To ensure you have the latest revision of the Operating Manual, or to view the Illustrated Parts
Catalog, Programming Manual, or Service Manual, please visit the Bunn-O-Matic website, at
www.bunn.com. This is absolutely FREE, and the quickest way to obtain the latest catalog and
manual updates. For Technical Service, contact Bunn-O-Matic Corporation at 1-800-263-2256.
Bunn-O-Matic Corporation of Canada (“Bunn”) warrants equipment manufactured by it as follows:
1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers
thermal servers and Thermofresh servers (mechanical and digital) - 1 year parts and 1 year labour.
2) All other equipment - 2 years parts and 1 year labour plus added warranties as specified below:
a) Electronic circuit and/or control boards - parts and labour for 3 years.
b) Compressors on refrigeration equipment - 5 years parts and 1 year labour.
c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve
analysis - parts and labour for 4 years or 40,000 pounds of coffee, whichever comes first.
These warranty periods run from the date of installation. Bunn warrants that the equipment manufactured
by it will be commercially free of defects in material and workmanship existing at the time of manufacture and
appearing within the applicable warranty period. This warranty does not apply to any equipment, component
or part that was not manufactured by Bunn or that, in Bunn’s judgement, has been affected by misuse, neglect,
alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling,
equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to
replacement of items subject to normal use including but not limited to user replaceable parts such as seals and
gaskets. This warranty is conditioned on the Buyer 1) giving Bunn prompt notice of any claim to be made under
this warranty by telephone at (905) 841-2866 or by writing to 280 Industrial Parkway South, Aurora, Ontario, L4G
3T9. 2) if requested by Bunn, shipping the defective equipment prepaid to an authorized Bunn service location;
and 3) receiving prior authorization from Bunn that the defective equipment is under warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, CONDITION,
WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF EITHER MERCHANTABILITY, MERCHANTABLE QUALITY OR FITNESS FOR A PARTICULAR PURPOSE.The
agents, dealers or employees of Bunn are not authorized to make modifications to this warranty or to make
additional warranties that are binding on Bunn. Accordingly, statements by such individuals, whether oral or
written, do not constitute warranties and should not be relied upon.
If Bunn determines in its sole discretion that the defective equipment is covered by warranty, Bunn, at its
exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts
and/or labour (during the applicable parts and labour warranty periods specified above) to repair the defective
components, provided that this repair is done by a Bunn Authorized Service Representative; or 2) shall replace
the equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE
SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT
BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall Bunn be liable for any other damage or loss, including, but not limited to, lost profits, lost
sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute
equipment, facilities or services, or any other special, incidental, consequential or punitive damages.
RETURN POLICY
CONTACT PLANT FOR RETURN MATERIAL AUTHORIZATION. ALL RETURNS MUST
BE AUTHORIZED BY BUNN-O-MATIC AND ARE SUBJECT TO A RETURN CHARGE.
392, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN
Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic,
Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design,
Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with
the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel,
Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh,
Titan, trifecta, Velocity Brew, A Partner You Can Count On, Air Brew, Air Infusion, Beverage Bar Creator, Beverage Profit
Calculator, Brew better, not bitter., BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer
Control, Nothing Brews Like a BUNN, Pouring Profits, Signature Series, Tea At Its Best, The Horizontal Red Line, Ultra are
either trademarks or registered trademarks of Bunn-O-Matic Corporation.
2
8/12
USER NOTICES
WARMERS AND
SURFACES ARE HOT
LES RÉCHAUDS ET LES
SURFACES SONT CHAUDES
CAUTION
ATTENTION
! AVERTISSEMENT
! WARNING
• FILL WATER TANK BEFORE PLUGGING IN UNIT OR
ENERGIZING THE THERMOSTAT.
• REMPLIR LE RÉSERVOIR D'EAU AVANT DE BRANCHER
L'APPAREIL OU DE METTRE LE THERMOSTAT SOUS TENSION.
• NE PAS SURCHARGER LE CIRCUIT.
• TOUJOURS METTRE LE BOITIER À LA MASSE.
• NE PAS DÉFORMER LA FICHE OU LE CORDON.
• SE CONFORMER AUX CODES NATIONAL OU LOCAL
D'ÉLECTRICITÉ.
• GARDER LES PRODUITS COMBUSTIBLES À DISTANCE.
TOUT MANQUEMENT À SE CONFORMER À CES DIRECTIVES PEUT
ENTRAINER DES DOMMAGES À L'ÉQUIPMENT OU PRODUIRE DES
DANGERS D'INCENDIE OU D'ÉLECTROCUTION.
VEUILLEZ LIRE LE MANUEL DE FONCTIONEMENT
EN ENTIER, Y COMPRIS LES LIMITES DE GARANTIES ET
RESPONSABILITÉS,AVANT D’ACHETER
OU D'UTILISER LE PRÉSENT PRODUIT.
L' ÉQUIPEMENT EST TOUJOURS SOUS TENSION
LORSQU'IL N'EST PAS DÉBRANCHÉ.
Carefully read and follow all notices in this manual and on the equipment. All labels on the equipment should
be kept in good condition. Replace any unreadable or damaged labels.
#00831.0002
#37881.7000
#00658.7000
#03408.7002
#03409.7002
#12364.7000
Page 3
10053.1 101508
ELECTRICAL REQUIREMENTS
CAUTION - The brewer must be disconnected from the power source until specified in Initial Set-Up.
The brewer has an attached cordset and requires 2-wire grounded service rated 120 volts ac, 15 amp, single
phase, 60 Hz.
INITIAL SET-UP
CAUTION - The brewer must be disconnected from the power source throughout the initial set-up, except
when specified in the instructions.
1. Insert an empty funnel into the funnel rails.
2. Place an empty dispenser under the funnel.
3. Open the flip lid on top of the brewer and pour in three pitchers of tap water. Allow approximately two
minutes between pitchers for water to flow into the tank. While the third pitcher of water is entering the
tank, the tank will fill to capacity and the excess will flow from the sprayhead, out of the funnel, and into the
dispenser. FIG. 1
4. When the flow of water from the funnel stops, connect the brewer to the power source and wait approximately twenty minutes for the water in the tank to heat to the proper temperature. Some water will drip
from the funnel during this time; this is due to expansion and should not occur thereafter.
5. Empty the dispenser and replace it under the funnel.
6. Open the flip lid on top of the brewer and pour in one pitcher of tap water.
7. When water has stopped flowing from the funnel let the water in the tank reheat to the proper temperature.
8. Empty the dispenser. The brewer is now ready for use in accordance with the coffee brewing instructions
below.
NOTE:
The control thermostat will need to be adjusted downward to compensate for high altitudes. Refer to
Service Manual for instructions.
FIG. 1 POUR IN WATER ONLY
P4038.50
COFFEE BREWING
1. Insert a BUNN® filter into the funnel.
2. Pour the fresh coffee into the filter and level the
bed of grounds by gently shaking.
3. Slide the funnel into the funnel rails.
4. Place an empty dispenser beneath the funnel.
Models with warmers - Turn on lower warmer
switch.
5. Open the flip lid on top of the brewer and pour in
one pitcher of tap water. FIG. 1
6. When brewing is completed, simply discard the
grounds and filter.
Page 4
10053.1 101508
CLEANING
1. The use of a damp cloth rinsed in any mild, non-abrasive, liquid detergent is recommended for cleaning all
surfaces on Bunn-O-Matic equipment.
2. Check and clean the sprayhead. The sprayhead holes must always remain open.
3. With the sprayhead removed, insert the deliming spring (provided) all the way into the sprayhead tube.
When inserted properly, no more than two inches of spring should be visible. Saw back and forth five or
six times.
NOTE – In hard water areas, this may need to be done daily. It will help prevent liming problems in the brewer
and takes less than a minute.
FIG. 2 SPRAYHEAD
FIG. 3 DELIMING SPRING
Page 5
10053.1 101508
10053.1 101508
Page 5
FIG. 3 RESSORT DÉCHAULEUR
FIG. 2 LA BUSE
minute et prévient les problèmes liés au calcaire dans l’infuseur.
NOTE – En présence d’eau dure, cette procédure pourra être effectuée tous les jours. Cela prend moins d’une
va-et-vient, environ cinq à six fois.
inséré correctement, on ne devrait pas voir plus de deux pouces du ressort. Agiter dans un mouvement de
3. Après avoir retiré la buse, insérer le ressort déchauleur (fourni) entièrement dans le tube de la buse. S’il est
2. Vérifier et nettoyer la buse. Les orifices de la buse ne doivent jamais être obstrués.
nettoyage des surfaces de l’équipement Bunn-O-Matic.
1. L’utilisation d’un linge humide rincé dans un détergent liquide doux non abrasif est recommandée pour le
NETTOYAGE
10053.1 101508
Page 4
FIG. 1 VERSER DE L'EAU SEULEMENT
P4038.50
de café et le filtre.
6. Une fois que l’infusion est terminée, jeter le marc
lagée sur le dessus de l’infuseur.
5. Verser un pichet d’eau potable dans la partie gril-
4. Placer un distributeur vide sous l’entonnoir.
3. Glisser l’entonnoir sur ses rails.
la mouture en agitant légèrement.
2. Verser du café frais dans le filtre et niveler
dans l’entonnoir.
®
1. Insérer un filtre Bunn
INFUSION DU CAFÉ
RÉGLAGE INITIAL
ALIMENTATION ÉLECTRIQUE
ment et production excessive de vapeur autour de l’entonnoir à la page 5 pour les instructions.
NOTE: NOTE : Le thermostat devrait être ajusté à la baisse en hautes altitudes. Consulter la rubrique crachote-
ci-dessous.
7. Vider le distributeur. L’infuseur est maintenant prêt à être utilisé conformément aux instructions d’infusion
ture désirée.
6. Une fois que l’eau a cessé de s’écouler par l’entonnoir, laisser l’eau du réservoir se réchauffer à la tempéra-
5. Verser un pichet d’eau potable dans la partie grillagée sur le dessus de l’infuseur
suite.
peu d’eau s’écoulera de l’entonnoir en raison de l’expansion. Cela ne devrait pas se reproduire par la
environ vingt minutes jusqu’à ce que l’eau du réservoir atteigne la température désirée. Pendant ce temps,un
4. Lorsque l’eau cesse de s’écouler par l’entonnoir, brancher l’infuseur dans une prise de courant et attendre
s’écoule dans le réservoir, celui-ci se remplira
minutes pour que le contenu de chaque pichet s’écoule dans le réservoir. Pendant que le troisième pichet
3. Verser trois pichets d’eau potable dans la partie grillagée sur le dessus de l’infuseur. Allouer environ deux
2. Placer un distributeur vide sous l’entonnoir.
1. Insérer un entonnoir vide dans les rails de l’entonnoir.
initial, sauf lors d’un avis contraire dans les instructions.
ATTENTION :L’infuseur doit être débranché de la prise de courant pendant toute la procédure de réglage
reliée à la terre de 120 volts c.a., 15 ampères, monophasé, 60 Hz.
L’infuseur est doté d’un cordon d’alimentation qui se branche dans une prise de courant à deux fils
la section Réglage initial.ATTENTION - L' infuseur doit être débranché de la prise de courant jusqu'à la lecture d' un avis contraire dans
L'APPAREIL OU DE METTRE LE THERMOSTAT SOUS TENSION.
• NE PAS SURCHARGER LE CIRCUIT.
• TOUJOURS METTRE LE BOITIER À LA MASSE.
• NE PAS DÉFORMER LA FICHE OU LE CORDON.
• SE CONFORMER AUX CODES NATIONAL OU LOCAL
D'ÉLECTRICITÉ.
• GARDER LES PRODUITS COMBUSTIBLES À DISTANCE.
TOUT MANQUEMENT À SE CONFORMER À CES DIRECTIVES PEUT
ENTRAINER DES DOMMAGES À L'ÉQUIPMENT OU PRODUIRE DES
DANGERS D'INCENDIE OU D'ÉLECTROCUTION.
VEUILLEZ LIRE LE MANUEL DE FONCTIONEMENT
EN ENTIER, Y COMPRIS LES LIMITES DE GARANTIES ET
RESPONSABILITÉS,AVANT D’ACHETER
OU D'UTILISER LE PRÉSENT PRODUIT.
L' ÉQUIPEMENT EST TOUJOURS SOUS TENSION
LORSQU'IL N'EST PAS DÉBRANCHÉ.
10053.1 101508
Page 3
#12364.7000
#03409.7002
#03408.7002
#00658.7000
#37881.7000
#00831.0002
manie endommagée ou illisible.
décalcomanies sur l'équipement devraient être maintenues en bon état. Veuillez remplacer toute décalcoPrenez soin de lire et de suivre toutes les consignes dans ce manuel et sur l’équipement. Toutes les
AVIS À L’UTILISATEUR
8/12
2
Horizontal Red Line, Ultra sont des marques de commerce déposées de Bunn-O-Matic Corporation.
Heating System, Daypart, Digital Brewer Control, Nothing Brews Like a BUNN, Pouring Profits, Signature Series, Tea At Its Best, The
Brew, Air Infusion, Beverage Bar Creator, Beverage Profit Calculator, Brew better, not bitter., BUNNSource, Coffee At Its Best, Cyclonic
The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, Velocity Brew, A Partner You Can Count On, Air
Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard,
PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design,
Clear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew,
BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyGourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic,
392, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family
DOIVENT-ÊTRE PRÉCÉDEMMENT AUTORISÉS PAR BUNN-O-MATIC ET SONT SUJETS À DES FRAIS DE RETOUR.
COMMUNIQUER AVEC BUNN-O-MATIC POUR UNE AUTORISATION DE RETOUR. TOUS LES RETOURS
POLITIQUE DE RETOUR
touts autres dommages-intérêts spéciaux, accessoires, indirects ou punitifs.
des temps d’arrêt, le coût d’appareils de remplacement, de services de remplacement, ou des installations de remplacement, et
profits, les ventes perdues, la perte d’utilisation de l’appareil, les réclamations des clients de l’acheteur, le coût du capital, le coût
En aucun cas Bunn ne sera tenu responsable d’autres dommages ou pertes, y compris, mais sans y être limité à, la perte de
DISCRÉTION DE BUNN.
À LA RÉPARATION, AU REMPLACEMENT, OU AU REMBOURSEMENT DU PRIX D’ACHAT DE L’APPAREIL, À L’ENTIÈRE
VENTE DE CET APPAREIL, QU’IL RELÈVE OU NON DE GARANTIE, SERA LIMITÉ, TEL QUE PRÉCISÉ DANS LA PRÉSENTE,
LE RECOURS DE L’ACHETEUR CONTRE BUNN POUR LA VIOLATION DE TOUTE OBLIGATION DÉCOULANT DE LA
ou rembourser le prix d’achat de l’équipement.
condition que la réparation soit effectuée par un représentant de service autorisé par Bunn; soit 2) remplacer l’équipement
main-d’œuvre (pendant le délai applicable de garantie tel qu’indiqué ci-dessus) pour réparer les composants défectueux, à
exclusive, pendant que l’appareil est sous garantie, devra soit 1) fournir gratuitement des pièces de rechange et / ou de la
Si Bunn détermine à son entière discrétion que l’appareil défectueux est couvert par la garantie, Bunn, à sa discrétion
la responsibilité de Bunn.
Bunn. Ainsi, les déclarations de ces individus, orales comme écrites, ne constituent pas de garanties et n’engagent pas
ne sont pas autorisés à modifier cette garantie ou à apporter des garanties supplémentaires qui engageront ou affecteront
Les agents, concessionnaires ou employés de Bunn
MARCHANDE, OU DE CONFORMITÉ À UN USAGE PARTICULIER.
EXPRESSE OU IMPLICITE, Y COMPRIS MAIS NON LIMITÉE À TOUTE GARANTIE IMPLICITE DE QUALITÉ, DE QUALITÉ
LA GARANTIE CI-DESSUS EST EXCLUSIVE ET REMPLACE TOUTE AUTRE GARANTIE, CONDITION, ÉCRITE OU ORALE,
est sous garantie.
payé, à un centre de service autorisé par Bunn; et 3) reçoive une autorisation préalable de la part de Bunn que l’appareil défectueux
écrit au 280 Industrial Parkway South, Aurora, Ontario L4G 3T9; 2) fasse livrer, à la demande de Bunn, l’appareil défectueux, port
l’acheteur 1) avise Bunn ponctuellement de toute réclamation en vertu de cette garantie par téléphone au (905) 841-2866 ou par
n’est pas limité à des pièces remplaçables par l’utilisateur tels des joints d’étanchéité. Cette garantie est conditionnelle à ce que
remplacement des composantes des appareils devant être remplacées dans le cour normal de leur utilisation; cela comprend mais
d’équipement liées à une eau de mauvaise qualité, à des dommages ou à un accident. En outre, cette garantie ne s’applique pas au
ou un usage impropre, un entretien impropre ou une réparation impropre, un manque de nettoyage et détartrage, des défaillances
été fabriqués par Bunn ou qui, selon Bunn, auraient subi un usage abusif, une négligence, une altération, une installation impropre,
pendant la période couverte par la garantie. Cette garantie ne s’applique pas aux appareils, composants ou pièces qui n’ont pas
affectés d’aucun défaut commercial quant à leur matériel ou leur fabrication, existant au moment de fabrication, et se manifestant
Ces délais de garantie commencent à courir à partir de la date d’installation. Bunn garantit que les appareils fabriqués par elle ne sont
original de l’usine - 4 ans pièces et main-d’œuvre ou 40 000 livres de café, selon la première éventualité.
c) Bavures de mouture sur équipement de moulure de café pour mourde le café afin de répondre à l’analyse de passage au crible
b) Compresseurs inclus dans l’équipement de réfrigération - 5 ans pièces et 1 an main-d’œuvre.
a) Cartes de circuits électroniques et / ou de contrôle - 3 ans pièces et main-d’œuvre.
2) Tout autre appareil - 2 ans pièces et 1 an main-d’œuvre ainsi que les garanties additionnelles indiquées ci-dessous :
et 1 an main-d’œuvre.
nacelle de type MCP/MCA, serveurs thermiques et serveurs de type Thermofresh (mécanique et numérique) - 1 an pièces
1) Cafetières, carafes thermiques, carafes à décanter, serveurs GPR, distributrices de thé glacé / de café glacé, infuseursBunn-O-Matic Corporation of Canada (« Bunn ») garantit les appareils qu’elle fabrique ainsi :
au numéro 1 800-263-2256.
des mises à jour est rapide. Pour le service technique, contactez la Bunn-O-Matic Corporation,
Bunn-O-Matic, à l’adresse www.bunn.com. Ces manuels sont GRATUITS et le téléchargement
lustré de pièces, le manuel de programmation ou le manuel d’entretien, visitez le site Internet de
Pour obtenir la plus récente version du manuel d’utilisation ou pour visualiser le catalogue il-