Burnham Water Softener Systems User Manual
Water Softener Systems BS & BP
Steel Tanks
• Exchanges “soft” sodium ions for “hard calcium and
magnesium ions.
• BS —Model Range:
30-3/4 through BS-1200-3, twin or single
(30,000 grain at 8 GPM through 1,200,000
grain at 280 GPM).
• Available in alternating “twin” conguration with
ow meter and VIP computer demand controller or
“single” conguration with time clock regeneration.
Alternating twin system may be run in parallel
twin mode.
• Modular conguration to meet customer requirements
for alternating system includes: resin tanks, resin, gravel,
brine tank, control valve, blocking valves, ow meter
and VIP computer demand controller.
• VIP computer demand controller standard.
• BS—Resin Tanks:
Steel “polybond” lined and primed, pressure-tested
to 100 psig, non-code stamped (code stamped resin
tanks available).
• BP—Resin Tanks:
Fiberglass reinforced polyester, pressure-tested,
non-code stamped (code stamped resin tanks
NOT available).
• Provided with industry standard 30,000 grain per
cubic foot resin.
• Fleck control valve standard.
• BS—Skid mounting (pre-piped/pre-wired)
available as option.
• BP—Skid mounting NOT available.
Water Softener Systems BS & BP
CAP. MAX.
GRAINS (1,000)
Twin
Drawing
Number
900225-1 900252-1 32Z BS-30-.75 30 20 1 8 4 12 7 2 10 x 52 18 x 38 400 15 6
900225-3 900252-3 62A BS-60-1 60 40 2 17 15 24 20 3 12 x 52 18 x 38 400 30 12
900225-4 900252-4 92A BS-90-1 90 60 3 21 15 29 25 5 14 x 66 18 x 38 400 45 18
900226-1 900253-1 92B BS-90-1.5 90 60 3 24 9 36 16 5 14 x 66 18 x 38 400 45 18
900226-2 900253-2 122B BS-120-1.5 120 80 4 32 12 48 22 7 18 x 66 21 x 43 450 60 24
900226-3 900253-3 152B BS-150-1.5 150 100 5 40 13 58 25 7 18 x 66 21 x 43 450 75 30
900226-4 900253-4 182B BS-180-1.5 180 120 6 42 15 59 25 10 18 x 66 27 x 51 1000 90 36
900226-5 900253-5 212B BS-210-1.5 210 140 7 45 15 60 25 10 24 x 66 27 x 51 1000 105 42
900226-6 900253-6 242B BS-240-1.5 240 160 8 45 15 60 25 10 24 x 66 27 x 51 1000 120 48
900226-7 900253-7 272B BS-270-1.5 270 180 9 45 15 60 25 10 24 x 66 27 x 51 1000 135 54
900226-8 900253-8 302B BS-300-1.5 300 200 10 45 15 60 25 15 24 x 66 27 x 51 1000 150 60
900227-1 900254-1 122C BS -120-2 120 80 4 32 7 48 12 15 18 x 66 27 x 51 450 60 24
900227-2 900254-2 152C BS -150-2 150 100 5 40 6 60 11 15 18 x 66 27 x 51 450 75 30
900227-3 900254-3 182C BS -180-2 180 120 6 48 9 72 15 15 18 x 66 27 x 51 1000 90 36
900227-4 900254-4 212C BS -210-2 210 140 7 58 8 84 15 15 24 x 66 27 x 51 1000 105 42
900227-5 900254-5 242C BS -240-2 240 160 8 64 11 96 20 15 24 x 66 27 x 51 1000 120 48
900227-6 900254-6 272C BS -270-2 270 180 9 72 13 108 25 15 24 x 66 27 x 51 1000 135 54
900227-7 900254-7 302C BS -300-2 300 200 10 78 15 108 25 15 24 x 66 27 x 51 1000 150 60
900227-8 900254-8 452C BS -450-2 450 300 15 87 15 118 25 20 30 x 66 32 x 51 1500 225 90
900227-9 900254-9 602C BS -600-2 600 400 20 94 15 125 25 25 36 x 71 42 x 51 2500 300 120
900228-1 900255-1 602E BS-600-3 600 400 20 160 15 240 25 30 36 x 71 42 x 51 2500 300 120
900228-2 900255-2 902E BS-900-3 900 600 30 200 15 270 25 40 42 x 71 42 x 51 2500 450 180
900228-3 900255-3 1202E BS-1200-3 1200 800 40 210 15 280 25 50 48 x 71 52 x 60 4500 600 240
Single
Drawing
Number
Model
Model
Type
Number Max. Min.
CONTINUOUS PEAK
Cu. Ft.
per
GPM
Tank
Flow
PSI
Drop
GPM
Flow
Drain
PSI
Flow
Drop
Max. Resin Brine
TANK
DIMENSIONS
REGENERATION
Salt
Cap.
Lbs.
Max.
Lbs.
Min.
Lbs.
900245-1 900232-1 31Z BP-30-.75 30 20 1 8 4 12 7 2 9 x 48 18 x 38 400 15 6
900245-3 900232-3 61A BP-60-1 60 40 2 16 10 24 20 3 12 x 52 18 x 38 400 30 12
900245-4 900232-4 91A BP-90-1 90 60 3 21 15 29 25 5 14 x 65 18 x 38 400 45 18
900246-1 900233-1 91B BP-90-1.5 90 60 3 24 9 36 16 5 14 x 65 18 x 38 400 45 18
900246-2 900233-2 121B BP-120-1.5 120 80 4 32 11 48 20 7 17 x 58 21 x 43 450 60 24
900246-3 900233-3 151B BP-150-1.5 150 100 5 36 15 52 25 7 17 x 72 21 x 43 450 75 30
900246-4 900233-4 181B BP-180-1.5 180 120 6 38 15 56 25 7 17 x 72 27 x 51 1000 90 36
900246-5 900233-5 211B BP-210-1.5 210 140 7 45 15 60 25 15 24 x 71 27 x 51 1000 105 42
900246-6 900233-6 241B BP-240-1.5 240 160 8 45 15 60 25 15 24 x 71 27 x 51 1000 120 48
900246-7 900233-7 271B BP-270-1.5 270 180 9 45 15 60 25 15 24 x 71 27 x 51 1000 135 54
900246-8 900233-8 301B BP-300-1.5 300 200 10 45 15 60 25 15 24 x 71 27 x 51 1000 150 60
900247-1 900234-1 121C BP-120-2 120 80 4 32 6 48 10 7 17 x 58 21 x 43 450 60 24
900247-2 900234-2 151C BP-150-2 150 100 5 40 10 60 16 7 17 x 72 21 x 43 450 75 30
900247-3 900234-3 181C BP-180-2 180 120 6 48 9 72 23 7 17 x 72 27 x 51 1000 90 36
900247-4 900234-4 211C BP-210-2 210 140 7 56 8 84 15 15 24 x 71 27 x 51 1000 105 42
900247-5 900234-5 241C BP-240-2 240 160 8 64 11 96 20 15 24 x 71 27 x 51 1000 120 48
900247-6 900234-6 271C BP-270-2 270 180 9 72 13 108 25 15 24 x 71 27 x 51 1000 135 54
900247-7 900234-7 301C BP-300-2 300 200 10 78 15 108 25 15 24 x 71 27 x 51 1000 150 60
900247-8 900234-8 451C BP-450-2 450 300 15 87 15 118 25 20 30 x 72 32 x 51 1500 225 90
900247-9 900234-9 601C BP-600-2 600 400 20 94 15 125 25 25 36 x 72 42 x 51 2500 300 120
900248-1 900235-1 601E BP-600-3 600 400 20 160 14 240 24 25 36 x 72 42 x 51 2500 300 120
NOTE: Some ow rates are shown at a rate less than the standard 15 PSI drop for continuous and 25 PSI drop for decreased softening capacity as these ows are exceeded.
©2012 Burnham Commercial
P.O. Box 3939 • Lancaster, PA 17604
Phone: 888.791.3790 • Fax: 717.293.5803
www.burnhamcommercial.com
Form No. PL81465601013-12/12-1Mc
Printed in the U.S.A.
Loading...