Bunn Coffee Maker Single Multi-BrewWISE DBC Parts Diagram

Single Multi-
BrewWISE DBC
WITH SMART FUNNEL
M
S
A
R
T
U
F
N
N
E
L
TM
BUNN
ICED TEA
ILLUSTRATED PARTS CATALOG
Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
37468.0000A 11/04 ©2004 Bunn-O-Matic Corporation
www.bunnomatic.com
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY
Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:
1) All equipment other than as specified below: 2 years parts and 1 year labor.
2) Electronic circuit and/or control boards: parts and labor for 3 years.
3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.
4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.
These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are
not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/ or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.
BUNN, Single, BrewWISE, MultiBrewWISE, DBC, G9-2T, MHG, Pre-Infusion, Pulse Brew, Smart Funnel, BUNNLink and
Smart Reader are either trademarks or registered trademarks of Bunn-O-Matic Corporation.
2
37468 110904
TABLE OF CONTENTS
Base - Trunk - Hood - Covers & Panels ...................................................................................................................................... 4
Dilution Valve & Lines ............................................................................................................................................................... 14
Dispense Valve and Sprayhead ................................................................................................................................................. 16
Electrical Controls .....................................................................................................................................................................20
Faucet ....................................................................................................................................................................................... 18
Funnel .......................................................................................................................................................................................24
Numerical Index ........................................................................................................................................................................26
Strainer/Flow Control, Tank Drain & Lines ................................................................................................................................12
Tank and Mounting Brackets.....................................................................................................................................................10
Tank Heater & Overflow Protection Devices ................................................................................................................................ 8
Warmers ...................................................................................................................................................................................22
3
37468 110904
BUNN
®
BASE - TRUNK - HOOD - COVERS & PANELS
Single Multi-
BrewWISE DBC
1
2
10
15
16
14
4
5
3
8
7
6
9
13
11
12
17 18
19
21
26
22
23
25
24
RE ONLY FOR
USE COPPER WI
POWER SUPPLY CONNECTIONS
20
AN
ON
AMPS
FOR USE ONLY
F) °
INDIVIDUAL BRANCH
C (194
°
CIRCUIT RATED 20
ections, Use No. 8 AWG
At Least 90
For Supply Conn
Wires Suitable For
27
28
29
P3272
4
37468 110904
BASE - TRUNK - HOOD - COVERS & PANELS
ITEM PART NO. QTY. DESCRIPTION
1 25312.0009 1 Cover, Top Warmer (Also order items 2, 3, 4 & 5)
02336.0000 1 Screw, Truss Head #4-40 x .38"
2 12364.0000 1 Decal, Caution - Warmers Are Hot
3 10044.0000 1 Decal, Warning - Shut Off Power
4 00916.0000 6 Fastener
5 25151.0000 1 Shield
6 01592.0001 1 Bushing, Snap
7 28382.0000 1 Clip, Cable
8 21104.0005 1 Server Stop
01382.0003 2 Screw, Truss Head #6-32 x .38"
9 32649.0000 1 Plate
00970.0000 2 Nut, Keps #8-32
10 36404.0000 1 Hood (Also order items 11, 12, & 13)
02308.0000 7 Screw, Pan Head #8-32 x .38"
11 29903.0001 1 Membrane Switch
12 20201.5600 1 Decal, Warning - Hot Water
13 00916.0000 1 Fastener
14 22981.0002 1 Trunk (Also order items 15, 16, 17 & 18)
02308.0000 7 Screw, Pan Head #8-32 x .38"
15 00831.0000 1 Decal, Warning - Electrical
16 00656.0000 1 Decal, Comply to Plumbing Code
17 00824.0000* 1 Decal, Ground
18 00985.0000 1 Decal, Individual Circuit Info
19 22987.0002 1 Cover (Also order item 20)
01382.0003 4 Screw, Truss Head #6-32 x .38"
20 00658.0000 1 Decal, Caution - Decanter/Funnel
21 28592.0003 1 Base
22 22979.0002 1 Cover, Bottom
02308.0000 12 Screw, Pan Head #8-32 x .38"
23 03354.0000 4 Leg, Adjustable
24 03011.0000 4 Plug, Vented 1.0" Dia.
(Continued)
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.
5
37468 110904
BUNN
®
BASE - TRUNK - HOOD - COVERS & PANELS
(Continued)
Single Multi-
BrewWISE DBC
1
2
10
15
16
14
4
5
3
8
7
6
9
13
11
12
17 18
19
21
26
22
23
25
24
USE COPPER WIRE ONLY FOR
POWER SUPPLY CONNECTIONS
20
AN
ON
AMPS
FOR USE ONLY
F) °
INDIVIDUAL BRANCH
C (194
°
CIRCUIT RATED 20
ections, Use No. 8 AWG
At Least 90
For Supply Conn
Wires Suitable For
27
28
29
P3272
6
37468 110904
BASE - TRUNK - HOOD - COVERS & PANELS
ITEM PART NO. QTY. DESCRIPTION
25 00619.0008 1 Plug, Hole 2.0" Dia.
26 02324.0000 2 Nut, Acorn
01311.0000 2 Screw, Truss Head #8-32 x .25"
27 21511.0004 1 Cover, Lower Warmer(Also order item 28)
28 12364.0000 1 Decal, Caution - Warmers Are Hot
29 21104.0003 1 Server Stop
01382.0003 2 Screw, Truss Head #6-32 x .38"
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.
7
37468 110904
BUNN
®
TANK HEATER & OVERFLOW PROTECTION DEVICES
1 10
6 5 4 3
Single Multi-
BrewWISE DBC
12
21
22
2
9 8
7
2
11
13
17
18
19
16
15
14
18
20
2
P3273
8
37468 110904
Loading...
+ 18 hidden pages