Buick 2016 Encore Getting Started Guide

Getting to Know Your
2016 Encore
Review this Quick Reference Guide for an overview of some important features in your Buick Encore. More detailed information can be found in your Owner Manual. Some optional equipment described in this guide may not be included in your vehicle. For easy reference, keep
this guide with your Owner Manual in your glove box.
1
Instrument Panel
Cruise Control/
Forward Collision
AlertF Buttons
Driver Information
Center Controls
(on lever)
Driver
Information
Center
Audio Steering
Wheel Controls
Windshield
Wipers Lever
2
Power Mirrors
Control
Symbols
Power Steering
Traction Control Off
Engine Coolant Temperature
Brake System Warning
Exterior Lamps
Control
Instrument Panel
Illumination
Control
Cruise Control Set
Low Tire Pressure
StabiliTrak Active
StabiliTrak Off
Storage
Compartment
Security
Check Engine
Oil Pressure
Charging System
Tilt/Telescope
Steering Wheel
Lever
Infotainment
Display
StabiliTrak
Button
Hazard
Warning
Flashers
Button
Audio System/
Navigation
SystemF Controls
Climate
Controls
Driver’s
Heated Seat
Button
F
Optional equipment
Accessory Power
F
Port/Auxiliary
Safety Belt Reminder
Airbag Readiness
Antilock Brake System
Outlet/USB
Input Jack
Lane Departure
Warning
F
Button
Lane Departure Warning
Lights On
Forward Collision Alert
Ultrasonic
Park Assist
F
Button
Heated
Steering
Wheel
Button
Standard audio system shown
F
Passenger’s
Heated Seat
F
Button
Refer to your Owner Manual to learn about the information being relayed by the lights, gauges and indicators on the instrument cluster.
See In Brief in your Owner Manual.
3
Remote Vehicle Start
Use Remote Vehicle Start to start the engine from outside the vehicle. During a remote start, the engine will run for 10 minutes.
Press and release the Lock button and then press and hold the Remote Start
button until the turn signal lamps ash. After entering the vehicle, turn the ignition to
the On position.
Press and hold the button until the parking lamps turn off to cancel a remote start.
Note: To change the remote start settings, go to Remote Lock, Unlock, Start in the Vehicle Settings menu.
See Keys, Doors and Windows in your Owner Manual.
F
Engine Stop/Start Operation
A fuel-saving stop/start system has been integrated with the 1.4L turbocharged engine. While driving, when the brakes are applied and the vehicle is at a complete stop, the engine may turn off, depending on conditions. When the engine stops, the tachometer gauge will read AUTO STOP. The audio system, climate controls and other accessories will continue to operate. Upon releasing the brake pedal or applying the accelerator pedal, the engine will restart. After turning off the engine, the tachometer gauge will read OFF.
The engine may remain running or restart if:
• A minimum vehicle speed is not reached.
• The shift lever is in any gear other than Drive (D).
• The battery state of charge is low.
• The outside temperature is not in the required operating range.
• The engine or transmission is not at the required operating temperature.
• The climate control system requires the engine to run based on the climate control or defog setting. Select the ECO air conditioning setting (green A/C indicator) to maximize the frequency and duration of Auto Stops.
• The Auto Stop time is greater than two minutes.
F
See Driving and Operating in your Owner Manual.
Express Power Windows
All windows have an express-down feature. Fully press the desired window switch for
the window to open completely.
The driver’s window has an express-up feature. Fully pull the driver’s window switch
for the window to close completely.
See Keys, Doors and Windows in your Owner Manual.
Tilt/Telescope Steering Wheel
With the vehicle parked, push down the lever on the left side of the steering column to
adjust the steering wheel. The steering wheel can then be moved up or down and in or out. Pull up the lever to lock the steering wheel in place.
4
F
Optional equipment
See Instruments and Controls in your Owner Manual.
Seats
Power Driver’s Seat
D
C
A
B
Memory SeatF
Set Memory Positions
1. Adjust the driver’s seat and power outside mirrors to the desired positions.
2. Press and hold the Memory button and button 1 (D) on the outboard side of the driver’s seat until a beep sounds.
3. Repeat these steps using button 2 for a second driver.
Recall Memory Positions
Press and hold button 1 or 2 until the stored position is reached.
Note: To change the memory recall settings, go to Comfort and Convenience in the Vehicle Settings menu.
Folding Front Passenger Seat
With the head restraint lowered and the seat moved as far back as possible, pull the
recline lever on the outboard side of the front passenger seat to fold the seat at.
Folding Rear Seats
A. Lumbar Adjustment
Press the small control to adjust the
lumbar support.
B. 6-way Seat Adjustment
Move the large control to move the seat
forward or rearward and to tilt, raise or lower the seat.
C. Seatback Recline Adjustment
Lift the lever to adjust the seatback
position.
D. Memory Seat Controls
A
F
Optional equipment
1. Unbuckle the safety belts and return them to their normal stowed position.
2. Lower the head restraints.
A
3. Pull up the tab (A) located at the center front of the seat cushion.
4. Pull up the rear edge of the seat cushion and tilt it forward.
5. Pull the lever (B) on top of the seatback. When the red marking is visible, the seatback is unlatched.
6. Fold down the seatback.
B
7. When unfolding the seats, make sure the safety belt buckles are accessible above the seat cushions.
See Seats and Restraints in your Owner Manual.
5
Loading...
+ 11 hidden pages