Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Copyright© 2014 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
read this material before using this product. Failure to do so can result in serious injury. SaVe tHiS ManUaL.
Safety
Table of Contents
Safety......................................................... |
2 |
Specifications............................................ |
5 |
Set up - Before Use:.................................. |
6 |
Receiver Components and Controls.......... |
6 |
Camera Components and Controls............ |
8 |
Viewing Modes.......................................... |
10 |
Menu > Recording.......... |
10 |
Connecting A/V Output.............................. |
11 |
Operating Instructions............................. |
12 |
Receiver Functions................................... |
12 |
Display Functions...................................... |
13 |
Manual Recording..................................... |
14 |
Video Motion Detection............................. |
14 |
Using Screen Saver.................................. |
14 |
Using Intercom.......................................... |
15 |
Playback and Delete................................. |
16 |
Remote Viewing through Skype™............ |
17 |
Maintenance Instructions........................ |
18 |
Troubleshooting....................................... |
18 |
FCC Notice................................................ |
19 |
Limited 90 Day Warranty......................... |
20 |
Settings
Operation
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Addresses practices not related to personal injury.
Symbology
|
Double Insulated |
|
V |
Volts |
|
|
|
||
|
|
|
|
|
|
Canadian Standards Association |
|
~ |
Alternating Current |
|
|
|
||
|
|
|
|
|
|
Underwriters Laboratories, Inc. |
|
A |
Amperes |
|
|
|
||
|
|
|
|
|
Network
IMPORTANT SAFETY INFORMATION
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Page 2 |
For technical questions, please call 1-888-866-5797. |
Item 62368 |
Installation Precautions
1. |
Check federal, state and local |
4. |
Wear ANSI-approved safety goggles |
|
|
surveillance laws before installing video |
|
during installation. |
|
|
and/or audio surveillance equipment. |
5. |
Keep installation area clean and well lit. |
|
2. |
Install only according to these instructions. |
|||
6. |
Keep children and bystanders out of |
|||
|
Improper installation can create hazards. |
|||
3. |
Do not overreach when installing this product. |
|
the area during installation. |
|
7. |
Do not install when tired or when under the |
|||
|
Keep proper footing and balance at all times. |
|||
|
This enables better control in unexpected situations. |
|
influence of alcohol, drugs or medication. |
|
Use Precautions |
|
|
||
|
|
|
|
|
1. |
This product is not a toy. Do not allow |
4. |
Maintain product labels and nameplates. |
|
|
children to play with or near this item. |
|
These carry important safety information. |
|
2. |
Use as intended only. |
|
If unreadable or missing, contact |
|
|
Harbor Freight Tools for a replacement. |
|||
3. |
Do not modify. |
|
|
Electrical Safety
1.Power Adapter plug must match the outlet. Never modify the plug in
any way. Unmodified plugs and matching outlets will reduce risk of electric shock.
2.Do not expose Receiver to rain or wet conditions. Water entering the Receiver will increase the risk of electric shock.
3.Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the Receiver. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
Service
Have your Surveillance equipment serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the equipment is maintained.
Camera Safety Warnings
1.To prevent electric shock, do not attempt to disassemble Cameras. There are
no serviceable parts inside.
2.Use supplied Power Adapters only.
3.Do not expose the Power Adapters to rain or wet conditions. Water entering the Power Adapters will increase the risk of electric shock.
4.Do not abuse the Power Adapter cords. Never use the cords for unplugging the plug from the outlet. Keep cords away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
5.Handle Cameras with care. Cameras could be damaged by improper handling or storage.
Safety
Settings
Operation
Network
Item 62368 |
For technical questions, please call 1-888-866-5797. |
Page 3 |
Safety
Settings
Receiver Safety Warnings
1.Maintain adequate airflow around Receiver.
2.Use supplied Power Adapter only.
3.Do not expose the Power Adapter or Receiver to rain or wet conditions. Water entering the Power Adapter or Receiver will increase the risk of electric shock.
4.Do not abuse the Power Adapter cord. Never use the cord for unplugging the plug from the outlet. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
5.Maintain labels and nameplates on the unit. These carry important safety
information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
6.People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
7.WARNING: The cord of this product contains lead and/or di (2-ethylhexyl) phthalate (DEHP), chemicals known to the State of California
to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.)
8.WARNING: This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.)
9.The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
Operation
Network
Grounding
TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION:
Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the Power Adapter plugs provided. Do not use the equipment if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
1. The included Power Adapters do not require grounding.
2. The Power Adapters may be used in either of the 120 volt outlets shown in the preceding illustration. (See Figure A.)
Figure A
Extension Cords
Note: Do not use extension cords with the Power Adapters.
Page 4 |
For technical questions, please call 1-888-866-5797. |
Item 62368 |
Specifications
Receiver
Screen |
7" 4-Channel Color LCD |
|
Video Standard |
NTSC / PAL |
|
Modulation |
GFSK |
|
Data Rate |
2 Mbps |
|
Resolution |
10fps @ 640 x 480 |
|
25fps @ 320 x 240 |
||
|
||
Audio |
Built-in Microphone |
|
Speaker |
||
|
||
|
Scheduled |
|
Recording |
Manual |
|
|
Motion Detection |
|
Power Rating |
5VDC / 2A |
|
Operating Temperature |
14° - 104°F |
|
Camera Capacity |
4 |
|
Memory |
SD Card (not included) |
|
|
|
|
Cameras |
|
|
Lens |
1/4" VGA CMOS |
|
Effective Pixels |
640H x 480V |
|
Night Vision Type |
Infrared LEDs with Low Light Sensor |
|
Image Type |
Daylight: Color |
|
|
Infrared: Black & White |
|
Infrared Wavelength |
850nm |
|
Audio |
Built-in Microphone |
|
|
Speaker |
|
Wireless Range |
180 ft (indoors) 650 ft (outdoors) |
|
Ingress Protection Rating |
IP54 - Dustproof, Splashproof |
|
Night Vision Range |
40 ft |
|
Audio/Video Connector |
RCA |
|
Power Rating |
9VDC / 600 mA |
|
Operating Temperature |
14° - 122°F |
|
Transmission Frequency |
2.4 GHz |
Safety
Settings
Operation
Network
Item 62368 |
For technical questions, please call 1-888-866-5797. |
Page 5 |
Safety
SETTINGS
Operation
Network
Set up - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Receiver Components and Controls
Back
|
Power |
Antenna |
Mounting |
|
|
Switch |
Connector |
Hole |
Speaker |
Zoom |
|
|
|
Memory |
|
|
|
|
Card Slot |
|
|
ON |
|
|
Delete |
X |
OFF |
|
Mini-B |
|
|
|
||
|
|
|
|
USB Port |
AV |
|
|
|
RCA |
Output |
|
|
|
|
|
|
|
AV Out |
|
|
|
|
|
|
|
|
|
|
Port |
|
Microphone |
5VDC |
Stand |
|
|
Power Input |
|
|
Figure B
Accessories
|
Mounting |
|
USB to |
Hardware |
Mounting |
|
||
Mini-B Cable |
|
Bracket |
|
Driver CD |
5VDC Power |
|
Adapter |
RCA A/V |
|
|
|
Cable |
Figure C
Page 6 |
For technical questions, please call 1-888-866-5797. |
Item 62368 |