Bunn Coffee Maker ICB TWIN Parts Diagram

ICB TWIN

Infusion Series™

with Smart Funnel

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, speciﬁcations, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) All equipment other than as speciﬁed below: 2 years parts and 1 year labor.

2) Electronic circuit and/or control boards: parts and labor for 3 years.

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes ﬁrst.

These warranty periods run from the date of installation. BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Ofﬁce Box 3227, Springﬁeld, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN

are not authorized to make modiﬁcations to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods speciﬁed above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost proﬁts, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

BUNN, Infusion Series, iCB TWIN, Smart Funnel, BUNNLink, are either trademarks or registered trademarks of Bunn-

O-Matic Corporation.

38112.2 040405

TABLE OF CONTENTS

Dispense Valve, Bypass Valve & Sprayhead .......................................................................................................................................... 8

Electrical & Operating Controls ........................................................................................................................................................... 14

Faucet & Lines .................................................................................................................................................................................... 10

Funnels ............................................................................................................................................................................................... 18

Housing, Trunk, Base and Panels .......................................................................................................................................................... 4

Numerical Index .................................................................................................................................................................................. 20

Tank and Components .......................................................................................................................................................................... 6

Water Inlet, Tank Drain & Vent Lines ................................................................................................................................................... 12

38112.2 041205

BUNN

HOUSING, TRUNK, BASE AND PANELS

ICB-TWIN

P3464.50

38112.2 041205

HOUSING, TRUNK, BASE AND PANELS

ITEM PART NO. QTY. DESCRIPTION

1 37870.1000 1 Cover, Top (Includes items 2 & 3)

01308.0000 2 Screw, Truss Head #6-32 x .25"

2 37881.0000 2 Decal, No Serviceable Parts

3 25151.0000 1 Sheild, Insulator

4 37920.0000 1 Hood

02308.0000 20 Screw, Pan Head #8-32 x .38"

5 37874.0000 1 Gasket

6 37827.1001 1 Bezel, Control Panel (Includes items 7 & 8)

02308.0000 8 Screw, Pan Head #8-32 x .38"

7 37877.0000 1 Decal, Top

8 - - - - - - - - 1 Membrane Switch (See ELECTRICAL & OPERATING CONTROLS)

9 37274.0001 2 Server Stop

02308.0000 4 Screw, Pan Head #8-32 x .38"

01503.0000 4 Washer

10 37866.0000 1 Base

11 25137.0001 6 Foot

12 37926.0000 1 Spacer

13 36361.0000 2 Trim, Base Cover

01308.0002 4 Screw, Truss Head, Locking #6-32 x .25"

02332.0002 4 Screw, Hex #6 x .38"

14 37865.1000 1 Panel, Front (Includes items 2, 15, & 16)

01311.0001 6 Screw, Truss Head, Locking #8-32 x .25"

15 37299.0001 1 Electrical Schematic

16 00658.0000 1 Decal, Warning - Decanter/Funnel

17 37951.1000 1 Trunk (Includes items 18, 19, & 20)

02308.0000 10 Screw, Pan Head #8-32 x .38"

18 00656.0000 1 Decal, Comply to Plumbing Code

19 00986.0000 1 Decal, Warning - Electrical

20 38125.0000 1 Decal, Warning - Plug 125/250V

38125.0001 1 Decal, Warning - Plug 125/208V

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

38112.2 041205

BUNN

TANK & COMPONENTS

ICB-TWIN

P3465.60

38112.2 040405

+ 14 hidden pages