Bunn OHW User Manual
ITE M#
PROJECT
Pourover Hot Water Machine
Features
Pourover Hot Water Machine
• Plugs into any 120 volt outlet, no plumbing needed.
• Steaming hot water constantly available for fast, hot refreshment preparation–
a quick cup at a time.
• No waiting. Draw hot water anytime–even immediately after refilling.
• Space-saving size to fit anywhere. Just 6.6” (16.8 cm) wide and 16.9”
(42.9 cm) high.
• High quality, easy-to-clean stainless steel exterior and tank for a long,
dependable life.
• Tank size: 80 oz. (2.37 litres)
DATE
Dimensions: 16.9”H x 6.5”W x 10.8”D
(42.9cm H x 16.8cm W x 27.4cm D)
For current specification sheets and other information, go to www.bunn.com.
Model OHW
Related Products
Model Agency Listing
OHW
E9006.0003B
Patents Apply
3/06
E4
Dimensions & Specifications
3.58
2.26
8.54
7.08
1.00
5.06
5.71
6.57
16.66
3.92
.4
2
10.8
Model Product # Volts Amps Tank Heater Total ˚F Capacity Cu. Shipping Cord
Watts Watts Settings Ft. Weight Attached
OHW 02550.0003 120 8.6 1000 1040 200 Pourover 1.9
*Power cord (NEMA 5-15P) 15 Amp-120V machine only.
Electrical: Model requires 2-wires plus ground service rated 120V, single phase, 60Hz.
3
ft
13 lbs. Yes*
BUNN Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches. Bunn Corporation owns all copyrights relating to materials in this publication. Please contact Bunn Corporation to request permission to reproduce any portion of this publication.
Loading...