Bunn Coffee Maker LPGA-2E Service Manual

INTERNATIONAL

ITE M#

Low Profile Portion Control Grinder with 2 Hoppers

Features

Portion Control Grinder

• Just 8.6” (21.84 cm) wide and a low proﬁle height of 17.5” (44.5cm).

• Professional grind provided by large 3.19” (8.1 cm) diameter burrs powered by quiet, low speed, high torque motor.

• Two hoppers allow for regular, decaf or specialty beans.

• Large, clear bean hoppers merchandise 3 lbs. (1.36 kg) each of fresh coffee beans.

• Easy access on back for grind weight adjustment.

• Three year warranty on grinding burrs.

PROJECT

DATE

LPG2E

(funnel sold separately)

Dimensions: 17.5”H x 8.6”W x 11”D

(44.5cm H x 21.84cm W x 27.94cm D)

For current speciﬁcation sheets and other information, go to www.bunn.com.

Related Products

Precision Burrs

All BUNN grinders use precision burrs to cut (not crush) the coffee beans and deliver consistent grind distribution. BUNN burrs are rated at a Rockwell hardness of 66C, resulting in an exceptionally long burr life.

Patents Apply

12/06

C1.5

Dimensions & Speciﬁcations

Model Product # Volts Amps Capacity Shipping Cord Agency Weight Attached

LPGA-2E 26800.0004 230 3.5 3 lbs. for each hopper 28 lbs. Yes (1.36 kg per hopper) (12.7 kg)

Funnel sold separately.

Electrical: Model requires 2-wires plus ground service rated 220-240V, single phase, 50/60 Hz.

Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springﬁeld, Illinois 62703 • USA • +1-217-529-6601 • Fax +1-217-529-2827 • www.bunn.com

BUNN® practices continuous product research and improvement. We reserve the right to change speciﬁcations and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

All dimensions shown in centimeters. Bunn-O-Matic Corporation owns all copyrights relating to materials in this publication. Please contact BUNN to request permission to reproduce any portion of this publication.