Page 1
BUNN
®
LPG
LPG-2E
N
Y
IO
R
T
U
J
U
N
I
D
.
A
L
D
C
A
R
N
A
CTS
.
RS AN
O
Z
E
G
S
A
BJE
R
H
PER
IN
E
P
O
P
N
PEN
F HO
O
EIG
EEP FING
K
OR
UTE
F
UT O
H
O
C
R
O
1. Place filter into funnel and slide funnel into rails.
2. Momentarily push the switch to "START" position.
3. Grinder will automatically stop when finished.
ILLUSTRATED PARTS CATALOG
Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
are subject to change without notice.
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
OFF/STOP
START
27092.0000 11/03 ©1996 Bunn-O-Matic Corporation
www.bunnomatic.com
Page 2
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY
Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:
1) All equipment other than as specified below: 2 years parts and 1 year labor.
2) Electronic circuit and/or control boards: parts and labor for 3 years.
3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.
4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis:
parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.
These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it
will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing
within the applicable warranty period. This warranty does not apply to any equipment, component or part that
was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration,
improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned
on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217)
529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN,
shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior
authorization from BUNN that the defective equipment is under warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN
are not authorized to make modifications to this warranty or to make additional warranties that are binding on
BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and
should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its
exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts
and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective
components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace
the equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE
OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S
SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales,
loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute
equipment, facilities or services, or any other special, incidental or consequential damages.
2
27092 040802
Page 3
TABLE OF CONTENTS
TITLE
PAGE NO.
Electrical and Operating Controls (Model LPG-2E) .................................................................................... 14
Electrical and Operating Controls (Model LPG) ......................................................................................... 16
Hopper and Lid Assembly (Model LPG-2E) ................................................................................................. 8
Hopper and Lid Assembly (Model LPG)..................................................................................................... 10
Housing and Panels (Model LPG-2E) .......................................................................................................... 4
Housing and Panels (Model LPG) ................................................................................................................ 6
Motor, Burr Housing and Components (Model LPG-2E) ........................................................................... 18
Motor, Burr Housing and Components (Model LPG) ................................................................................. 20
Numerical Index......................................................................................................................................... 22
Solenoid and Components (Model LPG-2E) .............................................................................................. 12
3
27092 061400
Page 4
BUNN
®
11 2
14
HOUSING AND PANELS (Model LPG-2E)
LPG-2E
LPG
3
1
9
8
4
5
13 12
Optional Legs
6
7
10
P1023.75
4
27092 112101
Page 5
HOUSING AND PANELS (Model LPG-2E)
ITEM PART NO. QTY. DESCRIPTION
1 29420.0002 1 Panel W/Decal, Rear (Includes items 2 & 9)
20617.1010 1 Panel W/Decal, Rear (Includes items 2,9 & 14) (LPGA-2E, 230V)
01315.0000 4 Screw, Truss Head #8-32 x .38".001
00917.0000 4 Fastener, “J” Type #8
2 27096.0000 2 Decal, Timer Knob
3 20573.0002 1 Housing, Hopper (Also order item 4)
01311.0000 4 Screw, Truss Head #8-32 x .25"
4 27095.0000 1 Decal, Hopper Housing
5 20585.0001 1 Support, Motor
02308.0000 3 Screw, Pan Head Serrated #8-32 x .38"
6 05839.0000 2 Rail, Funnel
02308.0000 4 Screw, Pan Head Serrated #8-32 x .38"
7 20591.1000 1 Housing W/Decals, Base (Includes item 8)
20591.1001 1 Housing W/Decals, Base (Models with optional legs)(Includes item 8)
8 20545.0000 1 Decal, Warning - Electrical
9 27103.0000 1 Schematic, Electrical
- - - - - - - - 1 Schematic, Electrical (LPGA-2E, 230V)
10 20704.0000 2 Pad, Base W/Adhesive Back (Not used on Models with Optional Legs)
11 28022.0000 1 Cover, Knob
12 28115.0000 2 Leg, Formed 3.50"
02337.0002 8 Screw, Hex Head #10-32 x .50" (Early Models)
02308.0000 8 Screw, Pan Head #8-32 x .38" (Late Models)
13 25137.0002 4 Foot, Rubber
02324.0000 4 Nut, Acorn #8-32
14 25151.0001 1 Shield, Insulator (LPGA-2E, 230V)
Optional
5
27092 112503
Page 6
BUNN
®
2 14 1 9 13
HOUSING AND PANELS (Model LPG)
LPG-2E
LPG
12
3
4
10
OFF/STOP
.
ils
a
r
to
.
l in
n
e
n
io
n
it
s
fu
o
e
p
"
lid
T
START
s
R
d
A
n
T
.
l a
S
d
e
"
e
n
o
h
n
t
is
h
fu
itc
fin
to
n
w
e
in
s
r
h
e
e
w
th
filt
p
h
e
to
s
c
u
s
la
p
lly
P
a
ily
r
.
tic
1
ta
a
n
e
m
m
to
o
u
M
ill a
.
2
r w
e
d
in
r
G
.
3
11
5
7
6
8
P1726
6
27092 061400
Page 7
HOUSING AND PANELS (Model LPG)
ITEM PART NO. QTY. DESCRIPTION
1 29420.0000 1 Panel W/Schematic, Rear, 120V (Models with Circuit Breaker)
29420.0001 1 Panel W/Schematic, Rear, 120V (Models with Capacitor)
20617.0004 1 Panel W/Schematic, Rear, 230V (Also order item 13)
20617.0000 1 Panel, Rear, 100V (Also order item 13)
20617.0008 1 Panel, Rear, 120V (Models with Black Decor)(Models with Capacitor)
20617.0011 1 Panel, Rear, 120V (Models with Black Decor)(Models with Circuit Breaker)
20617.0006 1 Panel, Rear, 230V (Models with Black Decor)
02322.0002 4 Screw, Truss Head #8-32 x .375" (Models with Black Decor)
01315.0000 4 Screw, Truss Head #8-32 x .375"
00917.0000 4 Fastener, “J” Type #8
2 00619.0008 1 Plug, 2" Dia. (Also order item 14)
3 20573.0000 1 Housing, Hopper (Models with Circuit Breaker)
29019.0000 1 Housing, Hopper (Models with Capacitor)
20573.0004 1 Housing, Hopper (Models with Black Decor)
02308.0000 4 Screw, Pan Head Serrated #8-32 x .375"
4 22303.0000 1 Decal, Hopper Housing
- - - - - - - - 1 Decal, Hopper Housing (Models with Black Decor)(Not available)
5 20585.0000 1 Support, Motor (Also order item 11)
02308.0000 5 Screw, Pan Head Serrated #8-32 x .38"
6 05839.0000 2 Rail, Funnel
02308.0000 4 Screw, Pan Head Serrated #8-32 x .38"
Also order items
4 and 12
Includes item 9
7 20591.1000 1 Housing w/Decal, Base (3.88" tall) SST (Includes item 8)
- - - - - - - - 1 Housing, Base (3.88" tall) BLK (Not available)
20595.7000 1 Housing, Base (5.88" tall) BLK
8 20545.0000 1 Decal, Warning - Electrical
9 10529.0000 1 Schematic, Electrical (120V)(Models with Circuit Breaker)
10529.0003 1 Schematic, Electrical (120V)(Models with Capacitor)
- - - - - - - - 1 Schematic, Electrical (230V)(Not serviced)
- - - - - - - - 1 Schematic, Electrical (100V)(Not serviced)
10 20704.0000 2 Pad, Base W/Adhesive Back
11 20727.0000 1 Insulation, Motor Support
12 20730.0000 1 Insulation, Hopper Housing (Models with Circuit Breaker)
20730.0001 1 Insulation, Hopper Housing (Models with Capacitor)
13 20729.0000 1 Insulation, Rear Panel
14 20728.0000 1 Insulation, Hole Plug
7
27092 102901
Page 8
BUNN
®
HOPPER AND LID ASSEMBLY (Model LPG-2E)
LPG-2E
LPG
1
2
3
4
7
8
5
6
P1024
8
27092 061400
Page 9
HOPPER AND LID ASSEMBLY (Model LPG-2E)
ITEM PART NO. QTY. DESCRIPTION
- 27076.1000 1 Hopper/Lid Assy (Includes items 1 thru 8)
1 00725.0000 2 Knob, Hopper Lid
2 26855.1000 1 Lid & Hinge Assy W/ Decals, Hopper (Includes item 3)
02328.0000 3 Screw, Pan Head Locking #6-32 x .38"
3 05876.0000 2 Decal, Caution
4 25997.0000 1 Divider, Hopper
01317.0000 2 Screw, Truss Head #8-32 x .50"
00991.0000 2 Nut, Elastic Lock #8-32
5 25994.0000 1 Brace, Divider
01315.0000 2 Screw, Truss Head #8-32 x .38"
01516.0000 2 Washer, Nylon-Retainer #8 x .312" O.D.
6 20751.0001 1 Hopper
01315.0000 4 Screw, Truss Head #8-32 x .3/8"
01516.0001 8 Washer, Nylon-Retainer #8 x .50" O.D.
00917.0000 4 Fastener, “J” Type #8
7 20694.0000 2 Bracket, Divider Mounting
01317.0000 2 Screw, Truss Head #8-32 x .50"
00991.0000 2 Nut, Elastic Lock #8-32
8 25996.0000 1 Bracket, Hopper Filler
01315.0000 4 Screw, Truss Head #8-32 x .38"
01516.0000 4 Washer, Nylon-Retainer #8 x .312" O.D.
9
27092 061400
Page 10
BUNN
®
HOPPER AND LID ASSEMBLY (Model LPG)
LPG-2E
LPG
1
N
Y
O
I
R
T
U
J
U
N
I
D
.
A
L
D
C
A
AN
R
N
A
CTS
RS
O
.
Z
E
S
A
R
H
ING
E
ING
PPER
OBJE
N
P
F
IGN
OPE
E
KEEP
T OF HO
FOR
U
HUTE
O
C
R
O
2
5
3
4
10
P1727
27092 061400
Page 11
HOPPER AND LID ASSEMBLY (Model LPG)
ITEM PART NO. QTY. DESCRIPTION
- 21233.0000 1 Hopper/Lid Kit (Includes items 1 thru 4)
1 27218.0000 1 Lid w/Decal, Hopper (Includes item 2)
02367.0000 4 Screw, Truss Head #6-32 x .625"
21129.0000 4 Washer
00991.0002 4 Nut, Elastic Lock #6-32
2 05876.0000 1 Decal, Caution
3 05966.0003 1 Hinge
01380.0000 4 Screw, Truss Head #6-32 x .50"
21129.0000 4 Washer
00991.0002 4 Nut, Elastic Lock #6-32
4 20751.0000 1 Hopper
01315.0000 4 Screw, Truss Head #8-32 x .375"
01516.0001 8 Washer, Nylon-Retainer #8 x .50" O.D.
00917.0000 4 Fastener, “J” Type #8
5 27101.0000 1 Guard, Hopper Burr
6 27119.0000 1 Hopper Burr Guard Kit (Includes item 5 and
two 20609.0001 mounting screws)
11
27092 061400
Page 12
BUNN
10 11 12 13 14 15 16
®
SOLENOID AND COMPONENTS (Model LPG-2E)
LPG-2E
LPG
1
2
18
21
20
19
22
4
3
17
5
9
6
5
8
7
9
23
12
P1025
27092 061400
Page 13
SOLENOID AND COMPONENTS (Model LPG-2E)
ITEM PART NO. QTY. DESCRIPTION
1 20611.0000 1 Gasket, Motor/Hopper
2 23976.0000 1 Ring, Retaining
01370.0000 3 Screw, Pan Head #8-32 x .75"
00970.0000 3 Nut, Keps #8-32
3 26854.0000 1 Divider, Burr Housing
4 26824.0000 1 Plate, Filler
5 23978.0000 2 Plate, Slide
6 23979.0000 1 Plate, Spacer
7 23983.0000 1 Ring, Mounting
8 27102.0000 1 Setscrew, Cup Point #10-32 x .38"
9 27089.0000 2 Pin, Dowel
10 05939.0005 2 Solenoid & Bracket Assembly
05939.0006 2 Solenoid & Bracket Assembly w/leads (LPGA-2E, 230V)
01311.0000 8 Screw, Truss Head #8-32 x .25"
11 23923.0000 2 Washer .063" Thick
12 27087.0000 2 Spring
13 23922.0000 2 Washer .035" Thick
14 27086.0000 2 Plunger, Solenoid
15 02858.0000 2 Pin, Spring .125" Dia.
16 23919.0000 2 Ring, Snap
17 26033.0001 2 Bearing, Snap-in
18 23975.0000 2 Bracket, Solenoid Mounting
19 21438.0002 2 Washer, Shoulder .203" I.D.
20 23982.0000 1 Plate, Solenoid Mounting
21 27088.0000 2 Washer, Nylon
22 24457.0000 2 Screw, Shoulder #8-32 x .125" Long
23 21484.0000 1 Setscrew, Burr Housing Divider Retaining, Cup Point #8-32 x .38"
13
27092 092701
Page 14
BUNN
®
ELECTRICAL AND OPERATING CONTROLS (Model LPG-2E)
1 2 14 3
4
LPG-2E
LPG
8 9 10 11
5
6
7
14
P1026
27092 061400
Page 15
ELECTRICAL AND OPERATING CONTROLS (Model LPG-2E)
ITEM PART NO. QTY. DESCRIPTION
1 27093.0000 1 Control Board, Timer (Includes items 9 and 10)
27093.0001 1 Timer, Dual Hopper (LPGA-2E, 230V)
00973.0000 4 Nut, Keps #6-32
2 01533.0004 4 Spacer, Nylon .14" I.D. x .25" O.D. x .19" Long
3 26950.0000 1 Bracket, Timer Board Mounting
26950.0001 1 Bracket, Timer Board Mounting (LPGA-2E, 230V)
02308.0000 2 Screw, Pan Head Serrated #8-32 x .38"
4 20987.0000 1 Circuit Breaker, 3 Amp
5 01309.0000 1 Screw, Power Cord Ground, Pan Head W/Terminal Washer #10-32 x .50"
6 05815.0000 1 Switch, OFF/ON/START
7 06536.0000 1 Switch, Hopper Selector
8 02239.0000 2 Knob, Timer
9 27348.0000 2 Nut .375"-32
10 01532.0001 2 Lockwasher, Internal Tooth
11 00707.0000 1 Bushing, Strain Relief
12 20630.0001 1 Cord Assy, Power(120V)
27728.0007 1 Cord Assy, Power (LPGA-2E) (230V)
13 27098.0000 1 Harness, Wiring
14 27655.0000 1 Shield, Circuit Board
Not Illustrated
15
27092 112101
Page 16
BUNN
2 1 11 10 4 9 7 8
®
ELECTRICAL AND OPERATING CONTROLS (Model LPG)
LPG-2E
LPG
3
5
6
16
P1728
27092 021703
Page 17
ELECTRICAL AND OPERATING CONTROLS (Model LPG)
ITEM PART NO. QTY. DESCRIPTION
1 20529.1000 1 Timer 120V (Includes item 2)
20529.1001 1 Timer 230V (Includes item 2)
02308.0000 2 Screw, Pan Head Serrated #8-32 x .375"
01516.0000 2 Washer
2 02239.0000 1 Knob, Timer (Includes setscrew)
02248.0000 1 Washer, Adhesive backed
3 20987.0000 1 Circuit Breaker, 3 Amp (Models without Capacitor)
4 01309.0000 1 Screw, Power Cord Ground, W/Terminal Washer #10-32 x .50" (120V)
01375.0000 1 Screw, Power Cord Ground, Brass #10-32 x .50" (230V)
01512.0000 1 Lockwasher, Ext-tooth #10 (230V)
5 11074.0000 1 Switch, OFF/START (Early Models)
05815.0000 1 Switch, OFF/ON/START (Late Models)
6 00707.0000 1 Bushing, Strain Relief (120V)
05746.0000 1 Bushing, Strain Relief (240V)
7 29020.0000 1 Capacitor (Models with Capacitor)
8 00637.0005 1 Shield (Models with Capacitor)
9 29021.0000 1 Bracket, Capacitor Mounting (Models with Capacitor)
00970.0000 1 Nut, KEPS #8-32
10 21878.0000 1 Plate, Terminal Block Mounting (230V)
11 01106.0001 1 Terminal Block (230V)
01317.0000 2 Screw, Truss Head #8-32 x .50"
12 20630.0001 1 Cord Assy, Power (120V and 100V)
28111.0002 1 Cord Assy, Power W/terminals (230V)
27728.0004 1 Cord Assy, Power W/O terminals (230V)
13 20624.0000 1 Harness, Main Wiring
20624.0002 1 Harness, Main Wiring (Models with Capacitor)
14 20657.0000 1 Harness, Switch Wiring
15 06064.0000 1 Label, Cord Warning (120V)
16 - - - - - - - - 1 Decal, Grounding (230V)(Not serviced)
17 21000.0282 1 Lead, BLK 7.00" (230V) Terminal Block to Black
Wire on Main Wiring Harness
18 21003.0058 1 Lead, BLK 5.00" (230V) Terminal Block to White
Wire on Main Wiring Harness
Not Illustrated
17
27092 021703
Page 18
BUNN
®
MOTOR, BURR HOUSING AND COMPONENTS (Model LPG-2E)
16
13
15
LPG-2E
LPG
1
2
OPTIONAL EXTRA FINE
DECHAFFER
10
12
3
4
5
6
7
8
9
11
13
18
14
P1027
27092 061400
Page 19
MOTOR, BURR HOUSING AND COMPONENTS (Model LPG-2E)
ITEM PART NO. QTY. DESCRIPTION
1 20576.0000 1 Cover, Motor
20609.0000 2 Screw, Flat Head #8-32 x .50"
2 25909.1000 1 Motor & Housing Assy (Includes Terminals)
25909.1001 1 Motor & Housing Assy (Includes Terminals) (LPGA-2E, 230V)
01326.0000 3 Screw, Truss Head #10-32 x .25"
3 -------------- 1 Burr, Upper (Order item 17)
20669.0000 2 Screw, Binding Head #10-32 x .29"
4 -------------- 1 Burr, Lower (Order item 17)
20669.0000 2 Screw, Binding Head #10-32 x .29"
5 20667.0000 1 Bushing, Spring Retainer
6 20666.0000 1 Spring, Burr Rotor
7 26043.0000 1 Rotor Assy (Includes item 6)
8 20670.0000 1 Disc, Load
9 20673.1000 1 Cap, Burr Housing (Includes item 10)
20672.0000 2 Screw, Fillister Head #10-32 x .62"
10 05880.0002 1 Decal, Grind Indicator
11 20671.1000 1 Screw, Burr Adjusting (Includes item 12)
12 05796.0000 1 Decal, Adjusting Screw
13 20588.0000 2 Spring Plate, Dechaffing
14 20572.0000 2 Support, Dechaffer
02336.0001 2 Screw, Truss Head #4-40 x .31"
15 33223.0000 2 Support, Dechaffer
02336.0003 2 Screw, Truss Head #4-40 x .68"
16 33222.0000 2 Support, Dechaffer
17 05861.1002 - Burr Kit (Includes items 3, 4 and Mounting Screws)
18 20620.0000 1 Burr Adjuster (Not Illustrated)
Optional. Models with
Extra Fine Dechaffer
19
27092 092701
Page 20
BUNN
®
MOTOR, BURR HOUSING AND COMPONENTS (Model LPG)
1
2
15
LPG-2E
LPG
10
12
3
4
5
6
7
8
9
11
13
14
20
P1738
27092 061400
Page 21
MOTOR, BURR HOUSING AND COMPONENTS (Model LPG)
ITEM PART NO. QTY. DESCRIPTION
1 20576.0000 1 Cover, Motor
20609.0001 2 Screw, Flat Head #8-32 x .625"
2 20646.1004 1 Motor & Housing Assy, High Output (120V)(Includes items 3 thru 15)
20646.1003 1 Motor & Housing Assy (230V)(Includes items 3 thru 15)
20646.1002 1 Motor & Housing Assy (100V)(Includes items 3 thru 15)
01326.0000 3 Screw, Truss Head #10-32 x .25"
3 -------------- 1 Burr, Upper (Order item 16)
20669.0000 2 Screw, Binding Head #10-32 x .29"
4 -------------- 1 Burr, Lower (Order item 16)
20669.0000 2 Screw, Binding Head #10-32 x .29"
5 20667.0000 1 Bushing, Spring Retainer
6 20666.0000 1 Spring, Burr Rotor
7 20668.0000 1 Rotor Assy (100V and 230V)
20668.0001 1 Rotor Assy, High Output (120V)
8 20670.0000 1 Disc, Load
9 20673.1000 1 Cap, Burr Housing (Includes item 10)
20672.0000 2 Screw, Fillister Head #10-32 x .625"
10 05880.0002 1 Decal, Grind Indicator
11 20671.1000 1 Screw, Burr Adjusting (Includes item 12)
12 05796.0000 1 Decal, Adjusting Screw
13 20588.0000 2 Spring Plate, Dechaffing
14 20572.0000 2 Support, Dechaffer
02336.0001 2 Screw, Truss Head #4-40 x .312"
15 20611.0000 1 Gasket
16 05861.1002 - Burr Kit (Includes items 3, 4 and Mounting Screws)
17 20620.0000 1 Burr Adjuster (Not Illustrated)
21
27092 040802
Page 22
NUMERICAL INDEX
PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO.
00619.0008 ......................... 7
00637.0005 ....................... 17
00707.0000 .................. 15,17
00725.0000 ......................... 9
00917.0000 .............. 5,7,9,11
00970.0000 .................. 13,17
00973.0000 ....................... 15
00991.0000 ......................... 9
00991.0002 ....................... 11
01106.0001 ....................... 17
01309.0000 .................. 15,17
01311.0000 .................... 5,13
01315.0000 .............. 5,7,9,11
01317.0000 .................... 9,17
01326.0000 .................. 19,21
01370.0000 ....................... 13
01375.0000 ....................... 17
01380.0000 ....................... 11
01512.0000 ....................... 17
01516.0000 .................... 9,17
01516.0001 .................... 9,11
01532.0001 ....................... 15
01533.0004 ....................... 15
02239.0000 .................. 15,17
02248.0000 ....................... 17
02308.0000 ............ 5,7,15,17
02322.0002 ......................... 7
02324.0000 ......................... 5
02328.0000 ......................... 9
02336.0001 .................. 19,21
02336.0003 ....................... 19
02337.0002 ......................... 5
02367.0000 ....................... 11
02858.0000 ....................... 13
05746.0000 ....................... 17
05796.0000 .................. 19,21
05815.0000 .................. 15,17
05839.0000 ...................... 5,7
05861.1002 .................. 19,21
05876.0000 .................... 9,11
05880.0002 .................. 19,21
05939.0005 ....................... 13
05939.0006 ....................... 13
05966.0003 ....................... 11
06064.0000 ....................... 17
06536.0000 ....................... 15
10529.0000 ......................... 7
10529.0003 ......................... 7
11074.0000 ....................... 17
20529.1000 ....................... 17
20529.1001 ....................... 17
20545.0000 ...................... 5,7
20572.0000 .................. 19,21
20573.0000 ......................... 7
20573.0001 ......................... 7
20573.0002 ......................... 5
20576.0000 .................. 19,21
20585.0000 ......................... 7
20585.0001 ......................... 5
20588.0000 .................. 19,21
20591.1000 ...................... 5,7
20591.1001 ......................... 5
20595.7000 ......................... 7
20609.0000 ....................... 19
20609.0001 ....................... 21
20611.0000 .................. 13,21
20617.0000 ......................... 7
20617.0004 ......................... 7
20617.0006 ......................... 7
20617.0008 ......................... 7
20617.0011 ......................... 7
20617.1010 ......................... 5
20620.0000 .................. 19,21
20624.0000 ....................... 17
20624.0002 ....................... 17
20630.0001 .................. 15,17
20646.1002 ....................... 21
20646.1003 ....................... 21
20646.1004 ....................... 21
20657.0000 ....................... 17
20666.0000 .................. 19,21
20667.0000 .................. 19,21
20668.0000 ....................... 21
20668.0001 ....................... 21
20669.0000 .................. 19,21
20670.0000 .................. 19,21
20671.1000 .................. 19,21
20672.0000 .................. 19,21
20673.1000 .................. 19,21
20694.0000 ......................... 9
20704.0000 ...................... 5,7
20727.0000 ......................... 7
20728.0000 ......................... 7
20729.0000 ......................... 7
20730.0000 ......................... 7
20730.0001 ......................... 7
20751.0000 ....................... 11
20751.0001 ......................... 9
20987.0000 .................. 15,17
21000.0282 ....................... 17
21003.0058 ....................... 17
21129.0000 ....................... 11
21233.0000 ....................... 11
21438.0002 ....................... 13
21484.0000 ....................... 13
21878.0000 ....................... 17
22303.0000 ......................... 7
23919.0000 ....................... 13
23922.0000 ....................... 13
23923.0000 ....................... 13
23975.0000 ....................... 13
23976.0000 ....................... 13
23978.0000 ....................... 13
23979.0000 ....................... 13
23982.0000 ....................... 13
23983.0000 ....................... 13
24457.0000 ....................... 13
25137.0002 ......................... 5
25151.0001 ......................... 5
25909.1000 ....................... 19
25909.1001 ....................... 19
25994.0000 ......................... 9
25996.0000 ......................... 9
25997.0000 ......................... 9
26033.0001 ....................... 13
26043.0000 ....................... 19
26824.0000 ....................... 13
26854.0000 ....................... 13
26855.1000 ......................... 9
26950.0000 ....................... 15
26950.0001 ....................... 15
27076.1000 ......................... 9
27086.0000 ....................... 13
27087.0000 ....................... 13
27088.0000 ....................... 13
27089.0000 ....................... 13
27093.0000 ....................... 15
27093.0001 ....................... 15
27095.0000 ......................... 5
27096.0000 ......................... 5
27098.0000 ....................... 15
27101.0000 ....................... 11
27102.0000 ....................... 13
27103.0000 ......................... 5
27119.0000 ....................... 11
27218.0000 ....................... 11
27348.0000 ....................... 15
27655.0000 ....................... 15
27728.0004 ....................... 17
27728.0007 ....................... 15
28022.0000 ......................... 5
28111.0002 ....................... 17
28115.0000 ......................... 5
29019.0000 ......................... 7
29020.0000 ....................... 17
29021.0000 ....................... 17
29420.0000 ......................... 7
29420.0001 ......................... 7
29420.0002 ......................... 5
33222.0000 ....................... 19
33223.0000 ....................... 19
22
27092 021703
Loading...