Bunn Coffee Maker SINGLE SH DBC Parts Diagram

SINGLE ® SH DBC

WITH SMART FUNNEL

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, speciﬁ cations, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) All equipment other than as speciﬁ ed below: 2 years parts and 1 year labor.

2) Electronic circuit and/or control boards: parts and labor for 3 years.

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes ﬁ rst.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Ofﬁ ce Box 3227, Springﬁ eld, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN

are not authorized to make modiﬁ cations to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods speciﬁ ed above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost proﬁ ts, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

BUNN, SINGLE, DBC, and SMART FUNNEL are either trademarks or registered trademarks of Bunn-O-Matic Corporation.

34024 122005

TABLE OF CONTENTS

Base - Trunk - Hood - Covers & Panels ....................................................................................................................................... 4

Dispense Valve and Sprayhead .................................................................................................................................................. 16

Electrical Controls .....................................................................................................................................................................20

Faucet ........................................................................................................................................................................................ 18

Funnel .......................................................................................................................................................................................24

Numerical Index ........................................................................................................................................................................26

Strainer/Flow Control - Solenoid & Lines ..................................................................................................................................12

Tank and Mounting Brackets .....................................................................................................................................................10

Tank Heater & Overﬂ ow Protection Devices ................................................................................................................................8

Water By-Pass ........................................................................................................................................................................... 14

34024 012004

BUNN

BASE - TRUNK - HOOD - COVERS & PANELS

SINGLE SH

DBC

P2482.35

34024 122005

BASE - TRUNK - HOOD - COVERS & PANELS

ITEM PART NO. QTY. DESCRIPTION

1 25766.0000 1 Cover w/Decals, Top SST (Includes items 2 & 3)

25766.0001 1 Cover w/Decals, Top BLK (Includes items 2 & 3)

02336.0000 1 Screw, Truss Head #4 - 40 x .375"

2 25151.0000 1 Shield, Insulator

3 37881.0000 2 Decal, Warning "No Serviceable Parts"

4 00916.0000 1 Clip, J-Type #4 - 40

5 36404.1000 1 Hood w/Decals SST (Includes item 6)

36404.1001 1 Hood w/Decals BLK (Includes item 6)

02308.0000 7 Screw, Pan Head #8 - 32 x .375"

6 29973.0000 1 Membrane Switch

7 29891.1000 1 Trunk w/Decals SST (Includes items 8,9 & 24)

29891.1003 1 Trunk w/Decals BLK (Includes items 8,9 & 24)

8 00656.0000 1 Decal, Comply to Plumbing Code

9 00831.0000 1 Decal, Warning - Electrical

10 27744.1007 1 Panel w/Decals, SST 120 models (Includes items 3, 11 & 12)

27744.1001 1 Panel w/Decals, SST 120/240V models (Includes items 3, 11 & 12)

27744.1006 1 Panel w/Decals, BLK 120/240V models (Includes items 3, 11 & 12)

27744.1002 1 Panel w/Decals, 200V & 230V models (Includes items (3 & 12)

01382.0003 8 Screw, Truss Head Locking #6 - 32 x .375"

11 32043.0000 1 Schematic, Electrical 120/240V models

32043.0004 1 Schematic, Electrical 120V models

12 00658.0000 1 Decal, Caution - Decanter/Funnel

13 36407.0000 1 Cover, Server Platform

01382.0003 4 Screw, Truss Head Locking #6 - 32 x .375"

14 36406.1000 1 Base Housing w/Decals, SST 120V, 120/240V & 200V models (Includes item 15)

36406.1001 1 Base Housing w/Decals, 230V models (Includes item 15)

36406.0002 1 Base Housing, BLK 120/240V models

02308.0000 7 Screw, Pan Head #8 - 32 x .375"

15 20201.5600 1 Decal, Warning - Hot Water

16 27763.0000 1 Cover, Bottom SST 120V & 120/240V models

27763.0001 1 Cover, Bottom BLK 120/240V models

27763.0003 1 Cover, Bottom 230V models

27763.0004 1 Cover, Bottom 200V models

02308.0000 12 Screw, Pan Head #8 - 32 x .375"

17 26528.0000 4 Leg, 4.0" Plastic

18 03996.0000 4 Pad, Anti Skid

19 12249.0001 2 Guide Rail

00970.0000 4 Nut, Keps #8 - 32

See item 26

20 26207.0000 1 Plate, Tank Mounting

02308.0000 5 Screw, Pan Head #8 - 32 x .375"

(Continued)

34024 122005

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

BUNN

BASE - TRUNK - HOOD - COVERS & PANELS

(Continued)

SINGLE SH

DBC

P2482.35

34024 122005

BASE - TRUNK - HOOD - COVERS & PANELS

ITEM PART NO. QTY. DESCRIPTION

21 34020.0000 1 Plate, Decal Mounting

02308.0000 2 Screw, Pan Head #8 - 32 x .375"

22 32649.0000 1 Plate, Cover

00970.0000 2 Nut, Keps #8-32

23 00619.0000 1 Plug

24 00985.0000 1 Decal, Individual Circuit Info

25 21537.0001 2 Plate, Server Stop

01347.0000 4 Screw, #6-32 x .38"

26 36398.0000 1 Hole Plug, DB-9

27 13255.0003 - Leg Kit (Includes 4 each of items 17 & 18) (Not illustrated)

Models without Funnel Lock

34024 122005

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

BUNN

TANK HEATER & OVERFLOW PROTECTION DEVICES

SINGLE SH

DBC

6 5 4

7 8 9

P2483.60

34024 012004

TANK HEATER & OVERFLOW PROTECTION DEVICES

ITEM PART NO. QTY. DESCRIPTION

1 23717.0001 1 Thermostat, Limit

00908.0000 2 Nut, Hex #8 - 32

2 02536.0000 3 Grommet, Probe

3 20936.1000 1 Probe Kit (Includes items 4, 5 & 6)

4 01501.0000 1 Washer .164" I.D. x .375" O.D.

5 20203.0100 1 Lockwasher, Internal Tooth #8

6 00908.0000 1 Nut, Hex #8 - 32

7 12524.1000 1 Tank Heater 1800W @ 120V (Includes item 8)

12322.1000 1 Tank Heater 4000W @ 240V (Includes item 8)

12305.1000 1 Tank Heater 4000W @ 208V (Includes item 8)

12451.1000 1 Tank Heater 5000W @ 240V (Includes item 8)

00908.0000 4 Nut, Hex #8 - 32

8 12398.0002 1 Gasket, Tank Heater

9 26622.0001 1 Tube Assy, Vent

10 27473.0000 1 Bracket, Vent Tube

11 03803.0000 1 Switch Assy, Liquid Level, 120V,120/240V & 200V (Includes items 12, 13 & 14)

03803.0002 1 Switch Assy, Liquid Level, 230V (Includes items 12, 13 & 14)

00946.0000 1 Nut, Hex .125" FPT

12 03633.0000 2 Gasket, Float Switch (Only 1 used in this application)

13 - - - - - - - - 3 Washer, Adjusting (DO NOT USE IN THIS APPLICATION)

14 03807.0000 1 Clip, Spring

15 22728.0000 1 Overﬂ ow Cup Assy

00971.0000 2 Nut, Keps #10-32

16 12422.0000 2 Clamp, Hose .47"/.54" I.D.

17 - - - - - - - - 1 Tube, Silicone .312" I.D. x 29" (Order item 23)

18 - - - - - - - - 1 U-Channel 2.0" (Order item 24)

19 21801.0002 1 Tube .375" O.D. x 1.50" LG

20 20541.0001 1 Heat Sink, Aluminum

21 12565.0011 1 Triac Assy, 40 Amp (120V, 120/240V & 200V models)

12565.0013 1 Triac Assy, 40 Amp (230V models)

02328.0003 1 Screw, Pan Head #6-32 x .312"

01520.0000 1 Lockwasher #6

22 M2522.1000 - Heat Sink Compound (Not Illustrated)

23 03236.1001 - Tube, Silicone .312" I.D. x 36.0"

03236.1003 - Tube, Silicone .312" I.D. x 60.0"

03236.1002 - Tube, Silicone .312" I.D. x 120"

24 02434.1000 - U-Channel 18.0" (Use as required)

Not illustrated

34024 122005

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

+ 18 hidden pages