Buick 2016 Envision Owner's Manual

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Contents

Introduction . . . . . . . .. . . . . . . .. . . . . . 2

In Brief . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Keys, Doors, and Windows . . . . . 25

Seats and Restraints . . . . . . . . . . . 49

Storage . . . . . . . . . . . . . . . . . . . . . . . . . 97

Instruments and Controls . . . . . . 102

Lighting . . . . . . . . . . . . . . . . . . . . . . . 155

Infotainment System . . . . . . . . . . 163

Climate Controls . . . . . . . . . . . . . . 240

Driving and Operating . . . . . . . . . 247

Vehicle Care . . . . . . . . . . . . . . . . . . 309

Service and Maintenance . . . . . 381

Technical Data . . . . . . . . . . . . . . . . 393

Customer Information . . . . . . . . . 396

Reporting Safety Defects . . . . . . 406

OnStar .... . . . . . . . . . . . . . . . . . . . . 410

Index . . . . . . . . . . . . . . . . . . . . 420

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

2 Introduction

Introduction

The names, logos, emblems,
slogans, vehicle model names, and
vehicle body designs appearing in
this manual including, but not limited
to, GM, the GM logo, BUICK, the
BUICK Emblem, and Envision are
trademarks and/or service marks of
General Motors LLC, its
subsidiaries, affiliates, or licensors.

For vehicles first sold in Canada,
substitute the name “General
Motors of Canada Company” for
Buick Motor Division wherever it
appears in this manual.

This manual describes features that
may or may not be on the vehicle
because of optional equipment that
was not purchased on the vehicle,
model variants, country
specifications, features/applications
that may not be available in your
region, or changes subsequent to
the printing of this owner manual.

Refer to the purchase
documentation relating to your
specific vehicle to confirm the
features.

Keep this manual in the vehicle for
quick reference.

Canadian Vehicle Owners

A French language manual can be
obtained from your dealer, at
www.helminc.com, or from:

Propriétaires Canadiens

On peut obtenir un exemplaire de
ce guide en français auprès du
concessionnaire ou à l'adresse
suivante:

Helm, Incorporated
Attention: Customer Service
47911 Halyard Drive
Plymouth, MI 48170
USA

Using this Manual

To quickly locate information about
the vehicle, use the Index in the
back of the manual. It is an
alphabetical list of what is in the
manual and the page number where
it can be found.

About Driving the Vehicle

As with other vehicles of this type,
failure to operate this vehicle
correctly may result in loss of
control or an accident. Be sure to
read the driving guidelines in this
manual in the section called “Driving
and Operating” and specifically

Driver Behavior 0 248, Driving
Environment 0 248, and Vehicle
Design 0 248.

Litho in U.S.A.
Part No. 22949621 A First Printing

©

2016 General Motors LLC. All Rights Reserved.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Introduction 3

Danger, Warning, and
Caution

Warning messages found on vehicle
labels and in this manual describe
hazards and what to do to avoid or
reduce them.

{

Danger

Danger indicates a hazard with a
high level of risk which will result
in serious injury or death.

{

Warning

Warning indicates a hazard that
could result in injury or death.

Caution

Caution indicates a hazard that
could result in property or vehicle
damage.

A circle with a slash through it is a
safety symbol which means “Do
Not,” “Do not do this,” or “Do not let
this happen.”

Symbols

The vehicle has components and
labels that use symbols instead of
text. Symbols are shown along with
the text describing the operation or
information relating to a specific
component, control, message,
gauge, or indicator.

M : Shown when the owner

manual has additional instructions
or information.

* : Shown when the service

manual has additional instructions
or information.

0 : Shown when there is more

information on another page —
“see page.”

Vehicle Symbol Chart

Here are some additional symbols
that may be found on the vehicle
and what they mean. For more
information on the symbol, refer to
the Index.

9 : Airbag Readiness Light
# : Air Conditioning

! : Antilock Brake System (ABS)
$ : Brake System Warning Light
" : Charging System

I : Cruise Control

` : Do Not Puncture
^ : Do Not Service

B : Engine Coolant Temperature

O : Exterior Lamps

_ : Flame/Fire Prohibited

# : Fog Lamps

. : Fuel Gauge

+ : Fuses

3 : Headlamp High/Low-Beam

Changer

j : LATCH System Child Restraints

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

4 Introduction

* : Malfunction Indicator Lamp
: : Oil Pressure
Q : OnStar

®

} : Power
/ : Remote Vehicle Start

> : Safety Belt Reminders

% : Steering Wheel Controls
7 : Tire Pressure Monitor

d : Traction Control/StabiliTrak

®

a : Under Pressure
M : Windshield Washer Fluid

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

In Brief 5

In Brief

Instrument Panel

Instrument Panel Overview . . . . . . 6

Initial Drive Information

Initial Drive Information . . . . . . . . . . 8

Remote Keyless Entry (RKE)

System . . . . . . . . . . . . . . . . . . . . . . . . 8

Remote Vehicle Start . . . . . . . . . . . 9

Door Locks . . . . . . . . . . . . . . . . . . . . . 9

Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Seat Adjustment . . . . . . . . . . . . . . . 10

Memory Features . . . . . . . . . . . . . . 11

Heated and Cooled Front

Seats . . . . . . . . . . . . . . . . . . . . . . . . . 11

Head Restraint Adjustment . . . . 12

Safety Belts . . . . . . . . . . . . . . . . . . . . 12

Passenger Sensing System . . . 12

Mirror Adjustment . . . . . . . . . . . . . . 13

Steering Wheel Adjustment . . . . 14

Interior Lighting . . . . . . . . . . . . . . . . 14

Exterior Lighting . . . . . . . . . . . . . . . 15

Windshield Wiper/Washer . . . . . . 15

Climate Controls . . . . . . . . . . . . . . . 17

Transmission . . . . . . . . . . . . . . . . . . 17

Vehicle Features

Steering Wheel Controls . . . . . . . 18

Cruise Control . . . . . . . . . . . . . . . . . 18

Driver Information

Center (DIC) . . . . . . . . . . . . . . . . . 19

Forward Collision Alert (FCA)

System . . . . . . . . . . . . . . . . . . . . . . . 19

Front Automatic Braking (FAB)

System . . . . . . . . . . . . . . . . . . . . . . . 19

Lane Keep Assist (LKA) . . . . . . . 20

Lane Change Alert (LCA) . . . . . . 20

Surround Vision . . . . . . . . . . . . . . . 20

Rear Vision Camera (RVC) . . . . 20

Rear Cross Traffic Alert (RCTA)

System . . . . . . . . . . . . . . . . . . . . . . . 20

Parking Assist . . . . . . . . . . . . . . . . . 21

Automatic Parking

Assist (APA) . . . . . . . . . . . . . . . . . . 21

Power Outlets . . . . . . . . . . . . . . . . . 21

Universal Remote System . . . . . 21

Sunroof . . . . . . . . . . . . . . . . . . . . . . . . 22

Performance and Maintenance

Traction Control/Electronic

Stability Control . . . . . . . . . . . . . . 23

Tire Pressure Monitor . . . . . . . . . . 23

Engine Oil Life System . . . . . . . . 23

Driving for Better Fuel

Economy . . . . . . . . . . . . . . . . . . . . . 24

Roadside Assistance

Program . . . . . . . . . . . . . . . . . . . . . . 24

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

6 In Brief

Instrument Panel

Instrument Panel Overview

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

In Brief 7

1. Air Vents 0 244.

2. Turn Signal Lever. See Turn

and Lane-Change
Signals 0 159.

3. Instrument Cluster 0 111.

Driver Information Center
Display. See Driver Information

Center (DIC) (Base Level)
0 128 or Driver Information
Center (DIC) (Uplevel) 0 131.

4. Windshield Wiper/
Washer 0 104.

Rear Window Wiper/
Washer 0 106.

5. Hazard Warning
Flashers 0 159.

6. AM-FM Radio 0 170.

7. Light Sensor. See Automatic
Headlamp System 0 157.

8. Lane Keep Assist (LKA) 0 296
(If Equipped).

Assistance Systems for
Parking or Backing 0 285 (If

Equipped).

9. Clock 0 107.

10. Heated and Cooled Front
Seats 0 55 (If Equipped).

11. Dual Automatic Climate Control
System 0 240.

12. Traction Control/Electronic
Stability Control 0 273.

13. Electric Parking Brake 0 271.

14. Shift Lever. See Automatic
Transmission 0 267.

15. ENGINE START/STOP Button.
See Ignition Positions 0 259.

16. Steering Wheel Controls 0 103
(If Equipped).

Driver Information Center (DIC)
Buttons. See Driver Information

Center (DIC) (Base Level)
0 128 or Driver Information
Center (DIC) (Uplevel) 0 131.

17. Horn 0 104.

18. Steering Wheel
Adjustment 0 103.

19. Cruise Control 0 275.

Adaptive Cruise Control 0 277

(If Equipped).

Heated Steering Wheel 0 104

(If Equipped).

Forward Collision Alert (FCA)
System 0 290 (If Equipped).

20. Data Link Connector (DLC)
(Out of View). See Malfunction

Indicator Lamp (Check Engine
Light) 0 119.

21. Front Storage 0 97.

22. Instrument Panel Illumination

Control 0 160.

Head-Up Display (HUD) 0 133

(If Equipped) (Out of View).

23. Exterior Lamp Controls 0 155.

Fog Lamps 0 160 (If
Equipped).

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

8 In Brief

Initial Drive
Information

This section provides a brief
overview about some of the
important features that may or may
not be on your specific vehicle.

For more detailed information, refer
to each of the features which can be
found later in this owner manual.

Remote Keyless Entry
(RKE) System

The Remote Keyless Entry (RKE)
transmitter may work up to
60 m (197 ft) away from the vehicle.

Press this button to remove the key.
The key can be used to open the
driver door.

K : Press to unlock the driver door

or all doors.

For vehicles with the manual
liftgate, press

K twice within

five seconds to unlock the liftgate.

Q : Press to lock all doors.

Lock and unlock feedback can be
personalized.

b : If equipped, press twice

quickly to open or close the liftgate.
Press and release once to stop the
liftgate from moving.

7 : Press and release to initiate

vehicle locator. Press and hold for at
least three seconds to sound the

panic alarm. Press

7 again to

cancel the panic alarm.

/ : Press and release Q and then

immediately press and hold

/ for at

least four seconds to start the
engine from outside the vehicle
using the RKE transmitter.

See Keys 0 25 and Remote Keyless
Entry (RKE) System Operation 0 26.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

In Brief 9

Remote Vehicle Start

If equipped, the engine can be
started from outside of the vehicle.

Starting the Vehicle

1. Press and release Q on the

RKE transmitter.

2. Immediately press and hold

/

for at least four seconds or until
the turn signal lamps flash.

Start the vehicle normally after
entering.

When the vehicle starts, the parking
lamps will turn on.

Remote start can be extended.

Canceling a Remote Start

To cancel a remote start, do one of
the following:

.

Press and hold

/ until the

parking lamps turn off.

.

Turn on the hazard warning
flashers.

.

Turn the vehicle on and then off.

See Remote Vehicle Start 0 32.

Door Locks

See Door Locks 0 33.

Keyless Access

If equipped with Keyless Access,
the RKE transmitter must be within
1 m (3 ft) of the door being opened.
Press the button on the door handle
to open. The liftgate is also
unlocked when the RKE transmitter
is within range of the liftgate handle.
Press the touch pad underneath the
handle and lift.

See “Keyless Access Operation” in

Remote Keyless Entry (RKE)
System Operation 0 26.

Liftgate

To open the liftgate, press K on the
power door lock switch or press

K

on the Remote Keyless Entry (RKE)
transmitter twice to unlock all doors.
Press the touch pad on the
underside of the liftgate handle and
lift up. See Remote Keyless Entry
(RKE) System Operation 0 26.

Use the pull cup to lower and close
the liftgate. Do not press the touch
pad while closing the liftgate. This
will cause the liftgate to be
unlatched.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

10 In Brief

Power Liftgate Operation

If equipped with a power liftgate, the
switch is on the driver door. The
vehicle must be in P (Park).

Choose the power liftgate mode by
selecting MAX or 3/4. Press

8 on

the driver door. The driver door
must be unlocked. On the RKE

transmitter press

b twice quickly

until the liftgate starts moving.

Press any liftgate button while the
liftgate is moving to stop it. Pressing
again reverses the direction.

To close, press

l on the bottom

of the liftgate next to the pull cup.

To disable the power liftgate
function, select OFF on the liftgate
switch. See Liftgate 0 36.

Seat Adjustment

Power Seat

To adjust a power seat:

.

Move the seat forward or
rearward by sliding the control
forward or rearward.

.

Raise or lower the front part of
the seat cushion by moving the
front of the control up or down.

.

Raise or lower the entire seat by
moving the rear of the control up
or down.

See Power Seat Adjustment 0 52.

Lumbar Support

To adjust the lumbar support,
if equipped:

.

Press the front or rear of the
switch to increase or decrease
lumbar support.

.

Press the top or bottom of the
switch to raise or lower the
lumbar support.

.

Release the switch when the
level of support is reached.

See Lumbar Adjustment 0 52.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

In Brief 11

Reclining Seatbacks

Power Reclining Seatbacks

To adjust a power seatback:

.

Tilt the top of the control
rearward to recline.

.

Tilt the top of the control forward
to raise.

See Reclining Seatbacks 0 53.

Memory Features

If equipped, the 1, 2, SET, and B
(Exit) buttons on the driver door are
used to manually store and recall
memory settings for the driver seat,
outside mirrors, and power tilt and
telescoping steering column
positions.

Automatic Memory Recall and/or
Easy Exit Recall features may be
enabled in the vehicle
personalization menus to
automatically recall positions stored

to the 1, 2, and

B buttons.

See Memory Seats 0 53 and
Vehicle Personalization 0 146.

Heated and Cooled Front
Seats

If equipped, the buttons are near the
climate controls. To operate, the
engine must be running.

Press

J or z to heat the driver or

passenger seat cushion and
seatback.

If equipped, press

C or { to cool

the driver or passenger seat.

Three lights next to the button
indicate the temperature setting.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

12 In Brief

See Heated and Cooled Front
Seats 0 55.

Head Restraint
Adjustment

Do not drive until the head restraints
for all occupants are installed and
adjusted properly.

To achieve a comfortable seating
position, change the seatback
recline angle as little as necessary
while keeping the seat and the head
restraint height in the proper
position.

See Head Restraints 0 50 and
Reclining Seatbacks 0 53.

Safety Belts

Refer to the following sections for
important information on how to use
safety belts properly:

.

Safety Belts 0 58.

.

How to Wear Safety Belts
Properly 0 59.

.

Lap-Shoulder Belt 0 60.

.

Lower Anchors and Tethers for
Children (LATCH System) 0 85.

Passenger Sensing
System

United States

Canada and Mexico

The passenger sensing system will
turn off the front outboard
passenger frontal airbag and knee
airbag under certain conditions. No
other airbag is affected by the
passenger sensing system. See
Passenger Sensing System 0 72.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

In Brief 13

The passenger airbag status
indicator lights on the overhead
console are visible when the vehicle
is started. See Passenger Airbag
Status Indicator 0 118.

Mirror Adjustment

Interior Mirrors

Adjust the rearview mirror for a clear
view of the area behind your
vehicle.

Automatic Rearview Mirror

If equipped, automatic dimming
reduces the glare of headlamps
from behind. The dimming feature
comes on when the vehicle is
started.

Exterior Mirrors

Power Mirrors

To adjust the mirrors:

1. Move the selector switch to L
(Left) or R (Right) to choose
the driver or passenger mirror.

2. Press the arrows on the control
pad to move each mirror to the
desired position.

3. Return the selector switch to
the center position.

See Power Mirrors 0 43.

Manual Folding Mirrors

The outside mirrors fold inward to
prevent damage when going
through an automatic car wash. To
fold, push the mirror toward the
vehicle. Push outward to return to
the original position.

Heated Mirrors

If equipped, press

K to heat the

outside mirrors.

See “Rear Window Defogger” under

Dual Automatic Climate Control
System 0 240.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

14 In Brief

Steering Wheel
Adjustment

To adjust the steering wheel:

1. Pull the lever down.

2. Move the steering wheel up
or down.

3. Pull or push the steering wheel
closer or away from you.

4. Pull the lever up to lock the
steering wheel in place.

Do not adjust the steering wheel
while driving.

Interior Lighting

Dome Lamp

The dome lamp is in the overhead
console.

To change the dome lamp settings,
press the following:

* : Turns the lamp off, even when

a door is open.

1 : The lamp comes on when a

door is opened.

+ : Turns the lamp on.

Reading Lamps

There are reading lamps on the
overhead console and over the rear
passenger doors. These lamps
come on when any door is opened.

Front Reading Lamps

The reading lamps in the overhead
console are operated by touch.
Touch the lamp for dim light, touch
again for bright light, and touch
again to turn the light off.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

In Brief 15

Rear Reading Lamps

Press the lamp lens to turn the rear
passenger reading lamps on or off.

For more information on interior
lighting, see Instrument Panel
Illumination Control 0 160.

Exterior Lighting

The exterior lamp control is on the
instrument panel on the outboard
side of the steering wheel.

Turn the control to the following
positions:

O : Turns off the exterior lamps.

The knob returns to the AUTO
position after it is released. Turn to

O again to reactivate the

AUTO mode.

AUTO : Automatically turns the
exterior lamps on and off,
depending on outside lighting.

; : Turns on the parking lamps

including all lamps, except the
headlamps.

2 : Turns on the headlamps

together with the parking lamps and
instrument panel lights.

See:

.

Exterior Lamp Controls 0 155.

.

Fog Lamps 0 160.

Windshield Wiper/Washer

Windshield Wiper with Rainsense

(AUTO Shown)

Windshield Wiper with Intermittent

Wipes (INT Shown)

With the ignition in ACC/
ACCESSORY or ON/RUN/START,
move the windshield wiper lever to
select the wiper speed.

HI : Use for fast wipes.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

16 In Brief

LO : Use for slow wipes.

INT : Use for intermittent wipes. To

adjust wipe frequency, turn the band
up for more frequent wipes or down
for less frequent wipes. If the
vehicle has Rainsense™, see the
following Rainsense information.

OFF : Use to turn the wipers off.

1x : For a single wipe, briefly move

the wiper lever down. For several
wipes, hold the wiper lever down.

Windshield Washer

Pull the windshield wiper lever
toward you to spray windshield
washer fluid and activate the wipers.

Rainsense™

For vehicles with Rainsense:

AUTO : Move the windshield wiper
lever to AUTO. Turn the band on the
wiper lever to adjust the sensitivity.

.

Turn the band up for more
sensitivity to moisture.

.

Turn the band down for less
sensitivity to moisture.

.

Move the windshield wiper lever
out of the AUTO position to
deactivate Rainsense.

Rear Window Wiper/Washer

Turn the end of the windshield wiper
lever to operate the rear window
wiper/washer.

OFF : Turns the system off.

INT : Intermittent wipes.

ON : Slow wipes.

Z : Push the windshield wiper

lever forward to spray washer fluid
on the rear window.

See Windshield Wiper/Washer

0 104 and Rear Window Wiper/
Washer 0 106.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

In Brief 17

Climate Controls

The heating, cooling, and ventilation for the vehicle can be controlled with
this system.

1. Driver and Passenger
Temperature Controls

2. Heated and Cooled Front
Seats (If Equipped)

3. Defrost

4. Air Delivery Mode Controls

5. Fan Control

6. SYNC (Synchronized
Temperature)

7. AUTO (Automatic Operation)

8. Recirculation

9. A/C (Air Conditioning)

10. Rear Window Defogger

11. Power

See Dual Automatic Climate Control

System 0 240 and Rear Climate
Control System 0 243 (if equipped).

Transmission

Electronic Range Select
(ERS) Mode

ERS or manual mode allows for the
selection of the range of gear
positions. Use this mode when
driving downhill to limit the top gear
and vehicle speed.

To use this feature:

1. Move the shift lever to L (Low).

2. Press the plus/minus button on
the shift lever to increase or
decrease the gear range
available.

See Manual Mode 0 269.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

18 In Brief

Vehicle Features

Steering Wheel Controls

For vehicles with audio steering
wheel controls, some audio controls
can be adjusted at the steering
wheel.

g : Press to initiate a call or to

interact with the available
Bluetooth

®

, OnStar®, or navigation

system (if equipped).

i : Press to decline an incoming

call or end a current call. Press to
mute or unmute the infotainment
system.

S or T : Press to go to the

previous or next area in the display
or to the previous or next menu.

y or z : Press to go up or down in

a list. Press to go up or down
a page.

@ : Press to select a highlighted

menu item.

C or B : Press to go to the next or

previous favorite when listening to
the radio. Press to go to the next or
previous track when listening to a
media source.

q + or q − : Press to increase or

decrease the volume.

See Steering Wheel Controls 0 103

Cruise Control

J : Press to turn cruise control on

or off. A white indicator comes on in
the instrument cluster when the
cruise is turned on.

RES+ : If there is a set speed in
memory, press briefly to resume that
speed or press and hold to
accelerate. If cruise control is
already active, use to increase
vehicle speed.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

In Brief 19

SET− : Press the control down

briefly to set the speed and activate
cruise control. If cruise control is
already active, use to decrease
vehicle speed.

* : Press to disengage cruise

control without erasing the set
speed from memory.

See Cruise Control 0 275 or
Adaptive Cruise Control 0 277,
if equipped.

Driver Information
Center (DIC)

The DIC display is in the instrument
cluster. It shows the status of many
vehicle systems.

y or z : Press to move up or

down in a list.

S or T : Press S to open

application menus on the left. Press

T to open interaction menus on the

right.

V : Press to open a menu or select

a menu item. Press and hold to
reset values on certain screens.

See Driver Information Center (DIC)

(Base Level) 0 128 or Driver
Information Center (DIC)
(Uplevel) 0 131.

Forward Collision Alert
(FCA) System

If equipped, FCA may help avoid or
reduce the harm caused by
front-end crashes. FCA provides a

green indicator,

V, when a vehicle

is detected ahead. This indicator
displays amber if you follow a
vehicle much too closely. When
approaching a vehicle ahead too
quickly, FCA provides a flashing red
alert on the windshield and rapidly
beeps or pulses the driver seat.

See Forward Collision Alert (FCA)
System 0 290.

Front Automatic Braking
(FAB) System

If the vehicle has Adaptive Cruise
Control (ACC), it also has FAB,
which includes Intelligent Brake
Assist (IBA). When the system
detects a vehicle ahead in your path
that is traveling in the same
direction that you may be about to
crash into, it can provide a boost to
braking or automatically brake the

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

20 In Brief

vehicle. This can help avoid or
lessen the severity of crashes when
driving in a forward gear.

See Front Automatic Braking (FAB)
System 0 292.

Lane Keep Assist (LKA)

If equipped, LKA may help avoid
crashes due to unintentional lane
departures. It may assist by gently
turning the steering wheel if the
vehicle approaches a detected lane
marking without using a turn signal
in that direction. It may also provide
a Lane Departure Warning (LDW)
alert as the lane marking is crossed.
The system will not assist or alert if
it detects that you are actively
steering. Override LKA by turning
the steering wheel. LKA uses a
camera to detect lane markings
between 60 km/h (37 mph) and
180 km/h (112 mph).

See Lane Departure Warning (LDW)

0 296 and Lane Keep Assist
(LKA) 0 296.

Lane Change Alert (LCA)

If equipped, the LCA system is a
lane-changing aid that assists
drivers with avoiding lane change
crashes that occur with moving
vehicles in the side blind zone (or
spot) areas or with vehicles rapidly
approaching these areas from
behind. The LCA warning display
will light up in the corresponding
outside side mirror and will flash if
the turn signal is on. The Side Blind
Zone Alert (SBZA) system is
included as part of the LCA system.

See Side Blind Zone Alert (SBZA)

0 293 and Lane Change Alert
(LCA) 0 294.

Surround Vision

If equipped, views around the
vehicle display on the center stack
to aid with parking and low-speed
maneuvers.

See “Surround Vision” under

Assistance Systems for Parking or
Backing 0 285.

Front Vision Camera

If equipped, a view of the area in
front of the vehicle displays on the
center stack to aid with parking and
low-speed maneuvers.

See “Front Vision Camera” under

Assistance Systems for Parking or
Backing 0 285.

Rear Vision
Camera (RVC)

If equipped, RVC displays a view of
the area behind the vehicle on the
infotainment display when the
vehicle is shifted into R (Reverse) to
aid with parking and low-speed
backing maneuvers.

See Assistance Systems for Parking
or Backing 0 285.

Rear Cross Traffic Alert
(RCTA) System

If equipped, the RCTA system uses
a triangle with an arrow displayed
on the RVC screen to warn of traffic
behind your vehicle that may cross

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

In Brief 21

your vehicle's path while in
R (Reverse). In addition, beeps will
sound, or the driver seat will pulse.

See Assistance Systems for Parking
or Backing 0 285.

Parking Assist

If equipped, Rear Parking
Assist (RPA) uses sensors on the
rear bumper to assist with parking
and avoiding objects while in
R (Reverse). It operates at speeds
less than 8 km/h (5 mph). RPA may
display a warning triangle on the
Rear Vision Camera screen and a
graphic on the instrument cluster to
provide the object distance. In
addition, multiple beeps or seat
pulses may occur if very close to an
object.

The vehicle may also have the Front
Parking Assist system.

See Assistance Systems for Parking
or Backing 0 285.

Automatic Parking
Assist (APA)

If equipped, the APA system helps
to search for and maneuver the
vehicle into parallel or perpendicular
parking spots using automatic
steering, DIC displays, and beeps.
When the vehicle speed is below

30 km/h (18 mph), press

O to

enable the system.

See “Automatic Parking Assist
(APA)” under Assistance Systems
for Parking or Backing 0 285.

Power Outlets

The vehicle has four 12-volt
accessory power outlets, which can
be used to plug in electrical
equipment, such as a cell phone or
MP3 player.

There are power outlets:

.

On the center floor console.

.

Inside the center floor console.

.

On the rear of the center floor
console.

.

In the rear cargo area.

To use the outlet, remove the cover.

See Power Outlets 0 108.

Universal Remote System

This system provides a way to
replace up to three remote control
transmitters used to activate
devices such as garage door
openers, security systems, and
home automation devices.

Read the instructions completely
before attempting to program the
Universal Remote system. Because
of the steps involved, it may be

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

22 In Brief

helpful to have another person
available to assist with programming
the Universal Remote system.

See Universal Remote
System 0 151.

Sunroof

1. Sunroof Switch

2. Sunshade Switch

If equipped, the sunroof only
operates when the ignition is in
ACC/ACCESSORY or ON/RUN,
or when Retained Accessory Power
(RAP) is active. See Retained
Accessory Power (RAP) 0 264.

Vent : From the closed position,
press the rear of the switch (1) to
vent the sunroof.

Open/Close : To open the sunroof,
press and hold the rear of the
switch (1) until the sunroof reaches
the desired position. Press and hold
the front of the switch (1) to close it.

Express-Open/Express-Close : To
express-open the sunroof, fully
press and release the rear of
switch (1). Press the switch again to
stop it. To express-close the
sunroof, fully press and release the
front of switch (1). Press the switch
again to stop it.

Sunshade : To open or close the
sunshade, press and hold the
switch (2).

When the sunroof is opened, an air
deflector will automatically raise.
The air deflector will retract when
the sunroof is closed.

If an object is in the path of the
sunroof while it is closing, the
automatic reversal system will
detect the object and stop the
sunroof.

See Sunroof 0 47.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

In Brief 23

Performance and
Maintenance

Traction Control/
Electronic Stability
Control

The Traction Control System (TCS)
limits wheel spin. The system is on
when the vehicle is started.

The StabiliTrak system assists with
directional control of the vehicle in
difficult driving conditions. The
system is on when the vehicle is
started.

.

To turn off TCS, press and
release

g on the center console.

The traction off light

i

illuminates in the instrument
cluster.

.

Press and release

g again to

turn TCS back on. The traction
off light

i in the instrument

cluster will turn off.

.

To turn off both TCS and
StabiliTrak, press and hold

g

until the traction off light i and
StabiliTrak OFF light

g

illuminate in the instrument
cluster.

.

Press and release

g again to

turn on both systems. The
traction off light

i and

StabiliTrak OFF light

g in the

instrument cluster will turn off.

See Traction Control/Electronic
Stability Control 0 273.

Tire Pressure Monitor

This vehicle may have a Tire
Pressure Monitor System (TPMS).

The low tire pressure warning light
alerts to a significant loss in
pressure of one of the vehicle's

tires. If the warning light comes on,
stop as soon as possible and inflate
the tires to the recommended
pressure shown on the Tire and
Loading Information label. See
Vehicle Load Limits 0 255. The
warning light will remain on until the
tire pressure is corrected.

The low tire pressure warning light
may come on in cool weather when
the vehicle is first started, and then
turn off as the vehicle is driven. This
may be an early indicator that the
tire pressures are getting low and
the tires need to be inflated to the
proper pressure.

The TPMS does not replace normal
monthly tire maintenance. Maintain
the correct tire pressures.

See Tire Pressure Monitor
System 0 347.

Engine Oil Life System

The engine oil life system calculates
engine oil life based on vehicle use
and displays the CHANGE ENGINE
OIL SOON message when it is time
to change the engine oil and filter.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

24 In Brief

The oil life system should be reset
to 100% only following an oil
change.

Resetting the Oil Life System

1. Using the DIC controls on the
right side of the steering wheel,
display REMAINING OIL LIFE
on the DIC. See Driver

Information Center (DIC) (Base
Level) 0 128 or Driver
Information Center (DIC)
(Uplevel) 0 131. When

remaining oil life is low, the
CHANGE ENGINE OIL SOON
message will appear on the
display. See Engine Oil
Messages 0 139.

2. Press

V on the DIC controls

and hold down for a few
seconds to clear the CHANGE
ENGINE OIL SOON message
and reset the oil life at 100%.

Be careful not to reset the oil
life display accidentally at any
time other than after the oil is
changed. It cannot be reset
accurately until the next oil
change.

See Engine Oil Life System 0 316.

Driving for Better Fuel
Economy

Driving habits can affect fuel
mileage. Here are some driving tips
to get the best fuel economy
possible.

.

Avoid fast starts and accelerate
smoothly.

.

Brake gradually and avoid
abrupt stops.

.

Avoid idling the engine for long
periods of time.

.

When road and weather
conditions are appropriate, use
cruise control.

.

Always follow posted speed
limits or drive more slowly when
conditions require.

.

Keep vehicle tires properly
inflated.

.

Combine several trips into a
single trip.

.

Replace the vehicle's tires with
the same TPC Spec number
molded into the tire's sidewall
near the size.

.

Follow recommended scheduled
maintenance.

Roadside Assistance
Program

U.S.: 1-800-252-1112

TTY Users (U.S. Only):
1-888-889-2438

Canada: 1-800-268-6800

New Buick owners are automatically
enrolled in the Roadside Assistance
Program.

See Roadside Assistance
Program 0 400.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Keys, Doors, and Windows 25

Keys, Doors, and
Windows

Keys and Locks

Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Remote Keyless Entry (RKE)

System . . . . . . . . . . . . . . . . . . . . . . . 26

Remote Keyless Entry (RKE)

System Operation . . . . . . . . . . . . 26

Remote Vehicle Start . . . . . . . . . . 32

Door Locks . . . . . . . . . . . . . . . . . . . . 33

Power Door Locks . . . . . . . . . . . . . 34

Delayed Locking . . . . . . . . . . . . . . . 34

Automatic Door Locks . . . . . . . . . 35

Lockout Protection . . . . . . . . . . . . . 35

Safety Locks . . . . . . . . . . . . . . . . . . . 35

Doors

Liftgate . . . . . . . . . . . . . . . . . . . . . . . . 36

Vehicle Security

Vehicle Security . . . . . . . . . . . . . . . . 41

Vehicle Alarm System . . . . . . . . . 41

Immobilizer . . . . . . . . . . . . . . . . . . . . 42

Immobilizer Operation . . . . . . . . . 42

Exterior Mirrors

Convex Mirrors . . . . . . . . . . . . . . . . 43

Power Mirrors . . . . . . . . . . . . . . . . . . 43

Folding Mirrors . . . . . . . . . . . . . . . . . 44

Heated Mirrors . . . . . . . . . . . . . . . . . 44

Automatic Dimming Mirror . . . . . 44

Reverse Tilt Mirrors . . . . . . . . . . . . 44

Interior Mirrors

Interior Rearview Mirrors . . . . . . . 44

Automatic Dimming Rearview

Mirror . . . . . . . . . . . . . . . . . . . . . . . . . 44

Windows

Windows . . . . . . . . . . . . . . . . . . . . . . . 45

Power Windows . . . . . . . . . . . . . . . 45

Sun Visors . . . . . . . . . . . . . . . . . . . . . 47

Roof

Sunroof . . . . . . . . . . . . . . . . . . . . . . . . 47

Keys and Locks

Keys

{

Warning

Leaving children in a vehicle with
a Remote Keyless Entry (RKE)
transmitter is dangerous and
children or others could be
seriously injured or killed. They
could operate the power windows
or other controls or make the
vehicle move. The windows will
function with the RKE transmitter
in the vehicle, and children or
others could be caught in the path
of a closing window. Do not leave
children in a vehicle with an RKE
transmitter.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

26 Keys, Doors, and Windows

The key that is part of the Remote
Keyless Entry (RKE) transmitter can
be used to open the driver door.

Press the button on the RKE
transmitter to remove the key.

If it becomes difficult to turn the key,
inspect the key blade for debris.
Periodically clean with a brush
or pick.

See your dealer if a new key is
needed.

If locked out of the vehicle, see

Roadside Assistance
Program 0 400.

With an active OnStar subscription,
an OnStar Advisor may remotely
unlock the vehicle. See OnStar
Overview 0 410.

Remote Keyless Entry
(RKE) System

See Radio Frequency
Statement 0 406.

If there is a decrease in the Remote
Keyless Entry (RKE) operating
range:

.

Check the distance. The
transmitter may be too far from
the vehicle.

.

Check the location. Other
vehicles or objects may be
blocking the signal.

.

Check the transmitter's battery.
See “Battery Replacement” later
in this section.

.

If the transmitter is still not
working correctly, see your
dealer or a qualified technician
for service.

Remote Keyless Entry
(RKE) System Operation

The RKE transmitter may work up to
60 m (197 ft) away from the vehicle.

Other conditions can affect the
performance of the transmitter. See

Remote Keyless Entry (RKE)
System 0 26.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Keys, Doors, and Windows 27

The following may be available:

Q (Lock) : Press to lock all doors.

The turn signal indicators may flash
and/or the horn may sound to
indicate locking. See Vehicle
Personalization 0 146. If a

passenger door is open when

Q is

pressed, all doors lock. If the driver
door is open when

Q is pressed, all

doors lock except the driver door.
These settings can be modified.
See Vehicle Personalization 0 146.

Pressing

Q may also arm the alarm

system. See Vehicle Alarm
System 0 41.

K (Unlock) : Press to unlock the

driver door or all doors. See Vehicle
Personalization 0 146. The turn
signal indicators may flash to
indicate unlocking has occurred.
See Vehicle Personalization 0 146.

Pressing

K may also disarm the

alarm system. See Vehicle Alarm
System 0 41.

For vehicles with the manual
liftgate, press

K twice within

five seconds to unlock the liftgate.

b(Power Liftgate Control) :

If equipped, press twice quickly to
open or close the liftgate. Press and
release once to stop the liftgate
from moving.

7 (Vehicle Locator/Panic

Alarm) : Press and release one
time to initiate vehicle locator. The
exterior lamps flash and the horn
chirps three times. Press and hold

7 for at least three seconds to

sound the panic alarm. The horn
sounds and the turn signals flash

until

7 is pressed again or the key

is placed in the ignition and turned
to ON/RUN.

/ (Remote Start) : Press and

release

Q and then immediately

press and hold

/ for at least

four seconds to start the engine
from outside the vehicle using the
RKE transmitter.

Keyless Access Operation

The Keyless Access system lets
you lock and unlock the doors and
access the liftgate without removing
the RKE transmitter from your
pocket, purse, briefcase, etc. The
RKE transmitter should be within
1 m (3 ft) of the door or liftgate being
opened. If equipped, there will be
buttons on the outside front door
handles.

Keyless Access can be
programmed to unlock all doors on
the first lock/unlock press from the
driver door. See Vehicle
Personalization 0 146.

Keyless Unlocking/Locking from
the Driver Door

When the doors are locked and the
RKE transmitter is within 1 m (3 ft)
of the driver door handle, pressing

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

28 Keys, Doors, and Windows

the lock/unlock button on the driver
door handle will unlock the driver
door. If the lock/unlock button is
pressed again within five seconds,
all passenger doors will unlock. Pull
the door handle to unlatch the door.

Driver Side Shown, Passenger

Side Similar

Pressing the lock/unlock button will
cause all doors to lock if any of the
following occur:

.

It has been more than
five seconds since the first lock/
unlock button press.

.

Two lock/unlock button presses
were used to unlock all doors.

.

Any vehicle door has opened
and all doors are now closed.

Keyless Unlocking/Locking from
the Passenger Doors

When the doors are locked and the
RKE transmitter is within 1 m (3 ft)
of the passenger door handle,
pressing the lock/unlock button on
the passenger door handle will
unlock all doors.

Pressing the lock/unlock button will
cause all doors to lock if any of the
following occur:

.

The lock/unlock button was used
to unlock all doors.

.

Any vehicle door has opened
and all doors are now closed.

Passive Locking

If equipped with Keyless Access,
the vehicle will lock several seconds
after all doors are closed if the
vehicle is off and at least one
transmitter has been removed or
none remain in the vehicle.

If other electronic devices interfere
with the RKE transmitter signal, the
vehicle may not detect the RKE

transmitter inside the vehicle.
If passive locking is enabled, the
doors may lock with the RKE
transmitter inside the vehicle. Do
not leave the RKE transmitter in an
unattended vehicle.

Temporary Disable of the Passive
Locking Feature

Temporarily disable passive locking
by pressing and holding

K on the

interior door switch with a door open
for at least four seconds, or until
three chimes are heard. Passive
locking will then remain disabled

until

Q on the interior door is

pressed, or until the vehicle is
turned on.

To customize the doors to
automatically lock when exiting the
vehicle, see Vehicle
Personalization 0 146.

Remote Left In Vehicle Alert

When the vehicle is turned off and a
remote is left in the vehicle, the horn
will chirp three times after all doors
are closed. To turn on or off see
Vehicle Personalization 0 146.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Keys, Doors, and Windows 29

Keyless Liftgate Opening

When the doors are locked, press
the touch pad to open the liftgate if
the RKE transmitter is within
1 m (3 ft).

Programming Transmitters to
the Vehicle

Only RKE transmitters programmed
to the vehicle will work. If a
transmitter is lost or stolen, a
replacement can be purchased and
programmed through your dealer.
The vehicle can be reprogrammed
so that lost or stolen transmitters no
longer work. Any remaining
transmitters will need to be
reprogrammed. Each vehicle can
have up to eight transmitters
matched to it.

Programming with a Recognized
Transmitter

A new transmitter can be
programmed to the vehicle when
there is one recognized transmitter.
To program, the vehicle must be off
and all of the transmitters, both
currently recognized and new, must
be with you.

1. Place the recognized
transmitter(s) in the front
cupholder.

2. Insert the vehicle key of the
new transmitter into the key
lock cylinder on the outside of
the driver door and turn the key
to the unlock position five times
within 10 seconds.

The Driver Information Center
(DIC) displays READY FOR
REMOTE #2, 3, 4 or 5.

3. Place the new transmitter in
the front cupholder

4. Press the ENGINE START/
STOP button. When the
transmitter is learned, the DIC
will show that it is ready to
program the next transmitter.

5. Remove the transmitter from
the transmitter pocket and

press

K.

To program additional
transmitters, repeat Steps 3–5.

When all additional transmitters
are programmed, press and
hold the ENGINE START/
STOP button for 12 seconds to
exit programming mode.

Programming without a
Recognized Transmitter

If there are no currently recognized
transmitters available, follow this
procedure to program up to eight
transmitters. This feature is not
available in Canada. This procedure
will take approximately 30 minutes
to complete. The vehicle must be off
and all of the transmitters to be
programmed must be with you.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

30 Keys, Doors, and Windows

1. Insert the vehicle key of the
transmitter into the key lock
cylinder on the outside of the
driver door and turn the key to
the unlock position five times
within 10 seconds.

The Driver Information Center
(DIC) displays REMOTE
LEARN PENDING,
PLEASE WAIT.

2. Wait for 10 minutes until the
DIC displays PRESS ENGINE
START BUTTON TO LEARN
and then press the ENGINE
START/STOP button.

The DIC displays will again
show REMOTE LEARN
PENDING, PLEASE WAIT.

3. Repeat Step 2 two additional
times. After the third time, all
previously known transmitters
will no longer work with the
vehicle. Remaining transmitters
can be relearned during the
next steps.

The DIC display should now
show READY FOR REMOTE
# 1.

4. Place the new transmitter into
the front cupholder.

5. Press the ENGINE START/
STOP button. When the
transmitter is learned the DIC
will show that it is ready to
program the next transmitter.

6. Remove the transmitter from
the cupholder and press

K.

To program additional
transmitters, repeat Steps 4–6.

When all additional transmitters
are programmed, press and
hold the ENGINE START/
STOP button for 12 seconds to
exit programming mode.

Starting the Vehicle with a Low
Transmitter Battery

If the transmitter battery is weak or if
there is interference with the signal,
the DIC may display NO REMOTE
DETECTED or NO REMOTE KEY
WAS DETECTED PLACE KEY IN
TRANSMITTER POCKET THEN
START YOUR VEHICLE. See Key
and Lock Messages 0 140.

To start the vehicle:

1. Place the transmitter in the
front cupholder.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Keys, Doors, and Windows 31

2. With the vehicle in P (Park) or
N (Neutral), press the brake
pedal and the ENGINE START/
STOP button.

Replace the transmitter battery
as soon as possible.

Battery Replacement

Replace the battery if the REPLACE
BATTERY IN REMOTE KEY
message displays in the DIC. See
Key and Lock Messages 0 140.

Caution

When replacing the battery, do
not touch any of the circuitry on
the transmitter. Static from your
body could damage the
transmitter.

The battery is not rechargeable. To
replace the battery:

1. Press the button on the
transmitter to access the key.

2. Separate the two halves of the
transmitter using a flat tool
inserted into the bottom of the
transmitter.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

32 Keys, Doors, and Windows

3. Remove the battery by pushing
on the battery and sliding it
toward the bottom of the
transmitter.

4. Insert the new battery, positive
side facing the back cover.
Push the battery down until it is
held in place. Replace with a
CR2032 or equivalent battery.

5. Snap the battery cover back on
to the transmitter.

Remote Vehicle Start

If equipped with the remote start
feature, the climate control system
will come on when the vehicle is
started remotely depending on the
outside temperature.

The rear defog and heated and
cooled seats, if equipped, may also
come on. See Heated and Cooled

Front Seats 0 55 and Vehicle
Personalization 0 146.

Laws in some communities may
restrict the use of remote starters.
Check local regulations for any
requirements on remote starting of
vehicles.

Do not use remote start if the
vehicle is low on fuel.

The vehicle cannot be remote
started if:

.

The transmitter is in the vehicle.

.

The hood is not closed.

.

There is an emission control
system malfunction and the
malfunction indicator lamp is on.

The engine will turn off during a
remote vehicle start if:

.

The coolant temperature gets
too high.

.

The oil pressure gets low.

The RKE transmitter range may be
reduced while the vehicle is running.

Other conditions can affect the
performance of the transmitter. See

Remote Keyless Entry (RKE)
System 0 26 or Vehicle
Personalization 0 146.

Starting the Engine Using Remote
Start

1. Press and release

Q.

2. Immediately press and hold

/

until the turn signal lamps flash
or for at least four seconds.

When the vehicle starts, the
parking lamps will turn on. The
doors will be locked and the
climate control system may
come on.

The engine will continue to run
for 10 minutes. After
30 seconds, repeat
Steps 1 and 2 if a 10-minute
time extension is desired.

Place the ignition in ON/RUN/
START to operate the vehicle.

Extending Engine Run Time

The engine run time can be
extended by 10 minutes, for a total
of 20 minutes, if during the first
10 minutes Steps 1 and 2 are
repeated while the engine is still
running. An extension can be
requested, 30 seconds after
starting.

A maximum of two remote starts,
or a single start with an extension,
is allowed between ignition cycles.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Keys, Doors, and Windows 33

The vehicle's ignition must be
turned on and then back off to use
remote start again.

Canceling a Remote Start

To cancel a remote start, do one of
the following:

.

Press and hold

/ until the

parking lamps turn off.

.

Turn on the hazard warning
flashers.

.

Turn the ignition on and then off.

Door Locks

{

Warning

Unlocked doors can be
dangerous.

.

Passengers, especially
children, can easily open
the doors and fall out of a
moving vehicle. When a
door is locked, the handle
will not open it. The chance
of being thrown out of the
vehicle in a crash is

(Continued)

Warning (Continue d)

increased if the doors are
not locked. So, all
passengers should wear
safety belts properly and the
doors should be locked
whenever the vehicle is
driven.

.

Young children who get into
unlocked vehicles may be
unable to get out. A child
can be overcome by
extreme heat and can suffer
permanent injuries or even
death from heat stroke.
Always lock the vehicle
whenever leaving it.

.

Outsiders can easily enter
through an unlocked door
when you slow down or stop
the vehicle. Locking the
doors can help prevent this
from happening.

To lock or unlock the doors from
outside the vehicle:

.

Press

Q or K on the Remote

Keyless Entry (RKE) transmitter.

.

Use the key in the driver door.

To lock or unlock the doors from
inside the vehicle:

.

Press

Q or K on the power door

lock switch.

.

Pushing down the manual lock
knob on the driver door will lock
all doors. Pushing down the
manual lock knob on a
passenger door will lock only
that door.

.

Pulling an interior door handle
will unlock the door. Pulling the
door handle again unlatches it.

Keyless Access

If equipped, the RKE transmitter
must be within 1 m (3 ft) of the door
being opened. Press the button on
the door handle to open. See
“Keyless Access Operation” in

Remote Keyless Entry (RKE)
System Operation 0 26.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

34 Keys, Doors, and Windows

Key Cylinder Access

To access the key cylinder:

1. Pull the door handle to the
open position.

2. Insert the key into the slot on
the bottom of the cap and pry
outward.

3. Move the cap rearward and
remove.

Replace the cap by snapping on
the tabs.

Power Door Locks

Press Q or K on the Remote
Keyless Entry (RKE) transmitter.
See Remote Keyless Entry (RKE)
System Operation 0 26.

Q (Lock) : Press to lock the doors.
K (Unlock) : Press to unlock the

doors.

Delayed Locking

This feature delays the actual
locking of the doors until
five seconds after all doors are
closed.

Delayed locking can only be turned
on when the Unlocked Door Anti
Lock Out feature has been
turned off.

When

Q is pressed on the power

door lock switch with the door open,
a chime will sound three times
indicating that delayed locking is
active.

The doors will then lock
automatically five seconds after all
doors are closed. If a door is
reopened before five seconds have
elapsed, the five-second timer will
reset once all the doors are closed
again.

Press

Q on the door lock switch

again, or press

Q on the RKE

transmitter, to override this feature
and lock the doors immediately.

Delayed locking can be
programmed through the Driver
Information Center (DIC). See
Vehicle Personalization 0 146.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Keys, Doors, and Windows 35

Automatic Door Locks

The doors will lock automatically
when all doors are closed, the
ignition is on, and the vehicle is
shifted out of P (Park).

To unlock the doors:

.

Press

K on the power door lock

switch.

.

Shift the transmission into
P (Park).

Automatic door locking cannot be
disabled. Automatic door unlocking
can be programmed. See Vehicle
Personalization 0 146.

Lockout Protection

If the vehicle is in ACC/
ACCESSORY or ON/RUN/START
and the power door lock switch is
pressed with the driver door open,
all the doors will lock and only the
driver door will unlock.

If the vehicle is off and locking is
requested while a door is open,
when all doors are closed the
vehicle will check for RKE
transmitters inside. If an RKE

transmitter is detected and the
number of RKE transmitters inside
has not reduced, the driver door will
unlock and the horn will chirp three
times.

Lockout Protection can be manually
overridden with the driver door open

by pressing and holding

Q on the

power door lock switch.

Unlocked Door Anti Lockout

If Unlocked Door Anti Lockout is
turned on and the vehicle is off, the
driver door is open, and locking is
requested, all the doors will lock and
only the driver door will unlock. The
Unlocked Door Anti Lockout feature
can be turned on or off using the
vehicle personalization menus. See
Vehicle Personalization 0 146.

Safety Locks

The rear door safety locks prevent
passengers from opening the rear
doors from inside the vehicle.

Press

Z { to activate the rear door

safety locks. The indicator light
comes on when activated.

Press

Z { again to deactivate the

safety locks.

If an inside rear door handle is
being pulled at the same time a
safety lock is deactivated, only that
door will remain locked and the
indicator light may flash. Release

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

36 Keys, Doors, and Windows

the handle, then press the safety
lock twice to deactivate the safety
locks.

The rear window lockout is also
enabled. See Power Windows 0 45.

Doors

Liftgate

{

Warning

Exhaust gases can enter the
vehicle if it is driven with the
liftgate or trunk/hatch open,
or with any objects that pass
through the seal between the
body and the trunk/hatch or
liftgate. Engine exhaust contains
carbon monoxide (CO) which
cannot be seen or smelled. It can
cause unconsciousness and even
death.

If the vehicle must be driven with
the liftgate or trunk/hatch open:

.

Close all of the windows.

.

Fully open the air outlets on
or under the instrument
panel.

.

Adjust the climate control
system to a setting that
brings in only outside air

(Continued)

Warning (Continue d)

and set the fan speed to the
highest setting. See
“Climate Control Systems”
in the Index.

.

If the vehicle is equipped
with a power liftgate, disable
the power liftgate function.

See Engine Exhaust 0 266.

Caution

To avoid damage to the liftgate or
liftgate glass, make sure the area
above and behind the liftgate is
clear before opening it.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Keys, Doors, and Windows 37

Manual Liftgate

To open the liftgate, press K on the
power door lock switch or press

K

on the RKE transmitter twice to
unlock all doors. Press the touch
pad on the underside of the liftgate
handle and lift up.

Use the pull cup to lower and close
the liftgate. Do not press the touch
pad while closing the liftgate. This
will cause the liftgate to be
unlatched.

If equipped with Keyless Access,
the liftgate can be opened when
locked if the RKE transmitter is

within 1 m (3 ft) of the touch pad.
See Remote Keyless Entry (RKE)
System Operation 0 26.

The liftgate has an electric latch.
If the battery is disconnected or has
low voltage, the liftgate will not
open. The liftgate will resume
operation when the battery is
reconnected and charged.

Power Liftgate Operation

{

Warning

You or others could be injured if
caught in the path of the power
liftgate. Make sure there is no one
in the way of the liftgate as it is
opening and closing.

Caution

Driving with an open and
unsecured liftgate may result in
damage to the power liftgate
components.

If equipped with a power liftgate, the
switch is on the driver door. The
vehicle must be in P (Park).

The modes are:

.

MAX: Opens to maximum
height.

.

3/4: Opens to a reduced height
that can be set from 3/4 to fully
open. Use to prevent the liftgate
from opening into overhead
obstructions such as a garage
door or roof-mounted cargo. The
liftgate can be manually opened
all the way.

.

OFF: Opens manually only.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

38 Keys, Doors, and Windows

To power open or close the liftgate,
select MAX or 3/4 mode.

.

Press

b twice quickly on the

RKE transmitter until the liftgate
moves.

.

Press

8 on the driver door.

.

Press the touch pad on the
outside liftgate handle after
unlocking all doors. If equipped
with Keyless Access, the RKE
transmitter must be within
1 m (3 ft).

.

Press

l on the bottom of the

liftgate next to the pull cup to
close.

Press any liftgate button or the
touch pad while the liftgate is
moving to stop it. Pressing again
restarts the operation in the reverse
direction. The touch pad on the
liftgate handle cannot be used to
close the liftgate.

Caution

Manually forcing the liftgate to
open or close during a power
cycle can damage the vehicle.
Allow the power cycle to
complete.

The power liftgate may be
temporarily disabled under extreme
low temperatures, or after repeated
power cycling over a short period of
time. If this occurs, the liftgate can
still be operated manually.

If the vehicle is shifted out of
P (Park) while the power function is
in progress, the liftgate will continue
to completion. If the vehicle is
accelerated before the liftgate has
completed moving, the liftgate may
stop or reverse direction. Check for

DIC messages and make sure the
liftgate is closed and latched before
driving.

Falling Liftgate Detection

The power liftgate will automatically
close if the support strut has lost
pressure. See your dealer for
service before using the power
liftgate.

Obstacle Detection Features

If the liftgate encounters an obstacle
during a power open or close cycle,
a warning chime will sound and the
liftgate will automatically reverse
direction and move a short distance
away from the obstacle. After
removing the obstruction, the power
liftgate operation can be used again.
If the liftgate encounters multiple
obstacles on the same power cycle,
the power function will deactivate.
After removing the obstructions,
manually close the liftgate which will
allow normal power operation
functions to resume.

If the vehicle is locked while the
liftgate is closing, and an obstacle is
encountered that prevents the

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Keys, Doors, and Windows 39

liftgate from completely closing, the
horn will sound as an alert that the
liftgate did not close.

Pinch sensors are on the side
edges of the liftgate. If an object is
caught between the liftgate and the
vehicle and presses against this
sensor, the liftgate will reverse
direction and open fully. The liftgate
will remain open until it is activated
again or closed manually.

Setting the 3/4 Mode

To change the position the liftgate
stops at when opening:

1. Select MAX or 3/4 mode and
power open the liftgate.

2. Stop the liftgate movement at
the desired height by pressing
any liftgate switch. Manually
adjust the liftgate position if
needed.

3. Press and hold

l next to the

pull cup on the outside of the
liftgate until the turn signals
flash and a beep sounds. This
indicates the setting has been
recorded.

The liftgate cannot be set below a
minimum programmable height.
If there is no light flash or sound,
then the height adjustment may be
too low.

Manual Operation

Select OFF to manually operate the
liftgate. See “Manual Liftgate” at the
beginning of this section.

Caution

Attempting to move the liftgate
too quickly and with excessive
force may result in damage to the
vehicle.

Operate the liftgate manually with a
smooth motion and moderate
speed. The system includes a
feature which limits the manual
closing speed to protect the
components.

Hands-Free Operation

If equipped, the liftgate may be
operated with a kicking motion
under the rear bumper.

The liftgate will not operate if the
RKE transmitter is not within
1 m (3 ft).

The hands-free feature will not work
while the liftgate is moving. To stop
the liftgate while in motion use one
of the liftgate switches.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

40 Keys, Doors, and Windows

Length of Kick Zone

To operate, kick your foot straight up
in one swift motion under the left
corner of the rear bumper, then pull
it back.

Caution

Splashing water may cause the
liftgate to open. Keep the RKE
transmitter away from the rear
bumper detection area or turn the
liftgate mode to OFF when
cleaning or working near the rear
bumper to avoid accidental
opening.

.

Do not sweep your foot side
to side.

.

Do not keep your foot under the
bumper; the liftgate will not
activate.

.

Do not touch the liftgate until it
has stopped moving.

.

This feature may temporarily be
disabled under some conditions.
If the liftgate does not respond to
the kick, open or close the
liftgate by another method or
start the vehicle. The feature will
be re-enabled.

When closing the liftgate using this
feature, there will be a short delay.
The rear lights will flash and a
chime will sound. Step away from
the liftgate before it starts moving.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Keys, Doors, and Windows 41

Vehicle Security

This vehicle has theft-deterrent
features; however, they do not make
the vehicle impossible to steal.

Vehicle Alarm System

This vehicle has an anti-theft alarm
system.

The indicator light, on the
instrument panel near the
windshield, indicates the status of
the system:

Off : Alarm system is disarmed.

On Solid : Vehicle is secured

during the delay to arm the system.

Fast Flash : Vehicle is unsecured.
A door, the hood, or the liftgate
is open.

Slow Flash : Alarm system is
armed.

Arming the Alarm System

1. Turn off the vehicle.

2. Lock the vehicle in one of
three ways:

.

Use the RKE transmitter.

.

Use the Keyless Access
system.

.

With a door open, press the
inside

Q.

3. After 30 seconds the alarm
system will arm, and the
indicator light will begin to
slowly flash indicating the
alarm system is operating.

Pressing

Q on the RKE

transmitter a second time will
bypass the 30-second delay
and immediately arm the alarm
system.

The vehicle alarm system will not
arm if the doors are locked with
the key.

If the driver door is opened without
first unlocking with the RKE
transmitter, the horn will chirp and
the lights will flash to indicate
pre-alarm. If the vehicle is not
started, or the door is not unlocked

by pressing

K on the RKE

transmitter during the 10-second
pre-alarm, the alarm will be
activated.

The aIarm will also be activated if a
door, the hood, or the liftgate is
opened without first disarming the
system. When the alarm is
activated, the turn signals will flash
and the horn will sound for about
30 seconds. The alarm system will
then re-arm to monitor for the next
unauthorized event.

Disarming the Alarm System

To disarm the alarm system or turn
off the alarm if it has been activated:

.

Press

K on the RKE transmitter.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

42 Keys, Doors, and Windows

.

Unlock the vehicle using the
Keyless Access system.

.

Start the vehicle.

To avoid setting off the alarm by
accident:

.

Lock the vehicle after all
occupants have exited.

.

Always unlock the vehicle with
the RKE transmitter, or use the
Keyless Access system.

Unlocking the driver door with the
key will not disarm the system or
turn off the alarm.

How to Detect a Tamper
Condition

If K is pressed on the RKE
transmitter and the horn chirps and
the lights flash three times, an alarm
occurred previously while the alarm
system was armed.

If the alarm has been activated, a
message will appear on the DIC.
See Security Messages 0 143.

Immobilizer

See Radio Frequency
Statement 0 406.

Immobilizer Operation

This vehicle has a passive
theft-deterrent system.

The system does not have to be
manually armed or disarmed.

The vehicle is automatically
immobilized when the transmitter
leaves the vehicle.

The immobilization system is
disarmed when the ignition button is
pushed in and a valid transmitter is
found in the vehicle.

The security light in the instrument
cluster comes on when there is a
problem with arming or disarming
the theft-deterrent system.

The system has one or more
transmitters matched to an
immobilizer control unit in your
vehicle. Only a correctly matched
transmitter will start the vehicle.
If the transmitter is ever damaged,
you may not be able to start your
vehicle.

When trying to start the vehicle, the
security light comes on briefly when
the ignition is turned on.

If the engine does not start and the
security light stays on, there is a
problem with the system. Turn the
vehicle off and try again.

If the RKE transmitter appears to be
undamaged, try another transmitter.
Or, you may try placing the
transmitter in the transmitter pocket
in the front cupholder. See “Starting
the Vehicle with a Low Transmitter
Battery” under Remote Keyless
Entry (RKE) System Operation 0 26.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Keys, Doors, and Windows 43

If the engine does not start with the
other transmitter or when the
transmitter is in the pocket in the
front cupholder, your vehicle needs
service. See your dealer who can
service the theft-deterrent system
and have a new transmitter
programmed to the vehicle.

Do not leave the transmitter or
device that disarms or deactivates
the theft-deterrent system in the
vehicle.

Exterior Mirrors

Convex Mirrors

{

Warning

A convex mirror can make things,
like other vehicles, look farther
away than they really are. If you
cut too sharply into the right lane,
you could hit a vehicle on the
right. Check the inside mirror or
glance over your shoulder before
changing lanes.

The passenger side mirror is convex
shaped. A convex mirror's surface is
curved so more can be seen from
the driver seat.

Power Mirrors

To adjust the mirrors:

1. Move the selector switch to the
L (Left) or R (Right) to choose
the driver or passenger mirror.

2. Press the arrows on the control
pad to move each mirror to the
desired position.

3. Return the selector switch to
the center position.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

44 Keys, Doors, and Windows

Turn Signal Indicator

The vehicle may also have a turn
signal indicator on the mirror. An
arrow on the mirror flashes in the
direction of the turn or lane change.

Folding Mirrors

Manual Folding Mirrors

The mirrors can be folded inward
toward the vehicle to prevent
damage when going through an
automatic car wash. Push the mirror
outward to return it to the original
position.

Heated Mirrors

K

: Press to heat the mirrors.

See “Rear Window Defogger” under

Dual Automatic Climate Control
System 0 240.

Automatic Dimming
Mirror

If equipped, the vehicle has an
automatic dimming outside mirror(s).
The mirror(s) will adjust for the glare
of headlamps behind you.

Reverse Tilt Mirrors

If equipped with memory seats, the
passenger and/or driver mirror tilts
to a preselected position when the
vehicle is in R (Reverse). This
allows the curb to be seen when
parallel parking.

The mirror(s) return to the original
position when:

.

The vehicle is shifted out of
R (Reverse), or remains in
R (Reverse) for about
30 seconds.

.

The ignition is turned off.

.

The vehicle is driven in
R (Reverse) above a set speed.

To turn this feature on or off, see
Vehicle Personalization 0 146.

Interior Mirrors

Interior Rearview Mirrors

Adjust the rearview mirror for a clear
view of the area behind the vehicle.

Do not spray glass cleaner directly
on the mirror. Use a soft towel
dampened with water.

Automatic Dimming
Rearview Mirror

If equipped, automatic dimming
reduces the glare of headlamps
from behind. The dimming feature
comes on when the vehicle is
started.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Keys, Doors, and Windows 45

Windows

{

Warning

Never leave a child, a helpless
adult, or a pet alone in a vehicle,
especially with the windows
closed in warm or hot weather.
They can be overcome by the
extreme heat and suffer
permanent injuries or even death
from heat stroke.

The vehicle aerodynamics are
designed to improve fuel economy
performance. This may result in a

pulsing sound when either rear
window is down and the front
windows are up. To reduce the
sound, open either a front window
or the sunroof, if equipped.

Power Windows

{

Warning

Children could be seriously
injured or killed if caught in the
path of a closing window. Never
leave keys in a vehicle with
children. When there are children
in the rear seat, use the window
lockout button to prevent
operation of the windows. See
Keys 0 25.

The driver door has switches that
control all windows. Each
passenger door switch only controls
that window. The power windows
work when the ignition is in ON/
RUN or ACC/ACCESSORY, or in
Retained Accessory Power (RAP).
See Retained Accessory Power
(RAP) 0 264.

Press the switch to lower the
window. Pull the switch up to
raise it.

Express-Down Windows

Windows that have the
express-down feature allow the
windows to be lowered without

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

46 Keys, Doors, and Windows

holding the switch. Press the
window switch fully and release it to
activate the express-down feature.
The express mode can be canceled
at any time by briefly pressing or
pulling the switch.

Express-Up Window

If equipped, the driver window
express-up feature allows the
window to be raised without holding
the switch. Pull the window switch
up fully and release it to activate the
express-up feature. The express-up
feature can be canceled at any time
by briefly pressing or pulling the
switch.

Programming the Power
Windows

If the battery on the vehicle has
been recharged or disconnected,
or is not working, the driver power
window may need to be
reprogrammed for the express-up
feature to work.

To reprogram the power windows:

1. Close all doors.

2. Place the ignition in ACC/
ACCESSORY or ON/RUN.

3. From any open position, pull
the power window switch up
until the window is fully closed.

4. Hold the switch up for
approximately two seconds
after the window is fully closed.

The window is now reprogrammed.

Express Window Anti-Pinch
Feature

If any object is in the path of the
window when express-up is active,
the window stops at the obstacle
and auto-reverses to a preset
factory position. Weather conditions
such as severe icing also cause the
window to auto-reverse. The
window returns to normal operation
once the obstacle or condition is
removed.

Express Window Anti-Pinch
Override

{

Warning

If express override is activated,
the window will not reverse
automatically. You or others could
be injured and the window could
be damaged. Before you use
express override, make sure that
all people and obstructions are
clear of the window path.

The anti-pinch feature can be
overridden in a supervised mode.
Hold the window switch in the
partially or fully pulled up position.
The window goes up for as long as
the switch is held. Once the switch
is released, the express mode is
reactivated.

In this mode, the window can still
close on an object in its path. Use
care when using the override mode.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Keys, Doors, and Windows 47

Window Lockout

This feature prevents the rear
passenger windows from operating,
except from the driver position.

.

Press

Z { to activate the rear

window locks. An indicator light
will illuminate when the feature
is on.

.

Press

Z { again to deactivate

the rear window locks.

The safety locks are also enabled.
See Safety Locks 0 35.

Sun Visors

Pull the sun visor down to block
glare. Detach the sun visor from the
center mount to pivot to the side
window or, if equipped, extend
along the rod.

Roof

Sunroof

1. Sunroof Switch

2. Sunshade Switch

If equipped, the sunroof only
operates when the ignition is in
ACC/ACCESSORY or ON/RUN,
or when Retained Accessory Power
(RAP) is active. See Retained
Accessory Power (RAP) 0 264.

Vent : From the closed position,
press the rear of the switch (1) to
vent the sunroof.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

48 Keys, Doors, and Windows

Open/Close : To open the sunroof,

press and hold the rear of the
switch (1) until the sunroof reaches
the desired position. Press and hold
the front of the switch (1) to close it.

Express-Open/Express-Close :

To express-open the sunroof, fully
press and release the rear of the
switch (1). Press the switch again to
stop it. To express-close the
sunroof, fully press and release the
front of the switch (1). Press the
switch again to stop it.

Sunshade : To open or close the
sunshade, press and hold the rear
or front of the switch (2) until the
sunshade reaches the desired
position.

To express-open or express-close
the sunshade, fully press and
release the rear or front of
switch (2). Press the switch again to
stop it.

When the sunroof is opened, an air
deflector will automatically raise.
The air deflector will retract when
the sunroof is closed.

Automatic Reversal System

The sunroof/sunshade is equipped
with an automatic reversal system
that is only active when the sunroof/
sunshade is being operated in
express mode. If an object is in the
path of the sunroof/sunshade while
it is express-closing, the reversal
system will detect the object
and stop.

In the event of closing difficulties
like frost or other conditions, it is
possible to override the reversal
system. To override the reversal
system, close in manual mode. To
stop the movement, release the
switch.

Dirt and debris may collect on the
sunroof seal or in the track. This
could cause an issue with sunroof
operation or noise. It could also plug
the water drainage system.
Periodically open the sunroof and
remove any obstacles or loose
debris. Wipe the sunroof seal and
roof sealing area using a clean
cloth, mild soap, and water. Do not
remove grease from the sunroof.

If water is seen dripping into the
water drainage system, this is
normal.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 49

Seats and
Restraints

Head Restraints

Head Restraints . . . . . . . . . . . . . . . 50

Front Seats

Power Seat Adjustment . . . . . . . . 52

Lumbar Adjustment . . . . . . . . . . . . 52

Thigh Support Adjustment . . . . . 52

Reclining Seatbacks . . . . . . . . . . . 53

Memory Seats . . . . . . . . . . . . . . . . . 53

Heated and Cooled Front

Seats . . . . . . . . . . . . . . . . . . . . . . . . . 55

Rear Seats

Rear Seats . . . . . . . . . . . . . . . . . . . . 56

Rear Seat Armrest . . . . . . . . . . . . . 57

Heated Rear Seats . . . . . . . . . . . . 58

Safety Belts

Safety Belts . . . . . . . . . . . . . . . . . . . . 58

How to Wear Safety Belts

Properly . . . . . . . . . . . . . . . . . . . . . . 59

Lap-Shoulder Belt . . . . . . . . . . . . . 60

Safety Belt Use During

Pregnancy . . . . . . . . . . . . . . . . . . . . 63

Safety Belt Extender . . . . . . . . . . . 64

Safety System Check . . . . . . . . . . 64

Safety Belt Care . . . . . . . . . . . . . . . 64

Replacing Safety Belt System

Parts after a Crash . . . . . . . . . . . 65

Airbag System

Airbag System . . . . . . . . . . . . . . . . . 65

Where Are the Airbags? . . . . . . . 67

When Should an Airbag

Inflate? . . . . . . . . . . . . . . . . . . . . . . . 69

What Makes an Airbag

Inflate? . . . . . . . . . . . . . . . . . . . . . . . 70

How Does an Airbag

Restrain? . . . . . . . . . . . . . . . . . . . . . 70

What Will You See after an

Airbag Inflates? . . . . . . . . . . . . . . 71

Passenger Sensing System . . . 72
Servicing the Airbag-Equipped

Vehicle . . . . . . . . . . . . . . . . . . . . . . . 76

Adding Equipment to the

Airbag-Equipped Vehicle . . . . . 77

Airbag System Check . . . . . . . . . . 77

Replacing Airbag System Parts

after a Crash . . . . . . . . . . . . . . . . . 78

Child Restraints

Older Children . . . . . . . . . . . . . . . . . 78

Infants and Young Children . . . . 80

Child Restraint Systems . . . . . . . 82

Where to Put the Restraint . . . . . 84

Lower Anchors and Tethers for

Children (LATCH System) . . . . 85

Replacing LATCH System Parts

After a Crash . . . . . . . . . . . . . . . . . 91

Securing Child Restraints

(Rear Seat) . . . . . . . . . . . . . . . . . . . 92

Securing Child Restraints (Front

Passenger Seat) . . . . . . . . . . . . . 94

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

50 Seats and Restraints

Head Restraints

Front Seats

The vehicle's front seats have
adjustable head restraints in the
outboard seating positions.

{

Warning

With head restraints that are not
installed and adjusted properly,
there is a greater chance that
occupants will suffer a neck/
spinal injury in a crash. Do not
drive until the head restraints for
all occupants are installed and
adjusted properly.

Adjust the head restraint so that the
top of the restraint is at the same
height as the top of the occupant's
head. This position reduces the
chance of a neck injury in a crash.

To raise or lower the head restraint,
press the button located on the side
of the head restraint, and pull up or

push the head restraint down, and
release the button. Pull and push on
the head restraint after the button is
released to make sure that it is
locked in place.

To adjust the head restraint forward
and rearward, press the button
located on the side facing of the
head restraint and move it forward
or rearward until the desired locking
position is reached. Try to move the
head restraint after the button is
released to make sure that it is
locked in place.

The front seat outboard head
restraints are not removable.

Rear Seats

The vehicle's rear seats have
adjustable head restraints in the
outboard seating positions.

The height of the head restraint can
be adjusted. Pull the head restraint
up to raise it. Try to move the head
restraint to make sure that it is
locked in place.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 51

To lower the head restraint, press
the button located on the top of the
seatback and push the head
restraint down. Try to move the
head restraint after the button is
released to make sure it is locked in
place.

Always adjust the head restraint so
that the top of the restraint is at the
same height as the top of the
occupant’s head.

The rear outboard head restraints
are designed to be folded. The head
restraint can be folded backward to
allow for better visibility when the
rear seat is unoccupied. To fold the
head restraint, press the button on
the side of the head restraint.

When an occupant is in the seat,
always return the head restraint to
the upright position. Pull the head
restraint up and push it backward
until it locks into place. Push and
pull on the head restraint to make
sure that it is locked.

If you are installing a child restraint
in the rear seat, see “Securing a
Child Restraint Designed for the
LATCH System” under Lower

Anchors and Tethers for Children
(LATCH System) 0 85.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

52 Seats and Restraints

Front Seats

Power Seat Adjustment

To adjust a power seat:

.

Move the seat forward or
rearward by sliding the control
forward or rearward.

.

Raise or lower the front part of
the seat cushion by moving the
front of the control up or down.

.

Raise or lower the entire seat by
moving the rear of the control up
or down.

To adjust the seatback, see
Reclining Seatbacks 0 53.

To adjust the lumbar support, see
Lumbar Adjustment 0 52.

Lumbar Adjustment

To adjust the lumbar support,
if equipped:

.

Press the front or rear of the
switch to increase or decrease
lumbar support.

.

Press the top or bottom of the
switch to raise or lower the
lumbar support.

.

Release the switch when the
level of support is reached.

Thigh Support
Adjustment

If equipped, adjust the manual leg
extension by pulling up on the lever,
and then pulling or pushing on the
support to lengthen or shorten it.
Release the lever to lock it in place.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 53

Reclining Seatbacks

{

Warning

Sitting in a reclined position when
the vehicle is in motion can be
dangerous. Even when buckled
up, the safety belts cannot do
their job.

The shoulder belt will not be
against your body. Instead, it will
be in front of you. In a crash, you
could go into it, receiving neck or
other injuries.

The lap belt could go up over
your abdomen. The belt forces
would be there, not at your pelvic
bones. This could cause serious
internal injuries.

For proper protection when the
vehicle is in motion, have the
seatback upright. Then sit well
back in the seat and wear the
safety belt properly.

Do not have a seatback reclined if
the vehicle is moving.

Power Reclining Seatbacks

To adjust a power seatback:

.

Tilt the top of the control
rearward to recline.

.

Tilt the top of the control forward
to raise.

Memory Seats

If equipped, the 1, 2, SET, and B
(Exit) buttons on the driver door are
used to manually store and recall
memory settings for the driver seat,
outside mirrors, and power tilt and
telescoping steering column
positions.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

54 Seats and Restraints

Storing Memory Positions

To store positions to the 1 and 2
buttons:

1. Place the ignition in ON/RUN
or ACC/ACCESSORY.

2. Adjust the driver seat, outside
mirrors, and the power tilt and
telescoping steering column.

3. Press and release SET. A beep
will sound.

4. Immediately press and hold 1
until two beeps sound.

5. Repeat Steps 1–4 for a second
driver using 2.

To store positions to the

B (Exit)

button and easy exit features,
repeat steps 1–4 using

B to store

your positions for getting out of the
vehicle.

Manually Recalling Memory
Positions

Press and hold 1, 2, or

B (Exit) to

manually recall the previously
stored memory positions. Releasing

1, 2, or

B before the stored

positions are reached stops the
recall.

Automatically Recalling Memory
Positions (Auto Memory Recall)

When the Auto (Automatic) Memory
Recall feature is enabled in the
vehicle personalization menu, the
current driver’s previously stored 1
or 2 positions are recalled by
placing the ignition in ON/RUN or
ACC/ACCESSORY.

See “Auto Memory Recall” under
"Comfort and Convenience" in
Vehicle Personalization 0 146.

To stop recall movement, press one
of the memory, power mirror,
or power seat controls.

RKE transmitters are not labeled
with a number. If your memory seat
position is saved to 1 or 2 but this
position is not automatically
recalling, then store your positions
to the other button or switch RKE
transmitters with the other driver.

Easy Exit Recall

When the Easy Exit Recall feature
is enabled in the vehicle
personalization menu, the positions

previously stored to the

B (Exit)

button are automatically recalled
when getting out of the vehicle.

See Vehicle Personalization 0 146.

Obstructions

If something has blocked the driver
seat and/or power tilt and
telescoping steering column while
recalling a memory position, the
recall may stop. Remove the
obstruction. Then do one of the
following:

.

If manually or automatically
recalling the memory position,
press and hold the appropriate
manual control for the memory
item that is not recalling for
two seconds. Try recalling again
by pressing the appropriate
memory button.

.

If recalling the exit position,
press and hold the appropriate
manual control for the exit

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 55

feature not recalling for
two seconds. Then try recalling
the exit position again.

If the memory position is still not
recalling, see your dealer for
service.

Heated and Cooled Front
Seats

{

Warning

If you cannot feel temperature
change or pain to the skin, the
seat heater may cause burns. To
reduce the risk of burns, people
with such a condition should use
care when using the seat heater,
especially for long periods of
time. Do not place anything on
the seat that insulates against
heat, such as a blanket, cushion,
cover, or similar item. This may
cause the seat heater to
overheat. An overheated seat
heater may cause a burn or may
damage the seat.

If equipped, the buttons are near the
climate controls. To operate, the
engine must be running.

Press

J or z to heat the driver or

passenger seat cushion and
seatback.

The passenger seat may take
longer to heat up.

Press

C or { to cool the driver or

passenger seat.

Press the button once for the
highest setting. With each press of
the button, the heated and cooled
seat will change to the next lower
setting, and then the off setting.

Three lights indicate the highest
setting, and one light indicates the
lowest.

If the heated seats are on high, the
level may automatically be lowered
after approximately 30 minutes.

Remote Start Auto Heated and
Cooled Seats

The heated and cooled seats can
be programmed to turn on
automatically during a remote
vehicle start when conditions allow.
The heated seat function can be
programmed to come on when
ENGINE START/STOP is pressed
under certain conditions. Press the
heated or cooled seat button to use
the heated or cooled seats after the
vehicle is started.

The heated and cooled seat button
lights will not turn on during a
remote start.

The temperature of an unoccupied
seat may be reduced.

To program the heated and cooled
seat features, see Vehicle
Personalization 0 146.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

56 Seats and Restraints

Rear Seats

Rear Seat Adjustment

The second row seats slide forward
for more room.

To adjust the seat position, lift the
lever below the seat cushion and
slide the seat forward or backward.

Split Folding Seatbacks

Either side of the rear seatback can
be folded down for more cargo
space.

Manually Folding the
Seatbacks

Caution

Folding a rear seat with the safety
belts still fastened may cause
damage to the seat or the safety
belts. Always unbuckle the safety
belts and return them to their
normal stowed position before
folding a rear seat.

Sliding Seatback

To fold a sliding seatback:

1. Place the front seatbacks in the
upright position. See Reclining
Seatbacks 0 53.

2. Fold the rear seat head
restraints. See Head
Restraints 0 50.

3. Pull on the lever on the side of
the seatback to unlock it and
fold the seatback forward.

4. Verify the seat is locked in the
folded position by pushing
down on the seatback.

5. Repeat the steps for the other
seatback, if desired.

Automatically Folding the
Seatbacks

If equipped, to automatically fold the
seatback:

1. Place the front seatbacks in the
upright position. See Reclining
Seatbacks 0 53.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 57

2. Fold the rear seat head
restraints. See Head
Restraints 0 50.

3. Pull the lever to activate the
automatic folding feature.

4. Verify the seat is locked in the
folded position by pushing
down on the seatback.

Keep the seatback in the upright,
locked position when not in use.

Raising the Seatbacks

{

Warning

If either seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause
injury to the person sitting there.
Always push and pull on the
seatbacks to be sure they are
locked.

{

Warning

A safety belt that is improperly
routed, not properly attached,
or twisted will not provide the
protection needed in a crash. The
person wearing the belt could be
seriously injured. After raising the
rear seatback, always check to be
sure that the safety belts are
properly routed and attached, and
are not twisted.

To raise the sliding seatback:

1. Pull on the lever on the side of
the seat cushion to release the
seatback from its locked
position.

2. Push the seatback rearward
until it locks in the upright
position.

3. Make sure the rear safety belts
are in the belt guide and are
not twisted or caught between
the seat cushion and the
seatback.

Rear Seat Armrest

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

58 Seats and Restraints

If equipped, the rear seat has an
armrest in the center of the
seatback. Lower the armrest to
access the cupholders.

To fold, lift the armrest up and push
it rearward until it is flush with the
seatback.

Heated Rear Seats

{

WARNING

If you cannot feel temperature
change or pain to the skin, the
seat heater may cause burns.
See the Warning under Heated
and Cooled Front Seats 0 55.

If equipped, the buttons are on the
rear of the center console.

With the ignition in ON/RUN/START,
press

M or L to heat the left or right

outboard seat cushion. An indicator
on the climate control display
appears when this feature is on.

Press the button once for the
highest setting. With each press of
the button, the heated seat changes
to the next lower setting, and then
the off setting. Three lights indicate
the highest setting, and one light
indicates the lowest.

Safety Belts

This section of the manual
describes how to use safety belts
properly. It also describes some
things not to do with safety belts.

{

Warning

Do not let anyone ride where a
safety belt cannot be worn
properly. In a crash, if you or your
passenger(s) are not wearing
safety belts, injuries can be much
worse than if you are wearing
safety belts. You can be seriously
injured or killed by hitting things
inside the vehicle harder or by
being ejected from the vehicle. In
addition, anyone who is not
buckled up can strike other
passengers in the vehicle.

It is extremely dangerous to ride
in a cargo area, inside or outside
of a vehicle. In a collision,
passengers riding in these areas
are more likely to be seriously
injured or killed. Do not allow

(Continued)

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 59

Warning (Continue d)

passengers to ride in any area of
the vehicle that is not equipped
with seats and safety belts.

Always wear a safety belt, and
check that all passenger(s) are
restrained properly too.

This vehicle has indicators as a
reminder to buckle the safety belts.
See Safety Belt Reminders 0 117.

Why Safety Belts Work

When riding in a vehicle, you travel
as fast as the vehicle does. If the
vehicle stops suddenly, you keep
going until something stops you.
It could be the windshield, the
instrument panel, or the safety belts!

When you wear a safety belt, you
and the vehicle slow down together.
There is more time to stop because
you stop over a longer distance and,
when worn properly, your strongest
bones take the forces from the
safety belts. That is why wearing
safety belts makes such good
sense.

Questions and Answers About
Safety Belts

Q: Will I be trapped in the vehicle

after a crash if I am wearing a
safety belt?

A: You could be — whether you are

wearing a safety belt or not.
Your chance of being conscious
during and after a crash, so you

can unbuckle and get out, is
much greater if you are belted.

Q: If my vehicle has airbags, why

should I have to wear safety
belts?

A: Airbags are supplemental

systems only; so they work with
safety belts — not instead of
them. Whether or not an airbag
is provided, all occupants still
have to buckle up to get the
most protection.

Also, in nearly all states and in
all Canadian provinces, the law
requires wearing safety belts.

How to Wear Safety Belts
Properly

This section is only for people of
adult size.

There are special things to know
about safety belts and children, and
there are different rules for smaller
children and infants. If a child will be
riding in the vehicle, see Older

Children 0 78 or Infants and Young
Children 0 80. Follow those rules for

everyone's protection.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

60 Seats and Restraints

It is very important for all occupants
to buckle up. Statistics show that
unbelted people are hurt more often
in crashes than those who are
wearing safety belts.

There are important things to know
about wearing a safety belt properly.

.

Sit up straight and always keep
your feet on the floor in front
of you.

.

Always use the correct buckle
for your seating position.

.

Wear the lap part of the belt low
and snug on the hips, just
touching the thighs. In a crash,
this applies force to the strong

pelvic bones and you would be
less likely to slide under the lap
belt. If you slid under it, the belt
would apply force on your
abdomen. This could cause
serious or even fatal injuries.

.

Wear the shoulder belt over the
shoulder and across the chest.
These parts of the body are best
able to take belt restraining
forces. The shoulder belt locks if
there is a sudden stop or crash.

{

Warning

You can be seriously injured,
or even killed, by not wearing
your safety belt properly.

.

Never allow the lap or
shoulder belt to become
loose or twisted.

.

Never wear the shoulder
belt under both arms or
behind your back.

.

Never route the lap or
shoulder belt over an
armrest.

Lap-Shoulder Belt

All seating positions in the vehicle
have a lap-shoulder belt.

The following instructions explain
how to wear a lap-shoulder belt
properly.

1. Adjust the seat, if the seat is
adjustable, so you can sit up
straight. To see how, see
“Seats” in the Index.

2. Pick up the latch plate and pull
the belt across you. Do not let
it get twisted.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 61

The lap-shoulder belt may lock
if you pull the belt across you
very quickly. If this happens, let
the belt go back slightly to
unlock it. Then pull the belt
across you more slowly.

If the shoulder portion of a
passenger belt is pulled out all
the way, the child restraint
locking feature may be
engaged. If this happens, let
the belt go back all the way
and start again.

Engaging the child restraint
locking feature in the front
outboard seating position may
affect the passenger sensing
system. See Passenger
Sensing System 0 72.

If the webbing locks in the latch
plate before it reaches the
buckle, tilt the latch plate flat to
unlock.

3. Push the latch plate into the
buckle until it clicks.

Pull up on the latch plate to
make sure it is secure. If the
belt is not long enough, see
Safety Belt Extender 0 64.

Position the release button on
the buckle so that the safety
belt could be quickly unbuckled
if necessary.

4. If equipped with a shoulder belt
height adjuster, move it to the
height that is right for you. See
“Shoulder Belt Height Adjuster”
later in this section for
instructions on use and
important safety information.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

62 Seats and Restraints

5. To make the lap part tight, pull
up on the shoulder belt.

It may be necessary to pull
stitching on the safety belt
through the latch plate to fully
tighten the lap belt on smaller
occupants.

To unlatch the belt, push the button
on the buckle. The belt should
return to its stowed position. Slide
the latch plate up the safety belt
webbing when the safety belt is not
in use. The latch plate should rest
on the stitching on the safety belt,
near the guide loop on the side wall.

Always stow the safety belt slowly.
If the safety belt webbing returns
quickly to the stowed position, the
retractor may lock and cannot be
pulled out. If this happens, pull the
safety belt straight out firmly to
unlock the webbing, and then
release it. If the webbing is still
locked in the retractor, see your
dealer.

Before a door is closed, be sure the
safety belt is out of the way. If a
door is slammed against a safety
belt, damage can occur to both the
safety belt and the vehicle.

Shoulder Belt Height Adjuster

The vehicle has a shoulder belt
height adjuster for the driver and
front outboard passenger seating
positions.

Adjust the height so the shoulder
portion of the belt is on the shoulder
and not falling off of it. The belt
should be close to, but not
contacting, the neck. Improper
shoulder belt height adjustment
could reduce the effectiveness of
the safety belt in a crash. See How
to Wear Safety Belts Properly 0 59.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 63

Move the height adjuster up to the
desired position by pushing up on
the height adjuster.

Press the release button to lower
the height adjuster. After the height
adjuster is set to the desired
position, try to move it down without
pressing the release button to make
sure it has locked into position.

Safety Belt Pretensioners

This vehicle has safety belt
pretensioners for the front outboard
occupants. Although the safety belt
pretensioners cannot be seen, they
are part of the safety belt assembly.
They can help tighten the safety

belts during the early stages of a
moderate to severe frontal, near
frontal, or rear crash if the threshold
conditions for pretensioner
activation are met. Safety belt
pretensioners can also help tighten
the safety belts in a side crash or a
rollover event.

Pretensioners work only once. If the
pretensioners activate in a crash,
the pretensioners and probably
other parts of the vehicle's safety
belt system will need to be replaced.
See Replacing Safety Belt System
Parts after a Crash 0 65.

Do not sit on the outboard safety
belt while entering or exiting the
vehicle or at any time while sitting in
the seat. Sitting on the safety belt
can damage the webbing and
hardware.

Rear Safety Belt Comfort
Guides

Rear safety belt comfort guides may
provide added safety belt comfort
for older children who have
outgrown booster seats and for
some adults. When installed on a

shoulder belt, the comfort guide
positions the belt away from the
neck and head.

Comfort guides are available
through your dealer for the rear
outboard seating positions.
Instructions are included with the
guide.

Safety Belt Use During
Pregnancy

Safety belts work for everyone,
including pregnant women. Like all
occupants, they are more likely to
be seriously injured if they do not
wear safety belts.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

64 Seats and Restraints

A pregnant woman should wear a
lap-shoulder belt, and the lap
portion should be worn as low as
possible, below the rounding,
throughout the pregnancy.

The best way to protect the fetus is
to protect the mother. When a safety
belt is worn properly, it is more likely
that the fetus will not be hurt in a
crash. For pregnant women, as for
anyone, the key to making safety
belts effective is wearing them
properly.

Safety Belt Extender

If the vehicle's safety belt will fasten
around you, you should use it.

But if a safety belt is not long
enough, your dealer will order you
an extender. When you go in to
order it, take the heaviest coat you
will wear, so the extender will be
long enough for you. To help avoid
personal injury, do not let someone
else use it, and use it only for the
seat it is made to fit. The extender
has been designed for adults. Never
use it for securing child restraints.
To wear it, attach it to the regular

safety belt. For more information,
see the instruction sheet that comes
with the extender.

Safety System Check

Now and then, check that the safety
belt reminder light, safety belts,
buckles, latch plates, retractors, and
anchorages are all working properly.
Look for any other loose or
damaged safety belt system parts
that might keep a safety belt system
from doing its job. See your dealer
to have it repaired. Torn or frayed
safety belts may not protect you in a
crash. They can rip apart under
impact forces. If a belt is torn or
frayed, get a new one right away.

Make sure the safety belt reminder
light is working. See Safety Belt
Reminders 0 117.

Keep safety belts clean and dry.
See Safety Belt Care 0 64.

Safety Belt Care

Keep belts clean and dry.

{

Warning

Do not bleach or dye safety belt
webbing. It may severely weaken
the webbing. In a crash, they
might not be able to provide
adequate protection. Clean and
rinse safety belt webbing only
with mild soap and lukewarm
water. Allow the webbing to dry.

Safety belts should be properly
cared for and maintained.

Safety belt hardware should be kept
dry and free of dust or debris. As
necessary exterior hard surfaces
and safety belt webbing may be
lightly cleaned with mild soap and
water. Ensure there is not excessive
dust or debris in the mechanism.
If dust or debris exists in the system
please see the dealer. Parts may
need to be replaced to ensure
proper functionality of the system.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 65

Replacing Safety Belt
System Parts after a
Crash

{

Warning

A crash can damage the safety
belt system in the vehicle.
A damaged safety belt system
may not properly protect the
person using it, resulting in
serious injury or even death in a
crash. To help make sure the
safety belt systems are working
properly after a crash, have them
inspected and any necessary
replacements made as soon as
possible.

After a minor crash, replacement of
safety belts may not be necessary.
But the safety belt assemblies that
were used during any crash may
have been stressed or damaged.
See your dealer to have the safety
belt assemblies inspected or
replaced.

New parts and repairs may be
necessary even if the safety belt
system was not being used at the
time of the crash.

Have the safety belt pretensioners
checked if the vehicle has been in a
crash, or if the airbag readiness light
stays on after you start the vehicle
or while you are driving. See Airbag
Readiness Light 0 118.

Airbag System

The vehicle has the following
airbags:

.

A frontal airbag for the driver.

.

A frontal airbag for the front
outboard passenger.

.

A knee airbag for the driver.

.

A knee airbag for the front
outboard passenger.

.

A seat-mounted side impact
airbag for the driver.

.

A seat-mounted side impact
airbag for the front outboard
passenger.

.

Seat-mounted side impact
airbags for the second row
outboard passengers.

.

A roof-rail airbag for the driver
and the passenger seated
directly behind the driver.

.

A roof-rail airbag for the front
outboard passenger and the
passenger seated directly
behind the front outboard
passenger.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

66 Seats and Restraints

All vehicle airbags have the word
AIRBAG on the trim or on a label
near the deployment opening.

For frontal airbags, the word
AIRBAG is on the center of the
steering wheel for the driver and on
the instrument panel for the front
outboard passenger.

For knee airbags, the word AIRBAG
is on the lower part of the
instrument panel.

For seat-mounted side impact
airbags, the word AIRBAG is on the
side of the seatback closest to
the door.

For roof-rail airbags, the word
AIRBAG is on the ceiling or trim.

Airbags are designed to supplement
the protection provided by safety
belts. Even though today's airbags
are also designed to help reduce
the risk of injury from the force of an
inflating bag, all airbags must inflate
very quickly to do their job.

Here are the most important things
to know about the airbag system:

{

Warning

You can be severely injured or
killed in a crash if you are not
wearing your safety belt, even
with airbags. Airbags are
designed to work with safety
belts, not replace them. Also,
airbags are not designed to inflate
in every crash. In some crashes
safety belts are the only restraint.
See When Should an Airbag
Inflate? 0 69.

Wearing your safety belt during a
crash helps reduce your chance
of hitting things inside the vehicle
or being ejected from it. Airbags
are “supplemental restraints” to
the safety belts. Everyone in the
vehicle should wear a safety belt
properly, whether or not there is
an airbag for that person.

{

Warning

Because airbags inflate with great
force and faster than the blink of
an eye, anyone who is up
against, or very close to any
airbag when it inflates can be
seriously injured or killed. Do not
sit unnecessarily close to any
airbag, as you would be if sitting
on the edge of the seat or leaning
forward. Safety belts help keep
you in position before and during
a crash. Always wear a safety
belt, even with airbags. The driver
should sit as far back as possible
while still maintaining control of
the vehicle. The safety belts and
the front outboard passenger
airbags are most effective when
you are sitting well back and
upright in the seat with both feet
on the floor.

Occupants should not lean on or
sleep against the door or side
windows in seating positions with
seat-mounted side impact airbags
and/or roof-rail airbags.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 67

{

Warning

Children who are up against,
or very close to, any airbag when
it inflates can be seriously injured
or killed. Always secure children
properly in the vehicle. To read
how, see Older Children 0 78 or
Infants and Young Children 0 80.

There is an airbag readiness light
on the instrument cluster, which
shows the airbag symbol. The
system checks the airbag electrical
system for malfunctions. The light
tells you if there is an electrical
problem. See Airbag Readiness
Light 0 118 for more information.

Where Are the Airbags?

The driver frontal airbag is in the
center of the steering wheel.

The front outboard passenger
frontal airbag is in the passenger
side instrument panel.

The driver knee airbag is below the
steering column. The front outboard
passenger knee airbag is below the
glove box.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

68 Seats and Restraints

Driver Side Shown, Passenger

Side Similar

The seat-mounted side impact
airbags for the driver and front
outboard passenger are in the side
of the seatbacks closest to the door.

Driver Side Shown, Passenger

Side Similar

The roof-rail airbags for the driver,
front outboard passenger, and
second row outboard passengers
are in the ceiling above the side
windows.

Rear Seat Driver Side Shown,

Passenger Side Similar

The second row seat-mounted side
impact airbags are in the sides of
the seatback closest to the door.

{

Warning

If something is between an
occupant and an airbag, the
airbag might not inflate properly
or it might force the object into
that person causing severe injury
or even death. The path of an
inflating airbag must be kept
clear. Do not put anything

(Continued)

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 69

Warning (Continue d)

between an occupant and an
airbag, and do not attach or put
anything on the steering wheel
hub or on or near any other
airbag covering.

Do not use seat accessories that
block the inflation path of a
seat-mounted side impact airbag.

Never secure anything to the roof
of a vehicle with roof-rail airbags
by routing a rope or tie‐down
through any door or window
opening. If you do, the path of an
inflating roof-rail airbag will be
blocked.

When Should an Airbag
Inflate?

This vehicle is equipped with
airbags. See Airbag System 0 65.
Airbags are designed to inflate if the
impact exceeds the specific airbag
system's deployment threshold.
Deployment thresholds are used to
predict how severe a crash is likely

to be in time for the airbags to
inflate and help restrain the
occupants. The vehicle has
electronic sensors that help the
airbag system determine the
severity of the impact. Deployment
thresholds can vary with specific
vehicle design.

Frontal airbags are designed to
inflate in moderate to severe frontal
or near frontal crashes to help
reduce the potential for severe
injuries, mainly to the driver's or
front outboard passenger's head
and chest.

Whether the frontal airbags will or
should inflate is not based primarily
on how fast the vehicle is traveling.
It depends on what is hit, the
direction of the impact, and how
quickly the vehicle slows down.

Frontal airbags may inflate at
different crash speeds depending on
whether the vehicle hits an object
straight on or at an angle, and
whether the object is fixed or
moving, rigid or deformable, narrow
or wide.

Frontal airbags are not intended to
inflate during vehicle rollovers, rear
impacts, or many side impacts.

In addition, the vehicle has
advanced technology frontal
airbags. Advanced technology
frontal airbags adjust the restraint
according to crash severity or
occupant interaction.

The vehicle also has a seat position
sensor that enables the sensing
system to monitor the position of the
front outboard passenger seat. The
passenger seat position sensor and
the passenger safety belt buckle
provide information that is used to
adjust the deployment of the front
outboard passenger frontal airbag.

Knee airbags are designed to inflate
in moderate to severe frontal or
near frontal impacts. Knee airbags
are not designed to inflate during
vehicle rollovers, in rear impacts,
or in many side impacts.

The passenger seat position sensor
and the passenger safety belt
buckle also provide information that

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

70 Seats and Restraints

is used to determine if the
passenger knee airbag should
inflate.

Seat-mounted side impact airbags
are designed to inflate in moderate
to severe side crashes depending
on the location of the impact.
Seat-mounted side impact airbags
are not designed to inflate in frontal
impacts, near frontal impacts,
rollovers, or rear impacts.
A seat-mounted side impact airbag
is designed to inflate on the side of
the vehicle that is struck.

Roof-rail airbags are designed to
inflate in moderate to severe side
crashes depending on the location
of the impact. In addition, these
roof-rail airbags are designed to
inflate during a rollover or in a
severe frontal impact. Roof-rail
airbags are not designed to inflate in
rear impacts. Both roof-rail airbags
will inflate when either side of the
vehicle is struck, if the sensing
system predicts that the vehicle is
about to roll over on its side, or in a
severe frontal impact.

In any particular crash, no one can
say whether an airbag should have
inflated simply because of the
vehicle damage or the repair costs.

What Makes an Airbag
Inflate?

In a deployment event, the sensing
system sends an electrical signal
triggering a release of gas from the
inflator. Gas from the inflator fills the
airbag causing the bag to break out
of the cover. The inflator, the airbag,
and related hardware are all part of
the airbag module.

For airbag locations, see Where Are
the Airbags? 0 67.

How Does an Airbag
Restrain?

In moderate to severe frontal or
near frontal collisions, even belted
occupants can contact the steering
wheel or the instrument panel. In
moderate to severe side collisions,
even belted occupants can contact
the inside of the vehicle.

Airbags supplement the protection
provided by safety belts by
distributing the force of the impact
more evenly over the
occupant's body.

Rollover capable roof-rail airbags
are designed to help contain the
head and chest of occupants in the
outboard seating positions in the
first and second rows. The rollover
capable roof-rail airbags are
designed to help reduce the risk of
full or partial ejection in rollover
events, although no system can
prevent all such ejections.

But airbags would not help in many
types of collisions, primarily
because the occupant's motion is
not toward those airbags. See When
Should an Airbag Inflate? 0 69.

Airbags should never be regarded
as anything more than a supplement
to safety belts.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 71

What Will You See after
an Airbag Inflates?

After the frontal, knee, and
seat-mounted side impact airbags
inflate, they quickly deflate, so
quickly that some people may not
even realize an airbag inflated.
Roof-rail airbags may still be at least
partially inflated for some time after
they inflate. Some components of
the airbag module may be hot for
several minutes. For location of the
airbags, see Where Are the
Airbags? 0 67.

The parts of the airbag that come
into contact with you may be warm,
but not too hot to touch. There may
be some smoke and dust coming
from the vents in the deflated
airbags. Airbag inflation does not
prevent the driver from seeing out of
the windshield or being able to steer
the vehicle, nor does it prevent
people from leaving the vehicle.

{

Warning

When an airbag inflates, there
may be dust in the air. This dust
could cause breathing problems
for people with a history of
asthma or other breathing trouble.
To avoid this, everyone in the
vehicle should get out as soon as
it is safe to do so. If you have
breathing problems but cannot
get out of the vehicle after an
airbag inflates, then get fresh air
by opening a window or a door.
If you experience breathing
problems following an airbag
deployment, you should seek
medical attention.

The vehicle has a feature that may
automatically unlock the doors, turn
on the interior lamps and hazard
warning flashers, and shut off the
fuel system after the airbags inflate.
The feature may also activate,
without airbag inflation, after an
event that exceeds a predetermined
threshold. You can lock the doors,
turn off the interior lamps, and turn

off the hazard warning flashers by
using the controls for those
features.

{

Warning

A crash severe enough to inflate
the airbags may have also
damaged important functions in
the vehicle, such as the fuel
system, brake and steering
systems, etc. Even if the vehicle
appears to be drivable after a
moderate crash, there may be
concealed damage that could
make it difficult to safely operate
the vehicle.

Use caution if you should attempt
to restart the engine after a crash
has occurred.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

72 Seats and Restraints

In many crashes severe enough to
inflate the airbag, windshields are
broken by vehicle deformation.
Additional windshield breakage may
also occur from the front outboard
passenger airbag.

.

Airbags are designed to inflate
only once. After an airbag
inflates, you will need some new
parts for the airbag system.
If you do not get them, the
airbag system will not be there
to help protect you in another
crash. A new system will include
airbag modules and possibly
other parts. The service manual
for the vehicle covers the need
to replace other parts.

.

The vehicle has a crash sensing
and diagnostic module which
records information after a
crash. See Vehicle Data

Recording and Privacy 0 407
and Event Data
Recorders 0 408.

.

Let only qualified technicians
work on the airbag systems.
Improper service can mean that

an airbag system will not work
properly. See your dealer for
service.

Passenger Sensing
System

The vehicle has a passenger
sensing system for the front
outboard passenger position. The
passenger airbag status indicator
will light on the overhead console
when the vehicle is started.

United States

Canada and Mexico

The words ON and OFF, or the
symbol for on and off, will be visible
during the system check. When the
system check is complete, either the
word ON or OFF, or the symbol for
on and off will be visible. See

Passenger Airbag Status
Indicator 0 118.

The passenger sensing system
turns off the front outboard
passenger frontal airbag and knee
airbag, under certain conditions. No
other airbag is affected by the
passenger sensing system.

The passenger sensing system
works with sensors that are part of
the front outboard passenger seat
and safety belt. The sensors are
designed to detect the presence of
a properly seated occupant and
determine if the front outboard

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 73

passenger frontal airbag and knee
airbag should be allowed to inflate
or not.

According to accident statistics,
children are safer when properly
secured in a rear seat in a correct
child restraint for their weight
and size.

Whenever possible, children aged
12 and under should be secured in
a rear seating position.

Never put a rear-facing child seat in
the front. This is because the risk to
the rear-facing child is so great,
if the airbag inflates.

{

Warning

A child in a rear-facing child
restraint can be seriously injured
or killed if the passenger frontal
airbag inflates. This is because
the back of the rear-facing child
restraint would be very close to
the inflating airbag. A child in a
forward-facing child restraint can
be seriously injured or killed if the

(Continued)

Warning (Continue d)

passenger frontal airbag inflates
and the passenger seat is in a
forward position.

Even if the passenger sensing
system has turned off the front
outboard passenger airbag(s), no
system is fail-safe. No one can
guarantee that an airbag will not
deploy under some unusual
circumstance, even though the
airbag(s) are off.

Never put a rear-facing child
restraint in the front seat, even if
the airbag is off. If securing a
forward-facing child restraint in
the front outboard passenger
seat, always move the seat as far
back as it will go. It is better to
secure child restraints in the rear
seat. Consider using another
vehicle to transport the child
when a rear seat is not available.

The passenger sensing system is
designed to turn off the front
outboard passenger frontal airbag
and knee airbag if:

.

The front outboard passenger
seat is unoccupied.

.

The system determines that an
infant is present in a child
restraint.

.

A front outboard passenger
takes his/her weight off of the
seat for a period of time.

.

There is a critical problem with
the airbag system or the
passenger sensing system.

When the passenger sensing
system has turned off the front
outboard passenger frontal airbag
and knee airbag, the off indicator
will light and stay lit as a reminder
that the airbags are off. See

Passenger Airbag Status
Indicator 0 118.

The passenger sensing system is
designed to turn on the front
outboard passenger frontal airbag
and knee airbag anytime the system

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

74 Seats and Restraints

senses that a person of adult size is
sitting properly in the front outboard
passenger seat.

When the passenger sensing
system has allowed the airbags to
be enabled, the on indicator will light
and stay lit as a reminder that the
airbags are active.

For some children, including
children in child restraints, and for
very small adults, the passenger
sensing system may or may not turn
off the front outboard passenger
frontal airbag and knee airbag,
depending upon the person’s
seating posture and body build.
Everyone in the vehicle who has
outgrown child restraints should
wear a safety belt properly —
whether or not there is an airbag for
that person.

{

Warning

If the airbag readiness light ever
comes on and stays on, it means
that something may be wrong
with the airbag system. To help

(Continued)

Warning (Continue d)

avoid injury to yourself or others,
have the vehicle serviced right
away. See Airbag Readiness
Light 0 118 for more information,
including important safety
information.

If the On Indicator Is Lit for a
Child Restraint

The passenger sensing system is
designed to turn off the front
outboard passenger frontal airbag
and knee airbag if the system
determines that an infant is present
in a child restraint. If a child restraint
has been installed and the on
indicator is lit:

1. Turn the vehicle off.

2. Remove the child restraint from
the vehicle.

3. Remove any additional items
from the seat such as blankets,
cushions, seat covers, seat
heaters, or seat massagers.

4. Reinstall the child restraint
following the directions
provided by the child restraint
manufacturer and refer to

Securing Child Restraints
(Rear Seat) 0 92 or Securing
Child Restraints (Front
Passenger Seat) 0 94.

Make sure the safety belt
retractor is locked by pulling
the shoulder belt all the way
out of the retractor when
installing the child restraint,
even if the child restraint is
equipped with a safety belt
lock-off. When the retractor
lock is set, the belt can be
tightened but not pulled out of
the retractor.

5. If, after reinstalling the child
restraint and restarting the
vehicle, the on indicator is still
lit, turn the vehicle off. Then
slightly recline the vehicle
seatback and adjust the seat
cushion, if adjustable, to make
sure that the vehicle seatback
is not pushing the child
restraint into the seat cushion.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 75

Also make sure the child
restraint is not trapped under
the vehicle head restraint.
If this happens, adjust the head
restraint. See Head
Restraints 0 50.

6. Restart the vehicle.

The passenger sensing system
may or may not turn off the
airbags for a child in a child
restraint depending upon the
child’s size. It is better to
secure the child restraint in a
rear seat. Never put a
rear-facing child restraint in the
front seat, even if the on
indicator is not lit.

If the Off Indicator Is Lit for an
Adult-Sized Occupant

If a person of adult size is sitting in
the front outboard passenger seat,
but the off indicator is lit, it could be
because that person is not sitting
properly in the seat or that the child
restraint locking feature is engaged.
Use the following steps to allow the
system to detect that person and
enable the front outboard passenger
frontal airbag and knee airbag:

1. Turn the vehicle off.

2. Remove any additional material
from the seat, such as
blankets, cushions, seat
covers, seat heaters, or seat
massagers.

3. Place the seatback in the fully
upright position.

4. Have the person sit upright in
the seat, centered on the seat
cushion, with legs comfortably
extended.

5. If the shoulder portion of the
belt is pulled out all the way,
the child restraint locking
feature will be engaged. This
may unintentionally cause the
passenger sensing system to
turn the airbags off for some
adult-sized occupants. If this
happens, unbuckle the belt, let
the belt go back all the way,
and then buckle the belt again
without pulling the belt out all
the way.

6. Restart the vehicle and have
the person remain in this
position for two to
three minutes after the on
indicator is lit.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

76 Seats and Restraints

{

Warning

If the front outboard passenger
airbag is turned off for an
adult-sized occupant, the airbag
will not be able to inflate and help
protect that person in a crash,
resulting in an increased risk of
serious injury or even death. An
adult-sized occupant should not
ride in the front outboard
passenger seat, if the passenger
airbag off indicator is lit.

Additional Factors Affecting
System Operation

Safety belts help keep the
passenger in position on the seat
during vehicle maneuvers and
braking, which helps the passenger
sensing system maintain the
passenger airbag status. See
“Safety Belts” and “Child Restraints”
in the Index for additional
information about the importance of
proper restraint use.

A thick layer of additional material,
such as a blanket or cushion,
or aftermarket equipment such as
seat covers, seat heaters, and seat
massagers can affect how well the
passenger sensing system
operates. We recommend that you
not use seat covers or other
aftermarket equipment except when
approved by GM for your specific
vehicle. See Adding Equipment to

the Airbag-Equipped Vehicle 0 77

for more information about
modifications that can affect how
the system operates.

The on indicator may be lit if an
object, such as a briefcase,
handbag, grocery bag, laptop,
or other electronic device, is put on
an unoccupied seat. If this is not
desired, remove the object from
the seat.

{

Warning

Stowing of articles under the
passenger seat or between the
passenger seat cushion and

(Continued)

Warning (Continue d)

seatback may interfere with the
proper operation of the passenger
sensing system.

Servicing the
Airbag-Equipped Vehicle

Airbags affect how the vehicle
should be serviced. There are parts
of the airbag system in several
places around the vehicle. Your
dealer and the service manual have
information about servicing the
vehicle and the airbag system. To
purchase a service manual, see

Service Publications Ordering
Information 0 405.

{

Warning

For up to 10 seconds after the
vehicle is turned off and the
battery is disconnected, an airbag
can still inflate during improper
service. You can be injured if you

(Continued)

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 77

Warning (Continue d)

are close to an airbag when it
inflates. Avoid yellow connectors.
They are probably part of the
airbag system. Be sure to follow
proper service procedures, and
make sure the person performing
work for you is qualified to do so.

Adding Equipment to the
Airbag-Equipped Vehicle

Adding accessories that change the
vehicle's frame, bumper system,
height, front end, or side sheet
metal, may keep the airbag system
from working properly. The
operation of the airbag system can
also be affected by changing any
parts of the front seats, safety belts,
airbag sensing and diagnostic
module, steering wheel, instrument
panel, any of the airbag modules,
ceiling or pillar garnish trim,
overhead console, front sensors,
side impact sensors, or airbag
wiring.

Your dealer and the service manual
have information about the location
of the airbag sensors, sensing and
diagnostic module, and airbag
wiring.

In addition, the vehicle has a
passenger sensing system for the
front outboard passenger position,
which includes sensors that are part
of the passenger seat. The
passenger sensing system may not
operate properly if the original seat
trim is replaced with non-GM
covers, upholstery, or trim; or with
GM covers, upholstery, or trim
designed for a different vehicle. Any
object, such as an aftermarket seat
heater or a comfort-enhancing pad
or device, installed under or on top
of the seat fabric, could also
interfere with the operation of the
passenger sensing system. This
could either prevent proper
deployment of the passenger
airbag(s) or prevent the passenger
sensing system from properly
turning off the passenger airbag(s).
See Passenger Sensing
System 0 72.

If the vehicle has rollover roof-rail
airbags, see Different Size Tires
and Wheels 0 354 for additional
important information.

If you have to modify your vehicle
because you have a disability and
you have questions about whether
the modifications will affect the
vehicle's airbag system, or if you
have questions about whether the
airbag system will be affected if the
vehicle is modified for any other
reason, call Customer Assistance.
See Customer Assistance
Offices 0 398.

Airbag System Check

The airbag system does not need
regularly scheduled maintenance or
replacement. Make sure the airbag
readiness light is working. See
Airbag Readiness Light 0 118.

Caution

If an airbag covering is damaged,
opened, or broken, the airbag
may not work properly. Do not

(Continued)

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

78 Seats and Restraints

Caution (Continued)

open or break the airbag
coverings. If there are any
opened or broken airbag
coverings, have the airbag
covering and/or airbag module
replaced. For the location of the
airbags, see Where Are the
Airbags? 0 67. See your dealer
for service.

Replacing Airbag System
Parts after a Crash

{

Warning

A crash can damage the airbag
systems in the vehicle.
A damaged airbag system may
not properly protect you and your
passenger(s) in a crash, resulting
in serious injury or even death. To
help make sure the airbag
systems are working properly
after a crash, have them

(Continued)

Warning (Continue d)

inspected and any necessary
replacements made as soon as
possible.

If an airbag inflates, you will need to
replace airbag system parts. See
your dealer for service.

If the airbag readiness light stays on
after the vehicle is started or comes
on when you are driving, the airbag
system may not work properly. Have
the vehicle serviced right away. See
Airbag Readiness Light 0 118.

Child Restraints

Older Children

Older children who have outgrown
booster seats should wear the
vehicle’s safety belts.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 79

The manufacturer instructions that
come with the booster seat state the
weight and height limitations for that
booster. Use a booster seat with a
lap-shoulder belt until the child
passes the fit test below:

.

Sit all the way back on the seat.
Do the knees bend at the seat
edge? If yes, continue. If no,
return to the booster seat.

.

Buckle the lap-shoulder belt.
Does the shoulder belt rest on
the shoulder? If yes, continue.
If no, try using the rear safety
belt comfort guide, if available.
See “Rear Safety Belt Comfort
Guides” under Lap-Shoulder Belt
0 60. If a comfort guide is not
available, or if the shoulder belt
still does not rest on the
shoulder, then return to the
booster seat.

.

Does the lap belt fit low and
snug on the hips, touching the
thighs? If yes, continue. If no,
return to the booster seat.

.

Can proper safety belt fit be
maintained for the length of the
trip? If yes, continue. If no,
return to the booster seat.

Q: What is the proper way to

wear safety belts?

A: An older child should wear a

lap-shoulder belt and get the
additional restraint a shoulder
belt can provide. The shoulder
belt should not cross the face or
neck. The lap belt should fit
snugly below the hips, just
touching the top of the thighs.
This applies belt force to the
child's pelvic bones in a crash.
It should never be worn over the
abdomen, which could cause
severe or even fatal internal
injuries in a crash.

Also see “Rear Safety Belt Comfort
Guides” under Lap-Shoulder
Belt 0 60.

According to accident statistics,
children are safer when properly
restrained in a rear seating position.

In a crash, children who are not
buckled up can strike other people
who are buckled up, or can be
thrown out of the vehicle. Older
children need to use safety belts
properly.

{

Warning

Never allow more than one child
to wear the same safety belt. The
safety belt cannot properly spread
the impact forces. In a crash, they
can be crushed together and
seriously injured. A safety belt
must be used by only one person
at a time.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

80 Seats and Restraints

{

Warning

Never allow a child to wear the
safety belt with the shoulder belt
behind their back. A child can be
seriously injured by not wearing
the lap-shoulder belt properly. In a
crash, the child would not be
restrained by the shoulder belt.
The child could move too far
forward increasing the chance of
head and neck injury. The child
might also slide under the lap
belt. The belt force would then be
applied right on the abdomen.

(Continued)

Warning (Continue d)

That could cause serious or fatal
injuries. The shoulder belt should
go over the shoulder and across
the chest.

Infants and Young
Children

Everyone in a vehicle needs
protection! This includes infants and
all other children. Neither the
distance traveled nor the age and
size of the traveler changes the
need, for everyone, to use safety

restraints. In fact, the law in every
state in the United States and in
every Canadian province says
children up to some age must be
restrained while in a vehicle.

{

Warning

Children can be seriously injured
or strangled if a shoulder belt is
wrapped around their neck. The
shoulder belt can tighten but
cannot be loosened if it is locked.
The shoulder belt locks when it is
pulled all the way out of the
retractor. It unlocks when the
shoulder belt is allowed to go all
the way back into the retractor,
but it cannot do this if it is
wrapped around a child’s neck.
If the shoulder belt is locked and
tightened around a child’s neck,
the only way to loosen the belt is
to cut it.

Never leave children unattended
in a vehicle and never allow
children to play with the safety
belts.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 81

Every time infants and young
children ride in vehicles, they should
have the protection provided by
appropriate child restraints. Neither
the vehicle's safety belt system nor
its airbag system is designed
for them.

Children who are not restrained
properly can strike other people,
or can be thrown out of the vehicle.

{

Warning

Never hold an infant or a child
while riding in a vehicle. Due to
crash forces, an infant or a child
will become so heavy it is not
possible to hold it during a crash.
For example, in a crash at only
40 km/h (25 mph), a 5.5 kg (12 lb)
infant will suddenly become a
110 kg (240 lb) force on a person's
arms. An infant or child should be
secured in an appropriate
restraint.

{

Warning

Children who are up against,
or very close to, any airbag when
it inflates can be seriously injured
or killed. Never put a rear-facing
child restraint in the front
outboard seat. Secure a
rear-facing child restraint in a rear
seat. It is also better to secure a
forward-facing child restraint in a
rear seat. If you must secure a
forward-facing child restraint in
the front outboard seat, always
move the front passenger seat as
far back as it will go.

Q: What are the different types of

add-on child restraints?

A: Add-on child restraints, which

are purchased by the vehicle
owner, are available in four basic
types. Selection of a particular
restraint should take into
consideration not only the child's
weight, height, and age but also
whether or not the restraint will
be compatible with the motor
vehicle in which it will be used.

For most basic types of child
restraints, there are many
different models available. When
purchasing a child restraint, be
sure it is designed to be used in
a motor vehicle. If it is, the

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

82 Seats and Restraints

restraint will have a label saying
that it meets federal motor
vehicle safety standards.

The restraint manufacturer
instructions that come with the
restraint state the weight and
height limitations for a particular
child restraint. In addition, there
are many kinds of restraints
available for children with
special needs.

{

Warning

To reduce the risk of neck and
head injury in a crash, infants and
toddlers should be secured in a
rear-facing child restraint until age
two, or until they reach the
maximum height and weight limits
of their child restraint.

{

Warning

A young child's hip bones are still
so small that the vehicle's regular
safety belt may not remain low on
the hip bones, as it should.
Instead, it may settle up around
the child's abdomen. In a crash,
the belt would apply force on a
body area that is unprotected by
any bony structure. This alone
could cause serious or fatal
injuries. To reduce the risk of
serious or fatal injuries during a
crash, young children should
always be secured in appropriate
child restraints.

Child Restraint Systems

Rear-Facing Infant Seat

A rear-facing infant seat provides
restraint with the seating surface
against the back of the infant.

The harness system holds the infant
in place and, in a crash, acts to
keep the infant positioned in the
restraint.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 83

Forward-Facing Child Seat

A forward-facing child seat provides
restraint for the child's body with the
harness.

Booster Seats

A booster seat is a child restraint
designed to improve the fit of the
vehicle's safety belt system.
A booster seat can also help a child
to see out the window.

Securing an Add-On Child
Restraint in the Vehicle

{

Warning

A child can be seriously injured or
killed in a crash if the child
restraint is not properly secured in
the vehicle. Secure the child

(Continued)

Warning (Continue d)

restraint properly in the vehicle
using the vehicle’s safety belt or
LATCH system, following the
instructions that came with that
child restraint and the instructions
in this manual.

To help reduce the chance of injury,
the child restraint must be secured
in the vehicle. Child restraint
systems must be secured in vehicle
seats by lap belts or the lap belt
portion of a lap-shoulder belt, or by
the LATCH system. See Lower

Anchors and Tethers for Children
(LATCH System) 0 85. Children can

be endangered in a crash if the child
restraint is not properly secured in
the vehicle.

When securing an add-on child
restraint, refer to the instructions
that come with the restraint which
may be on the restraint itself or in a
booklet, or both, and to this manual.
The child restraint instructions are

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

84 Seats and Restraints

important, so if they are not
available, obtain a replacement
copy from the manufacturer.

Keep in mind that an unsecured
child restraint can move around in a
collision or sudden stop and injure
people in the vehicle. Be sure to
properly secure any child restraint in
the vehicle — even when no child is
in it.

In some areas of the United States
and Canada, Certified Child
Passenger Safety Technicians
(CPSTs) are available to inspect
and demonstrate how to correctly
use and install child restraints. In
the U.S., refer to the National
Highway Traffic Safety
Administration (NHTSA) website to
locate the nearest child safety seat
inspection station. For CPST
availability in Canada, check with
Transport Canada or the Provincial
Ministry of Transportation office.

Securing the Child Within the
Child Restraint

{

Warning

A child can be seriously injured or
killed in a crash if the child is not
properly secured in the child
restraint. Secure the child
properly following the instructions
that came with that child restraint.

Where to Put the
Restraint

According to accident statistics,
children and infants are safer when
properly restrained in an appropriate
child restraint secured in a rear
seating position.

Whenever possible, children aged
12 and under should be secured in
a rear seating position.

Never put a rear-facing child
restraint in the front. This is because
the risk to the rear-facing child is so
great if the airbag deploys.

{

Warning

A child in a rear-facing child
restraint can be seriously injured
or killed if the front passenger
airbag inflates. This is because
the back of the rear-facing child
restraint would be very close to
the inflating airbag. A child in a
forward-facing child restraint can
be seriously injured or killed if the
front passenger airbag inflates
and the passenger seat is in a
forward position.

Even if the passenger sensing
system has turned off the front
passenger frontal airbag, no
system is fail-safe. No one can
guarantee that an airbag will not
deploy under some unusual
circumstance, even though it is
turned off.

Secure rear-facing child restraints
in a rear seat, even if the airbag
is off. If you secure a
forward-facing child restraint in

(Continued)

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 85

Warning (Continue d)

the front seat, always move the
front passenger seat as far back
as it will go. It is better to secure
the child restraint in a rear seat.

See Passenger Sensing System
0 72 for additional information.

When securing a child restraint in a
rear seating position, study the
instructions that came with the child
restraint to make sure it is
compatible with this vehicle.

Child restraints and booster seats
vary considerably in size, and some
may fit in certain seating positions
better than others.

Depending on where you place the
child restraint and the size of the
child restraint, you may not be able
to access adjacent safety belts or
LATCH anchors for additional
passengers or child restraints.
Adjacent seating positions should
not be used if the child restraint
prevents access to or interferes with
the routing of the safety belt.

Wherever a child restraint is
installed, be sure to follow the
instructions that came with the child
restraint system and secure the
child restraint system properly.

Keep in mind that an unsecured
child restraint can move around in a
collision or sudden stop and injure
people in the vehicle. Be sure to
properly secure any child restraint in
the vehicle — even when no child is
in it.

Lower Anchors and
Tethers for Children
(LATCH System)

The LATCH system secures a child
restraint during driving or in a crash.
LATCH attachments on the child
restraint are used to attach the child
restraint to the anchors in the
vehicle. The LATCH system is
designed to make installation of a
child restraint easier.

In order to use the LATCH system in
your vehicle, you need a child
restraint that has LATCH
attachments. LATCH-compatible

rear-facing and forward-facing child
seats can be properly installed
using either the LATCH anchors or
the vehicle’s safety belts. Do not
use both the safety belts and the
LATCH anchorage system to secure
a rear-facing or forward-facing
child seat.

Booster seats use the vehicle’s
safety belts to secure the child in
the booster seat. If the manufacturer
recommends that the booster seat
be secured with the LATCH system,
this can be done as long as the
booster seat can be positioned
properly and there is no interference
with the proper positioning of the
lap-shoulder belt on the child.

Make sure to follow the instructions
that came with the child restraint,
and also the instructions in this
manual.

When installing a child restraint with
a top tether, you must also use
either the lower anchors or the
safety belts to properly secure the
child restraint. A child restraint must
never be installed using only the top
tether.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

86 Seats and Restraints

The LATCH anchorage system can
be used until the combined weight
of the child plus the child restraint is

29.5 kg (65 lbs). Use the safety belt
alone instead of the LATCH
anchorage system once the
combined weight is more than

29.5 kg (65 lbs).

The following explains how to attach
a child restraint with these
attachments in the vehicle.

Not all vehicle seating positions or
child restraints have lower anchors
and attachments or top tether
anchors and attachments. In this
case, the safety belt must be used
(with top tether where available) to
secure the child restraint. See

Securing Child Restraints (Rear
Seat) 0 92 or Securing Child
Restraints (Front Passenger
Seat) 0 94.

Lower Anchors

Lower anchors (1) are metal bars
built into the vehicle. There are two
lower anchors for each LATCH
seating position that will
accommodate a child restraint with
lower attachments (2).

Top Tether Anchor

A top tether (3, 4) anchors the top of
the child restraint to the vehicle.
A top tether anchor is built into the
vehicle. The top tether attachment
hook (2) on the child restraint
connects to the top tether anchor in
the vehicle in order to reduce the
forward movement and rotation of
the child restraint during driving or in
a crash.

Your child restraint may have a
single tether (3) or a dual tether (4).
Either will have a single attachment
hook (2) to secure the top tether to
the anchor.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 87

Some child restraints that have a
top tether are designed for use with
or without the top tether being
attached. Others require the top
tether always to be attached.

In Canada, the law requires that
forward-facing child restraints have
a top tether, and that the tether be
attached. Be sure to read and follow
the instructions for your child
restraint.

Lower Anchor and Top Tether
Anchor Locations

Rear Seat

i : Seating positions with top

tether anchors.

j : Seating positions with two lower

anchors.

To assist in locating the lower
anchors, each seating position with
lower anchors has two labels, near
the crease between the seatback
and the seat cushion.

To assist in locating the top tether
anchors, the top tether anchor
symbol is near the top tether
anchors.

Top Tether Anchors

The top tether anchors for each rear
seating position are on the back of
the rear seatback. The rear
compartment storage panel/cover
might need to be adjusted to access
the anchors. Be sure to use an
anchor on the same side of the
vehicle as the seating position
where the child restraint will be
placed.

Do not secure a child restraint in a
position without a top tether anchor
if a national or local law requires
that the top tether be attached, or if

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

88 Seats and Restraints

the instructions that come with the
child restraint say that the top tether
must be attached.

According to accident statistics,
children and infants are safer when
properly restrained in a child
restraint system or infant restraint
system secured in a rear seating
position. See Where to Put the
Restraint 0 84 for additional
information.

Securing a Child Restraint with
the LATCH System

{

Warning

If a LATCH-type child restraint is
not attached to anchors, the child
restraint will not be able to protect
the child correctly. In a crash, the
child could be seriously injured or
killed. Install a LATCH-type child
restraint properly using the
anchors, or use the vehicle's
safety belts to secure the
restraint, following the instructions

(Continued)

Warning (Continue d)

that came with the child restraint
and the instructions in this
manual.

{

Warning

To reduce the risk of serious or
fatal injuries during a crash, do
not attach more than one child
restraint to a single anchor.
Attaching more than one child
restraint to a single anchor could
cause the anchor or attachment
to come loose or even break
during a crash. A child or others
could be injured.

{

Warning

Children can be seriously injured
or strangled if a shoulder belt is
wrapped around their neck. The

(Continued)

Warning (Continue d)

shoulder belt can tighten but
cannot be loosened if it is locked.
The shoulder belt locks when it is
pulled all the way out of the
retractor. It unlocks when the
shoulder belt is allowed to go all
the way back into the retractor,
but it cannot do this if it is
wrapped around a child’s neck.
If the shoulder belt is locked and
tightened around a child’s neck,
the only way to loosen the belt is
to cut it.

Buckle any unused safety belts
behind the child restraint so
children cannot reach them. Pull
the shoulder belt all the way out
of the retractor to set the lock,
and tighten the belt behind the
child restraint after the child
restraint has been installed.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 89

Caution

Do not let the LATCH
attachments rub against the
vehicle’s safety belts. This may
damage these parts. If necessary,
move buckled safety belts to
avoid rubbing the LATCH
attachments.

Do not fold the rear seatback
when the seat is occupied. Do not
fold the empty rear seat with a
safety belt buckled. This could
damage the safety belt or the
seat. Unbuckle and return the
safety belt to its stowed position,
before folding the seat.

If you need to secure more than one
child restraint in the rear seat, see
Where to Put the Restraint 0 84.

1. Attach and tighten the lower
attachments to the lower
anchors. If the child restraint
does not have lower
attachments or the desired
seating position does not have
lower anchors, secure the child

restraint with the top tether and
the safety belts. Refer to the
child restraint manufacturer
instructions and the
instructions in this manual.

1.1. Find the lower anchors
for the desired seating
position.

1.2. Put the child restraint on
the seat.

If the head restraint
interferes with the proper
installation of the child
restraint, the head
restraint may be
removed. See “Head
Restraint Removal and
Reinstallation” at the end
of this section.

1.3. Attach and tighten the
lower attachments on the
child restraint to the lower
anchors.

2. If the child restraint
manufacturer recommends that
the top tether be attached,
adjust the top tether to its full
length and attach it to the

anchor, if equipped. Refer to
the child restraint instructions
and the following steps:

2.1. Find the top tether
anchor.

2.2. If you have an adjustable
head restraint, raise the
head restraint.

2.3. Route, attach, and tighten
the top tether according
to your child restraint
instructions and the
following instructions:

If the position you are
using does not have a
headrest or head restraint
and you are using a
single tether, route the
tether over the seatback.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

90 Seats and Restraints

If the position you are
using does not have a
headrest or head restraint
and you are using a dual
tether, route the tether
over the seatback.

If the position you are
using has an adjustable
headrest or head restraint
and your are using a dual
tether, raise the headrest

or head restraint and
route the tether under the
headrest or head restraint
and around the headrest
or head restraint posts.

If the position being used
has an adjustable
headrest or head restraint
and a single tether is
being used, route the
tether between the
headrest or head restraint
posts.

3. Before placing a child in the
child restraint, make sure it is
securely held in place. To
check, grasp the child restraint
at the LATCH path and attempt
to move it side to side and
back and forth. There should

be no more than 2.5 cm (1 in) of
movement, for proper
installation.

Head Restraint Removal and
Reinstallation

The second row outboard head
restraints can be removed if they
interfere with the proper installation
of the child restraint.

To remove the head restraint:

1. Partially fold the seatback
forward. See Rear Seats 0 56
for additional information.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 91

2. Press both buttons on the head
restraint posts at the same
time, and pull up on the head
restraint.

3. Store the head restraint in the
cargo area of the vehicle.

4. When the child restraint is
removed, reinstall the head
restraint before the seating
position is used.

{

Warning

With head restraints that are not
installed and adjusted properly,
there is a greater chance that
occupants will suffer a neck/
spinal injury in a crash. Do not
drive until the head restraints for
all occupants are installed and
adjusted properly.

To reinstall the head restraint:

1. Insert the head restraint posts
into the holes in the top of the
seatback. The notches on the
posts must face the driver side
of the vehicle.

2. Push the head restraint down.

3. Try to move the head restraint
to make sure that it is locked in
place.

Replacing LATCH System
Parts After a Crash

{

Warning

A crash can damage the LATCH
system in the vehicle. A damaged
LATCH system may not properly
secure the child restraint,
resulting in serious injury or even
death in a crash. To help make
sure the LATCH system is
working properly after a crash,
see your dealer to have the
system inspected and any
necessary replacements made as
soon as possible.

If the vehicle has the LATCH system
and it was being used during a
crash, new LATCH system parts
may be needed.

New parts and repairs may be
necessary even if the LATCH
system was not being used at the
time of the crash.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

92 Seats and Restraints

Securing Child Restraints
(Rear Seat)

When securing a child restraint in a
rear seating position, study the
instructions that came with the child
restraint to make sure it is
compatible with this vehicle.

If the child restraint has the LATCH
system, see Lower Anchors and

Tethers for Children (LATCH
System) 0 85 for how and where to

install the child restraint using
LATCH. If a child restraint is
secured in the vehicle using a
safety belt and it uses a top tether,
see Lower Anchors and Tethers for
Children (LATCH System) 0 85 for
top tether anchor locations.

Do not secure a child seat in a
position without a top tether anchor
if a national or local law requires
that the top tether be anchored, or if
the instructions that come with the
child restraint say that the top strap
must be anchored.

If the child restraint or vehicle seat
position does not have the LATCH
system, you will be using the safety

belt to secure the child restraint in
this position. Be sure to follow the
instructions that came with the child
restraint. Secure the child in the
child restraint when and as the
instructions say.

If more than one child restraint
needs to be installed in the rear
seat, be sure to read Where to Put
the Restraint 0 84.

1. Put the child restraint on
the seat.

2. Pick up the latch plate, and run
the lap and shoulder portions
of the vehicle's safety belt
through or around the restraint.
The child restraint instructions
will show you how.

3. Push the latch plate into the
buckle until it clicks.

Position the release button on
the buckle so that the safety
belt could be quickly unbuckled
if necessary.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 93

4. Pull the shoulder belt all the
way out of the retractor to set
the lock. When the retractor
lock is set, the belt can be
tightened but not pulled out of
the retractor.

5. To tighten the belt, push down
on the child restraint, pull the
shoulder portion of the belt to
tighten the lap portion of the
belt, and feed the shoulder belt
back into the retractor. When
installing a forward-facing child
restraint, it may be helpful to
use your knee to push down on
the child restraint as you
tighten the belt.

Try to pull the belt out of the
retractor to make sure the
retractor is locked. If the
retractor is not locked, repeat
Steps 4 and 5.

6. If the child restraint has a top
tether, follow the child restraint
manufacturer's instructions
regarding the use of the top
tether. See Lower Anchors and

Tethers for Children (LATCH
System) 0 85 for more

information.

7. Before placing a child in the
child restraint, make sure it is
securely held in place. To
check, grasp the child restraint
at the safety belt path and
attempt to move it side to side
and back and forth. When the
child restraint is properly
installed, there should be no
more than 2.5 cm (1 in) of
movement.

To remove the child restraint,
unbuckle the vehicle safety belt and
let it return to the stowed position.
If the top tether is attached to a top
tether anchor, disconnect it.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

94 Seats and Restraints

Securing Child Restraints
(Front Passenger Seat)

This vehicle has airbags. A rear
seat is a safer place to secure a
forward-facing child restraint. See
Where to Put the Restraint 0 84.

In addition, the vehicle has a
passenger sensing system which is
designed to turn off the front
outboard passenger frontal airbag
and knee airbag under certain
conditions. See Passenger Sensing

System 0 72 and Passenger Airbag
Status Indicator 0 118 for more

information on this, including
important safety information.

Never put a rear-facing child seat in
the front. This is because the risk to
the rear-facing child is so great,
if the airbag deploys.

{

Warning

A child in a rear-facing child
restraint can be seriously injured
or killed if the front outboard
passenger frontal airbag inflates.

(Continued)

Warning (Continue d)

This is because the back of the
rear-facing child restraint would
be very close to the inflating
airbag. A child in a forward-facing
child restraint can be seriously
injured or killed if the front
outboard passenger frontal airbag
inflates and the passenger seat is
in a forward position.

Even if the passenger sensing
system has turned off the front
outboard passenger airbag(s), no
system is fail-safe. No one can
guarantee that an airbag will not
deploy under some unusual
circumstance, even though the
airbag(s) are off.

Secure rear-facing child restraints
in a rear seat, even if the
airbag(s) are off. If you secure a
forward-facing child restraint in
the front outboard passenger
seat, always move the seat as far

(Continued)

Warning (Continue d)

back as it will go. It is better to
secure the child restraint in a
rear seat.

See Passenger Sensing System
0 72 for additional information.

If the child restraint uses a top
tether, see Lower Anchors and

Tethers for Children (LATCH
System) 0 85 for top tether anchor

locations.

Do not secure a child seat in a
position without a top tether anchor
if a national or local law requires
that the top tether be anchored, or if
the instructions that come with the
child restraint say that the top strap
must be anchored.

In Canada, the law requires that
forward-facing child restraints have
a top tether, and that the tether be
attached.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Seats and Restraints 95

When using the lap-shoulder belt to
secure the child restraint in this
position, follow the instructions that
came with the child restraint and the
following instructions:

1. Move the seat rearward as far
back as it will go and raise the
seat upward as far up as it will
go, before securing the
forward-facing child restraint.
Move the seat upward or the
seatback to an upright position,
if needed, to get a tight
installation of the child
restraint.

When the passenger sensing
system has turned off the front
outboard passenger frontal
airbag and knee airbag, the off
indicator on the passenger
airbag status indicator should
light and stay lit when you start
the vehicle. See Passenger
Airbag Status Indicator 0 118.

2. Put the child restraint on
the seat.

3. Pick up the latch plate, and run
the lap and shoulder portions
of the vehicle's safety belt

through or around the restraint.
The child restraint instructions
will show you how.

Tilt the latch plate to adjust the
belt if needed.

4. Push the latch plate into the
buckle until it clicks.

Position the release button on
the buckle so that the safety
belt could be quickly unbuckled
if necessary.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

96 Seats and Restraints

5. Pull the shoulder belt all the
way out of the retractor to set
the lock. When the retractor
lock is set, the belt can be
tightened but not pulled out of
the retractor.

6. To tighten the belt, push down
on the child restraint, pull the
shoulder portion of the belt to
tighten the lap portion of the
belt, and feed the shoulder belt
back into the retractor. When
installing a forward-facing child
restraint, it may be helpful to
use your knee to push down on
the child restraint as you
tighten the belt.

Try to pull the belt out of the
retractor to make sure the
retractor is locked. If the
retractor is not locked, repeat
Steps 5 and 6.

7. Before placing a child in the
child restraint, make sure it is
securely held in place. To
check, grasp the child restraint
at the safety belt path and
attempt to move it side to side
and back and forth. When the
child restraint is properly
installed, there should be no
more than 2.5 cm (1 in) of
movement.

If the airbags are off, the off
indicator in the passenger airbag
status indicator will come on and
stay on when the vehicle is started.

If a child restraint has been installed
and the off symbol is not lit, see “If
the On Indicator Is Lit for a Child
Restraint” under Passenger Sensing
System 0 72.

To remove the child restraint,
unbuckle the vehicle's safety belt
and let it go back all the way.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Storage 97

Storage

Storage Compartments

Storage Compartments . . . . . . . . 97

Glove Box . . . . . . . . . . . . . . . . . . . . . 97

Cupholders . . . . . . . . . . . . . . . . . . . . 97

Front Storage . . . . . . . . . . . . . . . . . . 97

Sunglasses Storage . . . . . . . . . . . 97

Rear Storage . . . . . . . . . . . . . . . . . . 98

Center Console Storage . . . . . . . 98

Additional Storage Features

Cargo Cover . . . . . . . . . . . . . . . . . . . 99

Cargo Tie-Downs . . . . . . . . . . . . . . 99

Convenience Net . . . . . . . . . . . . . 100

Roof Rack System

Roof Rack System . . . . . . . . . . . 100

Storage
Compartments

{

Warning

Do not store heavy or sharp
objects in storage compartments.
In a crash, these objects may
cause the cover to open and
could result in injury.

Glove Box

Open the glove box by lifting up on
the lever.

Cupholders

Two cupholders are in the center
console. Cupholders may be located
in the second row seat armrest. To
access, pull the armrest down.

Front Storage

There is storage next to the steering
wheel. Lift the handle to access.

Sunglasses Storage

If equipped, sunglasses storage is
on the overhead console. Press the
fixed button on the cover and
release to access.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

98 Storage

Rear Storage

There is storage in the floor of the
rear cargo area. Lift the handle to
access. There is a removable
divider to help organize.

Use the hook underneath to hold
open the cargo floor cover.

Center Console Storage

Press the button to access the
storage in the center console.
If equipped there is an auxiliary
jack, an SD card reader, and a
single or dual USB port inside.

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

8534310) - 2016 - crc - 2/29/16

Storage 99

There is a small covered bin directly
in front of the center console. Use
the handle to open the covered bin.
There is a power outlet inside.

Additional Storage
Features

Cargo Cover

{

Warning

An unsecured cargo cover could
strike people in a sudden stop or
turn, or in a crash. Store the
cargo cover securely or remove it
from the vehicle.

{

Warning

Do not place objects on the cargo
cover. Sudden stops or turns can
cause objects to be thrown in the
vehicle. You or others could be
injured.

If equipped, use the cargo cover to
cover items in the rear of the
vehicle.

To remove the cover from the
vehicle, pull both ends toward each
other. To reinstall, place each end of
the cover in the holes behind the
rear seat.

Cargo Tie-Downs

The vehicle may be equipped with
six cargo tie-downs in the rear
compartment.