Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:
1) All equipment other than as specifi ed below: 2 years parts and 1 year labor.
2) Electronic circuit and/or control boards: parts and labor for 3 years.
3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.
4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis:
parts and labor for 3 years or 30,000 pounds of coffee, whichever comes fi rst.
These warranty periods run from the date of installation. BUNN warrants that the equipment manufactured by
it will be commercially free of defects in material and workmanship existing at the time of manufacture and
appearing within the applicable warranty period. This warranty does not apply to any equipment, component or
part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect,
alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is
conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone
at (217) 529-6601 or by writing to Post Offi ce Box 3227, Springfi eld, Illinois 62708-3227; 2) if requested by
BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior
authorization from BUNN that the defective equipment is under warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR
ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN
are not authorized to make modifi cations to this warranty or to make additional warranties that are binding on
BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and
should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its
exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts
and/or labor (during the applicable parts and labor warranty periods specifi ed above) to repair the defective
components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace
the equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF
THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S
SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profi ts, lost sales,
loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute
equipment, facilities or services, or any other special, incidental or consequential damages.
2
38527 103105
TABLE OF CONTENTS
TITLE PAGE NO.
Auger Drive and Hopper Assembly ...............................................................................................................................................12
Covers, Panels and Drip Tray ..........................................................................................................................................................4
Dispense Valves and Lines ............................................................................................................................................................20
Door, Lamp, Dispense Switches and Panels ...................................................................................................................................8
Mixing/Whipper Chambers and Drive Motor .................................................................................................................................14
Numerical Index ............................................................................................................................................................................26
Tank, Heater and Overfl ow Protection ...........................................................................................................................................16
3
38527 103105
COVERS, PANELS AND DRIP TRAY
1 3 2
4 5 6 7 8
IMIX-5S
9
41
40
39
9
10
11
12 13 14 15
16
17
18
19
20
21
22
23
24
25
26
38 37 36 35 34 33 32 31 30 29 28 27
4
P3534
38527 103105
COVERS, PANELS AND DRIP TRAY
ITEM PART NO. QTY. DESCRIPTION
1 35916.0001* 1 Cover, Top Rear - BLK
01311.0003 2 Screw, Truss Head BLK #8-32 x .25"
2 35915.0001* 1 Cover, Top Front - BLK
01311.0003 2 Screw, Truss Head BLK #8-32 x .25"
01382.0002 2 Screw, Truss Head BLK #6-32 x .375"
3 28368.0000 1 Decal, Thermostat Adjustment
4 35926.0000 4 Bracket, Side Support
01311.0001 8 Screw, Truss Head - Locking #8-32 x .25"
5 35927.0002 1 Panel, Inner Rear
01311.0001 6 Screw, Truss Head - Locking #8-32 x .25"
6 36232.0000 1 Panel, Inner Access
01311.0000 2 Screw, Truss Head #8-32 x .25"
7 36648.0000 1 Strap, Top Support
01311.0001 4 Screw, Truss Head - Locking #8-32 x .25"
8 36230.0001 1 Panel, Inner Right
01311.0001 2 Screw, Truss Head - Locking #8-32 x .25"
9 35912.0001 2 Panel, Side
01311.0003 6 Screw, Truss Head BLK #8-32 x .25"
10 34666.0000 1 Catch, Door Latch
02336.0000 2 Screw, Truss Head #4-40 x .375"
11 35929.0002 1 Panel, Whipper Motor
01311.0001 6 Screw, Truss Head - Locking #8-32 x .25"
12 00619.0010 1 Plug, Hole .438" Nkl. Pltd.
13 28872.0000 1 Decal, Increase/Decrease Switch
14 26523.0000 1 Decal, Rinse/Run Switch
15 26524.0000 1 Decal, Tank Heater Switch
16 36235.0000* 1 Tray, Powder Box
17 37988.0000 2 Screw, Captive #10-32 x .50"
34998.0000 2 E-Ring, Retaining .127" OD
18 36644.0000 1 Bracket, Door Locking (Right side)
36644.0001 1 Bracket, Door Locking (Left side)
01311.0001 2 Screw, Truss Head - Locking #8-32 x .25"