Bunn IMIX-3 Parts List

RELEASED FOR PRODUCTION

IMIX

®

-3

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, specifications, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: [phone] FAX: [phone]

37509.0001E 11/14 ©2012 Bunn-O-Matic Corporation

DIR Num: 37509.0001 06, March 2015

RELEASED FOR PRODUCTION

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, ther­mal servers and ThermoFresh® servers (mechanical and digital) 1 year parts and 1 year labor.

2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below:
a) Electronic circuit and/or control boards - parts and labor for 3 years.
b) Compressors on refrigeration equipment - 5 years parts and 1 year labor.
c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and
labor for 4 years or 40,000 pounds of coffee, whichever comes first.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be
commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the
applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured
by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation,
improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality,
damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but
not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN
prompt notice of any claim to be made under this warranty by telephone at [phone] or by writing to Post Office Box
3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized
BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX­PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make

modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such
individuals, whether oral or written, do not constitute warranties and should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive op­tion while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the
applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair
is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for
the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS
EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION
AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of
use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities
or services, or any other special, incidental or consequential damages.

392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, Brew­WISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with
the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design,
Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet
Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment
Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com,
Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in
Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage
Bar Creator, Beverage Profit Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic
Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture
Prompted Cleaning, Pouring Profits, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either
trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta® brewer housing configura­tion is a trademark of Bunn-O-Matic Corporation.

2

37509.1 031314

DIR Num: 37509.0001 06, March 2015

RELEASED FOR PRODUCTION

TABLE OF CONTENTS

TITLE PAGE NO.

Auger Drive and Hopper Assembly ...............................................................................................................................................12

Covers, Panels and Drip Tray ..........................................................................................................................................................4

Dispense Valves and Lines ............................................................................................................................................................20

Door, Lamp, Dispense Switches and Panels ...................................................................................................................................8

Electrical Controls .........................................................................................................................................................................22

Mixing/Whipper Chambers and Drive Motor .................................................................................................................................14

Numerical Index ............................................................................................................................................................................24

Tank, Heater and Overflow Protection ...........................................................................................................................................16

3

DIR Num: 37509.0001 06, March 2015

37509.1 071612

RELEASED FOR PRODUCTION

COVERS, PANELS AND DRIP TRAY

36 1 2

3 4 5 6 7

IMIX®-3

8

9

36

35

34

33

39

8

36

37

10

38

11

12

13

36

14

15

16

17

18

19

20

21

32 31 30 29 28 26 27 25 23 24 22

4

DIR Num: 37509.0001 06, March 2015

P3244.25

37509.1 071613

RELEASED FOR PRODUCTION

COVERS, PANELS AND DRIP TRAY

ITEM PART NO. QTY. DESCRIPTION

1 36958.0001 1 Cover, Top Rear - BLK

36958.0002 1 Cover, Top Rear - SST

01311.0003 2 Screw, Truss Head BLK #8-32 x .25"

01311.0000 2 Screw, Truss Head SST #8-32 x .25"

2 36959.0001 1 Cover, Top Front - BLK

36959.0002 1 Cover, Top Front - SST

01311.0003 2 Screw, Truss Head BLK #8-32 x .25"

01311.0000 2 Screw, Truss Head SST #8-32 x .25"

01382.0002 2 Screw, Truss Head BLK #6-32 x .375"

01308.0000 2 Screw, Truss Head SST #6-32 x .375"

3 35926.0000 4 Bracket, Side Support

01311.0001 8 Screw, Truss Head - Locking #8-32 x .25"

4 36967.0002 1 Panel, Inner Rear

01311.0001 6 Screw, Truss Head - Locking #8-32 x .25"

5 36968.0001 1 Panel, Inner Access

01311.0000 2 Screw, Truss Head #8-32 x .25"

6 36986.0000 1 Strap, Top Support

01311.0001 4 Screw, Truss Head - Locking #8-32 x .25"

7 36230.0001 1 Panel, Inner Right (Right Hinged Door)

36230.0002 1 Panel, Inner Right (Left Hinged Door)

01311.0001 2 Screw, Truss Head - Locking #8-32 x .25"

8 35912.0001 2 Panel, Side - BLK

35912.0002 2 Panel, Side - SST

01311.0003 6 Screw, Truss Head BLK #8-32 x .25"

01311.0000 6 Screw, Truss Head SST #8-32 x .25"

9 34666.0000 1 Catch, Door Latch

02336.0000 2 Screw, Truss Head #4-40 x .375"

01509.0001 2 Lockwasher, Int.-tooth #4

10 36965.0000 1 Panel, Whipper Motor (Early Models)

36965.0003 1 Panel, Whipper Motor (Late Models)

01311.0001 6 Screw, Truss Head - Locking #8-32 x .25"

11 36978.0000 1 Tray, Powder Box (Early Models)

36978.0001 1 Tray, Powder Box (Late Models)

12 37988.0000 2 Screw, Captive #10-32 x .50" (Early Models)

34998.0000 2 E-Ring, Retaining .127" OD

13 36644.0000 1 Bracket, Door Locking

01311.0001 2 Screw, Truss Head - Locking #8-32 x .25"

14 36743.0001 1 Cap, Splash Panel Right

44224.0000 2 Screw, Pan Head Plastite #6 x .375"

15 37498.1000 1 Panel W/Decal, Splash (Includes items 14, 16, 17, 18, & 24)(Self Serve Models)

37498.1001 1 Panel W/Decal, Splash (Includes items 14, 16, 17, 18, & 24)(Portion Control)

16 28328.0011 1 Decal, Caution-Hot Liquid & Cup (Self Serve Models)

28328.0013 1 Decal, Caution-Hot Liquid & Cup (Portion Control)

(Continued)

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

5

37509.1 010713

DIR Num: 37509.0001 06, March 2015

RELEASED FOR PRODUCTION

COVERS, PANELS AND DRIP TRAY

36 1 2

3 4 5 6 7

IMIX®-3

(Continued)

8

9

36

35

34

33

39

8

36

37

10

38

11

12

13

36

14

15

16

17

18

19

20

21

32 31 30 29 28 26 27 25 23 24 22

6

DIR Num: 37509.0001 06, March 2015

P3244.25

37509.1 071613

RELEASED FOR PRODUCTION

COVERS, PANELS AND DRIP TRAY

ITEM PART NO. QTY. DESCRIPTION

17 02536.0000 2 Grommet, Silicone .375" ID

18 36983.0000 1 Guide, Cup

19 37462.0000 1 Bracket, Drip Tray

01311.0001 2 Screw, Truss Head - Locking #8-32 x .25"

20 36985.0000 1 Cover, Drip Tray

21 36984.0000 1 Drip Tray

22 36972.1000 1 Panel, Lower Access (Includes item 23)

01311.0000 3 Screw, Truss Head #8-32 x .25"

23 37478.0000 1 Schematic 120V (Doors with Flourescent Lighting)

37478.0010 1 Schematic 120V (Doors with LED Lighting)

37478.0001 1 Schematic 230V (Doors with Flourescent Lighting)

37478.0011 1 Schematic 230V (Doors with LED Lighting)

24 36743.0000 1 Cap, Splash Panel Left

44224.0000 2 Screw, Pan Head Plastite #6 x .375"

25 36974.0001 1 Shelf, Powder Box

01311.0001 2 Screw, Truss Head - Locking #8-32 x .25"

02336.0000 2 Screw, Truss Head #4-40 x .375"

26 36398.0000 1 Plug, Hole DB-9 (Early Models)

27 02434.0008* 4 Gasket, U-Channel 4.60" (Order item 41)

28 01526.0001 4 Washer, Flat .438" ID x 1.88" OD

29 03996.0000 4 Pad, Rubber 1.25" Dia. (Also see item 40)

30 26528.0000 4 Leg, 4.0" Adjustable (Also see item 40)

31 36963.0000 1 Panel, Bottom

32 36229.0001 1 Panel, Inner Left (Right Hinged Door)

36229.0002 1 Panel, Inner Left (Left Hinged Door)

01311.0001 2 Screw, Truss Head - Locking #8-32 x .25"

33 36961.1001 1 Panel Assembly, Rear - BLK (Includes items 34 and 35)

36961.0002 1 Panel Assembly, Rear - SST

01311.0003 11 Screw, Truss Head BLK #8-32 x .25"

01311.0000 11 Screw, Truss Head SST #8-32 x .25"

34 00986.0000 1 Decal, Warning-Electrical

35 00656.0001 1 Decal, Comply to Plumbing Code

36 37881.0000 4 Decal, No Serviceable Parts

37 00824.0002 1 Decal, Grounding

38 21436.0000 2 Catch, Magnetic Snap-in (Late Models)

39 36896.0000 4 Pad, Styro 1.0" x 2.0" x 0.5"

40 13255.0003 - Kit, Leg 4.0" Adjustable (Includes 4 each of items 29 & 30)

41 02434.1000 - Gasket, U-Channel - 18" LG

02434.1001 - Gasket, U-Channel - 36" LG

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

7

DIR Num: 37509.0001 06, March 2015

37509.1 071613

RELEASED FOR PRODUCTION

31

32

30

27

26

DOOR, LAMP, DISPENSE SWITCHES AND PANELS

1 2 3 4 5 6

44
43

Models w/Flourescent Lighting

7 8 9

10

11

IMIX®-3

32 35 33 36 34 5 6

12

13

29

28

27

26

25

42

24

33

34

35

38

37

40

Portion Controls

23

36

22

39

41

14

15

21

20

19

18

16

17

P3245.45

8

DIR Num: 37509.0001 06, March 2015

37509.1 120613

RELEASED FOR PRODUCTION

DOOR, LAMP, DISPENSE SWITCHES AND PANELS

ITEM PART NO. QTY. DESCRIPTION

1 37466.0003 1 Panel, Lamp (Doors with Flourescent Lights)

44224.0000 4 Screw, Pan Head Plastite #6 x .375"

2 32806.0000 2 Lamp, Fluorescent - 7 Watts (Doors with Flourescent Lights)

3 32807.0001 2 Lamp Holder, Fluorescent (Doors with Flourescent Lights)

4 37456.0000 1 Lens, Fixed

02336.0000 2 Screw, Truss Head #4-40 x .375"

5 37457.0000 1 Display, Graphics

37457.0006 1 Display, Graphics Iced Coffee

6 37456.0001 1 Lens, Removable

7 37254.0003 1 Decal, Cleaning

8 36149.0000 8 Fastener, Snap-in .197" Hole

9 36667.1001 1 Panel, Door - Upper (Includes item 7)(Right Hinged Door)

36667.1003 1 Panel, Door - Upper (Includes item 7)(Left Hinged Door)

44224.0000 8 Screw, Pan Head Plastite #6 x .375"

01311.0001 19 Screw, Truss Head Locking #8-32 x .25"

10 36658.0000 1 Flange, Door

11 36734.0001 1 Bracket, Inner Panel

44224.0000 2 Screw, Pan Head Plastite #6 x .375"

12 36244.0000 1 Plug, Door Hinge

44224.0000 1 Screw, Pan Head Plastite #6 x .375"

13 37096.0001 1 Door (Doors with Flourescent Lights)

37096.0011 1 Door (Doors with LED Lights)

14 32863.1000 1 Keylock W/Keys, Door

28095.0000 1 Key Set

15 36231.0000 1 Switch, Membrane Program (Self Serve Models)

36231.0001 1 Switch, Membrane Program (Portion Control Models)

16 36795.0000 3 Strip, Flavor Adhesive

17 36796.0001 3 Strip, Flavor Door

18 00669.0004 1 Plug, .75" x .625" hole

19 36762.0000 3 Switch Housing, Single Button (Self Serve Models)

20 36761.0000 3 Cover, Switch (Self Serve Models)

21 36763.0000 3 Switch Pad, Single Button (Self Serve Models)

22 37672.1000 3 Circuit Board Assy, Dispense Button (Self Serve Models)

44224.0000 12 Screw, Pan Head Plastite #6 x .375"

23 37013.0000 1 Cover, LCD Door Lens

24 36147.1001 1 Circuit Board Assy, Display

44224.0000 4 Screw, Pan Head Plastite #6 x .375"

25 24457.0002 1 Screw, .25" Shoulder #8-32

26 36647.0000 2 Bracket, Hinge (Left Side Hinge)

36647.0001 2 Bracket, Hinge (Right Side Hinge)

01311.0001 6 Screw, Truss Head #8-32 x .25" Locking

27 34362.0000 2 Bushing, Hinge

(Continued)

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

9

DIR Num: 37509.0001 06, March 2015

37509.1 120613