Bunn Coffee Maker ITB-DD User Manual

Infusion Dual Dilution 3 Gallon Iced Tea Brewer

Features

Infusion Dual Dilution 3 Gallon Iced Tea Brewer

• Large tank provides back-to-back brewing capacity and allows 3 or 5 gallon (11.4 to 18.9 litre) tea batches.

• Brews 16.3 to 26.7 gallons (61.7 to 101.1 litres) per hour from real tea leaves.

• Meet your volume needs; brew 3 gallons (11.4 litres) of iced tea into each dispenser and serve up to 6 gallons (22.7 litres) within a narrow footprint.

• Speciﬁcally designed to accommodate and brew into two BUNN 3.5 gallon narrow tea dispensers (can also brew directly into standard tea dispensers).

• Includes rotating brew basket, base platform adapter, dedicated dilution nozzles and brew selection switch.

• Color coded decals help the operator properly align the brew basket, dispenser and choose the correct selection.

• Three recipe buttons and full/half options for maximum ﬂexibility.

• Includes two button graphic overlay for customizing the user interface.

• Digital temperature control, pre-infusion, pulse brew and cold brew lockout.

• SplashGard® funnel deﬂects hot liquids away from the hand.

• Includes Quickbrew (Q) funnel tip for easy conversion.

ITE M#

PROJECT

DATE

Sweetener Model Features

• Left side preset with sweetener valve.

Model ITB Dual Dilution with

(2) TDO-N-3.5 Dispensers

(dispensers sold separately)

Dimensions: 34” H x 12.2” W x 22.6”D

(86.4cm H x 30.9cm W x 57.4cm D)

• Dilution nozzles labeled “Sweet” and “Unsweet.”

• Each brew button’s sweetener may be independently set and easily adjusted using the Sweet Meter.

• “Out of Sweetener” indicator - LCD blinks to aid operator.

• Separate inlet for sweetener - use existing CO2 systems or external third party pump for sweetener delivery.

For current speciﬁcation sheets and other information, go to www.bunn.com.

Related Products

Easy Clear® EQHP-Tea

Product No. : 39000.0007

Easy Clear® EQHP-TEACRTG

Replacement Cartridge Product No. : 39000.1007

Single/Dual Filter Pack

Product No. : 20100.0000 Packed per case: 500 Dimensions:

13.34 cm Base x 9.52 cm Sidewall

51⁄4" Base x

33⁄4" Sidewall

TDO-N-3.5 – Tea Dispenser

Product No. : 39600.0001 Capacity: 3.5 gallons Weight: 12.3 lbs. Dimensions:

21.6” H x 6.2” W x 13.5” D

59.4cm H x 15.7cm W x 34.3cm D

TD4T – Dual Reservoir Tea Dispenser

Product No. : 03250.0032 Capacity: 4 gallons Weight: 14.5 lbs. Dimensions: 22” H x 9.1” W x 15.7” D

55.9cm H x 23.1cm W x 39.9cm D

TB6 Funnel

Product No. : 03021.0013

TB6Q Funnel

Product No. : 03021.0014

Model Agency Listing

ITB, DUAL DILUTION

LISTED

9/10

B13

Dimensions & Speciﬁcations

Model Product # Volts Amps Tank Heater Total Brewing Cubic Shipping Cord Watts Watts Capacity Measure Weight Attached

ITB, Dual Dilution 41400.0002 120 14 1680 1700 16.3 gal./hr.* 8.8 ft ITB, Dual Dilution 41400.0003 120 14 1680 1700 16.3 gal./hr.* 8.8 ft

†

w/sweetener

Power cord (NEMA 5-15P) 15 Amp-120V machine only.

44 lbs. Yes

* Hourly capacity of 16.3 gallons is for standard funnel tip and delayed dilution. Capacity may be increased to 26.7 gallons/hour using “Q” quick brew funnel tip and no dilution delay.

Electrical: Models require 2-wires plus ground service rated at 120V, single phase, 60 Hz.

Plumbing: 20-90 psi (138-621 kPa). Machine supplied with 1⁄4" OD male ﬂare ﬁtting. Requires minimum of 1 gpm water ﬂow.

†

7.15

12.15

WATER SUPPLY CONNECTION .250 OD FLARE

34.37

22.88

1.93

maximum dispenser depth: 13.4” (TD4T)

5.02

19.04

22.57

Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springﬁeld, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com

BUNN® practices continuous product research and improvement. We reserve the right to change speciﬁcations and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

All dimensions shown in inches.