Bunn Coffee Maker ITCB TWIN HV Parts List

RELEASED FOR PRODUCTION

ITCB-DV HV

ITCB TWIN HV

Infusion Series

®

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, specifi cations, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: [phone] FAX: [phone]

44196.0400B 01/15 ©2014 Bunn-O-Matic Corporation

DIR Num: 44196.0400 19, May 2015

RELEASED FOR PRODUCTION

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, ther­mal servers and ThermoFresh® servers (mechanical and digital) 1 year parts and 1 year labor.

2) All other equipment - 2 years parts and 1 year labor plus added warranties as specifi ed below:
a) Electronic circuit and/or control boards - parts and labor for 3 years.
b) Compressors on refrigeration equipment - 5 years parts and 1 year labor.
c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and
labor for 4 years or 40,000 pounds of coffee, whichever comes fi rst.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be
commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the
applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured
by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation,
improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality,
damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but
not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN
prompt notice of
any claim to be made under this warranty by telephone at [phone] or by writing to Post Offi ce Box
3227, Springfi eld, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized
BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX­PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make

modifi cations to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such
individuals, whether oral or written, do not constitute warranties and should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive op­tion while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the
applicable parts and labor warranty periods specifi ed above) to repair the defective components, provided that this repair
is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for
the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS
EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION
AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profi ts, lost sales, loss of
use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities
or services, or any other special, incidental or consequential damages.

392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, Brew­WISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with
the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design,
Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet
Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment
Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com,
Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in
Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage
Bar Creator, Beverage Profi t Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic
Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture
Prompted Cleaning, Pouring Profi ts, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either
trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta® brewer housing confi gura­tion is a trademark of Bunn-O-Matic Corporation.

2

44196.1 031314

DIR Num: 44196.0400 19, May 2015

RELEASED FOR PRODUCTION

TABLE OF CONTENTS

COVERS AND PANELS ..................................................................................................................................4

TANK AND COMPONENTS .......................................................................................................................... 6

TANK FILL/DRAIN AND DILUTION ................................................................................................................8

DISPENSE/BYPASS VALVES, SPRAYHEAD, & FAUCET ............................................................................. 10

ELECTRICAL AND OPERATING CONTROLS .............................................................................................. 14

FUNNELS .................................................................................................................................................. 18

NUMERICAL INDEX

.................................................................................................................................. 20

To order coffee fi lters, water fi lters, or other accessories, refer to Specifi cation Sheets at www.bunn.com

Fraction Decimal Fraction Decimal

1/16 0.063 9/16 0.563

1/8 0.125 5/8 0.625

3/16 0.188 11/16 0.688

1/4 0.250 3/4 0.750

5/16 0.313 13/16 0.813

3/8 0.375 7/8 0.875

7/16 0.438 15/16 0.938

1/2 0.500 1 1.000

3

DIR Num: 44196.0400 19, May 2015

44196.1 062012

RELEASED FOR PRODUCTION

22

13

12

14

23

COVERS AND PANELS

ITCB HV

Series

4

6

7

2

3

1

10

11

3

9

20

21

17

18

24

8

19

5

2

12

13

14

20

4

5

6

7

Early models

3

1

10

3

11

5

21

15

24

19

* Indicates the part number listed is for reference only.

DIR Num: 44196.0400 19, May 2015

8

16

17

18

4

44196.1 020614

RELEASED FOR PRODUCTION

COVERS AND PANELS

ITEM PART NO. QTY. QTY. DESCRIPTION
TWIN SINGLE

1 36639.0013 - 1 Hood, SST - Single

37920.0109 1 - Hood, SST - Twin

02308.0000 20 10 Screw, Pan Head #8-32 x .375˝

2 36355.1009 - 1 Cover, Top Single (Includes 3, 4) (1 Screw)

36355.1021 - 1 Cover, Top Single (Includes 3, 4) (2 Screws) (Shown)

37870.1006 1 - Cover, Top Twin (Includes 3, 4)

01308.0003 2 1 Screw, Truss Head BLK #6-32 x .25˝

3 37881.0000 2 2 Decal, No Serviceable Parts

4 25151.0002 - 1 Shield, Insulator

25151.0003 1 - Shield, Insulator

5 43828.0000 - 1 Schematic, DV

43828.0002 - 1 Schematic, DV (w/Triacs)

43828.0003 - 1 Schematic, (w/Triacs) CE Only

44145.0000 1 - Schematic, Twin

44145.0001 1 - Schematic, Twin (w/Triacs)

6 36608.0001 - 1 Bracket, Upper Tank Support, Single

01317.0003 - 2 Screw, Truss Head #8-32 x .375˝

37967.0000 1 - Bracket, Upper Tank Support, Twin

01308.0002 2 Screw, Truss Head #6-32 x .25˝

7 39453.1007 - 1 Trunk, Single 29.0˝ SST (Includes 12-14) for side use w/side faucet

39453.0009* - 1 Trunk, Single 29.0˝ SST (CE ONLY) Not available

39455.1005 1 - Trunk, Twin SST 29˝ (w/Side Faucet) (Includes 12-14)

02308.0000 10 8 Screw #8-32 x .375˝

8 39450.1001 - 1 Panel, Front Single (Includes 3, 9-11)

39541.1003 1 - Panel, Front, Twin (Includes 3, 10, 11)

01311.0001 8 8 Screw, Truss Head, Locking #8-32 x .25˝ (SST)

9 29710.0011 - 1 Decal, Optional Field Wiring (ICB-DV Only)

10 00658.0000 1 1 Decal, Warning-Decanter/Funnel

11 39175.0000 1 1 Decal, Warning Overlay Graphic

12 00656.0001 1 1 Decal, Compliance To Plumbing Code

13 00986.0000 1 1 Decal, Warning-Electrical

14 34072.0000 - 1 Decal, Power Cord Warning Single

38125.0000 1 - Decal, Warning-Plug (125/250V) Twin

15 39596.0001 1 - Lower Tank Support (Twin)

02308.0000 4 4 Screw #8-32 X .375˝

16 39599.0000 1 - Bracket, Tank Support (Twin)

02308.0000 4 - Screw #8-32 x .375˝

17 39615.0001 - 1 Base, Single

39615.0003 - 1 Base, Single (w/Triacs)

39615.0004 - 1 Base, Single (w/Triacs) CE Only

39594.0003 1 - Base, Twin

39594.0005 1 - Base, Twin (w/Triacs)

01317.0003 8 4 Screw, Truss Head #8-32 x .375˝ Sides of Bases (For future use)

18 25137.0001 6 4 Foot

Continued on next page

* Indicates the part number listed is for reference only.

DIR Num: 44196.0400 19, May 2015

5

44196.1 012715

RELEASED FOR PRODUCTION

22

13

12

14

23

COVERS AND PANELS

ITCB HV

Series

4

6

7

2

3

1

10

11

3

9

20

21

17

18

24

8

19

5

2

12

13

14

20

4

5

6

7

Early models

3

1

10

3

11

5

21

15

24

19

* Indicates the part number listed is for reference only.

DIR Num: 44196.0400 19, May 2015

8

16

17

18

6

44196.1 020614

RELEASED FOR PRODUCTION

COVERS AND PANELS

ITEM PART NO. QTY. QTY. DESCRIPTION
TWIN SINGLE

19 43820.0000 2 1 Rail, Left

43820.0001 2 1 Rail, Right

00970.0000 8 4 Nut, Keps #8-32

20 29007.0000 2 2 Decal, Hot Water

21 00619.0007 2 2 Plug, Hole .50˝ Dia.

22 00619.0005 - 1 Plug, Hole .062˝ Dia.

23 00669.0002 - 1 Plug, Hole-Nyl Blk .50˝ Dia

24 47384.0001 - 1 Bracket, Heatsink (Single)

47562.0001 1 - Bracket, Heatsink (Twin)

02308.0000 3 2 Screw, Pan Head #8-32 x .375˝

01592.0001 1 - Bushing, Snap In 1.188˝ (Twin Only)

25 38704.0004 - 1 Flip Tray Assembly Includes Decal

38578.0000 - 1 Decal, Anti Skid

29504.0005 - 6 Shoulder Screw #8-32 x .29˝

00991.0000 - 6 Nut, Elastic Lock #8-32 SST

* Indicates the part number listed is for reference only.

DIR Num: 44196.0400 19, May 2015

7

44196.1 020614