Buffalo WLI2-PCI-G54S User Manual
Quick Setup Guide
125* High Speed Mode™
Wireless PCI Adapter
WLI2-PCI-G54S
Use this guide to quickly and easily install your 125* High Speed Mode™ Wireless
PCI Adapter. For advanced setup and configuration information, refer to the
Wireless PCI Adapter Manual, located on the Air Navigator CD.
Contents
◗ 125* High Speed Mode™ Wireless PCI Adapter (WLI2-PCI-G54S)
◗ Brass Buffalo Antenna Adapter
◗ Air Navigator CD
◗ Quick Setup Guides
◗ Warranty Card
If any items are missing, please contact the reseller from whom you purchased this
product.
System Requirements
◗ PC with an available PCI Slot.
◗ Windows 98 SE, ME, 2000, XP, 2003
◗ 10 MB of available disk space
◗ 802.11b or 802.11g access point (Infrastructure Mode) OR a different computer
with an 802.11b or 802.11g wireless adapter (Ad-hoc Mode).
www.buffalotech.com/wireless
PY00-29023-DM20
Installation
Installing and Configuring the Wireless PCI Adapter:
Windows 98/ME/2000/XP
Step 1 Installing the Wireless PCI Adapter Drivers
Caution: Complete Step 1 before inserting the Wireless PCI Adapter.
◗ Insert the Air Navigator CD into the CD-ROM drive of the PC. The Air Navigator
Setup Wizard launches
automatically. If the Air Navigator
Setup Wizard does not launch
automatically, launch the
wizard manually by selecting
Start » Run to open the Run
dialog box. Enter D:\Setup.
exe in the Open field, where D:
represents the letter assigned
to the CD-ROM drive. If another
letter is assigned to the CD-ROM
drive, your command should reflect that difference. Click the
the wizard.
OK button to launch
◗ Select Install Wireless
Adapter.
begin the installation process.
Click the OK button to
◗ Review the Software License
Agreement. Click the Yes button
to confirm your agreement with
the terms and continue installing
the Wireless PCI Adapter drivers.
Click the No button to abort the
installation process. Also, close
the onscreen help that appears; it
is not necessary for this setup.
2
Installation
Windows XP Installation
& Configuration
Step 2 Installing the Wireless PCI Adapter
◗ Power off the desktop
PC. Firmly insert the Wireless PCI Adapter
available PCI slot. PCI slots
are located inside the desktop computer. Please con
sult the PC Manufacturer's
documentation for PCI installation instructions. Once
the Wireless PCI Adapter
is installed correctly, attach
the included black antenna
on the back of the PCI card,
start the PC and let it boot
into Windows. Then, the
Found New Hardware Wizard will launch automatically. If the
Hardware Wizard does not launch, turn off the computer, remove the Wireless
PCI Adapter, reinsert it into another PCI slot and restart the computer.
into an
Found New
-
◗ Select Install the software
automatically. Click the
button.
3
Next
Installation
◗ Select the driver you
want to install. If multiple
drivers are listed, select the
most recent driver version.
Click the Next button.
◗ If a window opens,
stating that your driver has
not passed Windows Logo
testing, click the Continue
Anyway button. When
the Wireless PCI Adapter
is successfully installed,
click the Finish button
and restart your PC if
prompted.
4
Loading...