Bunn Coffee Maker iMIX-3S User Manual

ITE M#

iMIX® Silver Series® Hot Beverage System with 3 Hoppers

Features

iMIX Silver Series Hot Beverage System

• Capacity: three, 8-pound (3.6 kg) hoppers.

• Large, lighted front graphics for merchandising.

Top hinged, lift door models available.

iMIX-3S

Dimensions: 32.8”H x 12.6” W x 24.1” D

(83.3cm H x 32cm W x 61.2cm D)

Dimensions: 32.8”H x 12.6” W x 24.1” D

iMIX-3S

(83.3cm H x 32cm W x 61.2cm D)

For current speciﬁcation sheets and other information, go to www.bunn.com.

• 4.4-gallon (16.7L) hot water tank to meet peak serving times.

• Cup clearance at 7.25” (18.4 cm) to accommodate popular cup sizes [adjustable to 8.12” (20.6 cm)].

• Variable speed motors allow control of product consistency in mixing chamber (.75 to 6.6 grams of powder per second).

• Key service components easily accessible through front and top.

• Easily removable side panels for complete access to service components.

• High speed, heavy-duty whipper for complete product mixing.

• Front of machine access to tank drain, dump valves, auger and whipper motors and control board for easy service.

• Key lock on the door prevents tampering.

• Contemporary styling for striking visual statement.

• Spring-loaded, all metal auger drive system for easy hopper installation.

• Front of machine set up and calibration.

• Top hinged, lift door model available.

• Preventive maintenance kit: 32906.0000.

Additional features with iMIX Silver Series Plus

• Can be set as push and hold or single size portion control.

• Alphanumeric display allows adjustments and service operational testing from front of machine. Also communicates advertising messages, machine status and technical support contact information.

• Iced Coffee display available.

• Preventive maintenance kit: 32906.0001.

PROJECT

DATE

Related Products

Easy Clear® EQHP-10

Product No. : 39000.0004

Easy Clear

Product No. : 39000.0001

EQHP-10L

Model Agency Listing

iMIX-3S, iMIX 3S+

Features deluxe whipper chambers:

1. Robust whipper to ensure full ﬂavor yield.

2. Specially designed self cleaning mixing chamber.

3. Exhaust fan to siphon off moisture that can cause powder buildup.

4. Hot water dispense for easy clean-out.

5. Quick disconnecting parts for thorough sanitizing.

Replacement Displays

Standard Cappuccino (shown above)

Product No. : 37457.0000

Chai Tea

Product No. : 37457.0001

Hot Chocolate

Product No. : 37457.0002

Steamers

Product No. : 37457.0003

Iced Cappuccino

Product No. : 37457.0006

7/10

D5.3

Dimensions & Speciﬁcations

4.00

43.06

39.81

4.00

5.75

35.14

32.8

18.49

23.32

33.4

12.46

32.8

30.19

Model Product # Volts Amps Watts Capacity Cubic Shipping Cord Measure Weight Attached

iMIX-3S 38600.0000 120 15 1800 4.5 gal/hr 8.3 ft

(Cappuccino display)

iMIX-3S 38600.0051 120 15 1800 4.5 gal/hr 8.3 ft3 90 lbs Yes*

(Top hinged, lift door, Cappuccino display)

iMIX-3S+ 38600.0001 120 15 1800 4.5 gal/hr 8.3 ft3 90 lbs Yes*

(Cappuccino display)

iMIX-3S+ 38600.0050 120 15 1800 4.5 gal/hr 8.3 ft3 90 lbs Yes*

(Top hinged, lift door, Cappuccino display)

iMIX-3S+ 38600.0006 120 15 1800 4.5 gal/hr 8.3 ft3 90 lbs Yes*

(Iced Coffee display)

*Power cord (NEMA 5-15P) 15 Amp-120V machine only. **Special order models available with door hinges on right side.

Burst Capacity: 36 - 12 oz. servings in 14 minutes. (to -10˚F (-23.3˚C) peak serving temperature)

Electrical: 120V model requires 2-wires plus ground service rated 120V, single phase, 60 Hz.

Plumbing: 20-100 psi (138-690 kPa) from a

/4” (6.4 mm) or larger supply line. A shut-off valve should be installed in the line

before the unit. Install a regulator in line when pressure is greater than 90 psi to reduce it to 50 psi. Supplied with

/4” (6.4 mm) male ﬂare ﬁtting.

90 lbs Yes*

top hinged model

side view

side hinged model

side views

Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springﬁeld, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com

BUNN® practices continuous product research and improvement. We reserve the right to change speciﬁcations and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

All dimensions shown in inches.