Bunn Coffee Maker RL35 User Manual
ITE M#
12 Cup Automatic Coffee Brewer
with 5 Warmers
Features
12 Cup Automatic Coffee Brewer
• Brews 7.5 gallons (28.4 litres) of perfect coffee per hour.
• Five separately controlled warmers.
• All stainless steel construction.
• Can also be operated as a pourover unit.
• Faucet kit available.
• SplashGard® funnel deflects hot liquids away from the hand.
Model RL 35
(5 warmers)
(decanters sold separately)
Dimensions: 23.5” H x 24” W x 18.5” D
(59.7cm H x 61cm W x 47cm D)
PROJECT
DATE
For current specification sheets and other information, go to www.bunn.com.
Related Products
Easy Clear® EQ-17-TL
Product No. : 30200.1000
Dimensions:
7
12
⁄
31.6 cm H x 6.35 cm W x 7.62 cm D
Easy Clear® ED-17-TL
Product No. : 30201.1001
Dimensions:
20.95 cm H x 5.87 cm Dia.
" H x 2
16
1
⁄
" W x 3" D
2
1
8
⁄
" H x 2
4
5
⁄
16
" Dia.
Model Agency Listing
RL35
Paper Filter Pack
Product No. : 20115.0000
Packed per case: 1,000
Dimensions:
10.8 cm Base x 6.98 cm Sidewall
U
L
LISTED
1
4
⁄4" Base x 23⁄
" Sidewall
4
Easy Pour® black decanter
Product No. : 06100.0101
Quantity: 1
quantities of 2, 3, 6, 12, & 24)
Easy Pour® orange decanter (for decaf)
Product No. : 06101.0101
Quantity: 1
quantities of 2, 3, 6, 12, & 24)
Patents Apply
(also packaged in
(also packaged in
10/09
A1.14
Dimensions & Specifications
8.0
5.0
2.4
14.00
2.03
18.5
Ø.875 HOLE
FOR POWER
SUPPLY
CONNECTION
23.5
1.55
24.00
20.84
Ø.875 HOLE FOR
POWER SUPPLY
CONNECTION
11.2
1.0
(1.25 MAX FOR
LEVELING MACHINE)
Model Product # Volts Amps Tank Heater Total Brewing Cu. Shipping Cord
Watts Watts Capacity Ft. Weight Attached
RL35 20825.0000 120/240 19.2 3500 4050 7.5 gal./hr. 9.3 44 lbs. No
Brewing capacity: based upon incoming water temp of 60ºF (140ºF rise) per 1/2 gallon brew time of 4 minutes.
Models listed as 120/208V or 120/240V must be connected to 208V or 240V electrical service respectively. Please refer to the installation manual.
Electrical: Model requires 3-wires plus ground service rated 120/240V (115/230, 120/208), single phase, 60 hz.
Plumbing: 10-90 psi (138-621 kPa). Supplied with
1
⁄4" OD male flare fitting.
Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches.
10/09 © Bunn-O-Matic Corporation
Loading...