Bunn COMBO GRINDER Parts Manual
BUNN
®
COMBO
GRINDER
ILLUSTRATED PARTS CATALOG
Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
are subject to change without notice.
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
26938.0000 2/00 ©1996 Bunn-O-Matic Corporation
WARRANTY
Bunn-O-Matic Corp. (“Bunn”) warrants the equipment manufactured by it to be commercially free from defects
in material and workmanship existing at the time of manufacture and appearing within one year from the date of
installation. In addition:
1.) Bunn warrants electronic circuit and/or control boards to be commercially free from defects in material and
workmanship for two years from the date of installation.
2.) Bunn warrants the compressor on refrigeration equipment to be commercially free from defects in material
and workmanship for two years from the date of installation.
3.) Bunn warrants that the grinding burrs on coffee grinding equipment will grind coffee to meet original factory
screen sieve analysis for three years from date of installation or for 30,000 pounds of coffee, whichever comes first.
This warranty does not apply to any equipment, component or part that was not manufactured by Bunn or that,
in Bunn’s judgement, has been affected by misuse, neglect, alteration, improper installation or operation, improper
maintenance or repair, damage or casualty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR
ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of Bunn are
not authorized to make modifications to this warranty or to make additional warranties that are binding on Bunn.
Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not
be relied upon.
The Buyer shall give Bunn prompt notice of any claim to be made under this warranty by telephone at (217)
529-6601 or by writing to Post Office Box 3227, Springfield, Illinois, 62708-3227. If requested by Bunn, the Buyer
shall ship the defective equipment prepaid to an authorized Bunn service location. If Bunn determines, in its sole
discretion, that the equipment does not conform to the warranty, Bunn shall repair the equipment with no charge
for parts during the warranty period and no charge for labor by a Bunn Authorized Service Representative during
the warranty period. If Bunn determines that repair is not feasible, Bunn shall, at its sole option, replace the
equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE
OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AS
SPECIFIED HEREIN, TO REPAIR OR, AT BUNN’S SOLE OPTION, REPLACEMENT OR REFUND.
In no event shall Bunn be liable for any other damage or loss, including, but not limited to, lost profits, lost sales,
loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute
equipment, facilities or services, or any other special, incidental or consequential damages.
2
26938 022900
TABLE OF CONTENTS
TITLE PAGE NO.
Hopper Lid and Slide Plate Assembly ............................................................................................................................................6
Housing and Panels.......................................................................................................................................................................4
Motor, Burr Housing and Bracket ................................................................................................................................................10
Numerical Index ..........................................................................................................................................................................14
3
26938 022900
BUNN
5
4
3
®
HOUSING AND PANELS
COMBO
GRINDER
2
6
1
7
8
9
14
DECAFFEINATED COFFEE
12
13
21620.1007
01380.0001(2)
01518.0000(2)
24240.0000
10
11
P722
4
26938 022900
HOUSING AND PANELS
ITEM PART NO. QTY. DESCRIPTION
1 25780.0000 1 Housing Assy W/Decal (Includes items 6 & 9) (SST)
25436.0002 1 Housing Wldmt, Upper (Black) (Also order Items 6 & 9)
2 05844.1003 1 Rear Panel W/Decal (Includes item 3 & 4) (SST)
05844.0004 1 Panel. Rear - Combo G/B (Black) (Also order items 3 & 4)
01315.0000 8 Screw, Truss Head #8-32 x .375”(SST)
02322.0002 8 Screw, TRH Sltd Blk OXD 8-32 (BLK)
00917.0000 8 Fastener, J-Type #8-32
3 26227.0000 1 Decal, Model Combo Grinder Use With Model Combo Brewer
4 05884.0000 1 Decal, Motor Reset
5 02999.0000 1 Plug, Hole 1.19” Dia.(SST)
25126.0000 1 Plug, Hole 1-19 Dia. (BLK)
6 05814.0001 3 Window Assy (Includes adhesive)
7 01315.0000 1 Screw, Truss Head #8-32 x .375”
8 05827.0000 1 Plate, Switch Shield
02308.0000 2 Screw, Pan Head #8-32 x .375”
00912.0000 2 Fastener, J-Type #8-32
9 25484.0000 1 Decal, Control Panel
10 21620.1009 1 Cover Assy W/Decal (Includes screws and washers below and item 11)
01382.0002 2 Screw, Truss Head BLK #6-32 x .375”
01518.0000 2 Washer, Screw Retaining #6
11 26079.0000 1 Decal, Precision Grinding & Brewing
12 00879.0000 1 Decal, Decaffeinated Coffee (As required)
13 05940.0000 1 Decal, Orange Dot (As required)
14 05789.0000 1 Switch, Hopper Selector
15 25758.0000 1 Wiring Harness, Grinder (Not illustrated)
5
26938 022900
Loading...