Commercial Snowblower
Series :: I - IV
Models :: 60", 66", 74", 84"
Snowblower
DEVELOPED FOR SKID STEERS
MODEL B6022HSB-1
B6022HSB-2
B6622HSB-1
B6622HSB-2
B7422HSB-1
B7422HSB-2
B7424HSB-3
B7424HSB-4
B8424HSB-3
B8424HSB-4
B84SB (PTO DRIVE)
B6622HSB-3
Cutting width 60" 66" 74" 74" 84" 84"
Cutting height 28" 30" 30" 30" 30" 30"
Mount type Skid steer Skid steer Skid steer Skid steer Skid steer Cat. III, 3-point
Hydraulic requirements 13 - 22 GPM
2000 psi min.
System controls & drive Hydraulic load sensing
Block ow adjustable
Fan 4-blade 4-blade 4-blade 4-blade 4-blade 4-blade
Fan diameter 21 ½" 21 ½" 21 ½" 23 ½" 23 ½" 23 ½"
Fan depth 7 ½" 7 ½" 7 ½" 7 ½" 7 ½" 7 ½"
Replaceable fan housing 7 gauge 7 gauge 7 gauge 7 gauge 7 gauge 7 gauge
Auger diameter 15" 15" 15" 15" 20" 20"
Auger center diameter 3" od x 0.250 wall 3" od x 0.250 wall 3" od x 0.250 wall 3" od x 0.250 wall 3" od x 0.250 wall 3" od x 0.250 wall
Auger thickness ⁄" ⁄" ⁄" ⁄" ⁄" ⁄"
Drive fan Hydraulic w/#80 chain Hydraulic w/#80 chain Hydraulic w/#80 chain Hydraulic w/#80 chain Hydraulic w/#80 chain Hydraulic w/#80 chain
Drive auger Hydraulic
w/#60H chain
Body housing 10 gauge 7 gauge 7 gauge 7 gauge 7 gauge 7 gauge
Spout rotator Hydraulic - 230° Hydraulic - 230° Hydraulic - 230° Hydraulic - 230° Hydraulic - 230° Hydraulic - 230°
Spout deector Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic
Cutting edge ½" x 4" beveled
Replaceable
Skid shoes Adjustable and
replaceable
Truck loading spout Optional Optional Optional Optional Optional Optional
Weight 1070 lbs 1260 lbs 1280 lbs 1193 lbs 1305 lbs 1317 lbs
13 - 22 GPM
2000 psi min.
Hydraulic load sensing
Block ow adjustable
Hydraulic
w/#60H chain
½" x 4" beveled
Replaceable
Adjustable and
replaceable
13 - 22 GPM
2000 psi min.
Hydraulic load sensing
Block ow adjustable
Hydraulic
w/#60H chain
½" x 4" beveled
Replaceable
Adjustable and
replaceable
20 - 32 GPM
2000 psi min.
Hydraulic load sensing
Block ow adjustable
Hydraulic
w/#60H chain
½" x 4" beveled
Replaceable
Adjustable and
replaceable
20 - 32 GPM
2000 psi min.
Hydraulic load sensing
Block ow adjustable
Hydraulic
w/#60H chain
½" x 4" beveled
Replaceable
Adjustable and
replaceable
10 GPM
1000 psi min.
PTO w/shear pin
#60H chain
½" x 4" beveled
Replaceable
Adjustable and
replaceable
DESIGNED FOR COMMERCIAL USE
e Buhler Commercial Snowblower was developed to meet the
increasing demand for reliable and powerful skid steer mounted
attachments. Based on the design of the durable and reliable
3-point hitch mounted Buhler Allied and Buhler Farm King
PTO-driven snowblowers, the Buhler Commercial Snowblower
is one of the most sophisticated snowblowers on the market.
Four series are available in a variety of widths. e series designation (I-IV) is based on the size of the hydraulic motor, which is
determined by the hydraulic ow capacity of the skid steer or
wheel loader. A PTO-driven model with a 3-point hitch mount
is also available.
All moving components of the commercial snowblower are
hydraulically driven. e hydraulic ow from the skid steer
[1] Hydraulic ow is routed through a circuit for maximum eciency.
[2] A single auger and four blade fan is standard.
runs into the main block on the snowblower to power the fan,
auger, spout rotator and deector. Much of the hydraulic ow
is dedicated to the fan which requires constant power to throw
snow. Most snowblower functions are managed by the skid steer
hydraulic levers. A magnetic electronic control box for the spout
rotator and deector mounts easily in the cab.
Buhler Commercial Snowblowers attach to skid steer mounting
plates and are compatible with most skid steer brands. e body
of the snowblower is built with heavy-gauge steel and features a
replaceable cutting edge. e fan housing has a replaceable steel
liner and the inside of the spout includes a replaceable poly liner.
Adjustable skid shoes can be used to set the cutting height and
are standard on all models. 7' or 10' truck loading spouts are
available.
[3] Hydraulic spout rotator and deector for precise snow placement.
[4] A heavy duty hydraulic motor powers the auger.
[1]
[2]
[3]
[4]
Established in 1933 as an agricultural equipment manufacturer, Standard Gas Engine Works was purchased by John Buhler in 1969. Through steady
expansion, new products and acquisitions, the company has experienced steady growth and has evolved into one brand name: Buhler. Over the years,
many brands have joined the Buhler family: Farm King, Allied, Inland and Versatile. Buhler maintains several well-stocked parts warehouses and is
committed to continuous product improvement and incorporating new value-added features. That tradition of excellence will continue well into the future.
301 Mountain Street South
Morden :: Manitoba Canada R6M 1X7
Ph.: 204.822.4467 :: Fax: 204.822.6348
Toll Free: 888.524.1004
E-mail: info@buhler.com
www.buhler.com
TSX:BUI
Equipment shown is subject to change without notice.
©2007 Buhler Manufacturing. Printed in Canada.
Ref: 072007-5000-PG
Loading...