Bunn Coffee Maker ICBC Parts List
ICBA, ICBB,ICBC,
ICB-DV, ICB Twin
Infusion Series
with Smart Funnel
Supercedes Illustrated Parts Catalogs:
37078.0000; 38112.0002
®
®
ILLUSTRATED PARTS CATALOG
Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
are subject to change without notice.
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
39830.0000K 10/12 ©2006 Bunn-O-Matic Corporation
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY
Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:
1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal servers
and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor.
2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below:
a) Electronic circuit and/or control boards - parts and labor for 3 years.
b) Compressors on refrigeration equipment - 5 years parts and 1 year labor.
c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts
and labor for 4 years or 40,000 pounds of coffee, whichever comes first.
These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be
commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the
applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured
by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation,
improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality,
damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but
not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN
prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office
Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an
authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under
warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make
modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such
individuals, whether oral or written, do not constitute warranties and should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the
applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair
is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for
the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS
EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION
AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of
use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities
or services, or any other special, incidental or consequential damages.
392, A Partner You Can Count On, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized
red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth,
DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High
Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide,
Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro,
Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage
Equipment Worldwide, ThermoFresh, Titan, trifecta, Velocity Brew, Air Brew, Air Infusion, Beverage Bar Creator, Beverage Profit Calculator, Brew better, not bitter., BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital
Brewer Control, Element, Nothing Brews Like a BUNN, Pouring Profits, Signature Series, Tea At Its Best, The Horizontal
Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta®
brewer housing configuration is a trademark of Bunn-O-Matic Corporation.
2
39830 080112
TABLE OF CONTENTS
HOOD ASSEMBLIES .....................................................................................................................................4
TRUNKS ........................................................................................................................................................6
BASES ...........................................................................................................................................................8
TANK AND COMPONENTS ........................................................................................................................ 10
TANK FILL/DRAIN .......................................................................................................................................12
DISPENSE/BYPASS VALVES, SPRAYHEAD, & FAUCET ............................................................................. 14
ELECTRICAL AND OPERATING CONTROLS .............................................................................................. 18
FUNNELS .................................................................................................................................................. 24
NUMERICAL INDEX .................................................................................................................................. 26
To order coffee filters, water filters, or other accessories, refer to Specification Sheets at www.bunn.com
ICB-DV ......................................................................................................................Dual Voltage Brewer
ICBA ................................................................................................................................ 230 Volt Brewer
ICBB ................................................................................................................................ 200 Volt Brewer
ICBC-DV .................................................................................................... Canadian Dual Voltage Brewer
Fraction Decimal Fraction Decimal
1/16 0.063 9/16 0.563
1/8 0.125 5/8 0.625
3/16 0.188 11/16 0.688
1/4 0.250 3/4 0.750
5/16 0.313 13/16 0.813
3/8 0.375 7/8 0.875
7/16 0.438 15/16 0.938
1/2 0.500 1 1.000
3
39830 061407
HOOD ASSEMBLIES
ICB Series
4
6
1
2
4
2
3
5
6
3
* Indicates the part number listed is for reference only.
P3820.50
4
39830 120811
HOOD ASSEMBLIES
ITEM PART NO. QTY. QTY. DESCRIPTION
TWIN SINGLE
1 36639.0005 - 1 Hood, SST - 19.9˝ Depth
36639.0006 - 1 Hood, BLK - 19.9˝ Depth
36639.0007 - 1 Hood, SST - 20.7˝ Depth (Models w/funnel lock only)
37920.0002 1 - Hood, SST - 21.8˝ Depth
37920.0003 1 - Hood, BLK - 21.8˝ Depth
37920.0006 1 - Hood, SST - 19.8˝ Depth
37920.0007 1 - Hood, BLK - 19.8˝ Depth
02308.0000 20 10 Screw, Pan Head #8-32 x .38˝
2 37870.1000 1 - Cover, Top (Includes 5-7) (For use with 21.8˝ Hood)
37870.1004 1 - Cover, Top (Includes 5-7) (For use with 19.8˝ Hood)
36355.1006 - 1 Cover, Top - 19.9˝ (Includes 5-6)
36355.1013 - 1 Cover, Top - 20.7˝ (Includes 5-6) (Models w/funnel lock only)
01308.0003 2 1 Screw, Truss Head BLK #6-32 x .25˝
3 37881.0000 - 1 Decal, No Serviceable Parts
4 25151.0002 - 1 Shield, Insulator
25151.0003 1 - Shield, Insulator
5 37299.0001 1 - Schematic, 120/240V
37299.0004* 1 - Schematic, 230V
6 37967.0000 1 - Bracket, Tank Support, Twin (Upper)
01308.0002 2 Screw, Truss Head #6-32 x .25˝
36608.0001 - 1 Bracket, Tank Support, Single
01317.0003 - 2 Screw, Truss Head #8-32 x .375˝
* Indicates the part number listed is for reference only.
5
39830 120811
TRUNKS
ICB Series
Tall Twin Shown
Trunk with flange facing
front for 21.8˝ hood shown
1
12
13
8
9
10
Early model trunks with first type
Water Inlet Valve are obsolete-
order new style as listed
2
4
5
6
Tall Single Shown
1
16
New style trunk &
front panel for use
with 19˝ hood.
-TWINS ONLY-
15 14
2
3
4
5
6
7
9
11
8
16
* Indicates the part number listed is for reference only.
P3821.50
6
39830 041510
TRUNKS
ITEM PART NO. QTY. QTY. DESCRIPTION
TWIN SINGLE
1 36637.1004 - 1 Trunk, 20.8" SST (Includes 8,9,12,13) w/Rocker Sw.
36637.1005 - 1 Trunk, 20.8" BLK (Includes 8,9,12,13) w/Rocker Sw.
36637.1006 - 1 Trunk, 20.8” SST (Includes 8,9,12,13) w/Toggle Sw.
36637.1007 - 1 Trunk, 20.8” BLK (Includes 8,9,12,13) w/Toggle Sw.
39453.1000 - 1 Trunk, 29.0" SST (Includes 8,9,12,13) w/Rocker Sw.
39453.1001 - 1 Trunk, 29.0” SST (Includes 8,9,12,13) w/Toggle Sw.
37951.1004 1 - Trunk, 20.8" BLK (125/250V) (Includes 8-10,13) (For use with 21.8˝ Hood)
37951.1005 1 - Trunk, 20.8" SST (125/250V) (Includes 8-10,13) (For use with 21.8˝ Hood)
37951.1105 1 - Trunk, 20.8” SST (125/250V) (Includes 8-10,13) (For use with 19.8˝ Hood)
37951.1106 1 - Trunk, 20.8” BLK (125/208V) (Includes 8-10,13) (For use with 19.8˝ Hood)
39455.1000 1 - Trunk, 29.0" SST (125/250V) (Includes 8-10,13) (For use with 21.8˝ Hood)
39455.1002 1 - Trunk, 29.0” SST (125/250V) (Includes 8-10,13) (For use with 19.8˝ Hood)
02308.0000 10 8 Screw #8-32 x .38"
2 36643.1000 - 1 Panel, SST, 20.8" (ICB-DV) (Includes 3-7)
36643.1001 - 1 Panel, SST, 20.8" (ICBA, B, & CE) (Includes 5 & 7)
36643.1002 - 1 Panel, BLK, 20.8" (ICB-DV) (Includes 3-7)
39450.1000 - 1 Panel, SST 29.0" (ICB-DV) (Includes 3-7)
37865.1000 1 - Panel, SST 20.8" (Standard Twin) (For use with 21.8˝ Hood) (Includes 4-7)
37865.1001 1 - Panel, BLK 20.8" (Standard Twin) (For use with 21.8˝ Hood) (Includes 4-7)
37865.1002 1 - Panel, SST 20.8” (Standard Twin) (For use with 19.8˝ Hood) (Includes 4-7)
37865.1003 1 - Panel, BLK 20.8” (Standard Twin) (For use with 19.8˝ Hood) (Includes 4-7)
39541.1000 1 - Panel, SST 29.0" (Tall Twin) (For use with 21.8˝ Hood) (Includes 4-7)
39541.1002 1 - Panel, SST 29.0” (Tall Twin) (For use with 19.8˝ Hood) (Includes 4-7)
01311.0001 6 6 Screw, Truss Head, Locking #8-32 x .25" (SST)
01311.0004 6 6 Screw, Truss Head, Locking #8-32 x .25" (BLK)
3 29710.0011 - 1 Decal, Optional Field Wiring (ICB-DV Only)
29710.7011 - 1 Decal, Optional Field Wiring (ICBC-DV Only)
4 00658.0000 1 1 Decal, Warning-Decanter/Funnel
5 39175.0000 1 1 Decal, Warning Overlay Graphic
6 37881.0000 1 1 Decal, No User Serviceable Parts
7 37299.0000 - 1 Schematic, ICB-DV
8 00656.0001 1 1 Decal, Compliance To Plumbing Code
9 00986.0000 1 1 Decal, Warning-Electrical
10 38125.0000 1 - Decal, Warning-Plug (125/250V)
11 34072.0000 - 1 Decal, Power Cord Warning (ICB-DV Only)
12 39596.0001 1 - Lower Tank Support (Tall Twin)
37953.0002 1 - Lower Tank Support (Std. Twin)
02308.0000 4 4 Screw #8-32 x .38"
13 39599.0000 1 - Bracket, Tank Support (Tall Twin Only)
02308.0000 4 - Screw #8-32 x .38"
14 07038.0000 1 - Terminal Block 120V/240V
01317.0000 2 - Screw, Truss Head #8-32 x .50"
15 37804.0000 1 - Screw, Grounding #8-32 x .50"
Twins from
May 18, 2007
and later
16 36398.0000 1 1 Hole Plug, DB-9 (Early Models Only)
7
* Indicates the part number listed is for reference only.
39830 121211
BASES
ICB Series
Early style bases obsolete
4
5
4
1
Tall Twin
Tall Single
2
1
Standard Single
3
Standard Twin
* Indicates the part number listed is for reference only.
P3822.50
8
39830 061407
BASES
ITEM PART NO. QTY. QTY. DESCRIPTION
TWIN SINGLE
1 36635.0002 - 1 Base, Standard Single
39615.0000 - 1 Base, Tall Single
37866.0001 1 - Base, Standard Twin (For use with 21.8˝ Hood)
39594.0000 1 - Base, Tall Twin (For use with 21.8˝ Hood)
37866.0002 1 - Base, Standard Twin (For use with 19.8˝ Hood)
39594.0002 1 - Base, Tall Twin (For use with 19.8˝ Hood)
2 25137.0001 6 4 Foot (Add 2 for Tall Single, Add 4 for Tall Twin)
3 37274.0001 2 1 Server Stop
02308.0000 4 2 Screw, Pan Head #8-32 x .38"
01503.0000 4 2 Washer
4 36361.0000 2 1 Trim, Base Cover
01308.0002 4 2 Screw, Truss Head, Locking #6-32 x .25"
02332.0005 4 2 Screw, Hex #6 x .38"
5 37926.0000* 1 - Spacer
* Indicates the part number listed is for reference only.
9
39830 061407
Loading...