Bunn RWS1B, RWS1A, RWS1 User Manual

RWS1, RWS1A, & RWS1B

WARMERS

BUNN

(s⁄n RW10002448 and up)

INTRODUCTION

This portable warmer keeps one BUNN® Safety-Fresh® server of coffee at the perfect temperature.

ELECTRICAL REQUIREMENTS

Model RWS1 has attached cordset and requires 2-wire grounded service rated 120 volts ac, single phase.

Model RWS1 has 100 watts total, plus 200W maximum auxiliary receptacle.

Model RWS1B has attached cordset and requires 2-Wire grounded service rated 100 volts ac, single phase.

Model RWS1B has 90 watts total, plus 200W maximum auxiliary receptacle.

Models RWS1A requires 2-wire grounded service rated 220-240 volts ac, single phase. Model RWS1A has

100 watts total. It is equipped with an I.E.C. 320 connector for attachment of a customer-supplied cordset.

WARRANTY

Bunn-O-Matic Corp. (“Bunn”) warrants the equipment manufactured by it to be commercially free from defects in material and workmanship existing at the time of manufacture and appearing within one year from the date of installation. In addition:

1.) Bunn warrants electronic circuit and/or control boards to be commercially free from defects in material and

workmanship for two years from the date of installation.

2.) Bunn warrants the compressor on refrigeration equipment to be commercially free from defects in material

and workmanship for two years from the date of installation.

3.) Bunn warrants that the grinding burrs on coffee grinding equipment will grind coffee to meet original factory

screen sieve analysis for three years from date of installation or for 30,000 pounds of coffee, whichever comes first.

This warranty does not apply to any equipment, component or part that was not manufactured by Bunn or that, in Bunn’s judgement, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of Bunn are

not authorized to make modifications to this warranty or to make additional warranties that are binding on Bunn. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

The Buyer shall give Bunn prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois, 62708-3227. If requested by Bunn, the Buyer shall ship the defective equipment prepaid to an authorized Bunn service location. If Bunn determines, in its sole discretion, that the equipment does not conform to the warranty, Bunn shall repair the equipment with no charge for parts during the warranty period and no charge for labor by a Bunn Authorized Service Representative during the warranty period. If Bunn determines that repair is not feasible, Bunn shall, at its sole option, replace the equipment or refund the purchase price for the equipment.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

TELEPHONE: (217) 529-6601 FAX: (217) 529-6644

WARRANTY, CONT.

THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AS

SPECIFIED HEREIN, TO REPAIR OR, AT BUNN’S SOLE OPTION, REPLACEMENT OR REFUND.

In no event shall Bunn be liable for any other damage or loss, including, but not limited to, lost profits, lost sales,

loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

CLEANING

The use of a damp cloth rinsed in any mild, nonabrasive, liquid detergent is recommended for cleaning all

surfaces on Bunn-O-Matic equipment.

REPLACEMENT PARTS

01908.0000 ........ IEC Power Connector (RWS1A)

20630.0002 ........ Cordset Assy

00986.0002 ........ Decal, Electrical Warning

24708.0000 ........ Decal, Front-Black Decor

24708.0001 ........ Decal, Front-Black Decor (RWS1A) After

S/N RW10024943

02822.0000 ........ Decal, 200 Watt Maximum

12364.0000 ........ Decal, Warmer & Surfaces are Hot

12249.0006 ........ Guide Rail (Brass)

12249.0002 ........ Guide Rail (Stainless Steel)

03359.0001 ........ Leg, 4.0” Adjustable Black

00511.0000 ........ Leg, 4.0” Adj. Satin Nickel

03993.0000 ........ Pad,Anti Skid (Legs)(For 03359.0001)

03996.0000 ........ Pad, Anti-Skid (Legs) (For 00511.0000)

03628.0000 ........ Rear Receptacle (RWS1, RWS1B)

24738.0000 ........ Shield, Heat Deflector

02753.0000 ........ Switch, On/Off Lighted (RWS1, RWS1B)

02754.0000 ........ Switch, On/Off Lighted (RWS1A) Prior to

S/N RW10024943

27727.0000 ........ Switch, On/Off Lighted (RWS1A) After

S/N RW10024943

03656.0000 ........ Warmer Dish

03652.0000 ........ Warmer Dish Assembly (RWS1)

02817.0000 ........ Warmer Dish Assembly (RWS1A)

03668.0000 ........ Warmer Dish Assembly (RWS1B)

01227.0000 ........ Warmer Element ,100W @ 120V (RWS1)

01225.0000 ........ Warmer Element, 90W @ 100V (RWS1B)

01951.0000 ........ Warmer Element, 100W @ 220V (RWS1A)

05212.0000 ........ Warmer Retainer Plate

24436.0000 ........ Wiring Harness, 100V/120V (RWS1, RWS1B)

24437.0000 ........ Wiring Harness, (240V) (RWS1A)

SCHEMATIC WIRING DIAGRAM RWS1 & RWS1B

100 or 120 VOLTS A C

2 WIRE

BLU

AUXILIARY OUTLET

GREEN

200 WATT MAXIMUM

GREEN

WARMER

SCHEMATIC WIRING DIAGRAM RWS1A

BLK

BLU

GRN/YEL

WARMER

WHI

WHIBLK

RED

230 VOLTS A C

2 WIRE