Bunn Coffee Maker ITB Parts List

ITB

Infusion Series

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, speciﬁ cations, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

42437 050511

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) All equipment other than as speciﬁ ed below: 2 years parts and 1 year labor.

2) Electronic circuit and/or control boards: parts and labor for 3 years.

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes ﬁ rst. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Ofﬁ ce Box 3227, Springﬁ eld, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN

are not authorized to make modiﬁ cations to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods speciﬁ ed above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost proﬁ ts, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages. 392, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, A Partner You Can Count On, Air Brew, Air Infusion, Beverage Bar Creator, Beverage Proﬁ t Calculator, Brew better, not bitter., BUNNSource, Coffee At Its Best, Cyclonic Heating System, Digital Brewer Control, Nothing Brews Like a BUNN, Pouring Proﬁ ts, Signature Series, Tea At Its Best, Phase Brew, The Horizontal Red Line, trifecta, Ultra, Velocity Brew are either trademarks or registered trademarks of Bunn-O-Matic Corporation.

TABLE OF CONTENTS

Hood, Trunk, Base and Panels.............................................................................................................................4

Tank and Components.........................................................................................................................................6

Dispense Valve and Sprayhead ...........................................................................................................................8

Fill, Dilution & Tank Drain..................................................................................................................................10

Sweetener .........................................................................................................................................................12

Electrical and Operating Controls ......................................................................................................................14

Funnels .............................................................................................................................................................16

Numerical Index ................................................................................................................................................18

ITCB-DV ................................................................................................................. Dual Voltage Machine

ITCB-C-DV ........................................................................................... Dual Voltage Machine for Canada

ITCBA ............................................................................................................................ 230 Volt Machine

ITCBB ............................................................................................................................ 200 Volt Machine

Fraction Decimal Fraction Decimal

1/16 0.063 9/16 0.563

1/8 0.125 5/8 0.625

3/16 0.188 11/16 0.688

1/4 0.250 3/4 0.750

5/16 0.313 13/16 0.813

3/8 0.375 7/8 0.875

7/16 0.438 15/16 0.938

1/2 0.500 1 1.000

42437 121710

To order coffee ﬁ lters, water ﬁ lters, or other accessories, refer to Speciﬁ cation Sheets at www.bunn.com

ITB

SERIES

HOOD, TRUNK, BASE AND PANEL

P4171.30

9 11 13

DUAL DILUTION

SINGLE DILUTION

9 11 13

LOW PROFILE

42437 122410

ITEM PART NO. QTY. DESCRIPTION

* Indicates the part number listed is for reference only.

HOOD, TRUNK, BASE AND PANEL

1 36355.1006 1 Cover, Top (Includes items 24 & 25)

01308.0000 1 Screw, Truss Head #6-32 x .25"

2 36354.0004 1 Hood (ITB & ITB-LP Only)

36354.0005 1 Hood (Dual Dilution Models Only)

02308.0000 8 Screw, Pan Head #8-32 x .38"

3 36353.1007 1 Trunk w/Decals 29" Single Dilution (Includes items 4 & 14)

36353.1027 1 Trunk w/Decals 29" Dual Dilution (Includes items 4 & 14)

36594.0003 1 Trunk SST (Low Proﬁ le Models) (Includes items 4 & 14)

02308.0000 6 Screw, Pan Head #8-32 x .38"

4 00658.0000 1 Decal, Warning - Decanter/Funnel

5 36356.1206 1 Panel w/Decals 29.0" SST (7 mtg. hole) (Includes items 14,15 & 24)

36997.1001 1 Panel, Back (Low Proﬁ le Models Only)

01311.0001 7 Screw, Truss Head #8-32 x .25" (1 less used on Low Proﬁ le)

6 42377.0000 1 Schematic, ITB (All Models)

7 00986.0000 1 Decal, Warning - Electrical

8 00656.0001 1 Decal, Comply to Plumbing Code

9 36362.0002 1 Base (Standard Models)

36923.0003 1 Base (Low Proﬁ le Models)

10 25137.0001 4 Foot

24600.0000 - Foot Kit, Set of 4

11 36412.0000 1 Rail, Stop

00970.0000 2 Nut, Keps #8-32

12 36461.0000 1 Guide Rail, Left

00970.0000 2 Nut, Keps #8-32

13 36462.0000 1 Guide Rail, Right

00970.0000 2 Nut, Keps #8-32

14 39175.0000 1 Decal, Warning Overlay Graphic

15 37881.0000 2 Decal, No Serviceable Parts

16 25151.0000 1 Shield, Insulator (Adhesive Back)

17 34118.0001 1 Bracket, Tank Support

01317.0003 2 Screw, Truss Head #8-32 x .375˝

18 38589.0000 1 Decal, Sweet

19 38589.0001 1 Decal, Unsweet

20 41948.0000 1 Decal, Nozzle Left

21 41948.0001 1 Decal, Nozzle Right

22 37573.0000 1 Decal, Decorative

23 36877.0001 1 Panel, Bottom

02332.0002 8 Screw, Hex #6 x .375˝

24 26528.0001 4 Leg, 4.0” Adjustable

25 03996.0000 4 Pad, Non-Skid

26 37538.0001 1 Stop, Dispenser Front

01311.0001 2 Screw, Truss Head #6-32 x .25˝

27 37804.0000 1 Screw, Ground

28 00824.0002 1 Decal, Ground

42437 011711

ITB

SERIES

TANK & COMPONENTS

P2888

42437 092210

+ 12 hidden pages