAXIMUM RATINGS
(1)
ELECTROSTATIC DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown recommends that all integrated circuits be handled with ap­propriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE SPECIFIED DRAWING TEMPERATURE PACKAGE ORDERING TRANSPORT
PRODUCT PACKAGE NUMBER
(1)
RANGE MARKING NUMBER
(2)
MEDIA
INA154U SO-8 Surface-Mount 182 –40°C to +85°C INA154U INA154U Rails
" " " " " INA154U/2K5 Tape and Reel
INA154UA SO-8 Surface-Mount 182 –40°C to +85°C INA154UA INA154UA Rails
" " " " " INA154UA/2K5 Tape and Reel
NOTES: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix C of Burr-Brown IC Data Book. (2) Models with a slash (/ ) are available only in Tape and Reel in the quantities indicated (e.g., /2K5 indicates 2500 devices per reel). Ordering 2500 pieces of “INA154U/2K5” will get a single 2500-piece Tape and Reel. For detailed Tape and Reel mechanical information, refer to Appendix B of Burr-Brown IC Data Book.
PACKAGE/ORDERING INFORMATION
Ref
–In
+In
V–
NIC
V+
Output
Sense
1
2
3
4
8
7
6
5
NC = No Internal Connection
Loading...
+ 6 hidden pages