Buick Enclave 1 2015 Owner's Manual

Download

Page 1

Page 2

Black plate (1,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

2015 Buick Enclave Owner Manual M

In Brief . . . . .. . . .. . . .. . . .. . . .. . . 1-1

Instrument Panel . . .. . . . . . . . . . . 1-2

Initial Drive Information . . . . . . . . 1-4

Vehicle Features . . . . . . . . . . . . . 1-14

Performance and

Maintenance . . . . . . . . . . . . . . . . 1-21

Keys, Doors, and

Windows .. . . . . . . . . . . . . . . . . . . 2-1

Keys and Locks . . . . . . . . . . . . . . . 2-1

Doors . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Vehicle Security . . . . . . . . . . . . . . 2-11

Exterior Mirrors . . . . . . . . . . . . . . . 2-14

Interior Mirrors . . . . . . . . . . . . . . . . 2-16

Windows . . . . . . . . . . . . . . . . . . . . . 2-16

Roof . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19

Seats and Restraints . . . . . . . . . 3-1

Head Restraints . . . . . . . . . . . . . . . 3-2

Front Seats . . . . . . . . . . . . . . . . . . . . 3-3

Rear Seats . . . . . . . . . . . . . . . . . . . . 3-8

Safety Belts . . . . . . . . . . . . . . . . . . 3-13

Airbag System . . . . . . . . . . . . . . . . 3-21

Child Restraints . . . . . . . . . . . . . . 3-35

Storage . . . . . . . . . . . . . . . . . . . . . . . 4-1

Storage Compartments . . . . . . . . 4-1

Additional Storage Features . . . 4-3

Roof Rack System . . . . . . . . . . . . . 4-5

Instruments and Controls . . . . 5-1

Controls . . . . . . . . . . . . . . . . . . . . . . . 5-2

Warning Lights, Gauges, and

Indicators . . . . . . . . . . . . . . . . . . . . 5-9

Information Displays . . . . . . . . . . 5-23

Vehicle Messages . . . . . . . . . . . . 5-29

Vehicle Personalization . . . . . . . 5-38

Universal Remote System . . . . 5-45

Lighting .. . . . . . . . . . . . . . . . . . . . . . 6-1

Exterior Lighting . . . . . . . . . . . . . . . 6-1

Interior Lighting . . . . . . . . . . . . . . . . 6-4

Lighting Features . . . . . . . . . . . . . . 6-6

Infotainment System . . . . . . . . . 7-1

Introduction . . . . . . . . . . . . . . . . . . . . 7-1

Radio . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6

Audio Players . . . . . . . . . . . . . . . . 7-11

Rear Seat Infotainment . . . . . . . 7-15

Phone . . . . . . . . . . . . . . . . . . . . . . . . 7-17

Settings . . . . . . . . . . . . . . . . . . . . . . 7-24

Trademarks and License

Agreements . . . . . . . . . . . . . . . . . 7-26

Climate Controls . . . . . . . . . . . . . 8-1

Climate Control Systems . . . . . . 8-1

Air Vents. . . . . . . . . . . . . . . . . . . . . . . 8-8

Maintenance . . . . . . . . . . . . . . . . . . . 8-9

Driving and Operating . . . . . . . . 9-1

Driving Information . . . . . . . . . . . . . 9-2

Starting and Operating . . . . . . . 9-14

Engine Exhaust . . . . . . . . . . . . . . 9-21

Automatic Transmission . . . . . . 9-22

Drive Systems . . . . . . . . . . . . . . . . 9-26

Brakes . . . . . . . . . . . . . . . . . . . . . . . 9-26

Ride Control Systems . . . . . . . . 9-28

Cruise Control . . . . . . . . . . . . . . . . 9-30

Driver Assistance Systems . . . 9-33

Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 9-42

Trailer Towing . . . . . . . . . . . . . . . . 9-46

Conversions and Add-Ons . . . 9-53

Page 3

Black plate (2,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

2015 Buick Enclave Owner Manual M

Vehicle Care . . . . . . . . . . . . . . . . . 10-1

General Information . . . . . . . . . . 10-2

Vehicle Checks . . . . . . . . . . . . . . . 10-3

Headlamp Aiming . . . . . . . . . . . 10-25

Bulb Replacement . . . . . . . . . . 10-26

Electrical System . . . . . . . . . . . . 10-27

Wheels and Tires . . . . . . . . . . . 10-35

Jump Starting . . . . . . . . . . . . . . . 10-66

Towing the Vehicle. . . . . . . . . . 10-70

Appearance Care . . . . . . . . . . . 10-73

Service and Maintenance . . . 11-1

General Information . . . . . . . . . . 11-1

Maintenance Schedule . . . . . . . 11-3

Special Application

Services . . . . . . . . . . . . . . . . . . . . 11-8

Additional Maintenance

and Care . . . . . . . . . . . . . . . . . . . . 11-8

Recommended Fluids,

Lubricants, and Parts . . . . . . 11-12

Maintenance Records . . . . . . . 11-14

Technical Data . . . . . . . . . . . . . . . 12-1

Vehicle Identification . . . . . . . . . 12-1

Vehicle Data . . . . . . . . . . . . . . . . . . 12-2

Customer Information . . . . . . . 13-1

Customer Information . . . . . . . . 13-1

Reporting Safety Defects . . . . 13-12

Vehicle Data Recording and

Privacy . . . . . . . . . . . . . . . . . . . . 13-14

OnStar . . . . . . . . . . . . . . . . . . . . . . . 14-1

OnStar Overview. . . . . . . . . . . . . 14-1

OnStar Services . . . . . . . . . . . . . . 14-2

OnStar Additional

Information . . . . . . . . . . . . . . . . . . 14-6

Index . . . . . . . . . . . . . . . . . . . . . i-1

Page 4

Black plate (3,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Introduction iii

This manual describes features that may or may not be on the vehicle because of optional equipment that was not purchased on the vehicle, model variants, country specifications, features/applications

The names, logos, emblems, slogans, vehicle model names, and vehicle body designs appearing in this manual including, but not limited to, GM, the GM logo, BUICK, the BUICK Emblem, and ENCLAVE are trademarks and/or service marks of General Motors LLC, its subsidiaries, affiliates, or licensors.

For vehicles first sold in Canada, substitute the name “General Motors of Canada Limited” for Buick Motor Division wherever it appears in this manual.

Litho in U.S.A. Part No. 23121147 B Second Printing

that may not be available in your region, or changes subsequent to the printing of this owner manual.

Refer to the purchase documentation relating to your specific vehicle to confirm the features.

Keep this manual in the vehicle for quick reference.

Canadian Vehicle Owners

Propriétaires Canadiens

A French language manual can be obtained from your dealer, at www.helminc.com, or from:

On peut obtenir un exemplaire de ce guide en français auprès du concessionnaire ou à l'adresse savant:

Helm, Incorporated Attention: Customer Service 47911 Halyard Drive Plymouth, MI 48170

Using this Manual

To quickly locate information about the vehicle, use the Index in the back of the manual. It is an alphabetical list of what is in the manual and the page number where it can be found.

Page 5

Black plate (4,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

iv Introduction

Danger, Warnings, and Cautions

Warning messages found on vehicle labels and in this manual describe hazards and what to do to avoid or reduce them.

Danger

{

Danger indicates a hazard with a high level of risk which will result in serious injury or death.

Warning

{

Warning indicates a hazard that could result in injury or death.

A circle with a slash through it is a safety symbol which means “Do Not,” “Do not do this,” or “Do not let this happen.”

Symbols

The vehicle has components and labels that use symbols instead of text. Symbols are shown along with the text describing the operation or information relating to a specific component, control, message, gauge, or indicator.

M : This symbol is shown when

you need to see your owner manual

Caution

{

Caution indicates a hazard that could result in property or vehicle damage.

for additional instructions or information.

* : This symbol is shown when

you need to see a service manual for additional instructions or information.

Vehicle Symbol Chart

Here are some additional symbols that may be found on the vehicle and what they mean. For more information on the symbol, refer to the Index.

9 : Airbag Readiness Light ! : Antilock Brake System (ABS) % : Audio Steering Wheel Controls

or OnStar

(if equipped)

$ : Brake System Warning Light " : Charging System

I : Cruise Control

B : Engine Coolant Temperature

O : Exterior Lamps

# : Fog Lamps

. : Fuel Gauge

+ : Fuses

3 : Headlamp High/Low-Beam

Changer

j : LATCH System Child

Restraints

Page 6

Black plate (5,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

* : Malfunction Indicator Lamp : : Oil Pressure

g : Outside Power Foldaway

Mirrors

} : Power / : Remote Vehicle Start > : Safety Belt Reminders 7 : Tire Pressure Monitor _ : Tow/Haul Mode t : Traction Control/StabiliTrak M : Windshield Washer Fluid

Introduction v

Page 7

Black plate (6,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

vi Introduction

2 NOTES

Page 8

Black plate (1,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

In Brief 1-1

In Brief

Instrument Panel

Instrument Panel . . . . . . . . . . . . . . 1-2

Initial Drive Information

Initial Drive Information . . . . . . . . 1-4

Remote Keyless Entry (RKE)

System . . . . . . . . . . . . . . . . . . . . . . 1-4

Remote Vehicle Start . . . . . . . . . 1-4

Door Locks . . . . . . . . . . . . . . . . . . . 1-5

Liftgate . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Windows . . . . . . . . . . . . . . . . . . . . . . 1-6

Seat Adjustment . . . . . . . . . . . . . . 1-6

Memory Features . . . . . . . . . . . . . 1-7

Second Row Seats . . . . . . . . . . . 1-7

Third Row Seats . . . . . . . . . . . . . . 1-7

Heated and Cooled Front

Seats . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Head Restraint Adjustment . . . . 1-9

Safety Belts . . . . . . . . . . . . . . . . . . . 1-9

Passenger Sensing System . . . 1-9

Mirror Adjustment . . . . . . . . . . . . 1-10

Steering Wheel

Adjustment . . . . . . . . . . . . . . . . . 1-10

Interior Lighting . . . . . . . . . . . . . . 1-11

Exterior Lighting . . . . . . . . . . . . . 1-12

Windshield Wiper/Washer . . . . 1-12

Climate Controls . . . . . . . . . . . . . 1-13

Transmission . . . . . . . . . . . . . . . . 1-14

Vehicle Features

Infotainment System . . . . . . . . . 1-14

Radio(s) . . . . . . . . . . . . . . . . . . . . . 1-15

Satellite Radio . . . . . . . . . . . . . . . 1-16

Portable Audio Devices . . . . . . 1-17

Bluetooth

Steering Wheel Controls . . . . . 1-17

Cruise Control . . . . . . . . . . . . . . . 1-18

Forward Collision Alert (FCA)

System . . . . . . . . . . . . . . . . . . . . . 1-18

Lane Departure

Warning (LDW) . . . . . . . . . . . . . 1-19

. . . . . . . . . . . . . . . . . . . 1-17

Side Blind Zone

Alert (SBZA) . . . . . . . . . . . . . . . 1-19

Rear Vision

Camera (RVC) . . . . . . . . . . . . . 1-19

Rear Cross Traffic Alert

(RCTA) System . . . . . . . . . . . . 1-19

Parking Assist . . . . . . . . . . . . . . . 1-19

Power Outlets . . . . . . . . . . . . . . . 1-19

Universal Remote System . . . 1-20

Sunroof . . . . . . . . . . . . . . . . . . . . . . 1-20

Performance and Maintenance

Traction Control/Electronic

Stability Control . . . . . . . . . . . . 1-21

Tire Pressure Monitor . . . . . . . . 1-21

Engine Oil Life System . . . . . . 1-21

Driving for Better Fuel

Economy . . . . . . . . . . . . . . . . . . . 1-22

Roadside Assistance

Program . . . . . . . . . . . . . . . . . . . . 1-22

OnStar

. . . . . . . . . . . . . . . . . . . . . 1-22

Page 9

Black plate (2,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

1-2 In Brief

Instrument Panel

Page 10

Black plate (3,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

In Brief 1-3

1. Air Vents on page 8-8.

2. Turn Signal Lever. See Turn and

Lane-Change Signals on page 6-4.

Windshield Wiper/Washer on page 5-3.

3. Instrument Cluster on page 5-10.

4. Clock on page 5-6.

5. Instrument Panel Storage on page 4-1.

6. Infotainment on page 7-1.

7. Exterior Lamp Controls on page 6-1.

8. Hood Release. See Hood on page 10-4.

9. Parking Brake on page 9-27.

10. Data Link Connector (DLC)

(Out of View). See Malfunction Indicator Lamp on page 5-15.

11. Dome Lamp Override. See

Dome Lamps on page 6-5.

Instrument Panel Illumination Control on page 6-4.

12. Cruise Control on page 9-30.

13. Steering Wheel Adjustment on page 5-2.

14. Horn on page 5-3.

15. Steering Wheel Controls on page 5-3 (If Equipped).

16. Driver Information Center (DIC) Buttons. See Driver Information Center (DIC) on page 5-23.

17. Dual Automatic Climate Control System on page 8-1.

18. Shift Lever. See Shifting Into Park on page 9-19.

19. USB Port. See Auxiliary Devices on page 7-14.

20. Power Outlets on page 5-7.

21. Rear Window Wiper/Washer on page 5-4.

Traction Control System (TCS) Disable Button. See Traction

Control/Electronic Stability Control on page 9-28.

Forward Collision Alert (FCA) System on page 9-33 (If

Equipped).

Lane Departure Warning (LDW) on page 9-40 (If

Equipped).

Tow/Haul Button (If Equipped). See Tow/Haul Mode on page 9-25.

Power Liftgate Button (If Equipped). See Liftgate on page 2-8.

22. Heated and Cooled Front Seats on page 3-7 (If Equipped).

23. Hazard Warning Flashers on page 6-3.

24. Passenger Airbag Status Indicator. See Passenger Sensing System on page 3-28.

Page 11

Black plate (4,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

1-4 In Brief

Initial Drive Information

This section provides a brief overview about some of the important features that may or may not be on your specific vehicle.

For more detailed information, refer to each of the features which can be found later in this owner manual.

Remote Keyless Entry (RKE) System

The RKE transmitter is used to remotely lock and unlock the doors from up to 60 m (195 ft) away from the vehicle.

Press K to unlock the driver door.

K again within five seconds

Press to unlock all remaining doors.

Q to lock all doors.

Press

Lock and unlock feedback can be personalized.

To open or close the liftgate, press and hold

begins to move.

Press vehicle.

8 until the liftgate

L and release to locate the

L and hold for more than

Press two seconds to sound the panic alarm.

L again to cancel the panic

Press alarm.

See Remote Keyless Entry (RKE) System Operation on page 2-2.

Remote Vehicle Start

Starting the Vehicle

With this feature the engine can be started from outside of the vehicle.

1. Aim the RKE transmitter at the vehicle.

2. Press and release

3. Immediately after completing Step 2, press and hold

the parking lamps flash.

When the vehicle starts, the parking lamps will turn on and remain on as long as the engine is running. The doors will be locked and the climate control system may come on.

/ until

Page 12

Black plate (5,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

The engine will continue to run for 10 minutes. After 30 seconds, repeat the steps if a 10-minute extension is desired. Remote start can be extended only once.

Canceling a Remote Start

To cancel a remote start:

Aim the RKE transmitter at the vehicle and press and hold

until the parking lamps turn off.

Turn on the hazard warning flashers.

Turn the ignition switch on and then off.

See Remote Vehicle Start on page 2-4.

From the outside, turn the key toward the front or rear of the

vehicle, or press Remote Keyless Entry (RKE) transmitter.

Q or K on the

Power Door Locks

In Brief 1-5

Liftgate

To open the liftgate the vehicle must be in P (Park) and the battery must be charged. Press the touch pad under the liftgate handle and pull up. To close the liftgate, use the pull cup as an aid.

Power Liftgate

If equipped with a power liftgate, the vehicle must be in P (Park) to operate it.

Press and hold 8 on the Remote Keyless Entry (RKE) transmitter.

Door Locks

To lock or unlock a door manually:

From the inside, use the door lock knob on the window sill.

K : Press to unlock the doors. Q : Press to lock the doors.

See Power Door Locks on page 2-6.

Page 13

Black plate (6,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

1-6 In Brief

Windows

Press O.

Press the touch pad switch on the outside liftgate handle.

See Liftgate on page 2-8.

Uplevel Shown, Base Similar

Press the switch to lower the window. Pull the switch up to raise it.

For more information, see Power Windows on page 2-17.

Seat Adjustment

Power Seats

1. Seat Adjustment Control

2. Reclining Seatback Control

3. Lumbar Adjustment Control

To adjust the seat:

Move the seat forward or rearward by sliding the control (1) forward or rearward.

Page 14

Black plate (7,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Raise or lower the front part of the seat cushion by moving the front of the control (1) up or down.

Raise or lower the entire seat by moving the rear of the control (1) up or down.

See Power Seat Adjustment on page 3-3.

Adjust the seatback by tilting the top of the control (2) forward or rearward.

See Reclining Seatbacks on page 3-4.

Increase or decrease lumbar support by pressing the front or rear of the control (3).

See Lumbar Adjustment on page 3-4.

Memory Features

If available, the controls on the driver door are used to program and recall memory settings for the driver seat, outside mirrors, and power steering column, if available.

See Memory Seats on page 3-5 and

Vehicle Personalization on page 5-38.

In Brief 1-7

Second Row Seats

The second row seat can be folded to access the third row. Pull the sliding seat lever forward; the seat cushion folds, and the seat slides forward.

See Rear Seats on page 3-8.

Third Row Seats

The third row seatbacks can be folded forward, and the seats can be removed.

Page 15

Black plate (8,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

1-8 In Brief

To fold the third row seatback:

1. Remove anything on or under the seat.

2. Disconnect the rear safety belt mini-latch using a key in the slot on the mini-buckle, and let the belt retract into the headliner. Stow the mini-latch in the holder in the headliner.

3. Pull up on the release lever on the back of the seat.

4. Push the seatback forward to lay flat.

See Third Row Seats on page 3-10.

Heated and Cooled Front Seats

Heated and Cooled Seat Buttons

Shown, Heated Seat Buttons

Similar

If equipped, the buttons are on the center stack. To operate, the engine must be running.

I : If equipped, press to heat the

seatback only.

H : If equipped, press to cool the

entire seat.

J : Press to heat the seat and

seatback.

Page 16

Black plate (9,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

In Brief 1-9

Press the button once for the highest setting. With each press of the button, the seat will change to the next lower setting, and then to the off setting. The lights indicate three for the highest setting and one for the lowest.

See Heated and Cooled Front Seats on page 3-7.

Head Restraint Adjustment

Do not drive until the head restraints for all occupants are installed and adjusted properly.

To achieve a comfortable seating position, change the seatback recline angle as little as necessary while keeping the seat and the head restraint height in the proper position.

See Head Restraints on page 3-2 and Power Seat Adjustment on page 3-3.

Safety Belts

Refer to the following sections for important information on how to use safety belts properly:

Safety Belts on page 3-13.

How to Wear Safety Belts Properly on page 3-14.

Lap-Shoulder Belt on page 3-15.

Lower Anchors and Tethers for Children (LATCH System) on page 3-43.

Passenger Sensing System

United States

Canada and Mexico

The passenger sensing system will turn off the front outboard passenger frontal airbag under certain conditions. No other airbag is affected by the passenger sensing system. See Passenger

Sensing System on page 3-28

Page 17

Black plate (10,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

1-10 In Brief

The passenger airbag status indicator will light on the instrument panel when the vehicle is started. See Passenger Airbag Status Indicator on page 5-14.

Mirror Adjustment

Exterior Mirrors

To adjust each mirror:

1. Press (1) or (2) to select the mirror.

2. Press the control pad to adjust the mirror.

3. Press (1) or (2) again to deselect the mirror.

Folding Mirrors

For vehicles with power folding mirrors:

1. Press (3) to fold the mirrors out to the driving position.

2. Press (4) to fold the mirrors in to the folded position.

For vehicles with manual folding mirrors, push the mirror toward the vehicle. Pull the mirror out to return to its original position.

Interior Mirror

Adjustment

Adjust the rearview mirror to clearly view the area behind the vehicle.

The mirror will automatically reduce the glare from the headlamps from behind. The dimming feature comes on when the vehicle is started. See

Automatic Dimming Rearview Mirror on page 2-16.

Steering Wheel Adjustment

1. Pull the lever down.

2. Move the steering wheel up or down.

3. Pull or push the steering wheel closer or away from you.

4. Push the lever up to lock the steering wheel in place.

Page 18

Black plate (11,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

In Brief 1-11

Power Tilt Wheel

For vehicles with the power tilt and telescopic wheel, the control is on the outboard side of the steering column.

Push the control up or down to tilt the steering wheel up or down.

Push the control forward or rearward to move the steering wheel toward the front or rear of the vehicle. To set the memory position, see Vehicle Personalization on page 5-38.

Do not adjust the steering wheel while driving.

Interior Lighting

Dome Lamps

The dome lamps are in the overhead console and above the rear seat passengers.

The dome lamps come on when a door is opened, unless the dome lamp override button is pressed in.

To manually turn them on, turn the instrument panel brightness control clockwise to the farthest position.

Dome Lamp Override

The dome lamp override button is next to the exterior lamps control.

E DOME OFF: Press the button and the dome lamps remain off when a door is opened. An indicator light on the button comes on to show that the dome lamps are off. Press the button again so the dome lamps come on when a door is opened.

AMBIENT OFF (If Equipped):

Press the button to turn the ambient lights off. Press the button again to turn ambient lights on.

Page 19

Black plate (12,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

1-12 In Brief

Reading Lamps

Press the button near each lamp to turn them on or off.

For more information, see:

Dome Lamps on page 6-5.

Instrument Panel Illumination Control on page 6-4.

Exterior Lighting

The exterior lamp control is on the instrument panel, to the left of the steering wheel.

O : Briefly turn to this position to

turn the automatic light control off or on again.

AUTO: Turns the headlamps on automatically at normal brightness, together with the other exterior lamps and instrument panel lights.

; : Turns on the parking lamps

including all lamps, except the headlamps.

5 : Turns on the headlamps

together with the parking lamps and instrument panel lights. A warning chime sounds if the driver door is opened when the ignition switch is off and the headlamps are on.

See:

Exterior Lamp Controls on page 6-1

Daytime Running Lamps (DRL)/ Automatic Headlamp System on page 6-2

Windshield Wiper/Washer

The windshield wiper/washer lever is located on the left side of the steering column.

Turn the band with the wiper symbol to control the windshield wipers.

8 : Use for a single wiping cycle.

OFF: Use to turn the wipers off.

6 : Delays wiping cycle. Turn the

band up for more frequent wipes or down for less frequent wipes.

LO: Slow wipes.

HI: Fast wipes.

Windshield Washer

J FRONT: Press the button at the

end of the lever to spray washer fluid on the windshield.

Page 20

Black plate (13,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

In Brief 1-13

Rear Window Wiper/Washer

The rear wiper and rear wash button is on the center stack below the climate control system.

Z : Press to turn the rear wiper on

and off. The wiper speed cannot be changed.

Y : Press to spray washer fluid on

the rear window. The window wiper will also come on.

See Windshield Wiper/Washer on

page 5-3 and Rear Window Wiper/ Washer on page 5-4.

Climate Controls

1. Driver and Passenger Side Temperature Controls

2. Air Delivery Mode Controls

3. SYNC (Synchronized Temperature)

4. AUTO (Automatic Operation)

5. REAR (Rear Climate Control)

6. Defrost

7. Rear Window Defogger

8. Fan Control

9. Recirculation

10. A/C (Air Conditioning)

See Dual Automatic Climate Control System on page 8-1. For more information about the rear climate control, see Rear Climate Control

System on page 8-6 or Rear Climate Control System (with Rear Seat Audio) on page 8-7.

Page 21

Black plate (14,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

1-14 In Brief

Transmission

Electronic Range Select (ERS) Mode

ERS mode allows you to choose the top-gear limit of the transmission and the vehicle's speed while driving downhill or towing a trailer. The vehicle has an electronic shift position indicator within the instrument cluster. When using the ERS mode a number will display next to the L, indicating the current gear that has been selected.

To use this feature:

1. Move the shift lever to L (Low).

2. Press the plus/minus button on the shift lever, to increase or decrease the gear range available.

See Manual Mode on page 9-24.

Vehicle Features

Infotainment System

If the vehicle has a base radio it is included in this manual. See the separate infotainment manual for information on the connected radios, audio players, phone, navigation system, and voice or speech recognition. There is also information on settings and downloadable applications (if equipped).

Page 22

Black plate (15,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

In Brief 1-15

Radio(s)

PUSH /O : Press to turn the

system on and off. Turn to adjust the volume.

Z : Press to eject a disc from the

CD player. See CD Player on page 7-11.

AUX Port: 3.5 mm (1/8 in) connection for external audio devices.

PUSH/SEL: Turn to manually find a station or highlight a menu selection. Press to select a highlighted selection.

D : Press to go to the Home Page.

See “Home Page” in Operation on page 7-3.

SRCE: Press to switch between AM, FM, CD, and if equipped, SiriusXM auxiliary, and iPod/USB.

Press and hold to mute/pause the system.

FAV: Press to display the favorite list or add a favorite. See Operation on page 7-3.

, front auxiliary, rear

stations and tracks. See Operation on page 7-3.

/ BACK: Press to return to the

previous screen in a menu.

Storing Radio Station Presets

Up to 30 preset stations can be stored. AM, FM, and SiriusXM (if equipped) can be mixed.

1. From the AM, FM, or SiriusXM main page, press and hold any 1−5 buttons or one of the preset screen buttons at the

Page 23

Black plate (16,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

1-16 In Brief

bottom of the screen. After a few seconds, a beep is heard and the new preset information displays on that screen button.

2. Repeat for each preset.

See AM-FM Radio on page 7-6.

Setting the Clock

Press Settings on the Home Page, then press the Set Time or Set Date settings screen button to display the different options for setting the time and date.

Set Time:

Press the up or down arrows to change the Hours, Minutes, AM, PM, or the 24 hour setting on the clock.

Press and hold to quickly increase or decrease the time settings.

Press OK to save the adjustments.

Press the Back or Cancel screen button to cancel the adjustments.

Set Date:

Press the up or down arrows to increase or decrease the Month, Day, and Year settings.

Press and hold to quickly increase or decrease the date settings.

Press OK to save the adjustments.

Press the Back or Cancel screen button to cancel the adjustments.

Setting the Analog Clock

The analog clock is on the instrument panel above the radio. The clock is not connected with any other vehicle system and runs by itself. To adjust the time:

1. Press and hold the button directly above the clock to advance the clock hands. Holding the button down causes the clock to advance faster.

2. Press and release the button to increase the time by one minute increments.

Satellite Radio

If equipped, vehicles with a SiriusXM valid SiriusXM satellite radio subscription can receive SiriusXM programming.

satellite radio tuner and a

Page 24

Black plate (17,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

In Brief 1-17

SiriusXM Satellite Radio Service

SiriusXM is a satellite radio service based in the 48 contiguous United States and 10 Canadian provinces. SiriusXM satellite radio has a wide variety of programming and commercial-free music, coast to coast, and in digital-quality sound. A fee is required to receive the SiriusXM service.

Refer to:

www.siriusxm.com or call 1-866-635-2349 (U.S.).

www.xmradio.ca or call 1-877-209-0079 (Canada).

See Satellite Radio on page 7-9.

Portable Audio Devices

The vehicle has a 3.5 mm (1/8 in) auxiliary input jack on the faceplate and a USB port in the center stack. External devices such as iPods, laptop computers, MP3 players, CD changers, USB storage devices, etc. can be connected to the

auxiliary port using a 3.5 mm (1/8 in) input jack or the USB port depending on the audio system.

If equipped, there are two USB ports on the rear of the center console that can be used for charging only. They can charge devices that draw 2.1 amps or less. See the device’s owner manual for the specification.

See Auxiliary Devices on page 7-14.

Bluetooth

The Bluetooth®system allows users with a Bluetooth-enabled mobile phone to make and receive hands-free calls using the vehicle audio system and controls.

The Bluetooth-enabled mobile phone must be paired with the in-vehicle Bluetooth system before it can be used in the vehicle. Not all phones will support all functions.

See Bluetooth on page 7-17.

Steering Wheel Controls

w or c /x : Press to change

favorite radio stations, select tracks on a CD, or navigate tracks or folders on an iPod or USB device.

b /g : Press to interact with

Bluetooth and OnStar

, if equipped.

c /x : Press to reject an

incoming call, or end a current call.

Page 25

Black plate (18,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

1-18 In Brief

SRCE: Press to switch between

AM, FM, CD, and if equipped, SiriusXM auxiliary, and iPod/USB.

Press and hold to mute/pause the system.

, front auxiliary, rear

¨ : Press to seek the next radio

station, track, or chapter while sourced to the CD slot, or to select tracks and folders on an iPod or USB device.

e or − e : Press to increase or to

decrease the volume.

See Steering Wheel Controls on page 5-3.

Cruise Control

T : Press to turn cruise control on

or off. The indicator light on the button comes on when the cruise control is on.

+RES: If there is a set speed in memory, press briefly to resume to that speed or press and hold to accelerate. If cruise control is already active, use to increase vehicle speed.

SET–: Press briefly to set the speed and activate cruise control. If cruise control is already active, use to decrease vehicle speed.

[ : Press to disengage cruise

control without erasing the set speed from memory.

See Cruise Control on page 9-30.

Forward Collision Alert (FCA) System

If equipped, FCA may help avoid or reduce the harm caused by front-end crashes. FCA provides a

green indicator, is detected ahead. This indicator displays amber if you follow a vehicle much too closely. When approaching a vehicle ahead too quickly, FCA provides a red flashing alert on the windshield and rapidly beeps.

See Forward Collision Alert (FCA) System on page 9-33.

V, when a vehicle

Page 26

Black plate (19,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

In Brief 1-19

Lane Departure Warning (LDW)

If equipped, LDW may help avoid unintentional lane departures at speeds of 56 km/h (35 mph) or greater. LDW uses a camera sensor to detect the lane markings. The

LDW light, marking is detected. If the vehicle departs the lane, the light will change to amber and flash. In addition, beeps will sound.

See Lane Departure Warning (LDW) on page 9-40.

@, is green if a lane

Side Blind Zone Alert (SBZA)

If equipped, SBZA will detect vehicles in the next lane over in the vehicle's side blind zone area. When this happens, the SBZA display will light up in the corresponding outside side mirror and will flash if the turn signal is on.

See Side Blind Zone Alert (SBZA) on page 9-36.

Rear Vision Camera (RVC)

If equipped, RVC displays a view of the area behind the vehicle, on the center stack display, when the vehicle is shifted into R (Reverse).

See Rear Vision Camera (RVC) on page 9-38.

Rear Cross Traffic Alert (RCTA) System

If equipped, the RCTA system uses a triangle with an arrow displayed on the RVC screen to warn of traffic behind your vehicle that may cross your vehicle's path while in R (Reverse). In addition, beeps will sound.

See “Rear Cross Traffic Alert (RCTA)” under Rear Vision Camera (RVC) on page 9-38.

Parking Assist

If equipped, this system uses sensors on the rear bumper to assist with parking and avoiding objects while in R (Reverse). It operates at speeds less than 8 km/h (5 mph). Rear Parking Assist (RPA) uses audible beeps to provide distance and system information.

Keep the sensors on the vehicle's rear bumper clean to ensure proper operation.

See Parking Assist on page 9-35.

Power Outlets

The vehicle has 12-volt accessory power outlets, which can be used to plug in electrical equipment, such as a cell phone or MP3 player.

The power outlets are located:

On the center stack below the climate controls.

Inside the center console.

At the rear of the center console.

Page 27

Black plate (20,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

1-20 In Brief

In the rear cargo area.

To use the outlets, remove the cover.

See Power Outlets on page 5-7.

Universal Remote System

The Universal Home Remote System allows for garage door openers, security systems, and home automation devices to be programmed to work with these buttons in the vehicle.

See Universal Remote System on page 5-45.

Sunroof

The ignition must be in ON/RUN or ACC/ACCESSORY, or Retained Accessory Power (RAP) must be

active to operate the sunroof and power sunshade. See Retained

Accessory Power (RAP) on page 9-19.

The vehicle may have a sunroof over the front seats and a rear sunroof over the second row seats. The rear sunroof does not open.

Vent: Press the front or rear of the switch to vent or close the sunroof.

Express-open/Express-close:

Press and release the rear or front of the switch to express-open or express-close the sunroof.

Manual Sunshade

The sunshades must be opened and closed manually. To open the sunshade, press the button on the sunshade handle to release it and guide it back. To close the sunshade, pull the sunshade forward until it latches.

See Sunroof on page 2-19.

Page 28

Black plate (21,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

In Brief 1-21

Performance and Maintenance

Traction Control/ Electronic Stability Control

The vehicle has a traction control system that limits wheel spin, and the StabiliTrak system that assists with directional control of the vehicle in difficult driving conditions. Both systems turn on automatically every time the vehicle is started.

To turn off traction control and StabiliTrak, press and release

on the center stack, and the appropriate DIC message displays. See Ride Control System Messages on page 5-35.

Press and release 4 again to turn on both systems.

See Traction Control/Electronic Stability Control on page 9-28.

Tire Pressure Monitor

This vehicle may have a Tire Pressure Monitor System (TPMS).

The low tire pressure warning light alerts to a significant loss in pressure of one of the vehicle's tires. If the warning light comes on, stop as soon as possible and inflate the tires to the recommended pressure shown on the Tire and Loading Information label. See Vehicle Load Limits on page 9-9. The warning light will remain on until the tire pressure is corrected.

The low tire pressure warning light may come on in cool weather when the vehicle is first started, and then turn off as the vehicle is driven. This may be an early indicator that the

tire pressures are getting low and the tires need to be inflated to the proper pressure.

The TPMS does not replace normal monthly tire maintenance. Maintain the correct tire pressures.

See Tire Pressure Monitor System on page 10-44.

Engine Oil Life System

The engine oil life system calculates engine oil life based on vehicle use and displays the CHANGE ENGINE OIL SOON message when it is time to change the engine oil and filter. The oil life system should be reset to 100% only following an oil change.

Resetting the Oil Life System

1. Turn the ignition to ON/RUN, with the engine off.

2. Press the vehicle information button until OIL LIFE REMAINING displays.

Page 29

Black plate (22,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

1-22 In Brief

3. Press and hold the set/reset button until “100%” is displayed. Three chimes sound and the CHANGE ENGINE OIL SOON message goes off.

4. Turn the key to LOCK/OFF.

See Engine Oil Life System on page 10-9.

Driving for Better Fuel Economy

Driving habits can affect fuel mileage. Here are some driving tips to get the best fuel economy possible.

Avoid fast starts and accelerate smoothly.

Brake gradually and avoid abrupt stops.

Avoid idling the engine for long periods of time.

When road and weather conditions are appropriate, use cruise control.

Always follow posted speed limits or drive more slowly when conditions require.

Keep vehicle tires properly inflated.

Combine several trips into a single trip.

Replace the vehicle's tires with the same TPC Spec number molded into the tire's sidewall near the size.

Follow recommended scheduled maintenance.

Roadside Assistance Program

U.S.: 1-800-252-1112

TTY Users (U.S. Only): 1-888-889-2438

Canada: 1-800-268-6800

New Buick owners are automatically enrolled in the Roadside Assistance Program.

See Roadside Assistance Program on page 13-5.

OnStar

This vehicle may be equipped with a comprehensive, in-vehicle system that can connect to a live OnStar Advisor for Emergency, Security, Navigation, Connection, and Diagnostic Services. OnStar services may require a paid subscription. See OnStar Overview on page 14-1.

Page 30

Black plate (1,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Keys, Doors, and Windows 2-1

Keys, Doors, and Windows

Keys and Locks

Keys . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Remote Keyless Entry (RKE)

System . . . . . . . . . . . . . . . . . . . . . . 2-2

Remote Keyless Entry (RKE)

System Operation . . . . . . . . . . . 2-2

Remote Vehicle Start . . . . . . . . . 2-4

Door Locks . . . . . . . . . . . . . . . . . . . 2-6

Power Door Locks . . . . . . . . . . . . 2-6

Delayed Locking . . . . . . . . . . . . . . 2-7

Automatic Door Locks . . . . . . . . . 2-7

Lockout Protection . . . . . . . . . . . . 2-7

Safety Locks . . . . . . . . . . . . . . . . . . 2-7

Exterior Mirrors

Convex Mirrors . . . . . . . . . . . . . . 2-14

Power Mirrors . . . . . . . . . . . . . . . . 2-14

Folding Mirrors . . . . . . . . . . . . . . . 2-15

Heated Mirrors . . . . . . . . . . . . . . . 2-15

Automatic Dimming Mirror . . . 2-15

Park Tilt Mirrors . . . . . . . . . . . . . . 2-15

Interior Mirrors

Interior Rearview Mirrors . . . . . 2-16

Automatic Dimming Rearview

Mirror . . . . . . . . . . . . . . . . . . . . . . . 2-16

Windows

Windows . . . . . . . . . . . . . . . . . . . . . 2-16

Power Windows . . . . . . . . . . . . . 2-17

Sun Visors . . . . . . . . . . . . . . . . . . . 2-18

Roof

Sunroof . . . . . . . . . . . . . . . . . . . . . . 2-19

Doors

Liftgate . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Vehicle Security

Vehicle Security . . . . . . . . . . . . . . 2-11

Vehicle Alarm System . . . . . . . . 2-11

Immobilizer . . . . . . . . . . . . . . . . . . 2-13

Immobilizer Operation . . . . . . . 2-13

Keys and Locks

Keys

Warning

{

Leaving children in a vehicle with the ignition key is dangerous and children or others could be seriously injured or killed. They could operate the power windows or other controls or make the vehicle move. The windows will function with the keys in the ignition, and children or others could be caught in the path of a closing window. Do not leave children in a vehicle with the ignition key.

Page 31

Black plate (2,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

2-2 Keys, Doors, and Windows

If equipped, with an active OnStar subscription, an OnStar Advisor may remotely unlock the vehicle. See “OnStar,” if equipped.

Remote Keyless Entry (RKE) System

See Radio Frequency Statement on page 13-12.

If there is a decrease in the RKE operating range:

The key is used for the ignition and all door locks.

The key has a bar-coded key tag that the dealer or qualified locksmith can use to make new keys. Store this information in a safe place, not in the vehicle.

If it becomes difficult to turn the key, inspect the key blade for debris.

See your dealer if a replacement key or additional key is needed.

If locked out of the vehicle, call Roadside Assistance. See Roadside Assistance Program on page 13-5.

Check the distance. The transmitter may be too far from the vehicle.

Check the location. Other vehicles or objects may be blocking the signal.

Check the transmitter's battery. See “Battery Replacement” later in this section.

If the transmitter is still not working correctly, see your dealer or a qualified technician for service.

Remote Keyless Entry (RKE) System Operation

The RKE transmitter functions work up to 60 m (195 ft) away from the vehicle.

Other conditions can affect the performance of the transmitter. See

Remote Keyless Entry (RKE) System on page 2-2.

With Remote Start and Power

Liftgate Shown, Without Similar

/ (Remote Vehicle Start):

If equipped, see Remote Vehicle Start on page 2-4.

Page 32

Black plate (3,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Keys, Doors, and Windows 2-3

Q (Lock): Press to lock all the

doors.

If enabled through the Driver Information Center (DIC), the parking lamps flash once to indicate locking has occurred. If enabled through the DIC, the horn sounds

when

Q is pressed again within

five seconds. See Vehicle Personalization on page 5-38.

Pressing theft-deterrent system. See Vehicle Alarm System on page 2-11.

Q may arm the content

K (Unlock): Press once to unlock

only the driver door. If again within five seconds, all remaining doors unlock. The interior lamps come on and stay on for 20 seconds or until the ignition is turned on.

If enabled through the DIC, the parking lamps flash twice to indicate unlocking has occurred. See Vehicle Personalization on page 5-38.

K is pressed

Pressing disarms the content theft-deterrent system. See Vehicle Alarm System on page 2-11.

K on the RKE transmitter

8 (Power Liftgate): Press and

hold until the liftgate begins to move to open or close the liftgate. The taillamps flash and a chime sounds to indicate when the liftgate is opening or closing.

L (Vehicle Locator/Panic

Alarm): Press and release to locate the vehicle. The parking lamps flash and the horn sounds three times.

Press and hold two seconds to activate the panic alarm. The parking lamps flash and the horn sounds repeatedly for 30 seconds. The alarm turns off when the ignition is moved to ON/

RUN or ignition must be in LOCK/OFF for the panic alarm to work.

L is pressed again. The

L for more than

Programming Transmitters to the Vehicle

Only RKE transmitters programmed to this vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer. When the replacement transmitter is programmed to this vehicle, all remaining transmitters must also be reprogrammed. Any lost or stolen transmitters will no longer work once the new transmitter is programmed. Each vehicle can have up to eight transmitters programmed to it. See your dealer to program transmitters to this vehicle.

Battery Replacement

Replace the battery if the REPLACE BATTERY IN REMOTE KEY message displays in the DIC.

Page 33

Black plate (4,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

2-4 Keys, Doors, and Windows

Caution

{

When replacing the battery, do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter.

2. Remove the old battery. Do not

3. Insert the new battery, positive

4. Snap the transmitter back

transmitter. Do not insert the tool too far. Stop as soon as resistance is felt.

Twist the tool until the transmitter is separated.

use a metal object.

side facing down. Replace with a CR2032 or equivalent battery.

together.

Remote Vehicle Start

This vehicle has a remote starting feature that starts the engine from outside of the vehicle.

/ (Remote Start): This button is

on the RKE transmitter if the vehicle

1. Separate the transmitter with a flat, thin object, such as a flat head screwdriver.

Carefully insert the tool into the notch located along the parting line of the

has remote start.

Laws in some communities may restrict the use of remote starters. For example, some laws may require a person using the remote start to have the vehicle in view

when doing so. Check local regulations for any requirements on remote starting of vehicles.

Do not use the remote start feature if the vehicle is low on fuel. The vehicle could run out of fuel.

If the vehicle has the remote start feature, the RKE transmitter range may be less while the vehicle is running.

Other conditions can affect the performance of the transmitter. See

Remote Keyless Entry (RKE) System on page 2-2.

Starting the Engine Using Remote Start

To start the vehicle:

1. Aim the RKE transmitter at the vehicle.

2. Press and release RKE transmitter.

3. Immediately after completing Step 2, press and hold

the parking lamps flash. If the

Q on the

/ until

Page 34

Black plate (5,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Keys, Doors, and Windows 2-5

vehicle's lights cannot be seen, press and hold

four seconds.

When the vehicle starts, the parking lamps will turn on and remain on as long as the engine is running. The doors will be locked and the climate control system will operate automatically if the vehicle has the automatic system, or at the same setting as when the vehicle was last turned off.

If the vehicle has an automatic climate control system and heated seats, the heated seats turn on during colder outside temperatures and shut off when the key is turned to ON/RUN. See Heated and Cooled Front Seats on page 3-7.

The rear window defogger and heated mirrors, if the vehicle has them, turn on during colder outside temperatures and turn off when the key is turned to ON/RUN.

/ for at least

After entering the vehicle during a remote start, insert and turn the key to the ON/RUN position to drive the vehicle.

If the vehicle is left running it automatically shuts off after 10 minutes unless a time extension has been done.

Extending Engine Run Time

To extend the engine run time by 10 minutes, repeat Steps 1–3 while the engine is still running. An extension can be requested 30 seconds after starting. The engine run time can only be extended if it is the first remote start since the vehicle has been driven. Remote start can be extended one time.

If the remote start procedure is used again before the first 10-minute time frame has ended, the first 10 minutes will immediately expire and the second 10-minute time frame will start.

For example, if pressed again after the vehicle has been running for five minutes, 10 minutes are added, allowing the engine to run for a total of 15 minutes.

A maximum of two remote starts or remote start attempts are allowed between ignition cycles.

After the vehicle's engine has been started two times using the remote start button, the ignition must be turned on and then back off before the remote start procedure can be used again.

Q and then / are

Canceling a Remote Start

To manually shut off a remote start:

Aim the RKE transmitter at the vehicle and press

parking lamps turn off.

Turn on the hazard warning flashers.

Turn the ignition switch on and then off.

/ until the

Page 35

Black plate (6,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

2-6 Keys, Doors, and Windows

Conditions in Which the Remote Start Will Not Work

The vehicle cannot be started using the remote start feature if the key is in the ignition, the hood is open, or if there is an emission control system malfunction.

The engine turns off during a remote start if the coolant temperature gets too high or if the oil pressure gets low.

Door Locks

Warning

{

Unlocked doors can be dangerous.

Passengers, especially children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. The chance of being thrown out of the vehicle in a

(Continued)

Warning (Continued)

crash is increased if the doors are not locked. So, all passengers should wear safety belts properly and the doors should be locked whenever the vehicle is driven.

Young children who get into unlocked vehicles may be unable to get out. A child can be overcome by extreme heat and can suffer permanent injuries or even death from heat stroke. Always lock the vehicle whenever leaving it.

Outsiders can easily enter through an unlocked door when you slow down or stop the vehicle. Locking the doors can help prevent this from happening.

To lock or unlock a door manually:

From the inside use the door lock knob on the window sill.

From the outside turn the key toward the front or rear of the vehicle, or press the or button on the Remote Keyless Entry (RKE) transmitter.

Power Door Locks

K (Unlock): Press to unlock the

doors.

Q (Lock): Press to lock the doors.

Page 36

Black plate (7,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Keys, Doors, and Windows 2-7

Delayed Locking

This feature delays the locking of the doors until five seconds after all doors are closed.

When

Q is pressed on the power

door lock switch while the door or liftgate is open, a chime will sound three times indicating delayed locking is active.

The doors will lock automatically five seconds after all doors are closed. If a door is reopened before that time, the five-second timer will reset when all doors are closed again.

Press

Q on the door lock switch

again or press transmitter to lock doors immediately.

This feature can also be programmed. See Vehicle Personalization on page 5-38.

Q on the RKE

Automatic Door Locks

The doors will lock automatically when all doors are closed, the ignition is on, and the shift lever is moved out of P (Park).

To unlock the doors:

Press K on a door.

Shift the transmission into P (Park).

Automatic door unlocking can be programmed through the Driver Information Center (DIC). See

Vehicle Personalization on page 5-38.

Lockout Protection

When locking is requested with the driver door open and the key in the ignition, all the doors will lock and then the driver door will unlock. This can be manually overridden by

pressing and holding power door lock switch.

Q on the

If Unlocked Door Anti-Lockout is turned on, the vehicle is off with the driver door open, and door locking is requested, all the doors will lock and only the driver door will unlock. The Unlocked Door Anti-Lockout feature can be turned on or off using the vehicle personalization menus. See Vehicle Personalization on page 5-38.

Safety Locks

Caution

{

Pulling the inside door handle while the rear door safety locks are engaged could damage your vehicle. Do not pull the inside door handle while the rear door safety locks are engaged.

The vehicle has rear door security locks to prevent passengers from opening the rear doors from the inside.

Page 37

Black plate (8,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

2-8 Keys, Doors, and Windows

Doors

Liftgate

Warning

{

Exhaust gases can enter the vehicle if it is driven with the liftgate or trunk/hatch open, or with any objects that pass through the seal between the

Open the rear doors to access the security locks on the inside edge of each door.

To set the locks, insert a key into the slot and turn it to the horizontal position. The door can only be opened from the outside with the door unlocked. To return the door to normal operation, turn the slot to the vertical position.

body and the trunk/hatch or liftgate. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death.

If the vehicle must be driven with the liftgate or trunk/hatch open:

Close all of the windows.

Fully open the air outlets on or under the instrument panel.

(Continued)

Warning (Continued)

Adjust the climate control system to a setting that brings in only outside air and set the fan speed to the highest setting. See “Climate Control Systems” in the Index.

If the vehicle is equipped with a power liftgate, disable the power liftgate function.

See Engine Exhaust on page 9-21.

Caution

{

To avoid damage to the liftgate or liftgate glass, make sure the area above and behind the liftgate is clear before opening it.

Page 38

Black plate (9,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Keys, Doors, and Windows 2-9

Manual Liftgate

To unlock the liftgate, press the power door lock switch or press

on the Remote Keyless Entry (RKE) transmitter twice. See

Remote Keyless Entry (RKE) System Operation on page 2-2.

To open the liftgate, press the touch pad under the liftgate handle and lift up. The vehicle must be in P (Park) and the battery must be charged. Use the pull cup or pull strap to lower and close the liftgate.

Always close the liftgate before driving.

You, or others, could be injured if caught in the path of the power liftgate. Make sure there is no one in the way of the liftgate as it is opening and closing.

The power liftgate can be power opened and closed in the following ways:

Press and hold 8 on the RKE transmitter. See Remote

Keyless Entry (RKE) System Operation on page 2-2.

{

Power Liftgate

If equipped with a power liftgate, the vehicle must be in P (Park) to operate. The taillamps flash and a chime sounds when the power liftgate moves.

Warning

Press O.

Press the touch pad on the outside liftgate handle.

Pressing the buttons or touch pad a second time while the liftgate is moving reverses the direction.

Page 39

Black plate (10,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

2-10 Keys, Doors, and Windows

Power Liftgate Touch Pad

The liftgate can also be closed by pressing latch. Press

during the liftgate operation to reverse the operation.

The power liftgate may be temporarily disabled under extreme temperatures or under low battery conditions. If this occurs, the liftgate can be operated manually.

If the vehicle is shifted out of P (Park) while the liftgate power function is in progress, it will

l next to the liftgate

l a second time

continue to completion. If the vehicle is shifted out of P (Park) and accelerated before the power liftgate latch closes, the liftgate may reverse to the open position. Cargo could fall out of the vehicle. Always make sure the power liftgate is closed and latched before driving away.

If the power liftgate is used and the liftgate support struts have lost pressure, the taillamps will flash and a chime will sound. The liftgate will stay open temporarily, and then slowly close. See your dealer for service before using the liftgate if this occurs.

Obstacle Detection Features

If an obstacle is encountered during the power open or close cycle, a warning chime will sound and the liftgate will automatically reverse direction to the full closed or open position. After removing the obstacle the liftgate will resume normal operation.

If more obstacles are encountered on the same power cycle, the power function deactivates. The liftgate must be opened or closed manually if this occurs. A message displays on the Driver Information Center (DIC) to indicate that the liftgate is open. See Door Ajar Messages on page 5-30. After removing the obstacles, manually open the liftgate fully or close and latch the liftgate. The liftgate will resume normal power operation.

The vehicle also has pinch sensors along the side edges of the liftgate. If the sensors press against an object while closing, the liftgate will reverse direction and open fully. The liftgate will remain open until it is activated again or closed manually.

Do not force the liftgate open or closed during a power cycle.

Page 40

Black plate (11,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Keys, Doors, and Windows 2-11

Manual Operation of Power Liftgate

To change the liftgate to manual operation, press OFF on the power liftgate switch. A message displays on the DIC indicating manual operation mode. See Door Ajar Messages on page 5-30.

With the liftgate in manual mode and all of the doors unlocked, the liftgate can be manually opened and closed.

Press the touch pad on the outside of the liftgate pull cup and lift to open. Use the pull cup to lower and close the liftgate. The liftgate latch will power close.

Always close the liftgate before driving.

8 on the RKE transmitter or

l on the liftgate is pressed while

in manual operation mode, the taillamps will flash three times, but the liftgate will not move.

It is not recommended to drive with the liftgate open. However, if the vehicle must be driven with the liftgate open, the liftgate should be set to manual operation.

Vehicle Security

This vehicle has theft-deterrent features; however, they do not make the vehicle impossible to steal.

Vehicle Alarm System

On vehicles with an anti-theft alarm system, to activate the system:

Press Q on the Remote Keyless Entry (RKE) transmitter or the power door lock switch when any door is open.

Page 41

Black plate (12,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

2-12 Keys, Doors, and Windows

The security light flashes.

When the door is closed, the security light stops flashing and stays on solid for approximately 30 seconds. The content theft-deterrent alarm is not armed until the security light goes off.

If the delayed locking feature is active, the alarm is not activated until all doors are closed and the security light goes off.

Press Q when the driver door is closed. The security light comes on solid for approximately 30 seconds and then goes off. The content theft-deterrent alarm is not armed until the security light goes off.

The theft-deterrent system will not activate if the doors are locked with the vehicle's key or the manual door lock.

If a locked door is opened without using the RKE transmitter, a 10-second pre-alarm occurs. The

horn chirps and the lights flash. If the key is not placed in the ignition and turned to START or the

door is not unlocked by pressing during the 10-second pre-alarm, the alarm goes off. The headlamps flash and the horn sounds for about 30 seconds, then turns off to save the battery power.

The vehicle can be started with the correct ignition key if the alarm has been set off.

To avoid setting off the alarm by accident:

Lock the vehicle with the door key after the doors are closed.

Unlock the door with the RKE transmitter. Unlocking a door any other way sets off the alarm if the system has been armed.

K or place the key in the

Press ignition and turn it to START to turn off the alarm.

Testing the Alarm

To test the alarm:

1. From inside the vehicle, lower

the driver side window, and open the driver door.

2. Press

3. Get out of the vehicle, close the

4. Reach in through the window,

If the alarm does not sound when it should, but the headlamps flash, check to see if the horn works. The horn fuse may be blown. To replace the fuse, see Fuses and Circuit Breakers on page 10-28.

If the alarm does not sound or the headlamps do not flash, see your dealer for service.

door, and wait for the security light to go out.

unlock the door with the manual door lock, and open the door. This should set off the alarm.

Page 42

Black plate (13,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Keys, Doors, and Windows 2-13

Immobilizer

See Radio Frequency Statement on page 13-12.

Immobilizer Operation

This vehicle has PASS-Key®III+ (Personalized Automotive Security System) theft-deterrent system. PASS-Key III+ is a passive theft-deterrent system.

The system is automatically armed when the key is removed from the ignition.

The system is automatically disarmed when the key is turned to ON/RUN, ACC/ACCESSORY, or START from the LOCK/OFF position.

You do not have to manually arm or disarm the system.

The security light comes on if there is a problem with arming or disarming the theft-deterrent system.

When the PASS-Key III+ system senses an incorrect key, the vehicle does not start. Anyone using a trial-and-error method to start the vehicle will be discouraged because of the high number of electrical key codes.

If the engine does not start and the security light on the instrument panel comes on when trying to start the vehicle, there may be a problem with the theft-deterrent system. Turn the ignition off and try again.

If the engine still does not start, and the key appears to be undamaged, try another ignition key and check the fuses. See Fuses and Circuit Breakers on page 10-28 for additional information. If the engine still does not start with the other key, the vehicle needs service. If the vehicle does start, the first key may be faulty. See your dealer who can service the PASS-Key III+ to have a new key made. In an emergency, contact Roadside Assistance. See

Roadside Assistance Program on page 13-5.

It is possible for the PASS-Key III+ decoder to learn the transponder value of a new or replacement key. Up to 10 keys may be programmed to the vehicle. The following procedure is for programming additional keys only. If all currently programmed keys are lost or do not operate, you must see your dealer or a locksmith who can service PASS-Key III+ to have keys made and programmed to the system.

See your dealer or a locksmith who can service PASS-Key III+ to get a new key blank that is cut exactly as the ignition key that operates the system.

To program the new additional key:

1. Verify that the new key has a stamped on it.

2. Insert the already programmed key in the ignition and start the engine. If the engine does not start, see your dealer for service.

Page 43

Black plate (14,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

2-14 Keys, Doors, and Windows

3. After the engine has started, turn the key to LOCK/OFF, and remove the key.

4. Insert the key to be programmed and turn it to the ON/RUN position within five seconds of the original key being turned to the LOCK/OFF position.

The security light turns off once the key has been programmed.

5. Repeat Steps 1–4 if additional keys are to be programmed.

If the PASS-Key III+ key is lost or damaged, see your dealer or a locksmith to have a new key made.

The SERVICE THEFT DETERRENT SYSTEM message displays on the Driver Information Center (DIC) when there is a problem with the theft-deterrent system. See Security Messages on page 5-35 for additional information.

Do not leave the key or device that disarms or deactivates the theft-deterrent system in the vehicle.

Exterior Mirrors

Convex Mirrors

Warning

{

A convex mirror can make things, like other vehicles, look farther away than they really are. If you cut too sharply into the right lane, you could hit a vehicle on the right. Check the inside mirror or glance over your shoulder before changing lanes.

The passenger side mirror is convex shaped. A convex mirror's surface is curved so more can be seen from the driver seat.

Power Mirrors

To adjust each mirror:

1. Press (1) or (2) to select the mirror.

2. Press on the control pad to adjust the mirror.

3. Press (1) or (2) again to deselect the mirror.

Page 44

Black plate (15,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Keys, Doors, and Windows 2-15

Side Blind Zone Alert (SBZA)

If the vehicle has the Side Blind Zone Alert (SBZA) system, see Side

Blind Zone Alert (SBZA) on page 9-36.

Folding Mirrors

For vehicles with manual folding mirrors, push the mirror toward the vehicle. Pull the mirror out to return to its original position.

For vehicles with outside power folding mirrors:

1. Press (1) to fold the mirrors out to the driving position.

2. Press (2) to fold the mirrors in to the folded position.

Resetting the Power Folding Mirrors

Reset the power folding mirrors if:

The mirrors are accidentally obstructed while folding.

They are accidentally manually folded/unfolded.

The mirrors vibrate at normal driving speeds.

Fold and unfold the mirrors one time using the mirror controls to reset them to their normal position. A popping noise may be heard during the resetting of the power folding mirrors. This sound is normal after a manual folding operation.

Heated Mirrors

For vehicles with heated mirrors:

1 (Rear Window Defogger):

Press to heat the mirrors.

See “Rear Window Defogger” under

Dual Automatic Climate Control System on page 8-1.

Automatic Dimming Mirror

The driver outside mirror automatically adjusts for the glare of headlamps from behind.

Park Tilt Mirrors

If equipped with memory seats, the passenger and/or driver mirror tilts to a preselected position when the vehicle is in R (Reverse). This allows the curb to be seen when parallel parking.

Page 45

Black plate (16,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

2-16 Keys, Doors, and Windows

The mirror(s) return to the original position when:

The vehicle is shifted out of R (Reverse), or remains in R (Reverse) for about 30 seconds.

The ignition is turned off.

The vehicle is driven in R (Reverse) above a set speed.

To turn this feature on or off, see

Vehicle Personalization on page 5-38.

Interior Mirrors

Interior Rearview Mirrors

Adjust the rearview mirror for a clear view of the area behind your vehicle.

If equipped with OnStar, the vehicle may have three control buttons at the bottom of the mirror. See your dealer for more information about OnStar and how to subscribe to it. See “Onstar,” if equipped.

Do not spray glass cleaner directly on the mirror. Use a soft towel dampened with water.

Automatic Dimming Rearview Mirror

If equipped, automatic dimming reduces the glare of the headlamps from behind. This feature comes on when the vehicle is started.

Windows

Warning

{

Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke.

Page 46

Black plate (17,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Keys, Doors, and Windows 2-17

The vehicle aerodynamics are designed to improve fuel economy performance. This may result in a pulsing sound when either rear window is down and the front windows are up. To reduce the sound, open either a front window or the sunroof, if equipped.

Power Windows

Warning

{

Children could be seriously injured or killed if caught in the path of a closing window. Never leave keys in a vehicle with children. When there are children in the rear seat, use the window lockout button to prevent operation of the windows. See Keys on page 2-1.

Uplevel Shown, Base Similar

The driver door has switches that control the passenger and rear windows. The power windows work with the ignition in ACC/ ACCESSORY or ON/RUN or with Retained Accessory Power (RAP) active. See Retained Accessory Power (RAP) on page 9-19.

Press the switch to lower the window. Pull up on the front edge of the switch to raise the window.

Express-Up/Express-Down Windows

A window with the express-up/down feature allows it to be raised or lowered without holding the switch. Press or pull the window switch fully and release it to activate the express feature. The express mode can be canceled by pressing or pulling the switch.

Programming the Power Windows

If the vehicle battery has been recharged, disconnected, or replaced, windows with the express-up feature need to be reprogrammed for this feature to work. To program the window:

1. Close all doors with the ignition in the ACC/ACCESSORY or ON/ RUN position, or with Retained Accessory Power (RAP) active. See Retained Accessory Power (RAP) on page 9-19.

Page 47

Black plate (18,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

2-18 Keys, Doors, and Windows

2. Press and continue to hold the window switch until the window is fully open.

3. Pull up and hold the window switch to close the window. Continue to hold it briefly after the window is fully closed.

4. Repeat for each window that has the express-up feature.

Anti-Pinch Feature

The anti-pinch feature is on windows with the express-up feature. If an object is in the way of the window as it is express-closing, or in certain weather conditions like severe icing, the window will stop and open to a factory preset position. The window functions normally once the obstruction is removed.

Rear Window Lockout

The rear window lockout feature prevents the rear passenger windows from operating, except from the driver position.

v to activate the rear

Press window lockout switch. The indicator light comes on when activated.

Press

v again to deactivate the

lockout switch.

Sun Visors

Pull the sun visor down to block glare. Detach the sun visor from the center mount to pivot to the side window or, if equipped, extend along the rod.

Page 48

Black plate (19,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Keys, Doors, and Windows 2-19

Roof

Sunroof

The ignition must be in ON/RUN or ACC/ACCESSORY, or Retained Accessory Power (RAP) must be active to operate the sunroof and power sunshade. See Retained

Accessory Power (RAP) on page 9-19.

If equipped, there may be a rear sunroof over the second row seats. The rear sunroof does not open.

Vent: Press and hold the front of the switch to vent the sunroof. Press and hold the rear of the switch to close the sunroof.

Express-open/Express-close:

Press and release the rear of the switch to express-open the sunroof. Press and release the front of the switch to express-close the sunroof.

Manual Sunshade

Dirt and debris may collect on the sunroof seal or in the track. This could cause an issue with sunroof operation or noise. It could also plug the water drainage system. Periodically open the sunroof and remove any obstacles or loose debris. Wipe the sunroof seal and roof sealing area using a clean cloth, mild soap, and water. Do not remove grease from the sunroof.

If water is seen dripping into the water drainage system, this is normal.

Page 49

Black plate (20,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

2-20 Keys, Doors, and Windows

2 NOTES

Page 50

Black plate (1,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-1

Seats and Restraints

Head Restraints

Head Restraints . . . . . . . . . . . . . . . 3-2

Front Seats

Power Seat Adjustment . . . . . . . 3-3

Lumbar Adjustment . . . . . . . . . . . 3-4

Reclining Seatbacks . . . . . . . . . . 3-4

Memory Seats . . . . . . . . . . . . . . . . 3-5

Heated and Cooled Front

Seats . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Rear Seats

Rear Seats . . . . . . . . . . . . . . . . . . . . 3-8

Third Row Seats . . . . . . . . . . . . . 3-10

Safety Belts

Safety Belts . . . . . . . . . . . . . . . . . . 3-13

How to Wear Safety Belts

Properly . . . . . . . . . . . . . . . . . . . . 3-14

Lap-Shoulder Belt . . . . . . . . . . . 3-15

Safety Belt Use During

Pregnancy . . . . . . . . . . . . . . . . . . 3-19

Safety Belt Extender . . . . . . . . . 3-20

Safety System Check . . . . . . . . 3-20

Safety Belt Care . . . . . . . . . . . . . 3-20

Replacing Safety Belt System

Parts after a Crash . . . . . . . . . 3-20

Airbag System

Airbag System . . . . . . . . . . . . . . . 3-21

Where Are the Airbags? . . . . . 3-23

When Should an Airbag

Inflate? . . . . . . . . . . . . . . . . . . . . . 3-25

What Makes an Airbag

Inflate? . . . . . . . . . . . . . . . . . . . . . 3-26

How Does an Airbag

Restrain? . . . . . . . . . . . . . . . . . . . 3-26

What Will You See after an

Airbag Inflates? . . . . . . . . . . . . 3-27

Passenger Sensing

System . . . . . . . . . . . . . . . . . . . . . 3-28

Servicing the Airbag-Equipped

Vehicle . . . . . . . . . . . . . . . . . . . . . 3-33

Adding Equipment to the

Airbag-Equipped Vehicle . . . 3-33

Airbag System Check . . . . . . . . 3-34

Replacing Airbag System

Parts after a Crash . . . . . . . . . 3-34

Child Restraints

Older Children . . . . . . . . . . . . . . . 3-35

Infants and Young

Children . . . . . . . . . . . . . . . . . . . . 3-37

Child Restraint Systems . . . . . 3-40

Where to Put the Restraint . . . 3-41 Lower Anchors and Tethers

for Children (LATCH

System) . . . . . . . . . . . . . . . . . . . . 3-43

Replacing LATCH System

Parts After a Crash . . . . . . . . . 3-49

Securing Child Restraints

(Rear Seat) . . . . . . . . . . . . . . . . . 3-50

Securing Child Restraints

(Front Passenger Seat) . . . . 3-52

Page 51

Black plate (2,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-2 Seats and Restraints

Head Restraints

Front Seats

Warning

{

With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/ spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly.

The vehicle's front seats have adjustable head restraints in the outboard seating positions.

Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant's head. This position reduces the chance of a neck injury in a crash.

To raise or lower the head restraint, press the button located on the side of the head restraint, and pull up or push the head restraint down, and release the button. Pull and push on the head restraint after the button is released to make sure that it is locked in place.

To adjust the head restraint forward, grasp the head restraint and pull forward until the desired locking position is reached.

To adjust the head restraint rearward, press the button located on the side of the head restraint,

Page 52

Black plate (3,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-3

and push the head restraint rearward until the desired locking position is reached. Try to move the head restraint after the button is released to make sure that it is locked in place.

The front seat outboard head restraints are not removable.

Rear Seats

The vehicle's second row seats have head restraints in the outboard seating positions that cannot be adjusted.

The vehicle's third row seats have headrests in the outboard seating positions that cannot be adjusted.

The second row head restraints and third row headrests are not removable.

Front Seats

Power Seat Adjustment

{

You can lose control of the vehicle if you try to adjust a driver seat while the vehicle is moving. Adjust the driver seat only when the vehicle is not moving.

1. Seat Adjustment Control

2. Reclining Seatback Control

Warning

3. Lumbar Adjustment Control

To adjust the seat:

Move the seat forward or rearward by sliding the control (1) forward or rearward.

Raise or lower the front part of the seat cushion by moving the front of the control (1) up or down.

Raise or lower the entire seat by moving the rear of the control (1) up or down.

Adjust the seatback by tilting the top of the control (2) forward or rearward.

See Reclining Seatbacks on page 3-4.

Increase or decrease lumbar support by pressing the front or rear of the control (3).

See Lumbar Adjustment on page 3-4.

Page 53

Black plate (4,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-4 Seats and Restraints

Lumbar Adjustment

Power Lumbar

Manual Lumbar

If equipped, press and hold the front

If equipped, move the handle forward or rearward to increase or decrease lumbar support.

or rear of control to increase or decrease lumbar support. Release the control when the seatback reaches the desired level of lumbar support.

Reclining Seatbacks

Power Reclining Seatbacks

To adjust the seatback:

Tilt the top of the control rearward to recline.

Tilt the top of the control forward to raise.

Page 54

Black plate (5,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-5

Warning

{

Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the safety belts cannot do their job.

The shoulder belt will not be against your body. Instead, it will be in front of you. In a crash, you could go into it, receiving neck or other injuries.

The lap belt could go up over your abdomen. The belt forces would be there, not at your pelvic bones. This could cause serious internal injuries.

For proper protection when the vehicle is in motion, have the seatback upright. Then sit well back in the seat and wear the safety belt properly.

Do not have a seatback reclined if the vehicle is moving.

Memory Seats

If available, the controls on the driver door are used to program and recall memory settings for the driver seat, outside mirrors, and power steering column (if equipped).

Page 55

Black plate (6,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-6 Seats and Restraints

Storing Memory Positions

To save into memory:

1. Adjust the driver seat and seatback recliner, both outside mirrors, and the power steering column (if equipped).

Not all vehicles will have the ability to save and recall the mirror positions.

2. Press and hold “1” until two beeps sound.

3. Repeat for a second driver position using “2.”

To recall, press and release “1” or “2.” The vehicle must be in P (Park). A single beep will sound. The seat, outside mirrors, and power steering column (if equipped) will move to the positions previously stored for the identified driver.

Memory Remote Recall

The memory feature can recall the driver seat, outside mirrors, and power steering column (if equipped) to stored positions when entering the vehicle.

To activate, unlock the driver door with the Remote Keyless Entry (RKE) transmitter. The driver seat, outside mirrors, and power steering column will move to the memory positions associated with the transmitter used to unlock the vehicle.

This feature is turned on or off using the vehicle personalization menu. See Vehicle Personalization on page 5-38.

To stop recall movement, press one of the power seat controls, memory buttons, power mirror buttons, or the power steering column control (if equipped).

If something has blocked the driver seat and/or steering column while recalling a memory position, the

recall may stop. Remove the obstruction; then press and hold the appropriate manual control for the memory item that is not recalling for two seconds. Try recalling the memory position again by pressing the appropriate memory button. If the memory position is still not recalling, see your dealer for service.

Easy Exit Positions

The easy exit feature can move the driver seat rearward and the power steering column (if equipped) up and forward to allow extra room to exit the vehicle.

S (Easy Exit Positions): Press to

activate the recall. The vehicle must be in P (Park).

If this feature is programmed on in the vehicle personalization menu, automatic driver seat and power steering column movement occur when the ignition key is removed.

Page 56

Black plate (7,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-7

A single beep sounds. The driver seat moves back approximately 8 cm (3 in) and the power steering column (if equipped) moves up and forward. To move the seat back

farther, press is all the way back.

If something has blocked the driver seat while recalling the exit position, the recall may stop. Remove the obstruction; then press and hold the power seat control rearward for two seconds. Try recalling the exit position again. If the exit position is still not recalling, see your dealer for service.

See Vehicle Personalization on page 5-38.

S again until the seat

Heated and Cooled Front Seats

Warning

{

If you cannot feel temperature change or pain to the skin, the seat heater may cause burns. To reduce the risk of burns, people with such a condition should use care when using the seat heater, especially for long periods of time. Do not place anything on the seat that insulates against heat, such as a blanket, cushion, cover, or similar item. This may cause the seat heater to overheat. An overheated seat heater may cause a burn or may damage the seat.

Heated and Cooled Seat Buttons

Shown, Heated Seat Buttons

Similar

If equipped, the buttons are on the center stack. To operate, the engine must be running.

I (Heated Seatback): If equipped,

press to heat the seatback only.

H (Cooled Seat): If equipped,

press to cool the entire seat.

J (Heated Seat and Seatback):

Press to heat the seat and seatback.

Press the button once for the highest setting. With each press of the button, the seat will change to the next lower setting, and then to

Page 57

Black plate (8,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-8 Seats and Restraints

the off setting. The lights indicate three for the highest setting and one for the lowest.

The passenger heated seat may take longer to heat up.

The heated and/or cooled seats are canceled after the ignition is turned off.

Remote Start Heated Seats

When it is cold outside, the heated seats may turn on automatically during a remote vehicle start. The heated seats will be canceled when the ignition is turned on. Press the desired heated seat button to use the heated seats after the vehicle is started.

The heated seat button lights will not turn on during a remote start.

The temperature of an unoccupied seat may be reduced.

See Remote Vehicle Start on page 2-4.

Rear Seats

1. Seat Adjustment Handle

2. Reclining Seatback Strap

3. Sliding Seat Lever

Entering and Exiting the Third Row

Warning

{

Using the third row seating position while the second row is folded, or folded and tumbled, could cause injury in a sudden stop or crash. Be sure to return the seat to the passenger seating position. Push and pull on the seat to make sure it is locked into place.

Caution

{

Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat.

Page 58

Black plate (9,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-9

To access the third row:

1. Remove objects on the floor in front of or on the second row seat, or in the seat tracks on the floor.

2. Move the front center console armrest completely forward. See

Center Console Storage on page 4-2.

3. Place the folding armrests in the upright position.

4. Make sure that the safety belt is unfastened and in the stowed position.

5. Pull the sliding seat lever (3) forward. The seatback will tilt forward, and the seat will begin sliding forward. Continue to push forward on the seatback until the entire seat moves all the way forward and the seat cushion is folded.

Returning the Seat to the Seating Position

To return the second row seat to its normal seating position:

1. Remove objects on the floor behind the second row seat or in the seat tracks on the floor.

2. Slide the seat rearward by pushing on the seatback until the seat is locked into place.

3. Continue pushing the seatback rearward until the seatback is locked into place.

4. Push down on the rear of the seat cushion until it is locked in place.

5. Push and pull on the seatback and seat cushion to make sure they are locked in place.

6. Check that the safety belt is not under the seat cushion.

Reclining the Seatbacks

To recline the seatback:

1. Leaning rearward in the seat, pull the reclining seatback strap (2).

2. Move the seatback to the desired position, and then release the strap (2) to lock the seatback in place.

3. Push and pull on the seatback to make sure it is locked.

Folding the Seatback

To fold the second row seatbacks:

1. Remove anything on or under the seat.

2. Place the armrest in the upright position, and unfasten the safety belt.

Page 59

Black plate (10,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-10 Seats and Restraints

3. Pull forward on the reclining seatback strap (2).

The head restraint will fold down automatically.

To return the seatback to the seating position, lift the seatback and push it rearward until it locks into place. Push and pull on the seatback to make sure it is locked. Pull up on the head restraint to return it to the upright, locked position.

Adjusting the Seats

To adjust the second row seats, pull outward on the seat adjustment handle (1). Slide the seat forward or rearward to the desired position. Release the handle (1), and push and pull on the seat to make sure it is locked.

Third Row Seats

Warning

{

Using the third row seating position while the second row is folded, or pushed forward in the entry position, could cause injury in a sudden stop or crash. Be sure to return the seat to the passenger seating position. Push and pull on the seat to make sure it is locked into place.

Folding the Seatback

Caution

{

To fold the third row seatback:

1. If the second row seat is in the full rear position, adjust it forward to allow the third row seat to fold fully flat.

2. Remove anything on or under the seat.

3. Disconnect the rear safety belt mini-latch, using a key in the slot on the mini-buckle, and let the belt retract into the headliner. Stow the mini-latch in the holder in the headliner.

Page 60

Black plate (11,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-11

or lift the seatback and push it into place from inside the vehicle.

{

If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are

4. Pull up on the release lever on the back of the seat.

5. Push the seatback forward to lay flat.

Returning the Seat to the Seating Position

To return the seatback to the seating position:

1. From the rear of the vehicle, raise the seatback to the upright position using the pull strap on the back of the third row seat,

locked.

2. Push and pull on the seatback to make sure it is locked in place.

{

A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be

Warning

Warning (Continued)

sure that the safety belts are properly routed and attached, and are not twisted.

3. Reconnect the center safety belt mini-latch to the mini-buckle. Do not let it twist.

4. Pull on the safety belt to be sure the mini-latch is secure.

Removing the Third Row Seats

To remove a third row seat:

1. Remove the cargo management system, if it is installed. See

Cargo Management System on page 4-3.

2. Remove anything on or under the seat.

(Continued)

Page 61

Black plate (12,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-12 Seats and Restraints

Caution

{

3. Fold the seatback down. See “Folding the Seatback” earlier in this section.

4. Remove the rear bolts on the floor on each side of the seat.

5. Remove the seat by tilting it slightly upward, and then pulling it out of the rear of the vehicle in one motion.

6. Replace the bolts in the floor holes for storage.

Installing the Third Row Seats

To reinstall a third row seat:

1. Before installing the seat, the seatback must be folded forward. See “Folding the Seatback” earlier in this section.

The seats must be placed in the proper locations to attach correctly. The wider seat must be installed on the driver side and the narrower seat on the passenger side. Remove the bolts from the holes in the floor before installing the seats.

2. Place the seat on the vehicle floor so that the front seat hooks are on the vehicle bars.

3. Reinstall the bolts, and torque to 55 Y (41 lb ft). Pull up on the seat to make sure it is locked in place.

4. Raise the seatback to its upright position. Push and pull on the seatback to make sure it is locked into place.

5. Reconnect the center safety belt mini-latch to the mini-buckle. Do not let it twist.

Page 62

Black plate (13,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-13

Safety Belts

This section of the manual describes how to use safety belts properly. It also describes some things not to do with safety belts.

Warning

{

Do not let anyone ride where a safety belt cannot be worn properly. In a crash, if you or your passenger(s) are not wearing safety belts, injuries can be much worse than if you are wearing safety belts. You can be seriously injured or killed by hitting things inside the vehicle harder or by being ejected from the vehicle. In addition, anyone who is not buckled up can strike other passengers in the vehicle.

It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, passengers riding in these areas

(Continued)

Warning (Continued)

are more likely to be seriously injured or killed. Do not allow passengers to ride in any area of the vehicle that is not equipped with seats and safety belts.

Always wear a safety belt, and check that all passenger(s) are restrained properly too.

This vehicle has indicators as a reminder to buckle the safety belts. See Safety Belt Reminders on page 5-13.

Why Safety Belts Work

When riding in a vehicle, you travel as fast as the vehicle does. If the vehicle stops suddenly, you keep going until something stops you. It could be the windshield, the instrument panel, or the safety belts!

When you wear a safety belt, you and the vehicle slow down together. There is more time to stop because you stop over a longer distance and, when worn properly, your strongest bones take the forces from the

Page 63

Black plate (14,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-14 Seats and Restraints

safety belts. That is why wearing safety belts makes such good sense.

Questions and Answers About Safety Belts

Q: Will I be trapped in the vehicle

after a crash if I am wearing a safety belt?

A: You could be — whether you are

wearing a safety belt or not. Your chance of being conscious during and after a crash, so you

can unbuckle and get out, is much greater if you are belted.

Q: If my vehicle has airbags, why

should I have to wear safety belts?

A: Airbags are supplemental

systems only; so they work with safety belts — not instead of them. Whether or not an airbag is provided, all occupants still have to buckle up to get the most protection.

Also, in nearly all states and in all Canadian provinces, the law requires wearing safety belts.

How to Wear Safety Belts Properly

This section is only for people of adult size.

There are special things to know about safety belts and children. And there are different rules for smaller children and infants. If a child will be riding in the vehicle, see Older

Children on page 3-35 or Infants and Young Children on page 3-37.

Follow those rules for everyone's protection.

It is very important for all occupants to buckle up. Statistics show that unbelted people are hurt more often in crashes than those who are wearing safety belts.

There are important things to know about wearing a safety belt properly.

Sit up straight and always keep your feet on the floor in front of you.

Always use the correct buckle for your seating position.

Wear the lap part of the belt low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones and you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force on your abdomen. This could cause serious or even fatal injuries.

Page 64

Black plate (15,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Wear the shoulder belt over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The shoulder belt locks if there is a sudden stop or crash.

Lap-Shoulder Belt

All seating positions in the vehicle have a lap-shoulder belt.

If you are using a rear seating position with a detachable safety belt and the safety belt is not

Warning

{

You can be seriously injured, or even killed, by not wearing your safety belt properly.

Never allow the lap or shoulder belt to become loose or twisted.

Never wear the shoulder belt under both arms or behind your back.

Never route the lap or

attached, see “Returning the Seat to the Seating Position” under Third Row Seats on page 3-10 for instruction on reconnecting the safety belt to the mini-buckle.

The following instructions explain how to wear a lap-shoulder belt properly.

1. Adjust the seat, if the seat is adjustable, so you can sit up straight. To see how, see “Seats” in the Index.

shoulder belt over an armrest.

Seats and Restraints 3-15

2. Pick up the latch plate and pull the belt across you. Do not let it get twisted.

The lap-shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly.

If the shoulder portion of a passenger belt is pulled out all the way, the child restraint locking feature may be engaged. If this happens, let the belt go back all the way and start again.

Page 65

Black plate (16,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-16 Seats and Restraints

later in this section for instructions on use and important safety information.

3. Push the latch plate into the buckle until it clicks.

4. Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see Safety Belt Extender on page 3-20.

Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary.

6. To make the lap part tight, pull up on the shoulder belt.

It may be necessary to pull the stitching on the safety belt through the latch plate to fully tighten the lap belt on smaller occupants.

5. If equipped with a shoulder belt height adjuster, move it to the height that is right for you. See “Shoulder Belt Height Adjuster”

To unlatch the belt, push the button on the buckle. The belt should return to its stowed position. Slide the latch plate up the safety belt webbing when the safety belt is not in use. The latch plate should rest on the stitching on the safety belt, near the guide loop on the side wall.

Before a door is closed, be sure the safety belt is out of the way. If a door is slammed against a safety belt, damage can occur to both the safety belt and the vehicle.

Page 66

Black plate (17,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-17

Shoulder Belt Height Adjuster

The vehicle has a shoulder belt height adjuster for the driver and right front passenger seating positions.

Adjust the height so the shoulder portion of the belt is on the shoulder but not falling off of it. The belt should be close to but not contacting the neck. Improper shoulder belt height adjustment could reduce the effectiveness of the safety belt in a crash. See How

to Wear Safety Belts Properly on page 3-14.

To move it down, push down on the release button and move the height adjuster to the desired position. You can move the height adjuster up by pushing up on the shoulder belt guide.

After the adjuster is set to the desired position, try to move it down without pushing the release button to make sure it has locked into position.

Safety Belt Pretensioners

This vehicle has safety belt pretensioners for the front outboard occupants. Although the safety belt pretensioners cannot be seen, they are part of the safety belt assembly. They can help tighten the safety belts during the early stages of a moderate to severe frontal, near frontal, or rear crash if the threshold conditions for pretensioner activation are met. Safety belt pretensioners can also help tighten the safety belts in a side crash or a rollover event.

Pretensioners work only once. If the pretensioners activate in a crash, they will need to be replaced, and probably other new parts for the vehicle's safety belt system. See

Replacing Safety Belt System Parts after a Crash on page 3-20.

Page 67

Black plate (18,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-18 Seats and Restraints

Rear Safety Belt Comfort Guides

Warning

{

A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.

Rear safety belt comfort guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed on a shoulder belt, the comfort guide positions the shoulder belt away from the neck and head.

Second Row Outboard Seating Positions

The vehicle has comfort guides for the second row outboard seating positions. The comfort guides are stored on a clip on the interior trim next to the outboard seatback.

To install:

2. Place the guide over the belt, and insert the two edges of the belt into the slots of the guide.

1. Remove the guide from its storage clip on the interior trim next to the outboard seatback.

Page 68

Black plate (19,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be behind the belt with the plastic guide on the front.

4. Buckle, position, and release the safety belt as described previously in this section. Make sure the shoulder portion of the belt is on the shoulder and not falling off of it. The belt should be close to, but not contacting, the neck.

To remove and store the comfort guide, squeeze the belt edges together so that the safety belt can be removed from the guide. Slide the guide onto its storage clip.

Seats and Restraints 3-19

Third Row Seating Positions

Comfort guides are available through your dealer for the third row seating positions. Instructions are included with the guide.

Safety Belt Use During Pregnancy

Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts.

Page 69

Black plate (20,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-20 Seats and Restraints

A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy.

The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it is more likely that the fetus will not be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.

Safety Belt Extender

If the vehicle's safety belt will fasten around you, you should use it.

But if a safety belt is not long enough, your dealer will order you an extender. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you. To help avoid personal injury, do not let someone else use it, and use it only for the seat it is made to fit. The extender has been designed for adults. Never

use it for securing child seats. To wear it, attach it to the regular safety belt. See the instruction sheet that comes with the extender.

Safety System Check

Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are all working properly. Look for any other loose or damaged safety belt system parts that might keep a safety belt system from doing its job. See your dealer to have it repaired. Torn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces. If a belt is torn or frayed, get a new one right away.

Make sure the safety belt reminder light is working. See Safety Belt Reminders on page 5-13.

Keep safety belts clean and dry. See Safety Belt Care on page 3-20.

Safety Belt Care

Keep belts clean and dry.

Warning

{

Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.

Replacing Safety Belt System Parts after a Crash

Warning

{

A crash can damage the safety belt system in the vehicle. A damaged safety belt system may not properly protect the person using it, resulting in serious injury or even death in a

(Continued)

Page 70

Black plate (21,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-21

Warning (Continued)

crash. To help make sure the safety belt systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.

After a minor crash, replacement of safety belts may not be necessary. But the safety belt assemblies that were used during any crash may have been stressed or damaged. See your dealer to have the safety belt assemblies inspected or replaced.

New parts and repairs may be necessary even if the safety belt system was not being used at the time of the crash.

Have the safety belt pretensioners checked if the vehicle has been in a crash, or if the airbag readiness light stays on after you start the vehicle or while you are driving. See Airbag Readiness Light on page 5-14.

Airbag System

The vehicle has the following airbags:

A frontal airbag for the driver.

A frontal airbag for the front outboard passenger.

A front center airbag for the driver and front outboard passenger.

A seat-mounted side impact airbag for the driver.

A seat-mounted side impact airbag for the front outboard passenger.

A roof-rail airbag for the driver and for the second and third row passengers seated directly behind the driver.

A roof-rail airbag for the front outboard passenger and the second and third row passengers seated directly behind the front outboard passenger.

Page 71

Black plate (22,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-22 Seats and Restraints

All vehicle airbags have the word AIRBAG on the trim or on an attached label near the deployment opening.

For frontal airbags, the word AIRBAG is on the center of the steering wheel for the driver and on the instrument panel for the front outboard passenger.

For the front center airbag, the word AIRBAG is on the inboard side of the driver seatback.

For seat-mounted side impact airbags, the word AIRBAG is on the side of the seatback closest to the door.

For roof-rail airbags, the word AIRBAG is on the ceiling or trim.

Airbags are designed to supplement the protection provided by safety belts. Even though today's airbags are also designed to help reduce the risk of injury from the force of an inflating bag, all airbags must inflate very quickly to do their job.

Here are the most important things to know about the airbag system:

Warning

{

You can be severely injured or killed in a crash if you are not wearing your safety belt, even with airbags. Airbags are designed to work with safety belts, not replace them. Also, airbags are not designed to inflate in every crash. In some crashes safety belts are the only restraint. See When Should an Airbag Inflate? on page 3-25.

Wearing your safety belt during a crash helps reduce the chance of hitting things inside the vehicle or being ejected from it. Airbags are “supplemental restraints” to the safety belts. Everyone in the vehicle should wear a safety belt properly, whether or not there is an airbag for that person.

Warning

{

Because airbags inflate with great force and faster than the blink of an eye, anyone who is up against, or very close to any airbag when it inflates can be seriously injured or killed. Do not sit unnecessarily close to any airbag, as you would be if sitting on the edge of the seat or leaning forward. Safety belts help keep you in position before and during a crash. Always wear a safety belt, even with airbags. The driver should sit as far back as possible while still maintaining control of the vehicle.

Occupants should not lean on or sleep against the front center armrest or console in vehicles with a front center airbag.

(Continued)

Page 72

Black plate (23,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-23

Warning (Continued)

Occupants should not lean on or sleep against the door or side windows in seating positions with seat-mounted side impact airbags and/or roof-rail airbags.

Warning

{

Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Always secure children properly in the vehicle. To read how, see Older Children on

page 3-35 or Infants and Young Children on page 3-37.

There is an airbag readiness light on the instrument cluster, which shows the airbag symbol.

The system checks the airbag electrical system for malfunctions. The light tells you if there is an electrical problem. See Airbag Readiness Light on page 5-14 for more information.

Where Are the Airbags?

The driver frontal airbag is in the center of the steering wheel.

Page 73

Black plate (24,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-24 Seats and Restraints

The front outboard passenger frontal airbag is in the passenger

The front center airbag is in the inboard side of the driver seatback.

side instrument panel.

Driver Side Shown, Passenger

Side Similar

The driver and front outboard passenger seat-mounted side impact airbags are in the side of the seatbacks closest to the door.

Page 74

Black plate (25,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-25

Warning (Continued)

that person causing severe injury or even death. The path of an inflating airbag must be kept clear. Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any other airbag covering.

Driver Side Shown, Passenger

Side Similar

The roof-rail airbags for the driver, front outboard passenger, and second and third row outboard passengers are in the ceiling above the side windows.

Warning

{

If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into

(Continued)

Do not use seat or console accessories that block the inflation path of a seat-mounted side impact airbag or the front center airbag.

Never secure anything to the roof of a vehicle with roof-rail airbags by routing a rope or tie-down through any door or window opening. If you do, the path of an inflating roof-rail airbag will be blocked.

When Should an Airbag Inflate?

This vehicle is equipped with airbags. See Airbag System on page 3-21. Airbags are designed to inflate if the impact exceeds the specific airbag system's deployment threshold. Deployment thresholds are used to predict how severe a crash is likely to be in time for the airbags to inflate and help restrain the occupants. The vehicle has electronic sensors that help the airbag system determine the severity of the impact. Deployment thresholds can vary with specific vehicle design.

Frontal airbags are designed to inflate in moderate to severe frontal or near frontal crashes to help reduce the potential for severe injuries, mainly to the driver's or front outboard passenger's head and chest.

Whether the frontal airbags will or should inflate is not based primarily on how fast the vehicle is traveling.

Page 75

Black plate (26,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-26 Seats and Restraints

It depends on what is hit, the direction of the impact, and how quickly the vehicle slows down.

Frontal airbags may inflate at different crash speeds depending on whether the vehicle hits an object straight on or at an angle, and whether the object is fixed or moving, rigid or deformable, narrow or wide.

Frontal airbags are not intended to inflate during vehicle rollovers, rear impacts, or many side impacts.

In addition, the vehicle has advanced technology frontal airbags. Advanced technology frontal airbags adjust the restraint according to crash severity.

The front center airbag is designed to inflate in moderate to severe side crashes depending upon the location of the impact, when either side of the vehicle is struck. In addition, the front center airbag is designed to inflate when the sensing system predicts that the vehicle is about to roll over on its

side. The front center airbag is not designed to inflate in frontal impacts, near frontal impacts, or rear impacts.

Seat-mounted side impact airbags are designed to inflate in moderate to severe side crashes depending on the location of the impact. Seat-mounted side impact airbags are not designed to inflate in frontal impacts, near frontal impacts, rollovers, or rear impacts. A seat-mounted side impact airbag is designed to inflate on the side of the vehicle that is struck.

Roof-rail airbags are designed to inflate in moderate to severe side crashes depending on the location of the impact. In addition, these roof-rail airbags are designed to inflate during a rollover or in a severe frontal impact. Roof-rail airbags are not designed to inflate in rear impacts. Both roof-rail airbags will inflate when either side of the vehicle is struck, if the sensing

system predicts that the vehicle is about to roll over on its side, or in a severe frontal impact.

In any particular crash, no one can say whether an airbag should have inflated simply because of the vehicle damage or the repair costs.

What Makes an Airbag Inflate?

In a deployment event, the sensing system sends an electrical signal triggering a release of gas from the inflator. Gas from the inflator fills the airbag causing the bag to break out of the cover. The inflator, the airbag, and related hardware are all part of the airbag module.

For airbag locations, see Where Are the Airbags? on page 3-23.

How Does an Airbag Restrain?

In moderate to severe frontal or near frontal collisions, even belted occupants can contact the steering

Page 76

Black plate (27,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-27

wheel or the instrument panel. In moderate to severe side collisions, even belted occupants can contact the inside of the vehicle.

Airbags supplement the protection provided by safety belts by distributing the force of the impact more evenly over the occupant's body.

Rollover capable roof-rail airbags are also designed to help contain the head and chest of occupants in the outboard seating positions in the first, second, and third rows. The rollover capable roof-rail airbags are designed to help reduce the risk of full or partial ejection in rollover events, although no system can prevent all such ejections.

But airbags would not help in many types of collisions, primarily because the occupant's motion is not toward those airbags. See When

Should an Airbag Inflate? on page 3-25 for more information.

Airbags should never be regarded as anything more than a supplement to safety belts.

What Will You See after an Airbag Inflates?

After the frontal airbags and seat-mounted side impact airbags inflate, they quickly deflate, so quickly that some people may not even realize an airbag inflated. The front center airbag and roof-rail airbags may still be at least partially inflated for some time after they inflate. Some components of the airbag module may be hot for several minutes. For location of the airbags, see Where Are the Airbags? on page 3-23.

The parts of the airbag that come into contact with you may be warm, but not too hot to touch. There may be some smoke and dust coming from the vents in the deflated

airbags. Airbag inflation does not prevent the driver from seeing out of the windshield or being able to steer the vehicle, nor does it prevent people from leaving the vehicle.

Warning

{

When an airbag inflates, there may be dust in the air. This dust could cause breathing problems for people with a history of asthma or other breathing trouble. To avoid this, everyone in the vehicle should get out as soon as it is safe to do so. If you have breathing problems but cannot get out of the vehicle after an airbag inflates, then get fresh air by opening a window or a door. If you experience breathing problems following an airbag deployment, you should seek medical attention.

Page 77

Black plate (28,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-28 Seats and Restraints

The vehicle has a feature that may automatically unlock the doors, turn on the interior lamps and hazard warning flashers, and shut off the fuel system after the airbags inflate. The feature may also activate, without airbag inflation, after an event that exceeds a predetermined threshold. You can lock the doors, and turn off the interior lamps and hazard warning flashers by using the controls for those features.

Warning

{

A crash severe enough to inflate the airbags may have also damaged important functions in the vehicle, such as the fuel system, brake and steering systems, etc. Even if the vehicle appears to be drivable after a moderate crash, there may be concealed damage that could make it difficult to safely operate the vehicle.

(Continued)

Warning (Continued)

Use caution if you should attempt to restart the engine after a crash has occurred.

In many crashes severe enough to inflate the airbag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the front outboard passenger airbag.

Airbags are designed to inflate only once. After an airbag inflates, you will need some new parts for the airbag system. If you do not get them, the airbag system will not be there to help protect you in another crash. A new system will include airbag modules and possibly other parts. The service manual for the vehicle covers the need to replace other parts.

The vehicle has a crash sensing and diagnostic module which records information after a crash. See Vehicle Data

Recording and Privacy on page 13-14 and Event Data Recorders on page 13-14.

Let only qualified technicians work on the airbag systems. Improper service can mean that an airbag system will not work properly. See your dealer for service.

Passenger Sensing System

The vehicle has a passenger sensing system for the front outboard passenger position. The passenger airbag status indicator will light on the instrument panel when the vehicle is started.

Page 78

Black plate (29,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-29

United States

Canada and Mexico

The words ON and OFF, or the symbol for on and off, will be visible during the system check. When the system check is complete, either the word ON or OFF, or the symbol for on or off, will be visible. See

Passenger Airbag Status Indicator on page 5-14.

The passenger sensing system turns off the front outboard passenger frontal airbag under

certain conditions. No other airbag is affected by the passenger sensing system.

The passenger sensing system works with sensors that are part of the front outboard passenger seat. The sensors are designed to detect the presence of a properly-seated occupant and determine if the front outboard passenger frontal airbag should be allowed to inflate or not.

According to accident statistics, children are safer when properly secured in a rear seat in the correct child restraint for their weight and size.

Whenever possible, children age 12 and under should be secured in a rear seating position.

Never put a rear-facing child seat in the front. This is because the risk to the rear-facing child is so great, if the airbag inflates.

Warning

{

A child in a rear-facing child restraint can be seriously injured or killed if the passenger frontal airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the passenger frontal airbag inflates and the passenger seat is in a forward position.

Even if the passenger sensing system has turned off the passenger frontal airbag, no system is fail-safe. No one can guarantee that an airbag will not inflate under some unusual circumstance, even though the airbag is off.

(Continued)

Page 79

Black plate (30,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-30 Seats and Restraints

There is a critical problem with

Warning (Continued)

Secure rear-facing child restraints in a rear seat, even if the airbag is off. If you secure a forward-facing child restraint in the front outboard passenger seat, always move the seat as far back as it will go. It is better to secure the child restraint in a rear seat.

The passenger sensing system is designed to turn off the front outboard passenger frontal airbag if:

The front outboard passenger seat is unoccupied.

The system determines that an infant is present in a child restraint.

A front outboard passenger takes his/her weight off of the seat for a period of time.

the airbag system or the passenger sensing system.

When the passenger sensing system has turned off the front outboard passenger frontal airbag, the off indicator will light and stay lit as a reminder that the airbag is off. See Passenger Airbag Status Indicator on page 5-14.

The passenger sensing system is designed to turn on the front outboard passenger frontal airbag anytime the system senses that a person of adult size is sitting properly in the front outboard passenger seat.

When the passenger sensing system has allowed the airbag to be enabled, the on indicator will light and stay lit as a reminder that the airbag is active.

For some children, including children in child restraints, and for very small adults, the passenger sensing system may or may not turn off the front outboard passenger

frontal airbag, depending upon the person’s seating posture and body build. Everyone in the vehicle who has outgrown child restraints should wear a safety belt properly — whether or not there is an airbag for that person.

Warning

{

If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right away. See Airbag Readiness Light on page 5-14 for more information, including important safety information.

Page 80

Black plate (31,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-31

If the On Indicator Is Lit for a Child Restraint

The passenger sensing system is designed to turn off the front outboard passenger frontal airbag if the system determines that an infant is present in a child restraint. If a child restraint has been installed and the on indicator is lit:

1. Turn the vehicle off.

2. Remove the child restraint from the vehicle.

3. Remove any additional items from the seat such as blankets, cushions, seat covers, seat heaters, or seat massagers.

4. Reinstall the child restraint following the directions provided by the child restraint manufacturer and refer to

Securing Child Restraints (Rear Seat) on page 3-50 or Securing Child Restraints (Front Passenger Seat) on page 3-52.

5. If, after reinstalling the child restraint and restarting the vehicle, the on indicator is still lit, turn the vehicle off. Then slightly recline the vehicle seatback and adjust the seat cushion, if adjustable, to make sure that the vehicle seatback is not pushing the child restraint into the seat cushion.

Also make sure the child restraint is not trapped under the vehicle head restraint. If this happens, adjust the head restraint. See Head Restraints on page 3-2.

6. Restart the vehicle.

The passenger sensing system may or may not turn off the airbag for a child in a child restraint depending upon the child’s size. It is better to secure the child restraint in a rear seat.

If the Off Indicator Is Lit for an Adult-Sized Occupant

If a person of adult size is sitting in the front outboard passenger seat, but the off indicator is lit, it could be because that person is not sitting properly in the seat. Use the following steps to allow the system to detect that person and enable the front outboard passenger frontal airbag:

1. Turn the vehicle off.

Page 81

Black plate (32,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-32 Seats and Restraints

2. Remove any additional material from the seat, such as blankets, cushions, seat covers, seat heaters, or seat massagers. Also remove laptops, or other electronic devices.

3. Place the seatback in the fully upright position.

4. Have the person sit upright in the seat, centered on the seat cushion, with legs comfortably extended.

5. Restart the vehicle and have the person remain in this position for two to three minutes after the on indicator is lit.

Warning

{

If the front outboard passenger airbag is turned off for an adult-sized occupant, the airbag will not be able to inflate and help protect that person in a crash, resulting in an increased risk of

(Continued)

Warning (Continued)

serious injury or even death. An adult-sized occupant should not ride in the front outboard passenger seat, if the passenger airbag off indicator is lit.

Additional Factors Affecting System Operation

Safety belts help keep the passenger in position on the seat during vehicle maneuvers and braking, which helps the passenger sensing system maintain the passenger airbag status. See “Safety Belts” and “Child Restraints” in the Index for additional information about the importance of proper restraint use.

A thick layer of additional material, such as a blanket or cushion, or aftermarket equipment such as seat covers, seat heaters, and seat massagers can affect how well the passenger sensing system

operates. We recommend that you not use seat covers or other aftermarket equipment except when approved by GM for your specific vehicle. See Adding Equipment to

the Airbag-Equipped Vehicle on page 3-33 for more information

about modifications that can affect how the system operates.

A wet seat can affect the performance of the passenger sensing system. Here is how:

The passenger sensing system may turn off the passenger airbag when liquid is soaked into the seat. If this happens, the off indicator will be lit, and the airbag readiness light on the instrument panel will also be lit.

Liquid pooled on the seat that has not soaked in may make it more likely that the passenger sensing system will turn on the passenger airbag while a child restraint or child occupant is on

Page 82

Black plate (33,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-33

the seat. If the passenger airbag is turned on, the on indicator will be lit.

If the passenger seat gets wet, dry the seat immediately. If the airbag readiness light is lit, do not install a child restraint or allow anyone to occupy the seat. See Airbag Readiness Light on page 5-14 for important safety information.

The on indicator may be lit if an object, such as a briefcase, handbag, grocery bag, laptop or other electronic device, is put on an unoccupied seat. If this is not desired remove the object from the seat.

Warning

{

Stowing of articles under the passenger seat or between the passenger seat cushion and seatback may interfere with the proper operation of the passenger sensing system.

Servicing the Airbag-Equipped Vehicle

Airbags affect how the vehicle should be serviced. There are parts of the airbag system in several places around the vehicle. Your dealer and the service manual have information about servicing the vehicle and the airbag system. To purchase a service manual, see

Service Publications Ordering Information on page 13-11.

Warning

{

For up to 10 seconds after the vehicle is turned off and the battery is disconnected, an airbag can still inflate during improper service. You can be injured if you are close to an airbag when it inflates. Avoid yellow connectors. They are probably part of the airbag system. Be sure to follow

(Continued)

Warning (Continued)

proper service procedures, and make sure the person performing work for you is qualified to do so.

Adding Equipment to the Airbag-Equipped Vehicle

Adding accessories that change the vehicle's frame, bumper system, height, front end, or side sheet metal may keep the airbag system from working properly.

The operation of the airbag system can also be affected by changing any parts of the front seats, safety belts, airbag sensing and diagnostic module, steering wheel, instrument panel, roof-rail airbag modules, ceiling or pillar garnish trim, overhead console, front sensors, side impact sensors, airbag wiring, or front center console.

Page 83

Black plate (34,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-34 Seats and Restraints

Your dealer and the service manual have information about the location of the airbag sensors, sensing and diagnostic module, and airbag wiring.

In addition, the vehicle has a passenger sensing system that includes sensors as part of the front outboard passenger seat. The passenger sensing system may not operate properly if the original seat trim is replaced with non-GM covers, upholstery, or trim, or; with GM covers, upholstery, or trim designed for a different vehicle. Any object, such as an aftermarket seat heater or a comfort-enhancing pad or device, installed under or on top of the seat fabric, could also interfere with the operation of the passenger sensing system. This could either prevent proper deployment of the passenger airbag(s) or prevent the passenger sensing system from properly turning off the passenger airbag(s). See Passenger Sensing System on page 3-28.

If the vehicle has rollover roof-rail airbags, see Different Size Tires and Wheels on page 10-52 for additional information.

If you have to modify your vehicle because you have a disability and you have questions about whether the modifications will affect the vehicle's airbag system, or if you have questions about whether the airbag system will be affected if the vehicle is modified for any other reason, call Customer Assistance. See Customer Assistance Offices on page 13-3.

Airbag System Check

The airbag system does not need regularly scheduled maintenance or replacement. Make sure the airbag readiness light is working. See

Airbag Readiness Light on page 5-14.

Caution

{

If an airbag covering is damaged, opened, or broken, the airbag may not work properly. Do not open or break the airbag coverings. If there are any opened or broken airbag coverings, have the airbag covering and/or airbag module replaced. For the location of the airbags, see Where Are the Airbags? on page 3-23. See your dealer for service.

Replacing Airbag System Parts after a Crash

Warning

{

A crash can damage the airbag systems in the vehicle. A damaged airbag system may not work properly and may not

(Continued)

Page 84

Black plate (35,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-35

Warning (Continued)

protect you and your passenger(s) in a crash, resulting in serious injury or even death. To help make sure the airbag systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.

If an airbag inflates, you will need to replace airbag system parts. See your dealer for service.

If the airbag readiness light stays on after the vehicle is started or comes on when you are driving, the airbag system may not work properly. Have the vehicle serviced right away. See

Airbag Readiness Light on page 5-14.

Child Restraints

Older Children

Older children who have outgrown booster seats should wear the vehicle safety belts.

The manufacturer instructions that come with the booster seat state the weight and height limitations for that booster. Use a booster seat with a lap-shoulder belt until the child passes the fit test below:

Sit all the way back on the seat. Do the knees bend at the seat edge? If yes, continue. If no, return to the booster seat.

Buckle the lap-shoulder belt. Does the shoulder belt rest on the shoulder? If yes, continue. If no, try using the rear safety belt comfort guide, if available. See “Rear Safety Belt Comfort Guides” under Lap-Shoulder Belt on page 3-15. If a comfort guide is not available, or if the shoulder belt still does not rest on the shoulder, then return to the booster seat.

Does the lap belt fit low and snug on the hips, touching the thighs? If yes, continue. If no, return to the booster seat.

Page 85

Black plate (36,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-36 Seats and Restraints

Can proper safety belt fit be maintained for the length of the trip? If yes, continue. If no, return to the booster seat.

Q: What is the proper way to

wear safety belts?

A: An older child should wear a

lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs. This applies belt force to the child's pelvic bones in a crash. It should never be worn over the abdomen, which could cause severe or even fatal internal injuries in a crash.

Also see “Rear Safety Belt Comfort Guides” under Lap-Shoulder Belt on page 3-15.

According to accident statistics, children are safer when properly restrained in a rear seating position.

In a crash, children who are not buckled up can strike other people who are buckled up, or can be thrown out of the vehicle. Older children need to use safety belts properly.

Warning

{

Never allow more than one child to wear the same safety belt. The safety belt cannot properly spread the impact forces. In a crash, they can be crushed together and seriously injured. A safety belt must be used by only one person at a time.

Warning

{

Never allow a child to wear the safety belt with the shoulder belt behind their back. A child can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, the child would not be restrained by the shoulder belt. The child could move too far forward increasing the chance of head and neck injury. The child might also slide under the lap

(Continued)

Page 86

Black plate (37,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-37

Warning (Continued)

belt. The belt force would then be applied right on the abdomen. That could cause serious or fatal injuries. The shoulder belt should go over the shoulder and across the chest.

Infants and Young Children

Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.

{

Warning

Warning (Continued)

the way back into the retractor, but it cannot do this if it is wrapped around a child’s neck. If the shoulder belt is locked and tightened around a child’s neck, the only way to loosen the belt is to cut it.

Never leave children unattended in a vehicle and never allow children to play with the safety belts.

Every time infants and young children ride in vehicles, they should have the protection provided by appropriate child restraints. Neither the vehicle’s safety belt system nor its airbag system is designed for them.

Children who are not restrained properly can strike other people, or can be thrown out of the vehicle.

(Continued)

Page 87

Black plate (38,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-38 Seats and Restraints

Warning

{

Never hold an infant or a child while riding in a vehicle. Due to crash forces, an infant or a child will become so heavy it is not possible to hold it during a crash. For example, in a crash at only 40 km/h (25 mph), a 5.5 kg (12 lb) infant will suddenly become a 110 kg (240 lb) force on a person's arms. An infant should be secured in an appropriate restraint.

Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Never put a rear-facing child restraint in the front passenger seat. Secure a rear-facing child restraint in a rear seat.

It is also better to secure a forward-facing child restraint in a rear seat. If a forward-facing child

{

Warning

Warning (Continued)

restraint must be secured in the front passenger seat, always move the front passenger seat as far back as it will go.

If a child restraint is installed in the second row center seat, move the second row seat to the rearward position, whenever possible, to minimize contact with the front center airbag.

(Continued)

Page 88

Black plate (39,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-39

Q: What are the different types of

add-on child restraints?

A: Add-on child restraints, which

are purchased by the vehicle owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child's weight, height, and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used.

For most basic types of child restraints, there are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, the restraint will have a label saying that it meets federal motor vehicle safety standards.

The restraint manufacturer instructions that come with the restraint state the weight and height limitations for a particular child restraint. In addition, there are many kinds of restraints available for children with special needs.

Warning

{

To reduce the risk of neck and head injury during a crash, infants need complete support. In a crash, if an infant is in a rear-facing child restraint, the crash forces can be distributed across the strongest part of an infant's body, the back and shoulders. Infants should always be secured in rear-facing child restraints.

Warning

{

A young child's hip bones are still so small that the vehicle's regular safety belt may not remain low on the hip bones, as it should. Instead, it may settle up around the child's abdomen. In a crash, the belt would apply force on a body area that is unprotected by any bony structure. This alone could cause serious or fatal injuries. To reduce the risk of serious or fatal injuries during a crash, young children should always be secured in appropriate child restraints.

Page 89

Black plate (40,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-40 Seats and Restraints

Child Restraint Systems

Forward-Facing Child Seat

Rear-Facing Infant Seat

A rear-facing infant seat provides restraint with the seating surface against the back of the infant.

The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint.

A forward-facing child seat provides restraint for the child's body with the harness.

Booster Seats

A booster seat is a child restraint designed to improve the fit of the vehicle's safety belt system. A booster seat can also help a child to see out the window.

Page 90

Black plate (41,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-41

Securing an Add-On Child Restraint in the Vehicle

Warning

{

A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child restraint properly in the vehicle using the vehicle safety belt or LATCH system, following the instructions that came with that child restraint and the instructions in this manual.

To help reduce the chance of injury, the child restraint must be secured in the vehicle. Child restraint systems must be secured in vehicle seats by lap belts or the lap belt portion of a lap-shoulder belt, or by the LATCH system. See Lower

Anchors and Tethers for Children (LATCH System) on page 3-43.

Children can be endangered in a crash if the child restraint is not properly secured in the vehicle.

When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this manual. The child restraint instructions are important, so if they are not available, obtain a replacement copy from the manufacturer.

Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in the vehicle — even when no child is in it.

In some areas of the United States and Canada, Certified Child Passenger Safety Technicians (CPSTs) are available to inspect and demonstrate how to correctly use and install child restraints. In the U.S., refer to the National Highway Traffic Safety

Administration (NHTSA) website to locate the nearest child safety seat inspection station. For CPST availability in Canada, check with Transport Canada or the Provincial Ministry of Transportation office.

Securing the Child Within the Child Restraint

Warning

{

A child can be seriously injured or killed in a crash if the child is not properly secured in the child restraint. Secure the child properly following the instructions that came with that child restraint.

Where to Put the Restraint

According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position.

Page 91

Black plate (42,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-42 Seats and Restraints

Whenever possible, children age 12 and under should be secured in a rear seating position.

The vehicle is equipped with a front center airbag in the inboard side of the driver seat. Even with a front center airbag, a child restraint can be installed in any second row seating position.

Never put a rear-facing child seat in the front. This is because the risk to the rear-facing child is so great if the airbag deploys.

Warning

{

A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously

(Continued)

Warning (Continued)

injured or killed if the right front passenger airbag inflates and the passenger seat is in a forward position.

Even if the passenger sensing system has turned off the right front passenger frontal airbag, no system is fail-safe. No one can guarantee that an airbag will not deploy under some unusual circumstance, even though it is turned off. Secure rear-facing child restraints in a rear seat, even if the front passenger frontal airbag is off.

It is also better to secure a forward-facing child restraint in a rear seat. If a forward-facing child restraint must be secured in the right front seat, always move the front passenger seat as far back as it will go.

(Continued)

Warning (Continued)

See Passenger Sensing System on page 3-28 for additional

information.

If a child restraint is installed in a second row center seat, move the second row seat to the rearward position, whenever possible, to minimize contact with the front center airbag.

When securing a child restraint in a rear seating position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle.

Child restraints and booster seats vary considerably in size, and some may fit in certain seating positions better than others.

Depending on where you place the child restraint and the size of the child restraint, you may not be able to access adjacent safety belt assemblies or LATCH anchors for

Page 92

Black plate (43,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-43

additional passengers or child restraints. Adjacent seating positions should not be used if the child restraint prevents access to or interferes with the routing of the safety belt.

Wherever a child restraint is installed, be sure to secure the child restraint properly.

Lower Anchors and Tethers for Children (LATCH System)

The LATCH system secures a child restraint during driving or in a crash. LATCH attachments on the child restraint are used to attach the child restraint to the anchors in the

vehicle. The LATCH system is designed to make installation of a child restraint easier.

In order to use the LATCH system in your vehicle, you need a child restraint that has LATCH attachments. LATCH-compatible rear-facing and forward-facing child seats can be properly installed using either the LATCH anchors or the vehicle’s safety belts. Do not use both the safety belts and the LATCH anchorage system to secure a rear-facing or forward-facing child seat.

Booster seats use the vehicle’s safety belts to secure the child in the booster seat. If the manufacturer recommends that the booster seat be secured with the LATCH system, this can be done as long as the booster seat can be positioned properly and there is no interference with the proper positioning of the lap-shoulder belt on the child.

Make sure to follow the instructions that came with the child restraint, and also the instructions in this manual.

When installing a child restraint with a top tether, you must also use either the lower anchors or the safety belts to properly secure the child restraint. A child restraint must never be installed using only the top tether and anchor.

The LATCH anchorage system can be used until the combined weight of the child plus the child restraint is

29.5 kg (65 lbs). Use the safety belt alone instead of the LATCH anchorage system once the combined weight is more than

29.5 kg (65 lbs).

The following explains how to attach a child restraint with these attachments in the vehicle.

Not all vehicle seating positions or child restraints have lower anchors and attachments or top tether anchors and attachments.

Page 93

Black plate (44,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-44 Seats and Restraints

Lower Anchors

Lower anchors (1) are metal bars built into the vehicle. There are two lower anchors for each LATCH seating position that will accommodate a child restraint with lower attachments (2).

Top Tether Anchor

A top tether (3, 4) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (2) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash.

The child restraint may have a single tether (3) or a dual tether (4). Either will have a single attachment (2) to secure the top tether to the anchor.

Some child restraints with top tethers are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. Be sure to read and follow the instructions for your child restraint.

Page 94

Black plate (45,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Lower Anchor and Top Tether Anchor Locations

Seats and Restraints 3-45

Second Row — 60/40 Bench

I (Top Tether Anchor): Seating

Second Row — Bucket

I (Top Tether Anchor): Seating

positions with top tether anchors.

H (Lower Anchor): Seating

positions with two lower anchors.

H (Lower Anchor): Seating

positions with two lower anchors.

Third Row

I (Top Tether Anchor): Seating

positions with top tether anchors.

To assist in locating the lower anchors, each second row anchor position has a label, near the crease between the seatback and the seat cushion.

Page 95

Black plate (46,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-46 Seats and Restraints

Be sure to use an anchor on the same side of the vehicle as the seating position where the child restraint will be placed.

To assist in locating the top tether anchors, the top tether anchor symbol is near the anchor.

Third Row

The third row has one top tether anchor at the bottom rear of the center seatback. This anchor should

Second Row — Bucket Shown,

Bench Similar

The top tether anchors are at the bottom rear of the seatback for each seating position in the second row.

be used for the center seating position only. Never install two top tethers using the same top tether anchor.

Do not secure a child restraint in a position without a top tether anchor if a national or local law requires

that the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be attached.

According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position. See Where to Put the Restraint on page 3-41 for additional information.

Securing a Child Restraint Designed for the LATCH System

Warning

{

If a LATCH-type child restraint is not attached to anchors or with the safety belt, the child restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. Install a LATCH-type child

(Continued)

Page 96

Black plate (47,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-47

Warning (Continued)

restraint properly using the anchors, or use the vehicle safety belts to secure the restraint, following the instructions that came with the child restraint and the instructions in this manual.

Warning

{

To reduce the risk of serious or fatal injuries during a crash, do not attach more than one child restraint to a single anchor. Attaching more than one child restraint to a single anchor could cause the anchor or attachment to come loose or even break during a crash. A child or others could be injured.

Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck. The shoulder belt can tighten but cannot be loosened if it is locked. The shoulder belt locks when it is pulled all the way out of the retractor. It unlocks when the shoulder belt is allowed to go all the way back into the retractor, but it cannot do this if it is wrapped around a child’s neck. If the shoulder belt is locked and tightened around a child’s neck, the only way to loosen the belt is to cut it.

Buckle any unused safety belts behind the child restraint so children cannot reach them. Pull the shoulder belt all the way out of the retractor to set the lock, and tighten the belt behind the child restraint after the child restraint has been installed.

{

Warning

Caution

{

Do not let the LATCH attachments rub against the vehicle’s safety belts. This may damage these parts. If necessary, move buckled safety belts to avoid rubbing the LATCH attachments.

Do not fold the empty rear seat with a safety belt buckled. This could damage the safety belt or the seat. Unbuckle and return the safety belt to its stowed position, before folding the seat.

The vehicle is equipped with a front center airbag in the inboard side of the driver seat. Even with a front center airbag, a child restraint can be installed in any second row seating position. If a child restraint is installed in a second row center seat, move the second row seat to

Page 97

Black plate (48,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-48 Seats and Restraints

the rearward position, whenever possible, to minimize contact with the front center airbag.

If you need to secure more than one child restraint in the rear seat, see

Where to Put the Restraint on page 3-41.

This system is designed to make installation of child restraints easier. When using lower anchors, do not use the vehicle's safety belts. Instead, use the vehicle's anchors and child restraint attachments to secure the restraints. Some restraints also use another vehicle anchor to secure a top tether.

1. Attach and tighten the lower attachments to the lower anchors. If the child restraint does not have lower attachments or the desired seating position does not have lower anchors, secure the child restraint with the top tether and the safety belts. Refer to your

child restraint manufacturer instructions and the instructions in this manual.

1.1. Find the lower anchors for the desired seating position.

1.2. To access the lower anchors in the second row, it may help to recline the seatback.

Third row seatbacks must be upright before placing the child restraint on the seat.

1.3. Put the child restraint on the seat.

1.4. Attach and tighten the lower attachments on the child restraint to the lower anchors.

If necessary, adjust the angle of the second row seatback to achieve a tight installation. Make sure the

second row bench seatbacks are aligned at the same angle.

2. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if the vehicle has one. Refer to the child restraint instructions and the following steps:

2.1. Find the top tether anchor.

2.2. Route, attach, and tighten

the top tether according to your child restraint instructions and the following instructions:

Page 98

Black plate (49,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

Seats and Restraints 3-49

If the position you are using does not have a headrest or head restraint and you are using a single tether, route the tether over the seatback.

If the position you are using has a fixed headrest or head restraint and you are using a dual tether, route the tether around the headrest or head restraint.

If the position you are using does not have a headrest or head restraint and you are using a dual tether, route the tether over the seatback.

If the position you are using has a fixed headrest or head restraint and you are

using a single tether, route the tether over the headrest or head restraint.

3. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the LATCH path and attempt to move it side to side and back and forth. There should be no more than 2.5 cm (1 in) of movement, for proper installation.

Replacing LATCH System Parts After a Crash

Warning

{

A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help make sure the LATCH system is

(Continued)

Page 99

Black plate (50,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

3-50 Seats and Restraints

Warning (Continued)

working properly after a crash, see your dealer to have the system inspected and any necessary replacements made as soon as possible.

If the vehicle has the LATCH system and it was being used during a crash, new LATCH system parts may be needed.

New parts and repairs may be necessary even if the LATCH system was not being used at the time of the crash.

Securing Child Restraints (Rear Seat)

The vehicle is equipped with a front center airbag in the inboard side of the driver seat. Even with a front center airbag, a child restraint can be installed in any second row seating position. If you install a child restraint in a second row center

seat, move the second row seat to the rearward position, whenever possible, to minimize contact with the front center airbag.

When securing a child restraint in a rear seating position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle.

If the child restraint has the LATCH system, see Lower Anchors and

Tethers for Children (LATCH System) on page 3-43 for how and

where to install the child restraint using LATCH. If a child restraint is secured in the vehicle using a safety belt and it uses a top tether, see Lower Anchors and Tethers for

Children (LATCH System) on page 3-43 for top tether anchor

locations.

Do not secure a child seat in a position without a top tether anchor if a national or local law requires that the top tether be anchored, or if

the instructions that come with the child restraint say that the top strap must be anchored.

In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached.

If the child restraint or vehicle seat position does not have the LATCH system, you will be using the safety belt to secure the child restraint in this position. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say.

If more than one child restraint needs to be installed in the rear seat, be sure to read Where to Put the Restraint on page 3-41.

1. Put the child restraint on the seat.

2. Pick up the latch plate, and run the lap and shoulder portions of the vehicle's safety belt through

Page 100

Black plate (51,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

or around the restraint. The child restraint instructions will show you how.

Seats and Restraints 3-51

4. Pull the shoulder belt all the way out of the retractor to set the lock. When the retractor lock is set, the shoulder belt can be

3. Push the latch plate into the buckle until it clicks.

tightened but not pulled out of the retractor.

Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary.

5. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt.

Try to pull the belt out of the retractor to make sure the retractor is locked. If the retractor is not locked, repeat Steps 4 and 5.

Buick Enclave 1 2015 Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Introduction iii

Canadian Vehicle Owners

Using this Manual

Danger, Warnings, and Cautions

Symbols

In Brief

Instrument Panel

Initial Drive Information

Remote Keyless Entry (RKE) System

Remote Vehicle Start

Liftgate

Door Locks

Windows

Seat Adjustment

Memory Features

Second Row Seats

Third Row Seats

Heated and Cooled Front Seats

Head Restraint Adjustment

Safety Belts

Passenger Sensing System

Mirror Adjustment

Steering Wheel Adjustment

Interior Lighting

Exterior Lighting

Windshield Wiper/Washer

Climate Controls

Transmission

Vehicle Features

Infotainment System

Radio(s)

Satellite Radio

Portable Audio Devices

Steering Wheel Controls

Cruise Control

Forward Collision Alert (FCA) System

Lane Departure Warning (LDW)

Side Blind Zone Alert (SBZA)

Rear Vision Camera (RVC)

Rear Cross Traffic Alert (RCTA) System

Parking Assist

Power Outlets

Universal Remote System

Sunroof

Performance and Maintenance

Traction Control/ Electronic Stability Control

Tire Pressure Monitor

Engine Oil Life System

Driving for Better Fuel Economy

Roadside Assistance Program

Keys, Doors, and Windows

Keys and Locks

Keys

Remote Keyless Entry (RKE) System

Remote Keyless Entry (RKE) System Operation

Remote Vehicle Start

Door Locks

Power Door Locks

Delayed Locking

Automatic Door Locks

Lockout Protection

Safety Locks

Doors

Liftgate

Vehicle Security

Vehicle Alarm System

Immobilizer

Immobilizer Operation

Exterior Mirrors

Convex Mirrors

Power Mirrors

Folding Mirrors

Heated Mirrors

Automatic Dimming Mirror

Park Tilt Mirrors

Interior Mirrors