Bunn Coffee Maker ITB Installation Manual

ITB/ITCB

ITCB-DV HV

ITCB TWIN HV

Infusion Series

INSTALLATION & OPERATING GUIDE

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

To ensure you have the latest revision of the Operating Manual, or to view the Illustrated Parts Catalog, Programming Manual, or Service Manual, please visit the Bunn-O-Matic website, at www.bunn.com. This is absolutely FREE, and the quickest way to obtain the latest catalog and

manual updates. For Technical Service, contact Bunn-O-Matic Corporation at 1-800-286-6070.

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, thermal servers and ThermoFresh® servers (mechanical and digital) 1 year parts and 1 year labor.

2) All other equipment - 2 years parts and 1 year labor plus added warranties as speciﬁed below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) Compressors on refrigeration equipment - 5 years parts and 1 year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for 4 years or 40,000 pounds of coffee, whichever comes ﬁrst.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Ofﬁce Box 3227, Springﬁeld, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make

modiﬁcations to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods speciﬁed above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost proﬁts, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage Bar Creator, Beverage Proﬁt Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture Prompted Cleaning, Pouring Proﬁts, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta® brewer housing conﬁguration is a trademark of Bunn-O-Matic Corporation.

36748.3 031314

INTRODUCTION

ITB

This equipment will brew tea into an awaiting dispenser or reservoir.

The ITB uses recipe settings to brew tea. It has an LCD for digital readout and programming. The user is able to select regular or quick brew for tea programming. Other features include Pre-Infusion and Pulse Brew, quick and standard brew, Energy Savings mode, BUNNLink compatible, Freshness Timer, Sanitation Alert, and brew counters. Available in low proﬁle, dual dilution and sweetener models.

ITCB-DV/ITCB-DV HV

This equipment will brew either tea or coffee into an awaiting dispenser or reservoir. It can be easily conﬁgured for 120V or 120/208V-120/240V (Refer to data plate for speciﬁc ratings). The brewer may have an auxiliary hot water faucet that can be mounted on the front, left or right side.

ITCB HV TWIN

This equipment will brew either tea or coffee into an awaiting dispenser or reservoir in either the left or right side brewing station. The brewer may have an auxiliary hot water faucet that can be mounted on the front, left or right side.

This equipment is only for indoor use on a sturdy counter or shelf.

The Infusion Series combines BrewWISE, CDBC and Tea Brewers into one. ITCB is able to brew both tea and coffee with recipe settings. It has an LCD for digital readout and programming along with the Smart Funnel options for coffee. The user is able to select regular or quick brew for tea programming. Other features include: Pre-Infusion, Pulse Brew, quick and standard brew, and BrewWISE, Energy Savings mode, BUNNLink compatible, Smart Reader compatible, Freshness Timer, Sanitation Alert, and sweetener with low product detection.

CONTENTS

Warranty .............................................................................................................2

Introduction ........................................................................................................3

User Notices .......................................................................................................4

Electrical Requirements (ITB/ITCB-DV) ...............................................................5

Electrical Requirements (ITCB-DV HV/TWIN) .....................................................6

Plumbing Requirements/Optional Sweetener ......................................................7

Operating Controls ..............................................................................................8

Initial Set-Up .......................................................................................................9

Tea Brewing ......................................................................................................10

Coffee Brewing ..................................................................................................10

Cleaning/Tank Drain ..........................................................................................11

Sanitizing Optional Sweetener ...........................................................................12

Programming ....................................................................................................13

ITB ................................................................................................................... 120V Infusion Tea Brewer

ITBA ................................................................................................................................ 220 Volt Brewer

ITB-DD ................................................................................................................................. Dual Dilution

ITB-LP ...................................................................................................................... Low Proﬁle Machine

ITCB-DV ................................................................................................................................Dual Voltage

ITCB-DV HV .................................................................................................... Dual Voltage High Volume

ITCB-C-DV ..............................................................................................Dual Voltage Brewer for Canada

ITCBA .............................................................................................................................. 230 Volt Brewer

ITCBB .............................................................................................................................. 200 Volt Brewer

TWIN ................................................................................................................................2 Brew Stations

36748.3 100114

USER NOTICES

Carefully read and follow all notices in this manual and on the equipment. All labels on the equipment should be kept in good condition. Replace any unreadable or damaged labels.

As directed in the International Plumbing Code of the International Code Council and the Food Code Manual of the Food and Drug Administration (FDA), this equipment must be installed with adequate backflow prevention to comply with federal, state and local codes. For models installed outside the U.S.A., you must comply with the applicable Plumbing /Sanitation Code for your area.

#00656.0001

#00824.0002

WARNING

• DO NOT OVERLOAD CIRCUIT.

• ALWAYS ELECTRICALLY GROUND THE CHASSIS.

• DO NOT DEFORM PLUG OR CORD.

• FOLLOW NATIONAL AND LOCAL ELECTRICAL CODES.

• KEEP COMBUSTIBLES AWAY.

FAILURE TO COMPLY RISKS EQUIPMENT

DAMAGE, FIRE OR SHOCK HAZARD.

READ THE ENTIRE

OPERATING MANUAL BEFORE

USING THIS PRODUCT

#00986.0000 ITCB

! CAUTION

For 120/208V or 120/240 volt operation, replace Power Supply Cord only with Bunn-O-Matic part number 01699.0000.

#34072.0000 ITCB

Incorrect programming could result in accidental dispensing of HOT LIQUID.

Trained personnel are to follow instructions provided for software programming.

Use of additional graphic layer requires disabling of appropriate switches.

Read all instructions for additional graphic layer prior to installing and programming.

! WARNING

#39175.0000

Risk of Fire. Use a UL listed grounding type attachment plug, rated 125/250 Vac, 30 A, 1 phase, 4 conductor. Plug to be selected and installed only by qualified service personnel.

#38125.0000 TWIN

#00658.0000

To reduce the risk of electric shock, do not remove or open cover. No user-serviceable parts inside. Authorized service personnel only. Disconnect power before servicing.

37881.0000

#03408.0000

#03409.0000

WARNING !

Fill water tank before turning - on - thermostat or connecting appliance to power source. Use only on a properly protected circuit capable of the rated load. Electrically ground the chassis. Follow national/local electrical codes. Do not use near combustibles.

FAILURE TO COMPLY RISKS EQUIPMENT

DAMAGE, FIRE, OR SHOCK HAZARD

READ THE ENTIRE OPERATING MANUAL

BEFORE BUYING OR USING THIS PRODUCT

THIS APPLIANCE IS HEATED WHENEVER

CONNECTED TO A POWER SOURCE

#00831.0000 ITB

#41995.0000 ITB DD

36748.3 112912

ELECTRICAL REQUIREMENTS ITB & ITCB-DV

POWER CORD

Refer to Data Plate on the Brewer, and local/national electrical codes to determine circuit requirements.

“Optional Field Wiring ratings are located on the machine near the dataplate.”

WARNING - The brewer must be disconnected from the power source until speciﬁed.

WARNING - The power cord must be UL Listed, Flexible Cord Type SO, SJO, SJTO, HSJO or SJOW, Rated 90°

C, and the attachment plug cap must be UL Listed, in order to avoid a hazard. The Power Supply Cord must be at least 3 feet long and maximum 6 feet long (measured from Strain Relief to end of the Attachment Plug Cap).

ITB - 120V models require 2-wire, grounded service rated 120 volts AC, 15 amp, single phase, 60Hz.

L2 RED L2 RED

WHITE

NEUTRAL

L1 BLACK

WHITENEUTRAL

GREEN

WHITE

NEUTRAL

L1 BLACK

WHITENEUTRAL

GREEN

POWER CORD

120/208-240V 3 WIRE + GROUND 120V 2 WIRE + GROUND

ITCB DV

ONLY

DUAL VOLT

TOGGLE SWITCH

L2 RED L2 RED

L1 BLACK

240V 2 WIRE + GROUND

L2 RED NEUTRAL BLUE

L1 BLACK

220-240V 2 WIRE + GROUND

L1 BLACK

L1 BROWN

GREEN

GREEN/YELLOW

ELECTRICAL HOOK-UP (All Models)

CAUTION – Improper electrical installation will damage electronic components. Damage caused by incor-

rect electrical connections is not covered by warranty.

1. An electrician must provide electrical service.

2. Determine the available on-site electrical service.

3. (Steps 3 & 9 apply to DV models only) Select the desired unit voltage based on the available on-site elec-

trical service.

4. Using a voltmeter, check the voltage and color coding of each conductor at the electrical source.

5. Remove the back panel to gain access to the terminal block.

6. Feed the power cord through the strain relief and connect it to the terminal block(s).

7. Connect the power cord to the terminal block as shown.

8. Before proceeding, verify the voltage at the ﬁeld wiring terminal block.

9. Set voltage switch to the appropriate position and replace the access panel.

10. If plumbing is to be hooked up later be sure the brewer is disconnected from the power source. If plumb-

ing has been hooked up, the brewer is ready for Initial Set-Up.

36748.3 041714

ELECTRICAL REQUIREMENTS ITCB-DV HV & TWIN

POWER CORD

Refer to Data Plate on the Brewer, and local/national electrical codes to determine circuit requirements.

“Optional Field Wiring ratings are located on the machine near the dataplate.”

WARNING - The brewer must be disconnected from the power source until speciﬁed.

WARNING - The power cord must be UL Listed, Flexible Cord Type SO, SJO, SJTO, HSJO or SJOW, Rated 90° C,

and the attachment plug cap must be UL Listed, in order to avoid a hazard. The Power Supply Cord must be at least 3 feet long and maximum 6 feet long (measured from Strain Relief to end of the Attachment Plug Cap).

ITCB HV TWIN - requires 3-wire, grounded service rated 120/208-240 volts AC, 30 amp, single phase,

60Hz.

ITCB-DV HV - 120V models require 2-wire, grounded service rated 120 volts AC, 15 amp, single phase,

60Hz. or 3-wire, grounded service rated 120/208-240 volts AC, 20 amp, single phase, 60Hz.

ITCB-DV HV & TWIN ITCB-DV HV ONLY

L2 RED L2 RED

WHITE

NEUTRAL L1 BLACK

L1 BLACK

WHITENEUTRAL

GREEN

WHITE

NEUTRAL L1 BLACK

L1 BLACK

WHITENEUTRAL

GREEN

POWER CORD

120/208-240V 3 WIRE + GROUND 120V 2 WIRE + GROUND

Terminal

Block

L2 RED L2 RED

L1 BLACK

GREEN

240V 2 WIRE + GROUND

ITCB-DV HV

DUAL VOLT

TOGGLE SWITCH

L2 RED NEUTRAL BLUE

L1 BLACK

230V 2 WIRE + GROUND

L1 BROWN

GREEN/YELLOW

ITCB-DV HV TWIN

ELECTRICAL HOOK-UP (All Models)

CAUTION – Improper electrical installation will damage electronic components. Damage caused by incor-

rect electrical connections is not covered by warranty.

1. An electrician must provide electrical service.

2. Determine the available on-site electrical service.

3. (Steps 3 & 9 apply to DV models only) Select the desired unit voltage based on the available on-site electrical service.

4. Using a voltmeter, check the voltage and color coding of each conductor at the electrical source.

5. Remove the front panel to gain access to the terminal block.

6. Feed the power cord through the strain relief and connect it to the terminal block.

7. Connect the power cord to the terminal block as shown.

8. Before proceeding, verify the voltage at the ﬁeld wiring terminal block.

9. Set voltage switch to the appropriate position and replace the access panel.

10. If plumbing is to be hooked up later be sure the brewer is disconnected from the power source. If plumbing has been hooked up, the brewer is ready for Initial Set-Up.

36748.3 041714

+ 12 hidden pages