Bunn HC-1 Parts List

BUNN
DISCONTINUED VERSION
Parts listed in this catalog
®
HC-1
(prior to S/N HC00025000)
may no longer be available.
ILLUSTRATED PARTS CATALOG
Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
are subject to change without notice.
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
26531.0001 03/02 ©1995 Bunn-O-Matic Corporation
WARRANTY
Bunn-O-Matic Corp. (“Bunn”) warrants the equipment manufactured by it to be commercially free from defects in material and workmanship existing at the time of manufacture and appearing within one year from the date of installation. In addition:
1.) Bunn warrants electronic circuit and/or control boards to be commercially free from defects in material and
workmanship for three years from the date of installation.
2.) Bunn warrants the compressor on refrigeration equipment to be commercially free from defects in material
and workmanship for two years from the date of installation.
3.) Bunn warrants that the grinding burrs on coffee grinding equipment will grind coffee to meet original factory
screen sieve analysis for three years from date of installation or for 30,000 pounds of coffee, whichever comes first.
This warranty does not apply to any equipment, component or part that was not manufactured by Bunn or that, in Bunn’s judgement, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of Bunn are
not authorized to make modifications to this warranty or to make additional warranties that are binding on Bunn. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.
The Buyer shall give Bunn prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois, 62708-3227. If requested by Bunn, the Buyer shall ship the defective equipment prepaid to an authorized Bunn service location. If Bunn determines, in its sole discretion, that the equipment does not conform to the warranty, Bunn shall repair the equipment with no charge for parts during the warranty period and no charge for labor by a Bunn Authorized Service Representative during the warranty period. If Bunn determines that repair is not feasible, Bunn shall, at its sole option, replace the equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AS SPECIFIED HEREIN, TO REPAIR OR, AT BUNN’S SOLE OPTION, REPLACEMENT OR REFUND.
In no event shall Bunn be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.
2
26531.1 021502
TABLE OF CONTENTS
Auger Drive and Hopper Assembly ................................................................................................................................................8
Covers, Panels and Drip Tray ......................................................................................................................................................... 4
Dispense Valves and Lines .......................................................................................................................................................... 16
Door, Lamps and Panels ................................................................................................................................................................ 6
Electrical Controls........................................................................................................................................................................ 18
Mixing/Whipper Chambers and Drive Motor ............................................................................................................................... 10
Numerical Index .......................................................................................................................................................................... 20
Strainer, Solenoid, Fill Valve and Lines ........................................................................................................................................ 14
Tank, Heater and Overflow Protection .......................................................................................................................................... 12
3
26531.1 060500
BUNN
®
COVERS, PANELS AND DRIP TRAY
HC-1
1
2
3
23
4
5
22
9
8
16
17
18
01311.0000
7
6
N
O
I
T
U
A
C
!
ID
U
HOT
Q
I
L
10
11
21
12
13
14
15
21
19 20 21
P915
4
26531.1 060500
COVERS, PANELS AND DRIP TRAY
ITEM PART NO. QTY. DESCRIPTION
1 26504.0000 2 Hinge
02308.0000 8 Screw, Pan Head #8 - 32 x .375"
2 25796.0000 1 Cover, Top Rear (SST)
25796.0001 1 Cover, Top Rear (Black)
02331.0000 4 Screw, Truss Head #10 - 32 x .375" (SST)
02331.0001 4 Screw, Truss Head #10 - 32 x .375" (Black)
3 25901.0000 1 Cover, Top Front (SST)
25901.0001 1 Cover, Top Front (Black)
4- - - - - - - - 1 Panel W/Decals, Front (Not available)(Early Models without Hopper Delay)
- - - - - - - - 1 Panel W/Decals, Front (Not available)(Late Models with Hopper Delay)
02331.0000 2 Screw, Truss Head #10 - 32 x .375"
5 26532.0001 1 Schematic, 120 & 120/240V (Early Models without Hopper Delay)
26702.0001 1 Schematic, 120 & 120/240V (Late Models with Hopper Delay)
6 26524.0000 1 Decal, Tank Heater Switch
7 26523.0000 1 Decal, Rinse/Run Switch
8 26232.0000 1 Cover, Right Side (SST)
26232.0001 1 Cover, Right Side (Black)
01311.0000 6 Screw, Truss Head #8 - 32 x .25"
9 25414.0000 1 Cover, Access (SST)
25414.0001 1 Cover, Access (Black)
01311.0000 2 Screw, Truss Head #8 - 32 x .25" (SST)
01311.0003 2 Screw, Truss Head #8 - 32 x .25" (Black)
10 26233.0001 1 Panel, Splash
01311.0000 4 Screw, Truss Head #8 - 32 x .25"
11 26757.0000 1 Plate W/Decals, Cup Stop (Includes items 12, 13 & 2 of item 21)
01311.0001 2 Screw, Truss Head #8 - 32 x .25" Locking
Also order item 23
12 12368.0001 1 Decal, Caution-Hot Liquid
13 26576.0001 1 Decal, Cup Placement
14 26509.0000 1 Cover, Drip Tray
15 26886.1000 1 Drip Tray Assy (Includes 4 of item 21)
16 26751.0000 1 Cover W/Decals, Rear & Bottom (Includes items 17 & 18)
17 00831.0000 1 Decal, Warning-Electrical
18 00656.0000 1 Decal, Comply to Plumbing Code
19 25887.0000 1 Cover, Left Side (SST)
25887.0001 1 Cover, Left Side (Black)
01311.0000 6 Screw, Truss Head #8 - 32 x .25"
20 26528.0000 4 Leg, 4.0” Adjustable (Also see item 24)
21 03996.0000 10 Pad, Rubber 1.25" Dia.
22 20621.0000 6 Plug, Hole .203" Dia.
23 26667.0000 1 Pad, Hopper Retaining (Self Adhesive)
24 13255.0003 1 Kit, Leg 4.0" Adjustable (Includes 4 each of items 20 & 21) (Not illustrated)
5
26531.1 021502
BUNN
®
DOOR, LAMPS AND PANELS
HC-1
15
18
1
17
11
2
3
6
7
8
16
4
5
6
7
8
9 10 11 12 14 13
P916
6
26531.1 060500
Loading...
+ 14 hidden pages